static public double FindTilt(Vector.MemorySafe_CartVect normalVector)
{
double calculatedTilt = -999;
//may need to also take into account other factors that, at this stage, seem to not be important
//building Direction of Relative North
//zone Direction of Relative North
//GlobalGeometryRules coordinate system
//I may need to know this in the future then rotate the axis vectors I am making below
//x-axis [1 0 0] points east, y-axis [0 1 0] points north, z-axis[0 0 1] points up to the sky
//alignment with y axis means north pointing, alignment with z-axis means it is pointing up to the sky (like a flat roof)
double nX = 0;
double nY = 1;
double nZ = 0;
Vector.MemorySafe_CartVect northVector = new Vector.MemorySafe_CartVect(nX, nY, nZ);
double uX = 0;
double uY = 0;
double uZ = 1;
Vector.MemorySafe_CartVect upVector = new Vector.MemorySafe_CartVect(uX, uY, uZ);
//rotate the axis vectors for the future
//ensure the vector passed into the function is a unit vector
normalVector = Vector.UnitVector(normalVector);
//get tilt: cross product of normal vector and upVector
//since parallel and anti parallel vectors will return the same cross product [0,0,0] I need to filter out the antiparalll case
if (normalVector.X == upVector.X * -1 && normalVector.Y == upVector.Y * -1 && normalVector.Z == upVector.Z * -1)
{
calculatedTilt = 180;
return calculatedTilt;
}
else
{
Vector.MemorySafe_CartVect tiltVector = Vector.CrossProduct(normalVector, upVector);
double tiltVectorMagnitude = Vector.VectorMagnitude(tiltVector);
calculatedTilt = Math.Round(Math.Asin(tiltVectorMagnitude) * 180 / Math.PI, 2);
return calculatedTilt;
}
}
public static double FindAzimuth(Vector.MemorySafe_CartVect normalVector)
{
double calculatedAzimuth = -999;
//may need to also take into account other factors that, at this stage, seem to not be important
//building Direction of Relative North
//zone Direction of Relative North
//GlobalGeometryRules coordinate system
//I may need to know this in the future then rotate the axis vectors I am making below
//x-axis [1 0 0] points east, y-axis [0 1 0] points north, z-axis[0 0 1] points up to the sky
//alignment with y axis means north pointing, alignment with z-axis means it is pointing up to the sky (like a flat roof)
Vector.MemorySafe_CartVect northVector = new Vector.MemorySafe_CartVect(0, 1, 0);
Vector.MemorySafe_CartVect southVector = new Vector.MemorySafe_CartVect(0, -1, 0);
Vector.MemorySafe_CartVect eastVector = new Vector.MemorySafe_CartVect(1, 0, 0);
Vector.MemorySafe_CartVect westVector = new Vector.MemorySafe_CartVect(-1, 0, 0);
Vector.MemorySafe_CartVect upVector = new Vector.MemorySafe_CartVect(0, 0, 1);
//rotate the axis vectors for the future
//ensure the vector passed into the function is a unit vector
normalVector = Vector.UnitVector(normalVector);
//get X-Y projection of the normal vector
//normalVector.Z = 0;
//get azimuth: cross product of normal vector x-y projection and northVector
//2-14-2014 we added last two statements to deal with normal
//1st quadrant
if ((normalVector.X == 0 && normalVector.Y == 1) || (normalVector.X == 1 && normalVector.Y == 0) || (normalVector.X > 0 && normalVector.Y > 0) || (normalVector.X > 0 && normalVector.Z != 0) || (normalVector.Y > 0 && normalVector.Z != 0))
{
//get azimuth: cross product of normal vector x-y projection and northVector
Vector.MemorySafe_CartVect azVector = Vector.CrossProduct(normalVector, northVector);
double azVectorMagnitude = Vector.VectorMagnitude(azVector);
//modification for when the vector is in different quadrants
calculatedAzimuth = Math.Round(Math.Asin(azVectorMagnitude) * 180 / Math.PI, 2);
return calculatedAzimuth;
}
//second quadrant
else if ((normalVector.X < 0 && normalVector.Y > 0) )
{
Vector.MemorySafe_CartVect azVector = Vector.CrossProduct(normalVector, westVector);
double azVectorMagnitude = Vector.VectorMagnitude(azVector);
//modification for when the vector is in different quadrants
calculatedAzimuth = Math.Round(Math.Asin(azVectorMagnitude) * 180 / Math.PI, 2) + 270;
return calculatedAzimuth;
}
//quadrant 3
else if ((normalVector.X < 0 && normalVector.Y < 0) || (normalVector.X == -1 && normalVector.Y == 0) || (normalVector.X < 0 && normalVector.Z !=0))
{
Vector.MemorySafe_CartVect azVector = Vector.CrossProduct(normalVector, southVector);
double azVectorMagnitude = Vector.VectorMagnitude(azVector);
//modification for when the vector is in different quadrants
calculatedAzimuth = Math.Round(Math.Asin(azVectorMagnitude) * 180 / Math.PI, 2) + 180;
