private void MatchHu(Hu hu)
{
base.CheckHu(hu);
if (!base.isCancel)
{
#region 条码匹配
//支持发货扫描条码选项为false时，扫描条码仍起到数据收集作用
//if (hu.Status != HuStatus.Location)
//{
// throw new BusinessException("条码不在库位中");
//}
if (orderMasters.Any(o => o.IsShipScanHu))
{
if (hu.Status != HuStatus.Location)
{
throw new BusinessException("条码不在库位中");
}
}
var orderDetails = new List<OrderDetail>();
var orderMaster = this.orderMasters.First();
//string huId = hu.HuId;
string huId = orderMasters.Any(o => o.IsShipScanHu) ? hu.HuId : null;
//先按开始日期排序，在按订单序号排序
foreach (var om in orderMasters.OrderBy(o => o.StartTime))
{
orderDetails.AddRange(om.OrderDetails.Where(o => o.OrderedQty > o.ShippedQty).OrderBy(o => o.Sequence));
}
var matchedOrderDetailList = orderDetails.Where(o => o.Item == hu.Item);
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的零件号{1}匹配的订单明细。", huId, hu.Item);
}
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.Uom.Equals(hu.Uom, StringComparison.OrdinalIgnoreCase));
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的单位{1}匹配的订单明细。", huId, hu.Uom);
}
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.LocationFrom.Equals(hu.Location, StringComparison.OrdinalIgnoreCase));
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的库位{1}匹配的订单明细。", huId, hu.Location);
}
if (orderMaster.IsShipFulfillUC)
{
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.UnitCount == hu.UnitCount);
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的包装数{1}匹配的订单明细。", huId, hu.UnitCount.ToString());
}
}
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.QualityType == hu.QualityType);
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的质量状态匹配的订单明细。", huId);
}
#region 先匹配未满足订单发货数的（未超发的）
OrderDetail matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => o.CurrentQty >= hu.Qty).ToList());
#endregion
//#region 再匹配允许超发的订单，未发满但是+本次发货超发了
//if (matchedOrderDetail == null)
//{
// IList<string> orderNoList = orderMasters.Where(o => o.IsShipExceed).Select(o => o.OrderNo).ToList();
// matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => (o.CurrentQty > 0)
// && (o.CurrentQty < hu.Qty) && orderNoList.Contains(o.OrderNo)).ToList());
// #region 再匹配允许超发的订单，已经满了或已经超发了
// if (matchedOrderDetail == null)
// {
// matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => (o.CurrentQty <= 0) && orderNoList.Contains(o.OrderNo)).ToList());
// }
// #endregion
//}
#endregion
#region 未找到匹配的订单，报错信息
if (matchedOrderDetail == null)
{
if (string.IsNullOrEmpty(hu.ManufactureParty))
{
//条码未指定制造商
if (matchedOrderDetailList.Where(o => string.IsNullOrEmpty(o.ManufactureParty)).Count() > 0)
{
//有未指定制造商的订货明细
throw new BusinessException("和条码{0}匹配的订单明细的发货数已经全部满足。", huId, hu.Item);
}
else
{
//没有未指定制造商的订货明细
throw new BusinessException("待发货订单明细指定了制造商，而条码{0}没有指定制造商", huId);
}
}
else
{
//条码指定了制造商
if (matchedOrderDetailList.Where(o => o.ManufactureParty == hu.ManufactureParty).Count() > 0)
{
//有未指定制造商的订货明细
throw new BusinessException("和条码{0}匹配的订单明细的发货数已经全部满足。", huId);
}
else
{
//没有未指定制造商的订货明细
throw new BusinessException("待发货订单明细指定的制造商和条码{0}制造商{1}不匹配", huId, hu.ManufactureParty);
}
}
}
