private void SqlLogin_Load(object sender, EventArgs e)
{
cB_sqlServerType.SelectedIndex = 0;
tB_Tester.Text = IniFile.GetString("sqlinfo", "operator", "test", Application.StartupPath + "\\SqlInfo.ini");
tB_sqladdr.Text = IniFile.GetString("sqlinfo", "sqladdr", "0.0.0.0", Application.StartupPath + "\\SqlInfo.ini");
tB_sqldatabase.Text = IniFile.GetString("sqlinfo", "sqlname", "pim-datebase", Application.StartupPath + "\\SqlInfo.ini");
tB_sqluser.Text = IniFile.GetString("sqlinfo", "sqluser", "sa", Application.StartupPath + "\\SqlInfo.ini");
if (IniFile.GetString("sqlinfo", "deson", "0", Application.StartupPath + "\\SqlInfo.ini") == "1")
{
checkBox1.Checked = true;
string str_sql = IniFile.GetString("sqlinfo", "sqlpw", "123", Application.StartupPath + "\\SqlInfo.ini");
str_sql = DecryptDES(str_sql);
if (str_sql != "Error")
{
tB_sqlpassward.Text = str_sql;
}
string str_ftp = IniFile.GetString("sqlinfo", "ftppw", "123", Application.StartupPath + "\\SqlInfo.ini");
str_ftp = DecryptDES(str_ftp);
if (str_ftp != "Error")
{
tB_ftppw.Text = str_ftp;
}
}
tB_ftpaddr.Text = IniFile.GetString("sqlinfo", "ftpaddr", "0.0.0.0:21", Application.StartupPath + "\\SqlInfo.ini");
tB_ftpuser.Text = IniFile.GetString("sqlinfo", "ftpuser", "san", Application.StartupPath + "\\SqlInfo.ini");
}
void SaveScript()
{
string strPath = Application.StartupPath + "\\settings\\JcScript.ini";
//清空
int count = int.Parse(IniFile.GetString("Script", "count", "0", strPath));
for (int i = 1; i <= count; i++)
{
IniFile.SetString("Script", "N" + i.ToString(), "", strPath);
}
//开始SAVE
int n = m_listScript.Count;
IniFile.SetString("Script", "count", (n - 1).ToString(), strPath);
for (int i = 1; i < n; i++)
{//列表序号0为默认配置，不保存
string strValue = m_listScript[i].settings.projectName + "," +
((int)m_listScript[i].settings.SweepType).ToString() + "," +
((int)m_listScript[i].settings.PimSchema).ToString() + "," +
((int)m_listScript[i].settings.PimOrder).ToString() + "," +
m_listScript[i].settings.F1s.ToString() + "," +
m_listScript[i].settings.F1e.ToString() + "," +
m_listScript[i].settings.F2s.ToString() + "," +
m_listScript[i].settings.F2e.ToString() + "," +
m_listScript[i].settings.Setp1.ToString() + "," +
m_listScript[i].settings.TimeSweepPoints.ToString() + "," +
m_listScript[i].settings.Tx;
IniFile.SetString("Script", "N" + i.ToString(), strValue, strPath);
}
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
channel = int.Parse(IniFile.GetString("spectrum", "channel", "0"));
enableOffset = int.Parse(IniFile.GetString("spectrum", "enableOffset", "1"));
offsetFilePath = IniFile.GetString("spectrum", "offsetFilePath", "");
att = int.Parse(IniFile.GetString("spectrum", "att", "0"));
rbw = int.Parse(IniFile.GetString("spectrum", "rbw", "4"));
vbw = int.Parse(IniFile.GetString("spectrum", "vbw", "4"));
start = float.Parse(IniFile.GetString("spectrum", "start", "800"));
stop = float.Parse(IniFile.GetString("spectrum", "stop", "900"));
min_freq = float.Parse(IniFile.GetString("spectrum", "min_freq", "0.1"));
max_freq = float.Parse(IniFile.GetString("spectrum", "max_freq", "3000"));
min_aph = float.Parse(IniFile.GetString("spectrum", "min_aph", "-30"));
max_aph = float.Parse(IniFile.GetString("spectrum", "max_aph", "-130"));
rev = float.Parse(IniFile.GetString("spectrum", "rev", "0"));
enableRF = int.Parse(IniFile.GetString("spectrum", "enableRF", "0"));
timeRF = int.Parse(IniFile.GetString("spectrum", "timeRF", "200"));
sampleSpan = int.Parse(IniFile.GetString("spectrum", "sampleSpan", "200"));
averageCount = int.Parse(IniFile.GetString("spectrum", "averagecount", "5"));
rxRef = float.Parse(IniFile.GetString("spectrum", "rxRef", "0"));
txRef = float.Parse(IniFile.GetString("spectrum", "txRef", "0"));
List_txRef = IniFile.GetString("spectrum", "txRefTable", "0,0,0,0,0,0,0,0").Split(',');
List_rxRef = IniFile.GetString("spectrum", "rxRefTable", "0,0,0,0,0,0,0,0").Split(',');
}
internal void LoadSettings()
{
string s1 = "";
string s2 = "";
IniFile.SetFileName(fileName);
s1 = IniFile.GetString(sectionName, "tx_p", "");
s2 = IniFile.GetString(sectionName, "tx_f", "");
if (String.IsNullOrEmpty(s1) || String.IsNullOrEmpty(s2))
{
return;
}
//校准表的行数目
int N = IniFile.CountOfItemIn(s1);
//校准表的列数目
int M = IniFile.CountOfItemIn(s2);
if ((N <= 0) || (M <= 0))
{
return;
}
rowHead.Parse(s2, M);
colHead.Parse(s1, N);
FillTable(N, M);
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
port = IniFile.GetString(signalName, "port", "COM1");
limit_vswr = float.Parse(IniFile.GetString(signalName, "limit_vswr", "2.0"));
mode_power = int.Parse(IniFile.GetString(signalName, "mode_power", "0"));
