/// Updates motion laws, etc. for the impose rotation / impose speed modes
public override void UpdateTime(double mytime)
{
// First, inherit to parent class
base.UpdateTime(mytime);
if (!IsActive())
{
return;
}
// DEFAULTS compute rotation vars...
// by default for torque control..
motion_axis = ChVector.VECT_Z; // motion axis is always the marker2 Z axis (in m2 relative coords)
mot_rot = relAngle;
mot_rot_dt = ChVector.Vdot(relWvel, motion_axis);
mot_rot_dtdt = ChVector.Vdot(relWacc, motion_axis);
mot_rerot = mot_rot / mot_tau;
mot_rerot_dt = mot_rot_dt / mot_tau;
mot_rerot_dtdt = mot_rot_dtdt / mot_tau;
// nothing more to do here for torque control
if (eng_mode == eCh_eng_mode.ENG_MODE_TORQUE)
{
return;
}
// If LEARN MODE, just record motion
if (learn)
{
deltaC.pos = ChVector.VNULL;
deltaC_dt.pos = ChVector.VNULL;
deltaC_dtdt.pos = ChVector.VNULL;
if (!(limit_Rx.Get_active() || limit_Ry.Get_active() || limit_Rz.Get_active()))
{
deltaC.rot = ChQuaternion.QUNIT;
deltaC_dt.rot = ChQuaternion.QNULL;
deltaC_dtdt.rot = ChQuaternion.QNULL;
}
if (eng_mode == eCh_eng_mode.ENG_MODE_ROTATION)
{
if (rot_funct.Get_Type() != ChFunction.FunctionType.FUNCT_RECORDER)
{
rot_funct = new ChFunction_Recorder();
}
// record point
double rec_rot = relAngle; // ***TO DO*** compute also rotations with cardano mode?
if (impose_reducer)
{
rec_rot = rec_rot / mot_tau;
}
ChFunction_Recorder rec = (ChFunction_Recorder)rot_funct;
rec.AddPoint(mytime, rec_rot, 1); // x=t
}
if (eng_mode == eCh_eng_mode.ENG_MODE_SPEED)
{
if (spe_funct.Get_Type() != ChFunction.FunctionType.FUNCT_RECORDER)
{
spe_funct = new ChFunction_Recorder();
}
// record point
double rec_spe = ChVector.Vlength(relWvel); // ***TO DO*** compute also with cardano mode?
if (impose_reducer)
{
rec_spe = rec_spe / mot_tau;
}
ChFunction_Recorder rec = (ChFunction_Recorder)spe_funct;
rec.AddPoint(mytime, rec_spe, 1); // x=t
}
}
if (learn)
{
return; // no need to go on further...--.>>>
}
// Impose relative positions/speeds
deltaC.pos = ChVector.VNULL;
deltaC_dt.pos = ChVector.VNULL;
deltaC_dtdt.pos = ChVector.VNULL;
if (eng_mode == eCh_eng_mode.ENG_MODE_ROTATION)
{
if (impose_reducer)
{
mot_rerot = rot_funct.Get_y(ChTime);
mot_rerot_dt = rot_funct.Get_y_dx(ChTime);
mot_rerot_dtdt = rot_funct.Get_y_dxdx(ChTime);
mot_rot = mot_rerot * mot_tau;
mot_rot_dt = mot_rerot_dt * mot_tau;
mot_rot_dtdt = mot_rerot_dtdt * mot_tau;
}
else
{
mot_rot = rot_funct.Get_y(ChTime);
mot_rot_dt = rot_funct.Get_y_dx(ChTime);
mot_rot_dtdt = rot_funct.Get_y_dxdx(ChTime);
mot_rerot = mot_rot / mot_tau;
mot_rerot_dt = mot_rot_dt / mot_tau;
mot_rerot_dtdt = mot_rot_dtdt / mot_tau;
}
deltaC.rot = ChQuaternion.Q_from_AngAxis2(mot_rot, motion_axis);
deltaC_dt.rot = ChQuaternion.Qdt_from_AngAxis(deltaC.rot, mot_rot_dt, motion_axis);
deltaC_dtdt.rot = ChQuaternion.Qdtdt_from_AngAxis(mot_rot_dtdt, motion_axis, deltaC.rot, deltaC_dt.rot);
}
if (eng_mode == eCh_eng_mode.ENG_MODE_SPEED)
{
if (impose_reducer)
{
mot_rerot_dt = spe_funct.Get_y(ChTime);
mot_rerot_dtdt = spe_funct.Get_y_dx(ChTime);
mot_rot_dt = mot_rerot_dt * mot_tau;
mot_rot_dtdt = mot_rerot_dtdt * mot_tau;
}
else
{
mot_rot_dt = spe_funct.Get_y(ChTime);
mot_rot_dtdt = spe_funct.Get_y_dx(ChTime);
mot_rerot_dt = mot_rot_dt / mot_tau;
mot_rerot_dtdt = mot_rot_dtdt / mot_tau;
}
deltaC.rot = ChQuaternion.Qnorm(GetRelM().rot); // just keep current position, -assume always good after integration-.
ChMatrix33 <double> relA = new ChMatrix33 <double>(0);
relA.Set_A_quaternion(GetRelM().rot); // ..but adjust to keep Z axis aligned to shaft, anyway!
ChVector displaced_z_axis = relA.Get_A_Zaxis();
ChVector adjustment = ChVector.Vcross(displaced_z_axis, ChVector.VECT_Z);
deltaC.rot = ChQuaternion.Q_from_AngAxis2(ChVector.Vlength(adjustment), ChVector.Vnorm(adjustment)) % deltaC.rot;
deltaC_dt.rot = ChQuaternion.Qdt_from_AngAxis(deltaC.rot, mot_rot_dt, motion_axis);
deltaC_dtdt.rot = ChQuaternion.Qdtdt_from_AngAxis(mot_rot_dtdt, motion_axis, deltaC.rot, deltaC_dt.rot);
}
}
public ChFunction_Recorder(ChFunction_Recorder other)
{
m_points = other.m_points;
m_last = m_points[m_points.Count - 1];
}