#endregion
OrderDetailInput orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = hu.HuId;
orderDetailInput.ShipQty = hu.Qty;
orderDetailInput.LotNo = hu.LotNo;
orderDetailInput.Id = matchedOrderDetail.Id;
List<OrderDetailInput> orderDetailInputs = new List<OrderDetailInput>();
if (matchedOrderDetail.OrderDetailInputs != null)
{
orderDetailInputs = matchedOrderDetail.OrderDetailInputs.ToList();
}
orderDetailInputs.Add(orderDetailInput);
matchedOrderDetail.OrderDetailInputs = orderDetailInputs.ToArray();
matchedOrderDetail.CurrentQty -= hu.Qty;
matchedOrderDetail.Carton++;
base.hus.Insert(0, hu);
}
else
{
#region 取消
this.CancelHu(hu);
#endregion
}
this.gvListDataBind();
}
/// <remarks/>
public System.IAsyncResult BeginDoTransfer(FlowMaster flowMaster, OrderDetailInput[] orderDetailInputList, string userCode, System.AsyncCallback callback, object asyncState) {
return this.BeginInvoke("DoTransfer", new object[] {
flowMaster,
orderDetailInputList,
userCode}, callback, asyncState);
}
private void MatchOrderMaster(Hu hu)
{
//if (this.orderMasters[0].OrderStrategy == FlowStrategy.KIT && this.orderMasters[0].Status == OrderStatus.InProcess)
//{
// throw new BusinessException("此KIT单无需扫描条码");
//}
base.CheckHu(hu);
if (!base.isCancel)
{
if (this.orderMasters[0].Type == OrderType.Procurement)
{
if (hu.Status == HuStatus.Location)
{
throw new BusinessException("条码已经在库位{0}中", hu.Location);
}
if (hu.Status == HuStatus.Ip)
{
throw new BusinessException("条码已经在途{0}");
}
}
else if (this.orderMasters[0].Type == OrderType.Transfer)
{
if (hu.Status != HuStatus.Location)
{
throw new BusinessException("条码不在库位中");
}
}
#region 条码匹配
var orderDetails = new List<OrderDetail>();
var orderMaster = this.orderMasters.First();
string huId = hu.HuId;
//先按开始日期排序，在按订单序号排序
foreach (var om in orderMasters.OrderBy(o => o.StartTime))
{
orderDetails.AddRange(om.OrderDetails.OrderBy(o => o.Sequence));
}
var matchedOrderDetailList = orderDetails.Where(o => o.Item == hu.Item);
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的零件号{1}匹配的订单明细。", huId, hu.Item);
}
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.Uom.Equals(hu.Uom, StringComparison.OrdinalIgnoreCase));
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的单位{1}匹配的订单明细。", huId, hu.Uom);
}
//强制收货不考虑包装
//if (orderMaster.IsOrderFulfillUC)
//{
// matchedOrderDetailList = matchedOrderDetailList.Where(o => o.UnitCount == hu.UnitCount);
// if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
// {
// throw new BusinessException("没有找到和条码{0}的包装数{1}匹配的订单明细。", huId, hu.UnitCount.ToString());
// }
//}
matchedOrderDetailList = matchedOrderDetailList.Where(o => o.QualityType == hu.QualityType);
if (matchedOrderDetailList == null || matchedOrderDetailList.Count() == 0)
{
throw new BusinessException("没有找到和条码{0}的质量状态匹配的订单明细。", huId);
}
#region 先匹配未满足订单发货数的（未超收的）
OrderDetail matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => o.CurrentQty >= hu.Qty).ToList());
#endregion
#region 再匹配允许超收的订单，未发满但是+本次发货超收了 todo
//if (matchedOrderDetail == null)
//{
// IList<string> orderNoList = orderMasters.Where(o => o.IsReceiveExceed).Select(o => o.OrderNo).ToList();
// matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => (o.CurrentQty > 0)
// && (o.CurrentQty < hu.Qty) && orderNoList.Contains(o.OrderNo)).ToList());
// #region 再匹配允许超发的订单，已经满了或已经超发了
// if (matchedOrderDetail == null)
// {
// matchedOrderDetail = MatchOrderDetail(hu, matchedOrderDetailList.Where(o => (o.CurrentQty <= 0) && orderNoList.Contains(o.OrderNo)).ToList());
// }
// #endregion
//}
#endregion
#region 未找到匹配的订单，报错信息
if (matchedOrderDetail == null)
{
if (string.IsNullOrEmpty(hu.ManufactureParty))
{
//条码未指定制造商
if (matchedOrderDetailList.Where(o => string.IsNullOrEmpty(o.ManufactureParty)).Count() > 0)
{
//有未指定制造商的订货明细
throw new BusinessException("和条码{0}匹配的订单明细的发货数已经全部满足。", huId, hu.Item);
}
else
{
//没有未指定制造商的订货明细
throw new BusinessException("待发货订单明细指定了制造商，而条码{0}没有指定制造商", huId);
}
}
else
{
//条码指定了制造商
if (matchedOrderDetailList.Where(o => o.ManufactureParty == hu.ManufactureParty).Count() > 0)
{
//有未指定制造商的订货明细
throw new BusinessException("和条码{0}匹配的订单明细的发货数已经全部满足。", huId);
}
else
{
//没有未指定制造商的订货明细
throw new BusinessException("待发货订单明细指定的制造商和条码{0}制造商{1}不匹配", huId, hu.ManufactureParty);
}
}
}
#endregion
OrderDetailInput input = new OrderDetailInput();
input.HuId = hu.HuId;
input.ReceiveQty = hu.Qty;
input.LotNo = hu.LotNo;
input.Id = matchedOrderDetail.Id;
List<OrderDetailInput> orderDetailInputs = new List<OrderDetailInput>();
if (matchedOrderDetail.OrderDetailInputs != null)
{
orderDetailInputs = matchedOrderDetail.OrderDetailInputs.ToList();
}
orderDetailInputs.Add(input);
matchedOrderDetail.OrderDetailInputs = orderDetailInputs.ToArray();
matchedOrderDetail.CurrentQty -= hu.Qty;
matchedOrderDetail.Carton++;
base.hus.Insert(0, hu);
#endregion
}
else
{
this.CancelHu(hu);
}
this.gvListDataBind();
}
/// <remarks/>
public System.IAsyncResult BeginDoReceiveOrder(OrderDetailInput[] orderDetailInputList, System.Nullable<System.DateTime> effDate, string userCode, System.AsyncCallback callback, object asyncState) {
return this.BeginInvoke("DoReceiveOrder", new object[] {
orderDetailInputList,
effDate,
userCode}, callback, asyncState);
}
public void DoTransfer(FlowMaster flowMaster, OrderDetailInput[] orderDetailInputList, string userCode) {
this.Invoke("DoTransfer", new object[] {
flowMaster,
orderDetailInputList,
userCode});
}
public void DoReceiveOrder(OrderDetailInput[] orderDetailInputList, [System.Xml.Serialization.XmlElementAttribute(IsNullable=true)] System.Nullable<System.DateTime> effDate, string userCode) {
this.Invoke("DoReceiveOrder", new object[] {
orderDetailInputList,
effDate,
userCode});
}
protected override void DoSubmit()
{
try
{
if (this.flowMaster == null)
{
throw new BusinessException("请先扫描路线，库位或者库格。");
}
List<OrderDetailInput> orderDetailInputList = new List<OrderDetailInput>();
if (this.flowMaster.FlowDetails != null)
{
foreach (var flowDetail in this.flowMaster.FlowDetails)
{
if (flowDetail.FlowDetailInputs != null)
{
foreach (var fdi in flowDetail.FlowDetailInputs)
{
OrderDetailInput orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = fdi.HuId;
orderDetailInput.Qty = fdi.Qty;