return calculatedAzimuth;
}
//quadrant 4
else if ((normalVector.X > 0 && normalVector.Y < 0) || (normalVector.X == 0 && normalVector.Y == -1) || (normalVector.Y < 0 && normalVector.Z != 0))
{
Vector.MemorySafe_CartVect azVector = Vector.CrossProduct(normalVector, eastVector);
double azVectorMagnitude = Vector.VectorMagnitude(azVector);
//modification for when the vector is in different quadrants
calculatedAzimuth = Math.Round(Math.Asin(azVectorMagnitude) * 180 / Math.PI, 2) + 90;
return calculatedAzimuth;
}
//this will happen to vectors that point straight down or straight up because we are only interested in the X-Y projection and set the Z to zero anyways
else if (normalVector.X == 0 && normalVector.Y == 0)
{
calculatedAzimuth = 0;
return calculatedAzimuth;
}
//get the
return calculatedAzimuth;
}
private static DOEgbXMLReportingObj GetOpeningPolyLoopCoordMatch(Vector.MemorySafe_CartCoord standardPolyLoopCoord, OpeningDefinitions testOpening, DOEgbXMLReportingObj report, string standardOpeningId)
{
List<Vector.MemorySafe_CartCoord> possibleMatch = new List<Vector.MemorySafe_CartCoord>();
List<Vector.MemorySafe_CartCoord> exactMatch = new List<Vector.MemorySafe_CartCoord>();
report.MessageList.Add("Testing Polyloop coordinates for Standard opening " + standardOpeningId);
report.MessageList.Add(" X: " + standardPolyLoopCoord.X.ToString() + ", Y: " + standardPolyLoopCoord.Y.ToString() + ", Z: " + standardPolyLoopCoord.Z.ToString());
foreach (Vector.MemorySafe_CartCoord testPolyLoopCoord in testOpening.PlCoords)
{
//find an appropriate match
double diffX = Math.Abs(testPolyLoopCoord.X - standardPolyLoopCoord.X);
if (diffX < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//found a perfect X Match
if (diffX == 0)
{
//test Y
double diffY = Math.Abs(testPolyLoopCoord.Y - standardPolyLoopCoord.Y);
if (diffY < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Y Match
if (diffY == 0)
{
double diffZ = Math.Abs(testPolyLoopCoord.Z - standardPolyLoopCoord.Z);
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " exactly");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
exactMatch.Add(testPolyLoopCoord);
}
else
{
//not a perfect Z match but within bounds
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " X and Y coordinates exactly. Z coordinate within allowable tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z coordinate not within tolerance
continue;
}
}
//Y Match is within the allowable tolerance
else
{
double diffZ = Math.Abs(testPolyLoopCoord.Z - standardPolyLoopCoord.Z);
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " in the X and Z coordinates, exactly. Y coordinate is within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " X exactly. Y and Z coordinates are within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z coordinate is not within tolerance
continue;
}
}
}
else
{
//a y match could not be found within tolerance
continue;
}
}
else
{
//not a perfect X match, but within tolerance
//test Y
double diffY = Math.Abs(testPolyLoopCoord.Y - standardPolyLoopCoord.Y);
if (diffY < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Y Match
if (diffY == 0)
{
double diffZ = Math.Abs(testPolyLoopCoord.Z - standardPolyLoopCoord.Z);
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " Y and Z coordinate exactly. X is within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
report.MessageList.Add("Test Opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " Y coordinate exactly. X and Z is within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z is not matched so continue
continue;
}
}
// the Y match is not perfect but within tolerance
else
{
double diffZ = Math.Abs(testPolyLoopCoord.Z - standardPolyLoopCoord.Z);
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
report.MessageList.Add("Test opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + " Z coordinate exactly. The X and Y coordinates are within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
report.MessageList.Add("Test opening " + testOpening.OpeningId + ": Found polyLoop coordinate that matches Standard Opening " + standardOpeningId + ". The X, Y, and Z coordinates are within tolerance.");
report.MessageList.Add("Test Opening " + testOpening.OpeningId);
report.MessageList.Add(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
// no match found for the Z
else
{
continue;
}
}
}
//no match could be found for the Y
else
{
continue;
}
}
}
else
{
//not a match found for the X and continue
continue;
}
}
