//See ..\README.md for more information
private void UpdateUnit(UriBuilder url, String userName, String passWord)
{
JObject resObj;
JObject reqObj;
url.Path = "DDOProtocol/GETUNITLIST";
reqObj = new JObject();
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
JArray jsObj = WSRestApiUtil.GetJSONValue <JArray>(resObj, "UnitList");
foreach (JToken jt in jsObj)
{
JObject en = jt as JObject;
String unitName = WSRestApiUtil.GetJSONValue <String>(en, "Unit");
AddLine(unitName);
//If we found the unit then populate a new reqObj with the unit
if (unitName == "WL2")
{
AddLine("Found it");
break;
}
}
}
//See ..\README.md for more information
private void UpdateJob(UriBuilder url, String userName, String passWord)
{
JObject resObj;
JObject reqObj;
//Use Api Util to generate the proper guid format
String jobGuid = WSRestApiUtil.NewGuid();
String instanceGuid = WSRestApiUtil.NewGuid();
//Create a new edit session around the job. On the WorkStudio Server multiple edit sessions
//can exist at the same time. The edit session provides a means of only allowing one edit
//to a job at a time.
url.Path = "DDOProtocol/CREATEEDITSESSION";
reqObj = new JObject();
//Required field
reqObj["SessionType"] = "TEditJobHeaderSession";
//**UPDATE THIS FIELD**
//Required field
reqObj["jobGUID"] = jobGuid;
//Required field
reqObj["InstanceGUID"] = instanceGuid;
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
//Lookup the edit session id. The session id will be used to interact with the
//edit session and job.
//Note: WorkStudio does not always gaurantee that case of properties will be honored.
String sessionID = WSRestApiUtil.GetJSONValue <string>(resObj, "SessionID");
//Update the data contained inside of the job in memory on the server. This call is used to update
//each field that is updated it also will call all of the needed OnChange() scripts needing to be fired.
//Fields that do not need to be updated can be excluded from this call.
reqObj = new JObject();
//Required field
reqObj["SessionID"] = sessionID;
//Required field
reqObj["InstanceGUID"] = instanceGuid;
//Required field: The type of data we are updating.
reqObj["CustomGroupType"] = "JOB";
//Required field: Used when there is a UI that controls how an end user interacts with the data in fields.
//The recaculation will determine the visibility, ability to be editted, etc. of each field. This is
//most likely not needed to be true when a user interface is not involved on the calling end.
reqObj["RecalculateFieldProperties"] = true;
//Required field: Used when there is a UI that shows the visibility of tabs for the data.
//This is most likely not needed to be true when a user interface is not involved on the
//calling end.
reqObj["RecalculateTabVisibility"] = true;
//Required field: The name of the field being updated that is needing an OnChange script to be
//fired. An example would be a field that is used to populate another field that is changed
//when the OnChange script is fired.
reqObj["OnChangeFieldName"] = sessionID;
//Required field: A JSON object that will contain the fields that are looking to be updated in the specified
//WorkStudio Job. Fields in the first level are what have been known as "Static Fields". These fields will
//exist for all instances of WorkStudio for all GeoDigital customers.
JObject jobData = new JObject();
reqObj["JobData"] = jobData;
//Required if this is a new job.
//Optional if this is an existing job. Existing value will be maintained if omitted.
jobData["JobGuid"] = jobGuid;
//**UPDATE THIS FIELD**
//Required if this is a new job.
//Optional if this is an existing job. Existing value will be maintained if omitted.
jobData["WO"] = "Test: " + DateTime.Now.ToString();
//**UPDATE THIS FIELD**
//Required if this is a new job.
//Optional if this is an existing job. Existing value will be maintained if omitted.
jobData["JobTitle"] = "Job Title";
//**UPDATE THIS FIELD**
//Required if this is a new job.
//Optional if this is an existing job. Existing value will be maintained if omitted.
jobData["JobType"] = "Electrical";
//**UPDATE THIS FIELD**
//Required if this is a new job.
//NOT USED if this is an existing job. Use the job transition protocols in order to change
//job status on existing jobs.
jobData["JobStatus"] = "A";
//Optional field. This object contains all of the custom fields that are particular to the
//WorkStudio instance. Static fields are the same for every customer and custom fields
//can be different for every customer depending on their workflow and use cases for the software.
//This field might be optional, however, it is most likely thing thing that will be used most
//in this API.