orderDetailInput.LotNo = fdi.LotNo;
orderDetailInput.Id = flowDetail.Id;
orderDetailInputList.Add(orderDetailInput);
}
}
}
}
this.smartDeviceService.DoTransfer(flowMaster, orderDetailInputList.ToArray(), base.user.Code);
this.Reset();
base.lblMessage.Text = "移库成功";
}
catch (Exception ex)
{
this.isMark = true;
this.tbBarCode.Text = string.Empty;
//this.tbBarCode.Focus();
Utility.ShowMessageBox(ex.Message);
}
}
private void MatchHu(Hu hu)
{
base.CheckHu(hu);
if (!base.isCancel)
{
#region 条码匹配
//if (hu.Status != HuStatus.Location)
//{
// if (this.location == null)
// {
// throw new BusinessException("请先扫描库位条码。");
// }
//}
var orderDetails = new List<OrderDetail>();
//var orderMaster = this.orderMasters.First();
string huId = hu.HuId;
//先按开始日期排序，在按订单序号排序
//foreach (var om in orderMasters.OrderBy(o => o.StartTime))
//{
// orderDetails.AddRange(om.OrderDetails.Where(o => o.OrderedQty > o.ShippedQty).OrderBy(o => o.Sequence));
//}
var matchedOrderDetail = this.orderMaster.OrderDetails.Where(o => o.Item == hu.Item && o.IsScanHu).FirstOrDefault();
if (matchedOrderDetail == null)
{
throw new BusinessException("分装生产单{0}不需要扫描零件号为{1}的零件。", this.orderMaster.OrderNo, hu.Item);
}
else
{
if (matchedOrderDetail.OrderedQty != hu.Qty)
{
throw new BusinessException("条码{0}的数量不等于零件{1}需要投入的数量。", huId, hu.Item);
}
}
matchedOrderDetail.ReceivedQty = hu.Qty;
matchedOrderDetail.CurrentQty = matchedOrderDetail.CurrentQty - hu.Qty;
#endregion
OrderDetailInput orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = hu.HuId;
orderDetailInput.ReceiveQty = hu.Qty;
orderDetailInput.LotNo = hu.LotNo;
orderDetailInput.Id = matchedOrderDetail.Id;
if (hu.Status == HuStatus.Location)
{
orderDetailInput.IsHuInLocation = true;
}
else
{
orderDetailInput.IsHuInLocation = false;
}
this.orderDetailInputs.Add(orderDetailInput);
this.lblMessage.Text = "请扫描关键件条码或者子生产单。";
base.hus.Insert(0, hu);
}
else
{
#region 取消
this.CancelHu(hu);
#endregion
}
this.gvListDataBind();
}
private void MatchOrderMaster(Hu hu)
{
if (hu == null)
{
throw new BusinessException("条码不存在");
}
hu.CurrentQty = hu.Qty;
var matchHu = this.hus.Where(h => h.HuId.Equals(hu.HuId, StringComparison.OrdinalIgnoreCase));
#region 取消条码
if (this.isCancel)
{
if (matchHu == null || matchHu.Count() == 0)
{
throw new BusinessException("没有需要取消匹配条码:{0}", hu.HuId);
}
else if (matchHu.Count() == 1)
{
this.CancelHu(hu);
}
else
{
throw new Exception("匹配了多个条码");
}
}
#endregion
#region 检查条码并匹配收货条件。
else
{
if (hu.IsFreeze)
{
throw new BusinessException("条码被冻结!");
}
if (this.ipMaster == null &&
(this.orderMasters[0].Type == OrderType.Transfer || this.orderMasters[0].Type == OrderType.SubContractTransfer))
{
if (hu.Status != HuStatus.Location)
{
throw new BusinessException("不在库存中的条码不能被收货");
}
if (!Utility.HasPermission(user.Permissions, null, true, false, hu.Region, null))
{
throw new BusinessException("没有此条码的权限");
}
}
else
{
if (hu.Status == HuStatus.Location)
{
throw new BusinessException("在库存中的条码不能被收货");
}
}
if (this.orderMasters[0].Type == OrderType.Procurement)
{
if (hu.Status == HuStatus.Location)
{
throw new BusinessException("条码已经在库位{0}中", hu.Location);