tx_pre = float.Parse(IniFile.GetString(signalName, "tx_pre", "30"));
tx = float.Parse(IniFile.GetString(signalName, "tx", "43"));
enableVswr = int.Parse(IniFile.GetString(signalName, "enableVswr", "1"));
time_vswr = int.Parse(IniFile.GetString(signalName, "time_vswr", "500"));
min_power = float.Parse(IniFile.GetString(signalName, "min_power", "30"));
max_power = float.Parse(IniFile.GetString(signalName, "max_power", "45"));
min_freq = float.Parse(IniFile.GetString(signalName, "min_freq", "930"));
max_freq = float.Parse(IniFile.GetString(signalName, "max_freq", "940"));
min_temp = float.Parse(IniFile.GetString(signalName, "min_temp", "-10"));
max_temp = float.Parse(IniFile.GetString(signalName, "max_temp", "65"));
min_curr = float.Parse(IniFile.GetString(signalName, "min_curr", "0.5"));
max_curr = float.Parse(IniFile.GetString(signalName, "max_curr", "2.5"));
}
private void btnDefault_Click(object sender, EventArgs e)
{
//App_Settings.pim.Clone(this.settings);
//GetPimValues();
//ygq
IniFile.SetFileName(Application.StartupPath + "\\settings\\Settings_Pim.ini");
cbxPimMode.SelectedIndex = int.Parse(IniFile.GetString("pim", "mode", "0"));
int order = int.Parse(IniFile.GetString("pim", "order", "0"));
switch (order)
{
case 3:
cbxPimOrder.SelectedIndex = 0; break;
case 5:
cbxPimOrder.SelectedIndex = 1; break;
case 7:
cbxPimOrder.SelectedIndex = 2; break;
case 9:
cbxPimOrder.SelectedIndex = 3; break;
}
cbxPimUnit.SelectedIndex = int.Parse(IniFile.GetString("pim", "unit", "0"));
nudPimLimit.Value = Convert.ToDecimal(IniFile.GetString("pim", "limit", "-110"));
nudAtt.Value = Convert.ToDecimal(IniFile.GetString("pim", "att_spc", "0"));
nudTx.Value = Convert.ToDecimal(IniFile.GetString("pim", "tx", "43"));
cbxPimSchema.SelectedIndex = int.Parse(IniFile.GetString("pim", "schema", "0"));
//
}
public static bool ClientCom()
{
try
{
string addCom = IniFile.GetString("GPIO_Board", "addrCOm", "", Application.StartupPath + "\\Configures.ini");
string addLan = IniFile.GetString("GPIO_Board", "addrLan", "", Application.StartupPath + "\\Configures.ini");
cic = new com_io_ctl.com_io_ctl(Application.StartupPath + "\\io_mobi2_6.ini");
//cic.OpenCom("COM" + App_Configure.Cnfgs.Comaddr_switch);
if (addCom != "")
{
cic.OpenCom(addCom);
}
else if (addLan != "")
{
cic.TcpConnect(addLan, 4001);
}
else
{
cic.TcpConnect("192.168.1.178", 4001);
}
return(true);
}
catch
{
return(false);
}
}
private void btnLoad_Click(object sender, EventArgs e)
{
//ReadSettingFiles rsfm = new ReadSettingFiles();
//rsfm.FillFiles(App_Configure.Cnfgs.Path_Usr_Pim);
//if (rsfm.ShowDialog() == DialogResult.OK)
//{
// if (File.Exists(App_Configure.Cnfgs.Path_Usr_Pim + "\\" + rsfm.FileName))
// {
// // string File_Usr_Pim = rsfm.FileName;
// Settings_Pim pim = new Settings_Pim(App_Configure.Cnfgs.Path_Usr_Pim + "\\" +
// rsfm.FileName);
// pim.LoadSettings();
// pim.Clone(this.settings);
// GetPimValues();
// }
//}
//rsfm.Dispose();
//ygq
IniFile.SetFileName("D:\\settings\\Settings_Pim.ini");
cbxPimMode.SelectedIndex = int.Parse(IniFile.GetString("pim", "mode", "0"));
int order = int.Parse(IniFile.GetString("pim", "order", "0"));
switch (order)
{
case 3:
cbxPimOrder.SelectedIndex = 0; break;
case 5:
cbxPimOrder.SelectedIndex = 1; break;
case 7:
cbxPimOrder.SelectedIndex = 2; break;
case 9:
cbxPimOrder.SelectedIndex = 3; break;
}
cbxPimUnit.SelectedIndex = int.Parse(IniFile.GetString("pim", "unit", "0"));
nudPimLimit.Value = Convert.ToDecimal(IniFile.GetString("pim", "limit", "-110"));
nudAtt.Value = Convert.ToDecimal(IniFile.GetString("pim", "att_spc", "0"));
nudTx.Value = Convert.ToDecimal(IniFile.GetString("pim", "tx", "43"));
cbxPimSchema.SelectedIndex = int.Parse(IniFile.GetString("pim", "schema", "0"));
//
}
/// <summary>
/// 获取属性值
/// </summary>
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
ishigh = IniFile.GetString("pim", "ishigh", "0") == "1" ? true : false;
//ishigh = false;
tx = float.Parse(IniFile.GetString("pim", "tx", "43.0"));
tx2 = float.Parse(IniFile.GetString("pim", "tx", "43.0"));
f1 = float.Parse(IniFile.GetString("pim", "f1", "935.0"));
f2 = float.Parse(IniFile.GetString("pim", "f2", "960.0"));
_f1s = App_Settings.spfc.ims[0].F1UpS;
_f1e = App_Settings.spfc.ims[0].F1UpE;
_f2s = App_Settings.spfc.ims[0].F2DnS;
_f2e = App_Settings.spfc.ims[0].F2DnE;
_setp1 = App_Settings.spfc.ims[0].F1Step;
_setp2 = App_Settings.spfc.ims[0].F2Step;
enableSquence = 0;
schema = int.Parse(IniFile.GetString("pim", "schema", "0"));
mode = int.Parse(IniFile.GetString("pim", "mode", "0"));
order = int.Parse(IniFile.GetString("pim", "order", "3"));
unit = int.Parse(IniFile.GetString("pim", "unit", "1"));
limit = float.Parse(IniFile.GetString("pim", "limit", "-165.0"));