JObject customData = new JObject();
jobData["CustomData"] = customData;
//**UPDATE THIS FIELD**
//Optional field. The field that is desired to be updated. Omitting any fields
//will result in the field being maintained.
customData["MyField"] = "hello world";
url.Path = "DDOProtocol/EDITSESSIONJOBVISUALFIELDUPDATE";
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
//Save the job that is referenced and held in memory for the edit session to the databases.
//Simply calling EDITSESSIONJOBVISUALFIELDUPDATE only makes changes to the job in memory.
//The job is actually written to the database by calling SAVEEDITSESSIONJOB.
reqObj = new JObject();
//Required field
reqObj["SessionID"] = sessionID;
//Required field
reqObj["InstanceGUID"] = instanceGuid;
url.Path = "DDOProtocol/SAVEEDITSESSIONJOB";
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
//Cleanup the edit session that was created in a prior step. This call will close the edit session
//if there are no other holders of the particular edit session. If there is another
//edit session, it will be held open until closed by the other instance. WorkStudio Server
//will handle these details. The caller is just responsible for calling CLOSEEDITSESSION.
reqObj = new JObject();
//Required field
reqObj["SessionID"] = sessionID;
//Required field
reqObj["InstanceGUID"] = instanceGuid;
url.Path = "DDOProtocol/CLOSEEDITSESSION";
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
}
//See ..\README.md for more information
private void ExecuteUIAction(UriBuilder url, String userName, String passWord)
{
url.Path = "DDOProtocol/EXECUTEUIACTION";
JObject resObj;
JObject reqObj;
reqObj = new JObject();
//**UPDATE THIS FIELD**
//The name of the UIAction to execute. See the ReadMe.md file to see better
//definition around how to set this up.
reqObj["UIActionName"] = "TestUIAction";
JArray actParams = new JArray();
//The parameters array.
reqObj["Parameters"] = actParams;
JObject actParam;
actParam = new JObject();
actParams.Add(actParam);
//Set to TObjectParameter
actParam["_ClassName"] = "TObjectParameter";
//**UPDATE THIS FIELD**
//The name of the object that shows up in the script. See the ReadMe.md file to see better
//definition around how to set this up.
actParam["ParamName"] = "Data";
//Leave blank
actParam["Description"] = "";
//Set to false
actParam["Required"] = false;
//Set to false
actParam["UserParam"] = false;
actParam["ParameterType"] = "ptInput";
//A TDataObj type tells WorkStudio server to use an "object type" instance. TDataObj is the most flexible
//and would be recommended for integrations.
actParam["ObjectClass"] = "TDataObj";
//**UPDATE THIS FIELD** (All data in dataPayload is meant to be modified by the author of this
//REST API)
JObject dataPayload = new JObject();
//The paramvalue is the payload that is whatever is desired to be sent to the WorkStudio Action script to be manipulated.
actParam["ParamValue"] = dataPayload;
dataPayload["filename"] = "GDI.png";
//Demonstrate how we could get a binary payload (image, pdf, word document, etc.) to the WorkStudio server to be able to be
//manipulated from a script. We have included GeoDigitalLog.png as a resource in the project to demonstrate this. The same
//logic could easily be modified to directly use a file on a hard drive.
using (MemoryStream mem = new MemoryStream())
{
Resources.GeoDigitalLogo.Save(mem, ImageFormat.Png);
mem.Seek(0, SeekOrigin.Begin);
String base64Str = Convert.ToBase64String(mem.ToArray());
dataPayload["LogoPngBase64"] = base64Str;
}
resObj = HttpUtil.Http(url.ToString(), userName, passWord, reqObj, AddLine);
if (String.Equals(WSRestApiUtil.GetJSONValue <String>(resObj, "Protocol"), "OK", StringComparison.CurrentCultureIgnoreCase))
{
//We will now find the value that was returned from the server
//First we need to search through the response parameters and find our parameter named "Data"
JArray resParams = WSRestApiUtil.GetJSONValue <JArray>(resObj, "Parameters");
foreach (JToken jt in resParams)
{
JObject en = jt as JObject;
String paramName = WSRestApiUtil.GetJSONValue <String>(en, "ParamName");
if (!paramName.Equals("Data", StringComparison.CurrentCultureIgnoreCase))
{
continue;
}
JObject dataPayload2 = WSRestApiUtil.GetJSONValue <JObject>(en, "ParamValue");
AddLine($"The response from the server is: {WSRestApiUtil.GetJSONValue<String>(dataPayload2, "ResponseFromServer")}");
}
}
else
{
//An error occurred
AddLine($"An error occured while attempting to execute the UIAction: {WSRestApiUtil.GetJSONValue<String>(resObj, "errorMessage")}");
}
}