}
if (hu.Status == HuStatus.Ip)
{
throw new BusinessException("条码已经在途{0}");
}
}
else if (this.orderMasters[0].Type == OrderType.Transfer)
{
if (hu.Status != HuStatus.Location)
{
throw new BusinessException("条码不在库位中");
}
}
if (matchHu != null && matchHu.Count() > 0)
{
throw new BusinessException("条码重复扫描!");
}
if (this.orderMasters[0].OrderStrategy == FlowStrategy.KIT)
{
if (this.orderMasters.Count > 1)
{
this.Reset();
throw new BusinessException("合并收货包括了KIT单，全部取消，重新扫描");
}
//接下来应该是统一的逻辑去处理
}
var orderDetailList = new List<OrderDetail>();
foreach (var om in this.orderMasters)
{
orderDetailList.AddRange(om.OrderDetails);
}
#region 标准匹配流程
List<Hu> inputHus = new List<Hu>();
List<Hu> needRemoveHus = new List<Hu>();
inputHus.Add(hu);
orderDetailList = orderDetailList.OrderByDescending(p => p.RemainReceivedQty).ToList();
//循环条码做非条码匹配
foreach (Hu inputHu in inputHus)
{
//var matchIpDetail = new IpDetail();
//匹配物料，包装，供应商，质量状态(没有手动修改单包装的)
var matchOrderDetailsFirst = new List<OrderDetail>();
matchOrderDetailsFirst = orderDetailList.Where(i => i.Item == inputHu.Item &&
//i.UnitCount == inputHu.UnitCount &&
i.Uom == inputHu.Uom &&
//i.ManufactureParty == inputHu.ManufactureParty &&
i.RemainReceivedQty >= inputHu.Qty &&
i.QualityType == inputHu.QualityType &&
i.IsChangeUnitCount == false).ToList();
if (matchOrderDetailsFirst.Count() > 0)
{
var matchedOrderDetail = matchOrderDetailsFirst.First();
var orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = inputHu.HuId;
orderDetailInput.Id = matchedOrderDetail.Id;
orderDetailInput.LotNo = inputHu.LotNo;
orderDetailInput.ReceiveQty = inputHu.Qty;
matchedOrderDetail.RemainReceivedQty = matchedOrderDetail.RemainReceivedQty - inputHu.Qty;
matchedOrderDetail.CurrentQty = matchedOrderDetail.CurrentQty - inputHu.Qty;
matchedOrderDetail.Carton++;
List<OrderDetailInput> orderDetailsProcess = matchedOrderDetail.OrderDetailInputs.ToList();
orderDetailsProcess.Add(orderDetailInput);
matchedOrderDetail.OrderDetailInputs = orderDetailsProcess.ToArray();
needRemoveHus.Add(inputHu);
}
//匹配物料，供应商，质量状态(手动修改单包装的)
matchOrderDetailsFirst = new List<OrderDetail>();
matchOrderDetailsFirst = orderDetailList.Where(i => i.Item == inputHu.Item &&
i.Uom == inputHu.Uom &&
//i.ManufactureParty == inputHu.ManufactureParty &&
i.RemainReceivedQty >= inputHu.Qty &&
i.QualityType == inputHu.QualityType &&
i.IsChangeUnitCount == true).ToList();
if (matchOrderDetailsFirst.Count() > 0)
{
var matchedOrderDetail = matchOrderDetailsFirst.First();
var orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = inputHu.HuId;
orderDetailInput.Id = matchedOrderDetail.Id;
orderDetailInput.LotNo = inputHu.LotNo;
orderDetailInput.ReceiveQty = inputHu.Qty;
matchedOrderDetail.RemainReceivedQty = matchedOrderDetail.RemainReceivedQty - inputHu.Qty;
matchedOrderDetail.CurrentQty = matchedOrderDetail.CurrentQty - inputHu.Qty;
matchedOrderDetail.Carton++;
List<OrderDetailInput> orderDetailsProcess = matchedOrderDetail.OrderDetailInputs.ToList();
orderDetailsProcess.Add(orderDetailInput);
matchedOrderDetail.OrderDetailInputs = orderDetailsProcess.ToArray();