scanum1 = int.Parse(IniFile.GetString("pim", "scanum1", "20"));
scanum2 = int.Parse(IniFile.GetString("pim", "scanum2", "20"));
scanum3 = int.Parse(IniFile.GetString("pim", "scanum3", "10"));
scanum4 = int.Parse(IniFile.GetString("pim", "scanum4", "1"));
att_spc = int.Parse(IniFile.GetString("pim", "att_spc", "0"));
rbw_spc = int.Parse(IniFile.GetString("pim", "rbw_spc", "4"));
vbw_spc = int.Parse(IniFile.GetString("pim", "vbw_spc", "4"));
scanband = float.Parse(IniFile.GetString("pim", "scanband", "0.05"));
specDelay = int.Parse(IniFile.GetString("pim", "specDelay", "0"));
tsDelay = int.Parse(IniFile.GetString("pim", "tsDelay", "0"));
fsDelay = int.Parse(IniFile.GetString("pim", "fsDelay", "0"));
}
///<summary>
///获取指定的时间扫描数据
///</summary>
internal TimeSweepParam GetTimeSweepParam(Settings_Pim settings,
string filePath,
string gsm,
string mode,
int imOrder,
string cate,
float num)
{
TimeSweepParam tsp = new TimeSweepParam();
IniFile.SetFileName(filePath);
string name = GetName(gsm, mode, imOrder, cate);
tsp.F1 = float.Parse(IniFile.GetString(name, "tx1", "935"));
tsp.F2 = float.Parse(IniFile.GetString(name, "tx2", "960"));
tsp.Rx = float.Parse(IniFile.GetString(name, "rx", "910"));
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//----------------------------------------
tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
tsp.P2 = (float)settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx2, Tx_Tables.pim_rev_offset2);
//if (settings.PimSchema == ImSchema.REV)
//{
// tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
// tsp.P2 = (float)settings.Tx + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx, Tx_Tables.pim_rev_offset2);
//}
//else
//{
// tsp.P1 = (float)settings.Tx + Tx_Tables.pim_frd_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_frd_offset1);
// tsp.P2 = (float)settings.Tx + Tx_Tables.pim_frd_tx2.Offset(tsp.F2, settings.Tx, Tx_Tables.pim_frd_offset2);
//}
//----------------------------------------
}
else
{
tsp.P1 = (float)App_Factors.pim_tx1.ValueWithOffset(tsp.F1, settings.Tx);
tsp.P2 = (float)App_Factors.pim_tx2.ValueWithOffset(tsp.F2, settings.Tx2);
}
tsp.N1 = num;
return(tsp);
}
/// <summary>
/// 加载规格参数
/// </summary>
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
int n = 3;
string pre;
for (int i = 0; i < ims.Length; i++)
{
ims[i] = new ImSpecifics();
pre = "ord" + n.ToString() + "_";
ims[i].F1UpS = float.Parse(IniFile.GetString("Specifics", pre + "F1UpS", "869")); //F1: 869~871.5
ims[i].F1UpE = float.Parse(IniFile.GetString("Specifics", pre + "F1UpE", "871.5"));
ims[i].F2DnS = float.Parse(IniFile.GetString("Specifics", pre + "F2DnS", "889")); //F2: 889~894
ims[i].F2DnE = float.Parse(IniFile.GetString("Specifics", pre + "F2DnE", "894"));
ims[i].F1fixed = float.Parse(IniFile.GetString("Specifics", pre + "F1fixed", "869")); //F1: 869 F2: 894
ims[i].F2fixed = float.Parse(IniFile.GetString("Specifics", pre + "F2fixed", "894"));
ims[i].F1Step = float.Parse(IniFile.GetString("Specifics", pre + "F1Step", "1")); //Step
ims[i].F2Step = float.Parse(IniFile.GetString("Specifics", pre + "F2Step", "1"));
ims[i].ImS = float.Parse(IniFile.GetString("Specifics", pre + "ImS", "844")); //Im3: 844~849
ims[i].ImE = float.Parse(IniFile.GetString("Specifics", pre + "ImE", "849"));
n = n + 2;
}
cbn.Cbn1F1S = float.Parse(IniFile.GetString("Specifics", "Cbn1F1S", "869")); //F1: 869~871.5
cbn.Cbn1F1E = float.Parse(IniFile.GetString("Specifics", "Cbn1F1E", "871.5"));
cbn.Cbn1F2S = float.Parse(IniFile.GetString("Specifics", "Cbn1F2S", "889")); //F2: 889~894
cbn.Cbn1F2E = float.Parse(IniFile.GetString("Specifics", "Cbn1F2E", "894"));
cbn.Cbn1RxS = float.Parse(IniFile.GetString("Specifics", "Cbn1RxS", "824")); //Rx: 824~849
cbn.Cbn1RxE = float.Parse(IniFile.GetString("Specifics", "Cbn1RxE", "849"));
cbn.Cbn2TxS = float.Parse(IniFile.GetString("Specifics", "Cbn2TxS", "869")); //Tx: 869~894
cbn.Cbn2TxE = float.Parse(IniFile.GetString("Specifics", "Cbn2TxE", "894"));
cbn.Cbn2RxS = float.Parse(IniFile.GetString("Specifics", "Cbn2RxS", "824")); //Rx: 824~849
cbn.Cbn2RxE = float.Parse(IniFile.GetString("Specifics", "Cbn2RxE", "849"));
cbn.TxS = float.Parse(IniFile.GetString("Specifics", "TxS", "869")); //Tx: 869~894
cbn.TxE = float.Parse(IniFile.GetString("Specifics", "TxE", "894"));
cbn.RxS = float.Parse(IniFile.GetString("Specifics", "RxS", "824")); //Rx: 824~849
cbn.RxE = float.Parse(IniFile.GetString("Specifics", "RxE", "849"));
}
internal void LoadOffsets()
{
string strTemp;
//设置配置文件，以操作之
IniFile.SetFileName(fileName);
strTemp = IniFile.GetString(sectionName, keyName, "");
factors = strTemp.Trim();
