/// <summary>
/// Called when an intent is received from "StartService" requesting some action.
/// The command is put onto the message queue.
/// </summary>
/// <param name="intent">The received intent</param>
/// <param name="flags">not used</param>
/// <param name="startId">not used</param>
/// <returns></returns>
public override StartCommandResult OnStartCommand(Intent intent, StartCommandFlags flags, int startId)
{
string[] extras = new string[] { BundleConst.bundleCmdTag, BundleConst.bundleAddrTag, BundleConst.bundleValTag };
AppLog.Log("RCS-StartCommandResult");
if (intent == null)
{
AppLog.Log("RCS-StartCommandResult - Intent is null");
return(StartCommandResult.Sticky);;
}
try
{
Message msg = handler.ObtainMessage();
msg.Arg1 = startId;
msg.What = (int)AppConst.MsgPrio.low;
foreach (string s in extras)
{
if (intent.Extras.ContainsKey(s))
{
msg.Data.PutString(s, intent.GetStringExtra(s));
}
}
if (intent.Extras.ContainsKey(BundleConst.bundleDataTag))
{
msg.Data.PutByteArray(BundleConst.bundleDataTag, intent.GetByteArrayExtra(BundleConst.bundleDataTag));
}
handler.SendMessage(msg);
}
catch (Throwable e)
{
AppLog.Log("RCS-StartCommandResult - exception: " + e.ToString());
}
return(StartCommandResult.Sticky);
}
/// <summary>
/// The actual read thread
/// </summary>
/// <param name="service">Service instance to access public members</param>
public void ReadProc(object service)
{
int byteRead; // We read one byte at a time
bool twoByteFlag = false; // Set if we've read the first byte of a two-byte sequence
int secondByte = 0; // The second byte of the sequence (may denoted device type)
Message msg;
serviceContext = (RemoteCommunicationService)service;
try
{
while ((byteRead = inputStream.ReadByte()) >= 0)
{
AppLog.Log("RCS-ReadProc; reading: " + byteRead.ToString());
switch (serviceContext.serviceState)
{
case AppConst.ActivityState.idle: // We shouldn't actually get here as the read thread should only be started in connected state
serviceContext.lastReport = 0;
twoByteFlag = false;
break;
case AppConst.ActivityState.connected:
if (twoByteFlag) // We are connected, but the handshake is in progress. Check if we're reading the second byte of a sequence
{
secondByte = byteRead;
twoByteFlag = false;
if (secondByte < 128)
{
UpdateState(AppConst.ActivityState.synced);
serviceContext.lastReport = 0;
}
break;
}
if (byteRead < 127) // As soon as we have a byte with the top bit clear, the handshake is complete (may occur immediately on reconnecting to device)
{
UpdateState(AppConst.ActivityState.synced);
serviceContext.lastReport = 0;
twoByteFlag = false;
}
else if (byteRead == 128) // If we've received a byte with the top bit set, send "key up" message to handshake the recorder
{
twoByteFlag = true;
msg = serviceContext.handler.ObtainMessage();
msg.What = (int)AppConst.MsgPrio.low;
msg.Data.PutString(BundleConst.bundleCmdTag, BundleConst.cmdSend);
msg.Data.PutByteArray(BundleConst.bundleDataTag, promptSequence);
serviceContext.handler.SendMessage(msg);
}
break;
case AppConst.ActivityState.synced: // If top bit set, the handshake has been lost (eg bluetooth device has been unplugged from recorder)
if (byteRead > 127)
{
UpdateState(AppConst.ActivityState.connected);
twoByteFlag = true;
}
else
{
twoByteFlag = false;
if (serviceContext.lastReport != byteRead)
{
SendData(byteRead);
}
serviceContext.lastReport = byteRead;
}
break;
}
}
}
// Most likely called when the other thread closes the bluetooth socket on disconnecting
catch (Throwable e)
{
AppLog.Log("RCS-ReadProc; exception: " + e.ToString());
try
{
inputStream.Close();
}
catch (Throwable)
{
AppLog.Log("RCS-ReadProc; stream close exception: " + e.ToString());
}
}
}
/// <summary>
/// Process a message from the queue (CONNECT, DISCONNECT, SEND or STOP)
/// </summary>
/// <param name="msg">The message being delivered by the Looper</param>
public override void HandleMessage(Message msg)
{
string command = msg.Data.GetString(BundleConst.bundleCmdTag);
Intent statusIntent;
bool done = true;
if (!done)
{
return;
}
AppLog.Log("RCS-HandleMessage: " + command);
try
{
switch (command)
{
case BundleConst.cmdConnect: // Connection request
if (serviceContext.serviceState != AppConst.ActivityState.idle && serviceContext.serviceState != AppConst.ActivityState.error)
{
// If we're already connected, prod the UI with the last reported status
serviceContext.serviceState = AppConst.ActivityState.connected;
outputStream.Write(promptSequence, 0, promptSequence.Length); // Try to elicit a response in case we were previously connected.