if (exactMatch.Count > 1)
{
report.MessageList.Add("Error, overlapping polyLoop coordinates found in the Test Opening PolyLoop.");
report.passOrFail = false;
return report;
}
else if (exactMatch.Count == 1)
{
report.MessageList.Add("One coordinate candidate found. Exact match");
report.passOrFail = true;
return report;
}
if (possibleMatch.Count > 1)
{
report.MessageList.Add("No exact solution for a match of the polyLoop coordinate. More than one coordinate candidate found.");
report.passOrFail = false;
return report;
}
else if (possibleMatch.Count == 1)
{
report.MessageList.Add("One coordinate candidate found.");
report.passOrFail = true;
return report;
}
else
{
report.MessageList.Add("No coordinate candidate found.");
report.passOrFail = false;
return report;
}
}
private static bool GetPolyLoopCoordMatch(Vector.MemorySafe_CartCoord standardPolyLoopCoord, SurfaceDefinitions testSurface, string standardSurfaceId, double testlengthConversion, double standardlengthConversion)
{
List<Vector.MemorySafe_CartCoord> possibleMatch = new List<Vector.MemorySafe_CartCoord>();
List<Vector.MemorySafe_CartCoord> exactMatch = new List<Vector.MemorySafe_CartCoord>();
logger.Debug("START SUBROUTINE: GetPolyLoopCoordMatch");
logger.Debug(standardSurfaceId +"Coordinates: "+" X: " + standardPolyLoopCoord.X.ToString() + ", Y: " + standardPolyLoopCoord.Y.ToString() + ", Z: " + standardPolyLoopCoord.Z.ToString());
foreach (Vector.MemorySafe_CartCoord testPolyLoopCoord in testSurface.PlCoords)
{
//find an appropriate match
double diffX = Math.Abs((testPolyLoopCoord.X * testlengthConversion) - (standardPolyLoopCoord.X * standardlengthConversion));
if (diffX < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//found a perfect X Match
if (diffX == 0)
{
//test Y
double diffY = Math.Abs((testPolyLoopCoord.Y * testlengthConversion) - (standardPolyLoopCoord.Y * standardlengthConversion));
if (diffY < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Y Match
if (diffY == 0)
{
double diffZ = Math.Abs((testPolyLoopCoord.Z * testlengthConversion) - (standardPolyLoopCoord.Z * standardlengthConversion));
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
logger.Debug("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " exactly");
logger.Debug("Test Surface " + testSurface.SurfaceId);
logger.Debug(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
exactMatch.Add(testPolyLoopCoord);
}
else
{
//not a perfect Z match but within bounds
logger.Debug("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " X and Y coordinates exactly. Z coordinate within allowable tolerance.");
logger.Debug("Test Surface " + testSurface.SurfaceId);
logger.Debug(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z coordinate not within tolerance
continue;
}
}
//Y Match is within the allowable tolerance
else
{
double diffZ = Math.Abs((testPolyLoopCoord.Z * testlengthConversion) - (standardPolyLoopCoord.Z * standardlengthConversion));
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
logger.Debug("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " in the X and Z coordinates, exactly. Y coordinate is within tolerance.");
logger.Debug("Test Surface " + testSurface.SurfaceId);
logger.Debug(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
logger.Debug("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " X exactly. Y and Z coordinates are within tolerance.");
logger.Debug("Test Surface " + testSurface.SurfaceId);
logger.Debug(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z coordinate is not within tolerance
continue;
}
}
}
else
{
//a y match could not be found within tolerance
continue;
}
}
else
{
//not a perfect X match, but within tolerance
//test Y
double diffY = Math.Abs((testPolyLoopCoord.Y * testlengthConversion) - (standardPolyLoopCoord.Y * standardlengthConversion));
if (diffY < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Y Match
if (diffY == 0)
{
double diffZ = Math.Abs((testPolyLoopCoord.Z * testlengthConversion) - (standardPolyLoopCoord.Z * standardlengthConversion));
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
logger.Info("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " Y and Z coordinate exactly. X is within tolerance.");
logger.Info("Test Surface " + testSurface.SurfaceId);
logger.Info(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
logger.Info("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " Y coordinate exactly. X and Z is within tolerance.");
logger.Info("Test Surface " + testSurface.SurfaceId);