a1 = GetFactors(0);
b1 = GetFactors(1);
c1 = GetFactors(2);
a2 = GetFactors(3);
b2 = GetFactors(4);
c2 = GetFactors(5);
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
tx = float.Parse(IniFile.GetString("harmonic", "tx", "30.0"));
freq = float.Parse(IniFile.GetString("harmonic", "freq", "930.0"));
att_spc = int.Parse(IniFile.GetString("harmonic", "att_spc", "0"));
rbw_spc = int.Parse(IniFile.GetString("harmonic", "rbw_spc", "4"));
vbw_spc = int.Parse(IniFile.GetString("harmonic", "vbw_spc", "4"));
min_har = float.Parse(IniFile.GetString("harmonic", "min_har", "0"));
max_har = float.Parse(IniFile.GetString("harmonic", "max_har", "140"));
time_points = int.Parse(IniFile.GetString("harmonic", "time_points", "20"));
freq_step = float.Parse(IniFile.GetString("harmonic", "freq_step", "1.0"));
limit = float.Parse(IniFile.GetString("harmonic", "limit", "80"));
multiplier = int.Parse(IniFile.GetString("harmonic", "multiplier", "2"));
rev = int.Parse(IniFile.GetString("harmonic", "rev", "0"));
}
private void PimSaveForm_Load(object sender, EventArgs e)
{
IniFile.SetFileName("D:\\settings\\Specifics.ini");
chkCsv.Checked = IniFile.GetString("Specifics", "csvC", "1") == "1"?true:false;
chkPDF.Checked = IniFile.GetString("Specifics", "pdfC", "0") == "1" ? true : false;
chkJpg.Checked = IniFile.GetString("Specifics", "jpgC", "0") == "1" ? true : false;
//chkCsv.Checked = Convert.ToBoolean(App_Configure.Cnfgs.Csv_checked);
//chkPDF.Checked = Convert.ToBoolean(App_Configure.Cnfgs.Pdf_checked);
//chkJpg.Checked = Convert.ToBoolean(App_Configure.Cnfgs.Jpg_checked);
string formate = "yyyy-MM-dd HH-mm-ss";
txtCsv.Text = DateTime.Now.ToString(formate);
txtJpg.Text = DateTime.Now.ToString(formate);
txtPDF.Text = DateTime.Now.ToString(formate);
textBox2.Text = App_Configure.Cnfgs.Modno;
textBox3.Text = App_Configure.Cnfgs.Serno;
textBox1.Text = App_Configure.Cnfgs.Opeor;
SaveDatas();
lblPath.Text = "文件路径:" + App_Configure.Cnfgs.Path_Rpt_Pim;
}
public sock(IntPtr i)
{
Socket sockwatch = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
string path = Application.StartupPath;
this.i = i;
string getip = IniFile.GetString("connServer", "addr", "0", Application.StartupPath + "\\SqlInfo.ini");
if (getip == "0")
{
MessageBox.Show("读取ip错误");
return;
}
IPEndPoint ip = new IPEndPoint(IPAddress.Parse(getip), 6307);
sockwatch.Bind(ip);
sockwatch.Listen(10);
Thread th2 = new Thread(SocketC);
th2.IsBackground = true;
th2.Start(sockwatch);
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
tx = float.Parse(IniFile.GetString("isolation", "tx", "30.0"));
freq = float.Parse(IniFile.GetString("isolation", "freq", "930.0"));
att_spc = int.Parse(IniFile.GetString("isolation", "att_spc", "0"));
rbw_spc = int.Parse(IniFile.GetString("isolation", "rbw_spc", "4"));
vbw_spc = int.Parse(IniFile.GetString("isolation", "vbw_spc", "4"));
time_points = int.Parse(IniFile.GetString("isolation", "time_points", "20"));
freq_step = float.Parse(IniFile.GetString("isolation", "freq_step", "1.0"));
min_iso = float.Parse(IniFile.GetString("isolation", "min_iso", "0"));
max_iso = float.Parse(IniFile.GetString("isolation", "max_iso", "140"));
limit = float.Parse(IniFile.GetString("isolation", "limit", "80"));
attenuator = float.Parse(IniFile.GetString("isolation", "attenuator", "0"));
offset = float.Parse(IniFile.GetString("isolation", "offset", "0"));
}
private void FillTable(int N, int M)
{
int i, j;
float v = 0.0f;
string s = "";
string s2 = "";
string r = "tx_row_";
//初始化2维表格
table = new float[N][];
for (i = 0; i < table.Length; i++)
{
table[i] = new float[M];
s = IniFile.GetString(sectionName, (r + (i + 1).ToString()), "");
for (j = 0; j < M; j++)
{
s2 = IniFile.GetItemFrom(s, j, M);
try
{
if (s2 != "")
{
v = Convert.ToSingle(s2);
}
}
catch (InvalidCastException)
{
v = 0.0f;
}
table[i][j] = v;
}
}
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
tx = float.Parse(IniFile.GetString("vswr", "tx", "30.0"));
freq = float.Parse(IniFile.GetString("vswr", "freq", "935.0"));
freq_step = float.Parse(IniFile.GetString("vswr", "freq_step", "0.5"));
count = int.Parse(IniFile.GetString("vswr", "count", "20"));
att_spc = int.Parse(IniFile.GetString("vswr", "att_spc", "0"));
rbw_spc = int.Parse(IniFile.GetString("vswr", "rbw_spc", "4"));
vbw_spc = int.Parse(IniFile.GetString("vswr", "vbw_spc", "4"));
min_vsw = float.Parse(IniFile.GetString("vswr", "min_vsw", "0"));
max_vsw = float.Parse(IniFile.GetString("vswr", "max_vsw", "10"));
min_rls = float.Parse(IniFile.GetString("vswr", "min_rls", "0"));
max_rls = float.Parse(IniFile.GetString("vswr", "max_rls", "100"));
limit = float.Parse(IniFile.GetString("vswr", "limit", "1.3"));