SendData(serviceContext.lastReport);
return;
}
try
{
string deviceAddr = msg.Data.GetString(BundleConst.bundleAddrTag); // Get the Bluetooth device address
btDevice = BluetoothAdapter.DefaultAdapter.GetRemoteDevice(deviceAddr);
btSocket = btDevice.CreateInsecureRfcommSocketToServiceRecord(AppConst.uuid);
btSocket.Connect(); // Connect the socket
AppLog.Log("RCS-HandleMessage: " + command + "; connected device " + deviceAddr);
inputStream = Stream.Synchronized(btSocket.InputStream);
outputStream = Stream.Synchronized(btSocket.OutputStream);
serviceContext.serviceState = AppConst.ActivityState.connected;
readThreadObject = new ReadThread(inputStream);
readThread = new System.Threading.Thread(readThreadObject.ReadProc); // Start the read thread
readThread.Start(serviceContext);
outputStream.Write(promptSequence, 0, promptSequence.Length); // Try to elicit a response in case we were previously connected.
AppLog.Log("RCS-HandleMessage: " + command + "; created threads");
}
catch (Throwable e)
{
try
{
if (btSocket != null)
{
btSocket.Close();
}
}
catch
{
}
AppLog.Log("RCS-HandleMessage: " + command + "; exception: " + e.ToString());
done = false;
}
statusIntent = new Intent(AppConst.rxIntentName); // Send the status to the activity
statusIntent.PutExtra(BundleConst.bundleCmdTag, BundleConst.bundleStatusTag);
if (done)
{
serviceContext.serviceState = AppConst.ActivityState.connected;
}
else
{
serviceContext.serviceState = AppConst.ActivityState.error;
}
statusIntent.PutExtra(BundleConst.bundleValTag, (int)serviceContext.serviceState);
serviceContext.SendBroadcast(statusIntent);
if (!done)
{
CloseConnection(msg.Arg1);
}
break;
case BundleConst.cmdDisconnect: // Disconnect request
CloseConnection(msg.Arg1);
serviceContext.serviceState = AppConst.ActivityState.idle;
statusIntent = new Intent(AppConst.rxIntentName);
statusIntent.PutExtra(BundleConst.bundleCmdTag, BundleConst.bundleStatusTag);
statusIntent.PutExtra(BundleConst.bundleValTag, (int)serviceContext.serviceState);
serviceContext.SendBroadcast(statusIntent); // Update status
break;
case BundleConst.cmdSend: // Send data
if (serviceContext.serviceState == AppConst.ActivityState.connected || serviceContext.serviceState == AppConst.ActivityState.synced)
{
try
{
byte[] devCmd;
devCmd = msg.Data.GetByteArray(BundleConst.bundleDataTag);
outputStream.Write(devCmd, 0, devCmd.Length);
AppLog.Log("RCS-HandleMessage: " + command + "; sent: " + devCmd.ToString());
}
catch (Throwable e)
{
AppLog.Log("RCS-HandleMessage: " + command + "; exception: " + e.ToString());
done = false;
}
}
else
{
done = false;
}
if (!done) // Update status on error
{
statusIntent = new Intent(AppConst.rxIntentName);
statusIntent.PutExtra(BundleConst.bundleCmdTag, BundleConst.bundleStatusTag);
statusIntent.PutExtra(BundleConst.bundleValTag, (int)AppConst.ActivityState.error);
serviceContext.SendBroadcast(statusIntent);
CloseConnection(msg.Arg1);
}
break;
}
}
catch (Throwable e)
{
AppLog.Log("RCS-HandleMessage: " + command + "; exception: " + e.ToString());
}
}