needRemoveHus.Add(inputHu);
}
}
foreach (var item in needRemoveHus)
{
inputHus.Remove(item);
}
needRemoveHus = new List<Hu>();
//如果inputHus没有全部匹配，接下来匹配物料，包装，质量状态
if (inputHus.Count > 0)
{
foreach (Hu inputHu in inputHus)
{
//var matchIpDetail = new IpDetail();
//再匹配物料，质量状态
var matchOrderDetailsFirst = new List<OrderDetail>();
matchOrderDetailsFirst = orderDetailList.Where(i => i.Item.Equals(inputHu.Item, StringComparison.OrdinalIgnoreCase) &&
//i.UnitCount == inputHu.UnitCount &&
i.Uom == inputHu.Uom &&
//i.ManufactureParty.Equals(inputHu.ManufactureParty, StringComparison.OrdinalIgnoreCase) &&
i.RemainReceivedQty >= inputHu.Qty &&
i.QualityType == inputHu.QualityType &&
i.IsChangeUnitCount == false).ToList();
if (matchOrderDetailsFirst.Count() > 0)
{
var matchedOrderDetail = matchOrderDetailsFirst.First();
var orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = inputHu.HuId;
orderDetailInput.Id = matchedOrderDetail.Id;
orderDetailInput.LotNo = inputHu.LotNo;
orderDetailInput.ReceiveQty = inputHu.Qty;
matchedOrderDetail.RemainReceivedQty = matchedOrderDetail.RemainReceivedQty - inputHu.Qty;
matchedOrderDetail.CurrentQty = matchedOrderDetail.CurrentQty - inputHu.Qty;
matchedOrderDetail.Carton++;
List<OrderDetailInput> orderDetailsProcess = matchedOrderDetail.OrderDetailInputs.ToList();
orderDetailsProcess.Add(orderDetailInput);
matchedOrderDetail.OrderDetailInputs = orderDetailsProcess.ToArray();
needRemoveHus.Add(inputHu);
}
//再匹配物料，包装，质量状态
matchOrderDetailsFirst = new List<OrderDetail>();
matchOrderDetailsFirst = orderDetailList.Where(i => i.Item.Equals(inputHu.Item, StringComparison.OrdinalIgnoreCase) &&
//i.UnitCount == inputHu.UnitCount &&
i.Uom == inputHu.Uom &&
//i.ManufactureParty.Equals(inputHu.ManufactureParty, StringComparison.OrdinalIgnoreCase) &&
i.RemainReceivedQty >= inputHu.Qty &&
i.QualityType == inputHu.QualityType &&
i.IsChangeUnitCount == true).ToList();
if (matchOrderDetailsFirst.Count() > 0)
{
var matchedOrderDetail = matchOrderDetailsFirst.First();
var orderDetailInput = new OrderDetailInput();
orderDetailInput.HuId = inputHu.HuId;
orderDetailInput.Id = matchedOrderDetail.Id;
orderDetailInput.LotNo = inputHu.LotNo;
orderDetailInput.ReceiveQty = inputHu.Qty;
matchedOrderDetail.RemainReceivedQty = matchedOrderDetail.RemainReceivedQty - inputHu.Qty;
matchedOrderDetail.CurrentQty = matchedOrderDetail.CurrentQty - inputHu.Qty;
matchedOrderDetail.Carton++;
List<OrderDetailInput> orderDetailsProcess = matchedOrderDetail.OrderDetailInputs.ToList();
orderDetailsProcess.Add(orderDetailInput);
matchedOrderDetail.OrderDetailInputs = orderDetailsProcess.ToArray();
needRemoveHus.Add(inputHu);
}
}
foreach (var item in needRemoveHus)
{
inputHus.Remove(item);
}
}
//如果还有未匹配成功的就报错
if (inputHus.Count > 0)
{
throw new BusinessException("条码{0}在不满足订单所有收货明细行收货条件", hu.HuId);
}
#endregion
this.gvListDataBind();
this.lblMessage.Text = "请扫描收货物料条码";
this.hus.Add(hu);
#endregion
}
}
protected override void DoSubmit()
{
if ((this.orderMasters == null || this.orderMasters.Count == 0)
&& (this.ipMaster == null))
{