attenuator = float.Parse(IniFile.GetString("vswr", "attenuator", "0"));
offset = float.Parse(IniFile.GetString("vswr", "offset", "0"));
}
/// <summary>
/// 获取指定的序列频率扫描数据
/// </summary>
/// <param name="filePath">读取的文件地址</param>
/// <param name="gsm"></param>
/// <param name="mode">REV，FWD</param>
/// <param name="imOder">阶数</param>
/// <param name="cate">fixed,sweep</param>
internal FreqSweepParam GetFreqSweepParam(Settings_Pim settings,
string filePath,
string gsm,
string mode,
string cate,
int imOrder)
{
IniFile.SetFileName(filePath);
string name = GetName(gsm, mode, imOrder, cate);
FreqSweepParam fsp = new FreqSweepParam();
FreqSweepItem[] sweepItem1 = null;
FreqSweepItem[] sweepItem2 = null;
string tx1_1 = IniFile.GetString(name, "tx1_1", "935");
string tx2_1 = IniFile.GetString(name, "tx2_1", "960");
string rx_1 = IniFile.GetString(name, "rx_1", "910");
string tx1_2 = IniFile.GetString(name, "tx1_2", "935");
string tx2_2 = IniFile.GetString(name, "tx2_2", "960");
string rx_2 = IniFile.GetString(name, "rx_2", "910");
string[] strTx1_1 = tx1_1.Split(char.Parse(","));
string[] strTx2_1 = tx2_1.Split(char.Parse(","));
string[] strRx_1 = rx_1.Split(char.Parse(","));
string[] strTx1_2 = tx1_2.Split(char.Parse(","));
string[] strTx2_2 = tx2_2.Split(char.Parse(","));
string[] strRx_2 = rx_2.Split(char.Parse(","));
sweepItem1 = new FreqSweepItem[strTx1_1.Length];
sweepItem2 = new FreqSweepItem[strTx1_2.Length];
for (int i = 0; i < strTx1_1.Length; i++)
{
sweepItem1[i] = new FreqSweepItem();
sweepItem1[i].Tx1 = float.Parse(strTx1_1[i]);
sweepItem1[i].Tx2 = float.Parse(strTx2_1[i]);
sweepItem1[i].Rx = float.Parse(strRx_1[i]);
sweepItem2[i] = new FreqSweepItem();
sweepItem2[i].Tx1 = float.Parse(strTx1_2[i]);
sweepItem2[i].Tx2 = float.Parse(strTx2_2[i]);
sweepItem2[i].Rx = float.Parse(strRx_2[i]);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//----------------------------------------
sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem1[i].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[i].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem2[i].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[i].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
//if (settings.PimSchema == ImSchema.REV)
//{
// sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem1[i].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[i].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
// sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem2[i].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[i].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
//}
//else
//{
// sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem1[i].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem1[i].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
// sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem2[i].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem2[i].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
//}
//----------------------------------------
}
else
{
sweepItem1[i].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem1[i].Tx1, settings.Tx);
sweepItem1[i].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem1[i].Tx2, settings.Tx2);
sweepItem2[i].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem2[i].Tx1, settings.Tx);
sweepItem2[i].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem2[i].Tx2, settings.Tx2);
}
}
fsp.Items1 = sweepItem1;
fsp.Items2 = sweepItem2;
return(fsp);
}
internal void LoadSettings()
{
IniFile.SetFileName(fileName);
//=======ygq
ms_switch_port_count = int.Parse(IniFile.GetString("cnfgs", "ms_switch_port_count", "0"));
comaddr_switch = int.Parse(IniFile.GetString("cnfgs", "comaddr_switch", "1"));
rxRef = float.Parse(IniFile.GetString("cnfgs", "rxRef", "0"));
txRef = float.Parse(IniFile.GetString("cnfgs", "txRef", "0"));
openOffset = int.Parse(IniFile.GetString("cnfgs", "openOffset", "1"));
qiandanqian_mode = int.Parse(IniFile.GetString("cnfgs", "qiandanqiang_mode", "0"));
mode = int.Parse(IniFile.GetString("cnfgs", "mode", "0"));
ishigh = int.Parse(IniFile.GetString("cnfgs", "ishigh", "0"));
//======ygq
macdesc = IniFile.GetString("cnfgs", "macdesc", "JCIMA-II-900P");
macid = int.Parse(IniFile.GetString("cnfgs", "macid", "1"));
sn = IniFile.GetString("cnfgs", "sn", "none sn");
cal = IniFile.GetString("cnfgs", "cal", "none cal");
comaddr1 = int.Parse(IniFile.GetString("cnfgs", "comaddr1", "1"));
comaddr2 = int.Parse(IniFile.GetString("cnfgs", "comaddr2", "2"));
rfclass = int.Parse(IniFile.GetString("cnfgs", "rfclass", "0"));
rfformula = int.Parse(IniFile.GetString("cnfgs", "rfformula", "0"));
spectrum = int.Parse(IniFile.GetString("cnfgs", "spectrum", "0"));
max_vswr = float.Parse(IniFile.GetString("cnfgs", "max_vswr", "2.0"));
min_temp = float.Parse(IniFile.GetString("cnfgs", "min_temp", "-20.0"));
max_temp = float.Parse(IniFile.GetString("cnfgs", "max_temp", "60.0"));
min_curr = float.Parse(IniFile.GetString("cnfgs", "min_curr", "0.1"));
max_curr = float.Parse(IniFile.GetString("cnfgs", "max_curr", "3.0"));
path_def = IniFile.GetString("cnfgs", "path_def", "settings");
//file_def_pim = IniFile.GetString("cnfgs", "file_def_pim", "Settings_Pim.ini");
//file_def_spc = IniFile.GetString("cnfgs", "file_def_spc", "Settings_Spc.ini");
//file_def_iso = IniFile.GetString("cnfgs", "file_def_iso", "Settings_Iso.ini");
//file_def_vsw = IniFile.GetString("cnfgs", "file_def_vsw", "Settings_Vsw.ini");
//file_def_har = IniFile.GetString("cnfgs", "file_def_har", "Settings_Har.ini");
path_usr = IniFile.GetString("cnfgs", "path_usr", "d:\\usr_settings");
path_usr_pim = IniFile.GetString("cnfgs", "path_usr_pim", "d:\\usr_settings\\pim");
path_usr_spc = IniFile.GetString("cnfgs", "path_usr_spc", "d:\\usr_settings\\spc");
path_usr_iso = IniFile.GetString("cnfgs", "path_usr_iso", "d:\\usr_settings\\iso");
path_usr_vsw = IniFile.GetString("cnfgs", "path_usr_vsw", "d:\\usr_settings\\vsw");
path_usr_har = IniFile.GetString("cnfgs", "path_usr_har", "d:\\usr_settings\\har");
//file_usr_pim = IniFile.GetString("cnfgs", "file_usr_pim", "Settings_Pim.ini");
//file_usr_spc = IniFile.GetString("cnfgs", "file_usr_spc", "Settings_Spc.ini");
//file_usr_iso = IniFile.GetString("cnfgs", "file_usr_iso", "Settings_Iso.ini");
//file_usr_vsw = IniFile.GetString("cnfgs", "file_usr_vsw", "Settings_Vsw.ini");
//file_usr_har = IniFile.GetString("cnfgs", "file_usr_har", "Settings_Har.ini");
path_rpt = IniFile.GetString("cnfgs", "path_rpt", "d:\\report");
path_rpt_pim = IniFile.GetString("cnfgs", "path_rpt_pim", "d:\\report\\pim");
path_rpt_spc = IniFile.GetString("cnfgs", "path_rpt_spc", "d:\\report\\spc");
path_rpt_iso = IniFile.GetString("cnfgs", "path_rpt_iso", "d:\\report\\iso");
path_rpt_vsw = IniFile.GetString("cnfgs", "path_rpt_vsw", "d:\\report\\vsw");
path_rpt_har = IniFile.GetString("cnfgs", "path_rpt_har", "d:\\report\\har");
cal_use_table = int.Parse(IniFile.GetString("cnfgs", "cal_use_table", "0"));
lang_pack_path = IniFile.GetString("cnfgs", "lang_pack_path", "");
skin_pack_path = IniFile.GetString("cnfgs", "skin_pack_path", "");
//enable_pim = int.Parse(IniFile.GetString("cnfgs", "enable_pim", "1"));
//enable_spc = int.Parse(IniFile.GetString("cnfgs", "enable_spc", "1"));
//enable_iso = int.Parse(IniFile.GetString("cnfgs", "enable_iso", "0"));
//enable_vsw = int.Parse(IniFile.GetString("cnfgs", "enable_vsw", "0"));
//enable_har = int.Parse(IniFile.GetString("cnfgs", "enable_har", "0"));
//enable_tst = int.Parse(IniFile.GetString("cnfgs", "enable_tst", "0"));
_desc = IniFile.GetString("cnfgs", "desc", "here is no [description]");
_modno = IniFile.GetString("cnfgs", "modno", "here is no [model no.]");
_opeor = IniFile.GetString("cnfgs", "opeor", "here is no [serial no.]");
_serno = IniFile.GetString("cnfgs", "serno", "default user");
csv_checked = int.Parse(IniFile.GetString("cnfgs", "csv_checked", "0"));
jpg_checked = int.Parse(IniFile.GetString("cnfgs", "jpg_checked", "0"));
pdf_checked = int.Parse(IniFile.GetString("cnfgs", "pdf_checked", "0"));
_channel = int.Parse(IniFile.GetString("cnfgs", "channel", "0"));
_gpio = int.Parse(IniFile.GetString("cnfgs", "gpio", "0"));
_battery = int.Parse(IniFile.GetString("cnfgs", "battery", "0"));
_width_pinNum = int.Parse(IniFile.GetString("cnfgs", "width_pinNum", "0"));
_power_pinNum = int.Parse(IniFile.GetString("cnfgs", "power_pinNum", "1"));
_enableSuperConfig = int.Parse(IniFile.GetString("cnfgs", "enableSuperConfig", "0"));
isScroll = IniFile.GetString("cnfgs", "scroll", "1") == "0" ? true : false;
switchOrGpio = IniFile.GetString("cnfgs", "SwitchOrGpio", "0") == "0" ? true : false;
//_pim_wait = int.Parse(IniFile.GetString("cnfgs", "pimWait", "1000"));
_password = IniFile.GetString("cnfgs", "password", "82F8A4F03E18723F");
_switchMode = int.Parse(IniFile.GetString("cnfgs", "switchMode", "0"));
_switchO = IniFile.GetString("cnfgs", "switchO", "0");
_switchN = IniFile.GetString("cnfgs", "switchN", "0");
if (_password == "")
{
_password = "******";
}
}
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
bool running = false;
Mutex mt = new Mutex(true, "jcPimSoftware", out running);
//获取程序执行路径
string exePath = Application.StartupPath;
//加载全局配置文件
App_Configure.NewConfigure(exePath + "\\Configures.ini");
App_Configure.Cnfgs.LoadSettings();