throw new BusinessException("请先扫描订单或送货单。");
}
#region 要货单收货的逻辑
//ORD收货
if (this.ipMaster == null)
{
List<OrderDetail> orderDetailList = new List<OrderDetail>();
List<OrderDetailInput> orderDetailInputList = new List<OrderDetailInput>();
////2012-06-09 丁丁说后台可以接受多个KIT收货。最后讨论的是只有安吉或者外部的才会合并 在前面做判断即可
//if (this.orderMasters.Count > 1)
//{
// if (this.orderMasters.Where(o => o.OrderStrategy == FlowStrategy.KIT).Count() > 0)
// {
// throw new BusinessException("KIT单不能合并收货。");
// }
//}
foreach (var om in orderMasters)
{
if (om.OrderDetails != null)
{
orderDetailList.AddRange(om.OrderDetails);
}
}
//if (orderDetailList.Any(od => od.CurrentQty > 0))
//{
// DialogResult dr = MessageBox.Show("本次收货有未收完的明细,是否继续?", "未全部收货", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button2);
// if (dr == DialogResult.No)
// {
// this.isMark = true;
// //this.tbBarCode.Focus();
// return;
// }
//}
if (this.isScanOne == false)
{
foreach (var orderDetail in orderDetailList)
{
if (orderDetail.OrderedQty - orderDetail.ReceivedQty > 0)
{
var orderDetailInput = new OrderDetailInput();
orderDetailInput.Id = orderDetail.Id;
orderDetailInput.ReceiveQty = orderDetail.OrderedQty - orderDetail.ReceivedQty;
orderDetailInputList.Add(orderDetailInput);
}
}
}
else
{
foreach (var orderDetail in orderDetailList)
{
if (orderDetail.OrderDetailInputs != null)
{
orderDetailInputList.AddRange(orderDetail.OrderDetailInputs);
}
}
}
//if (this.orderMasters[0].OrderStrategy == FlowStrategy.KIT && this.orderMasters[0].Status == OrderStatus.InProcess)
//{
// this.smartDeviceService.DoReceiveKit(this.orderMasters[0].OrderNo, this.effDate, base.user.Code);
//}
if (orderDetailInputList.Count == 0)
{
throw new BusinessException("没有扫描条码");
}
//if (this.orderMasters[0].OrderStrategy == FlowStrategy.KIT && this.orderMasters[0].Status == OrderStatus.Submit
// && this.orderMasters[0].OrderDetails.Count(o => o.CurrentQty != 0) > 0)
//{
// throw new BusinessException("必须满足KIT单收货数。");
//}
this.smartDeviceService.DoReceiveOrder(orderDetailInputList.ToArray(), this.effDate, base.user.Code);
}
#endregion
#region ASN收货逻辑
//ASN收货
else
{
List<IpDetailInput> ipDetailInputList = new List<IpDetailInput>();
if (this.ipMaster.IpDetails.Any(od => od.CurrentQty > 0))
{
DialogResult dr = MessageBox.Show("本次收货有未收完的明细,是否继续?", "未全部收货", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button2);
if (dr == DialogResult.No)
{
this.isMark = true;
//this.tbBarCode.Focus();
return;
}
}
//安吉或者外部直送的排序单,全部需要扫描
if (this.ipMaster.Type == IpType.SEQ)
{
////如果是外部的直送的排序单，必须扫描全部关键件
//if (this.ipMaster.PartyFrom == this.smartDeviceService.GetEntityPreference(CodeEnum.WMSAnjiRegion) || this.ipMaster.OrderType == OrderType.ScheduleLine || this.ipMaster.OrderType == OrderType.Procurement)
//{
// foreach (var ipDetail in this.ipMaster.IpDetails)
// {
// //确认关键全部扫描,将条码传给后（排序单所有零件都是关键件）
// if (this.ipMaster.IpDetailInputs.Where(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId)).Count() == 0)
// {
// throw new BusinessException("安吉或者外部直送排序单需扫描全部关键件。");
// }
// var ipDetailInput = this.ipMaster.IpDetailInputs.FirstOrDefault(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId));