//判断授权文件
Code c = new Code();
try
{
if (File.Exists(Code.strFilePath))
{
if (!c.CheckFile(App_Configure.Cnfgs.SN.ToLower()))
{
running = false;
MessageBox.Show("授权日期已到！");
}
}
else
{
running = false;
MessageBox.Show("请先生成授权文件！");
}
}
catch
{
running = false;
MessageBox.Show("授权文件缺失或错误，请重新生成授权文件！");
}
if (running)
{
sf = new StartForm("Initializing......\r\n");
Thread t = new Thread(new ThreadStart(Show));
t.IsBackground = true;
t.Start();
try
{
//ygq
string s = Copy(Application.StartupPath + "\\settings", "D:\\settings");
//
#region 加载主配置文件，获取配置文件相对路径
//获取程序执行路径
//string exePath = Application.StartupPath;
//加载全局配置文件
//App_Configure.NewConfigure(exePath + "\\Configures.ini");
//App_Configure.Cnfgs.LoadSettings();
//获取配置文件夹路径
string setPath = App_Configure.Cnfgs.Path_Def;
#endregion
#region 建立功放补偿表格文件对象，并加载数据
//TX补偿文件
if (App_Configure.Cnfgs.Ms_switch_port_count <= 0)
{
//Tx_Tables.NewTables(exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_rev.ini",
// exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_disp_rev.ini"
// );
if (App_Configure.Cnfgs.Mode >= 2)
{
Tx_Tables.NewTables(exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_rev.ini",
exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_disp_rev.ini",
exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_rev2.ini",
exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_disp_rev2.ini"
);
Tx_Tables.LoadTables();
//RX补偿文件
string path1 = exePath + "\\" + setPath + "\\RX_Tables";
//string[] rx_tables_names = { path1 + "\\pim_rev.txt", path1 + "\\pim_frd.txt" };
string[] rx_tables_names = { path1 + "\\pim_rev.txt", path1 + "\\pim_frd.txt",
path1 + "\\pim_rev2.txt", path1 + "\\pim_frd2.txt" };
Rx_Tables.NewTables(rx_tables_names);
Rx_Tables.LoadTables();
}
else
{
Tx_Tables.NewTables(exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_rev.ini",
exePath + "\\" + setPath + "\\Tx_Tables\\signal_tx_disp_rev.ini"
);
Tx_Tables.LoadTables2();
//RX补偿文件
string path1 = exePath + "\\" + setPath + "\\RX_Tables";
string[] rx_tables_names = { path1 + "\\pim_rev.txt", path1 + "\\pim_frd.txt" };
Rx_Tables.NewTables(rx_tables_names);
Rx_Tables.LoadTables();
}
}
else
{
bool com_client = MsSwithc.ClientCom();
//mSwitch = new MotorSwitch();
//bool com_client = mSwitch.Connect("192.168.1.178", 4001);
if (com_client)
{
sf.GetInfoMation("Load switch successfully!");
}
else
{
sf.GetInfoMation("Load switch failed!");
}
offset = new Offset(App_Configure.Cnfgs.Ms_switch_port_count);
int a = int.Parse(IniFile.GetString("cnfgs", "xuhao", "0", exePath + "\\Configures.ini"));
offset.LoadingRX();
offset.LoadingTX();
offset.GetTX(a);
offset.GetRX(a);
}
//建立补偿系数文件对象，并加载文件
App_Factors.NewFactors(exePath + "\\" + setPath + "\\Offsets_Tx.ini",
exePath + "\\" + setPath + "\\Offsets_Tx_Disp.ini",
exePath + "\\" + setPath + "\\Offsets_Rx.ini");
App_Factors.LoadFactros();
#endregion
#region 建立频谱补偿表格文件对象，并加载数据
//频谱补偿文件
string path2 = exePath + "\\" + setPath + "\\Spectrum_Tables";
string[] spc_tables_names = { path2 + "\\Ch1_4KHz.txt", path2 + "\\Ch1_20KHz.txt", path2 + "\\Ch1_100KHz.txt", path2 + "\\Ch1_1000KHz.txt",
path2 + "\\Ch2_4KHz.txt", path2 + "\\Ch2_20KHz.txt", path2 + "\\Ch2_100KHz.txt", path2 + "\\Ch2_1000KHz.txt" };
Spectrum_Tables.NewTables(spc_tables_names);
#endregion ;
#region 建立RLO校准文件对象，并加载数据
//string path4 = exePath + "\\" + setPath + "\\RL0_Tables";
//string[] rl0_tables_names = {path4 + "\\iso_tx1.txt", path4 + "\\iso_tx2.txt",
// path4 + "\\vsw_tx1.txt", path4 + "\\vsw_tx2.txt",
// path4 + "\\har_tx1.txt", path4 + "\\har_tx2.txt"};
//RL0_Tables.NewTables(rl0_tables_names);
//RL0_Tables.LoadTables();
#endregion
#region 建立默认模块配置信息对象，并加载数据
//默认模块配置文件
string path3 = "D:\\" + setPath;
string[] settings_names = { path3 + "\\Settings_Sgn.ini", path3 + "\\Settings_Pim.ini",
path3 + "\\Settings_Spc.ini",
path3 + "\\Specifics.ini" };
App_Settings.NewSettings(settings_names);
App_Settings.LoadSettings();
#endregion
#region 加载皮肤资源
FileInfo f = new FileInfo(exePath + "\\" + App_Configure.Cnfgs.Skin_pack_path);
string name = f.Name.Substring(0, f.Name.LastIndexOf("."));
ImagesManage.LoadImageDLL(name);
#endregion
#region 加载语言包资源
#endregion
//建立报告文件夹结构
App_Configure.CreateReportFolder();
//建立用户配置文件夹结构
App_Configure.CreateUsrSettingFolder();
sf.GetInfoMation("Load default configuration successfully!");
}
catch
{
sf.GetInfoMation("Load default configuration failed!");
}
NativeMessage.PostMessage(handel, MessageID.SF_WAIT, 0, 0);
#region 建立程序主窗体
frmMain = new MainForm();
NativeMessage.PostMessage(handel, MessageID.SF_CONTINUTE, 0, 0);
#endregion
#region 建立射频功放层
RFSignal.InitRFSignal(frmMain.Handle);