// ipDetailInputList.Add(ipDetailInput);
// }
//}
////内部排序要么全部扫描要么全部不扫描
//else
//{
//如果扫了一个必须全部扫描
if (this.isScanOne == true)
{
foreach (var ipDetail in this.ipMaster.IpDetails)
{
if (this.ipMaster.IpDetailInputs.Where(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId)).Count() == 0)
{
throw new BusinessException("已扫入一个或多个条码，需将剩下的条码全部扫描。");
}
var ipDetailInput = this.ipMaster.IpDetailInputs.FirstOrDefault(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId));
ipDetailInputList.Add(ipDetailInput);
}
}
else
{
foreach (var ipDetail in this.ipMaster.IpDetails)
{
//所有零件都直接填充数量传到后台
if (ipDetail.RemainReceivedQty > 0)
{
var ipDetailInput = new IpDetailInput();
ipDetailInput.Id = ipDetail.Id;
ipDetailInput.ReceiveQty = ipDetail.Qty;
ipDetailInputList.Add(ipDetailInput);
}
}
}
//}
}
//如果是KIT需要区分内部和外部，外部的KIT不需要扫描条码，内部的必须扫描全部关键件。
if (this.ipMaster.Type == IpType.KIT)
{
//外部送货的KIT单
if (this.ipMaster.PartyFrom == this.smartDeviceService.GetEntityPreference(CodeEnum.WMSAnjiRegion) || this.ipMaster.OrderType == OrderType.ScheduleLine || this.ipMaster.OrderType == OrderType.Procurement)
{
foreach (var ipDetail in this.ipMaster.IpDetails)
{
//所有零件都直接填充数量传到后台
if (ipDetail.RemainReceivedQty > 0)
{
var ipDetailInput = new IpDetailInput();
ipDetailInput.Id = ipDetail.Id;
ipDetailInput.ReceiveQty = ipDetail.Qty;
ipDetailInputList.Add(ipDetailInput);
}
}
//ipDetailInputList.AddRange(this.ipMaster.IpDetailInputs);
}
//内部移库的KIT单
else
{
foreach (var ipDetail in this.ipMaster.IpDetails)
{
//确认关键全部扫描,将条码传给后台
if (ipDetail.IsScanHu == true)
{
if (this.ipMaster.IpDetailInputs.Where(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId)).Count() == 0)
{
throw new BusinessException("内部KIT单需要扫描全部关键件");
}
var ipDetailInput = this.ipMaster.IpDetailInputs.FirstOrDefault(i => i.Id == ipDetail.Id && !string.IsNullOrEmpty(i.HuId));
ipDetailInputList.Add(ipDetailInput);
}
//非关键件直接填充数量
else if (ipDetail.RemainReceivedQty > 0)
{
var ipDetailInput = new IpDetailInput();
ipDetailInput.Id = ipDetail.Id;
ipDetailInput.ReceiveQty = ipDetail.Qty;
ipDetailInputList.Add(ipDetailInput);
}
}
//ipDetailInputList.AddRange(this.ipMaster.IpDetailInputs);
}
}
//如果普通收货没有有扫描条码的，全部按数量收货
if (this.isScanOne == false && this.ipMaster.IpDetailInputs.Count() == 0 && this.ipMaster.Type != IpType.KIT && this.ipMaster.Type != IpType.SEQ)
{
foreach (var ipDetail in this.ipMaster.IpDetails)
{
if (ipDetail.Qty - ipDetail.ReceivedQty > 0)
{
var ipDetailInput = new IpDetailInput();
ipDetailInput.Id = ipDetail.Id;
ipDetailInput.ReceiveQty = ipDetail.Qty - ipDetail.ReceivedQty;
ipDetailInputList.Add(ipDetailInput);
}
}
}
else
{
foreach (var ipDetailInput in this.ipMaster.IpDetailInputs)
{
//ipDetailInput.ReceiveQty = ipDetailInput.ReceiveQty;
if (ipDetailInput.ReceiveQty > 0)
{
ipDetailInputList.Add(ipDetailInput);
}
}
}
if (ipDetailInputList.Count == 0)
{
this.Reset();
throw new BusinessException("本次收货出现错误，请重新收货");
}
this.smartDeviceService.DoReceiveIp(ipDetailInputList.ToArray(), this.effDate, base.user.Code);
#endregion
}
this.Reset();
base.lblMessage.Text = "收货成功";
}