bool flag = false;
int adrr1 = App_Configure.Cnfgs.ComAddr1;
int adrr2 = App_Configure.Cnfgs.ComAddr2;
int rfClass = App_Configure.Cnfgs.RFClass;
int rFFormula = App_Configure.Cnfgs.RFFormula;
flag = RFSignal.NewRFSignal(adrr1, rfClass, rFFormula);
if (flag)
{
sf.GetInfoMation("Serial " + adrr1.ToString() + " initialized successfully!");
sf.status = sf.status & 1;
}
else
{
sf.GetInfoMation("Serial " + adrr1.ToString() + " initialized failed!");
sf.status = sf.status & 0;
}
flag = RFSignal.NewRFSignal(adrr2, rfClass, rFFormula);
if (flag)
{
sf.GetInfoMation("Serial " + adrr2.ToString() + " initialized successfully!");
sf.status = sf.status & 1;
}
else
{
sf.GetInfoMation("Serial " + adrr2.ToString() + " initialized failed!");
sf.status = sf.status & 0;
}
RFSignal.RFOff(adrr1, 2);
RFSignal.RFOff(adrr2, 2);
#endregion
NativeMessage.PostMessage(handel, MessageID.SF_WAIT, 0, 0);
#region WINIO、GPIO初始化操作
flag = GPIO.InitWinIo();
if (!flag)
{
Thread.Sleep(300);
flag = GPIO.InitWinIo();
}
if (flag)
{
sf.GetInfoMation("WINIO initialized successfully!");
sf.status = sf.status & 1;
}
else
{
// Log.WriteLog("winIO初始化失败！", Log.EFunctionType.TestMode);
sf.GetInfoMation("WINIO initialized failed!");
sf.status = sf.status & 0;
}
sf.Complete = true;
//GPIO.Narrowband();
NativeMessage.PostMessage(handel, MessageID.SF_CONTINUTE, 0, 0);
#endregion
#region 判断Bird频谱仪状态
if (App_Configure.Cnfgs.Spectrum == 1)
{
FunTimeout tf = new FunTimeout();
SpectrumLib.ISpectrum ISpectrumObj = new SpectrumLib.Spectrums.BirdSh(handel, MessageID.SPECTRUEME_SUCCED, MessageID.SPECTRUM_ERROR);
SpectrumLib.Models.ScanModel model = new SpectrumLib.Models.ScanModel();
sf.ISpectrumObj = ISpectrumObj;
if (ISpectrumObj.ConnectSpectrum() != 1)
{
GPIO.SetHigh();
Thread.Sleep(1000);
GPIO.SetLow();
ISpectrumObj.ResetStatus();
sf.GetInfoMation("Bird connect failed!");
Log.WriteLog("Bird connect failed!", Log.EFunctionType.SPECTRUM);
}
model.StartFreq = 900;
model.EndFreq = 900.5;
model.Att = 0;
model.Rbw = 10 * 1000;
model.Vbw = 3 * 1000;
model.Continued = false;
model.Unit = SpectrumLib.Defines.CommonDef.EFreqUnit.MHz;
tf.obj = model;
tf.Do = ISpectrumObj.StartAnalysis;
if (tf.DoWithTimeout(new TimeSpan(0, 0, 0, 1)))
{
GPIO.SetHigh();
Thread.Sleep(1000);
GPIO.SetLow();
ISpectrumObj.ResetStatus();
Log.WriteLog("Bird get data failed!", Log.EFunctionType.SPECTRUM);
}
}
#endregion
#region 判断Deli频谱仪状态
if (App_Configure.Cnfgs.Spectrum == 2)
{
try
{
SpectrumLib.ISpectrum ISpectrumObj = new SpectrumLib.Spectrums.Deli(handel, MessageID.SPECTRUEME_SUCCED, MessageID.SPECTRUM_ERROR);
SpectrumLib.Models.ScanModel model = new SpectrumLib.Models.ScanModel();
sf.ISpectrumObj = ISpectrumObj;
if (ISpectrumObj.ConnectSpectrum() != 1)
{
ISpectrumObj.ResetStatus();
sf.GetInfoMation("Deli spectrum connect failed !");
Log.WriteLog("Deli spectrum connect failed!", Log.EFunctionType.SPECTRUM);
}
else
{
object o;
model.StartFreq = App_Settings.pim.F1;
model.EndFreq = model.StartFreq + 2 * App_Settings.pim.Scanband;
model.Unit = SpectrumLib.Defines.CommonDef.EFreqUnit.MHz;
model.Att = App_Settings.pim.Att_Spc;
model.Rbw = App_Settings.pim.Rbw_Spc;
model.Vbw = App_Settings.pim.Vbw_Spc;
model.Deli_averagecount = 6;
model.Deli_detector = "AVERage";//检波方式
model.Deli_ref = -50;
model.Deli_refoffset = 0;
model.Deli_specing = "LOGarithmic";
model.Deli_sweepmode = "PERFormance"; //扫描模式
model.Deli_source = "FREERUN"; //触发方式
model.Deli_scale = 10; //单位/格
model.Deli_startspe = 0; //频谱仪是否第一次启动
model.Deli_isSpectrum = true; //频谱模式
o = model;
if (!ISpectrumObj.Setting(o))
{
Thread.Sleep(1000);
ISpectrumObj.ResetStatus();
sf.GetInfoMation("Deli spectrum set failed !");
Log.WriteLog("Deli spectrum set failed!", Log.EFunctionType.SPECTRUM);
}
}
}
catch
{
sf.GetInfoMation("Deli spectrum connect failed !");
Log.WriteLog("Deli connect failed!", Log.EFunctionType.SPECTRUM);
}
}
#endregion
#region 判断FanShuang收信机状态
if (App_Configure.Cnfgs.Spectrum == SpectrumType.FanShuang)
{
FunTimeout tf = new FunTimeout();
SpectrumLib.ISpectrum ISpectrumObj = new SpectrumLib.Spectrums.FanShuang(handel, MessageID.SPECTRUEME_SUCCED, MessageID.SPECTRUM_ERROR);
SpectrumLib.Models.ScanModel model = new SpectrumLib.Models.ScanModel();
sf.ISpectrumObj = ISpectrumObj;
if (ISpectrumObj.ConnectSpectrum() != 1)
{
GPIO.SetHigh();
Thread.Sleep(1000);
GPIO.SetLow();
ISpectrumObj.ResetStatus();
sf.GetInfoMation("FanShaung connect failed!");
Log.WriteLog("FanShaung connect failed!", Log.EFunctionType.SPECTRUM);
}
}
#endregion
mre.WaitOne();
#region 启动程序
Application.Run(frmMain);
mt.ReleaseMutex();
}
else
{
Application.Exit();
}
#endregion
#region 释放资源
RFSignal.FinaRFSignal();
#endregion
}