logger.Info(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
else
{
//z is not matched so continue
continue;
}
}
// the Y match is not perfect but within tolerance
else
{
double diffZ = Math.Abs((testPolyLoopCoord.Z * testlengthConversion) - (standardPolyLoopCoord.Z * standardlengthConversion));
if (diffZ < DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance)
{
//perfect Z match
if (diffZ == 0)
{
logger.Info("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + " Z coordinate exactly. The X and Y coordinates are within tolerance.");
logger.Info("Test Surface " + testSurface.SurfaceId);
logger.Info(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
else
{
logger.Info("Test Surface " + testSurface.SurfaceId + ": Found polyLoop coordinate that matches Standard Surface " + standardSurfaceId + ". The X, Y, and Z coordinates are within tolerance.");
logger.Info("Test Surface " + testSurface.SurfaceId);
logger.Info(" X: " + testPolyLoopCoord.X.ToString() + ", Y: " + testPolyLoopCoord.Y.ToString() + ", Z: " + testPolyLoopCoord.Z.ToString());
possibleMatch.Add(testPolyLoopCoord);
}
}
// no match found for the Z
else
{
continue;
}
}
}
//no match could be found for the Y
else
{
continue;
}
}
}
else
{
//not a match found for the X and continue
continue;
}
}
if (exactMatch.Count > 1)
{
logger.Info("Error, overlapping polyLoop coordinates found in the Test Surface PolyLoop.");
return false;
}
else if (exactMatch.Count == 1)
{
logger.Info("One coordinate candidate found. Exact match");
return true;
}
if (possibleMatch.Count > 1)
{
logger.Info("No exact solution for a match of the polyLoop coordinate. More than one coordinate candidate found.");
return false;
}
else if (possibleMatch.Count == 1)
{
logger.Info("One coordinate candidate found.");
return true;
}
else
{
logger.Info("No coordinate candidate found.");
return false;
}
}
public bool EdgesShareVertex(Vector.MemorySafe_CartCoord vertex, DOEgbXMLBasics.EdgeFamily edge)
{
double lengthTol = DOEgbXMLBasics.Tolerances.SurfacePLCoordTolerance;
double dx = Math.Abs(vertex.X - edge.startendpt[0].X);
double dy = Math.Abs(vertex.Y - edge.startendpt[0].Y);
double dz = Math.Abs(vertex.Z - edge.startendpt[0].Z);
if(dx <= lengthTol && dy <= lengthTol && dz <= lengthTol)
{
return true;
}
dx = Math.Abs(vertex.X - edge.startendpt[1].X);
dy = Math.Abs(vertex.Y - edge.startendpt[1].Y);
dz = Math.Abs(vertex.Z - edge.startendpt[1].Z);
if(dx <= lengthTol && dy <= lengthTol && dz <= lengthTol)
{
return true;
}
return false;
}
public bool FoundVertexMatch(Vector.MemorySafe_CartCoord vertex, List<DOEgbXMLBasics.EdgeFamily> edges)
{
int vertexMatchCount = 0;
for(int e = 0; e < edges.Count(); e++)
{
if(EdgesShareVertex(vertex,edges[e]))
{
vertexMatchCount++;
}
}
if(vertexMatchCount == 1)
{
return true;
}
else
{
return false;
}
}
private static string MakeCoordString(Vector.MemorySafe_CartCoord coord)
{
return "(" + coord.X + "," + coord.Y + "," + coord.Z + ")";
}
public static CartesianPoint makegbCartesianPt(Vector.MemorySafe_CartCoord pt)
{
CartesianPoint cp = new CartesianPoint();
cp.Coordinate = new string[3];
cp.Coordinate[0] = gb.FormatDoubleToString(pt.X);
cp.Coordinate[1] = gb.FormatDoubleToString(pt.Y);
cp.Coordinate[2] = gb.FormatDoubleToString(pt.Z);
return cp;
}
//we have already proven that the neighboring edges are aligned with the edge
//so we do not perform an exhaustive vector search to find the answer. All we do instead is try and position them correctly
//in sequence as well as is possible.
//we do not check for overlaps until later
public static Vector.EdgeFamily[] AlignEdges(Vector.EdgeFamily[] alignededges, Vector.EdgeFamily edge, double tol)
{
try
{
List<double> magnitudes = new List<double>();
List<int> indices = new List<int>();
for (int i = 0; i < edge.relatedEdges.Count(); i++)
{
Vector.MemorySafe_CartCoord longstart = edge.startendpt[0];
Vector.MemorySafe_CartCoord longend = edge.startendpt[1];
Vector.MemorySafe_CartVect longv = Vector.CreateMemorySafe_Vector(longstart, longend);
double maglong = Vector.VectorMagnitude(longv);
Vector.EdgeFamily shortedge = edge.relatedEdges[i];
Vector.MemorySafe_CartCoord shortstart = shortedge.startendpt[0];
Vector.MemorySafe_CartCoord shortend = shortedge.startendpt[1];
Vector.MemorySafe_CartVect el1 = Vector.CreateMemorySafe_Vector(longstart, shortstart);
Vector.MemorySafe_CartVect el2 = Vector.CreateMemorySafe_Vector(longstart, shortend);
double magel1 = Vector.VectorMagnitude(el1);
double magel2 = Vector.VectorMagnitude(el2);
//put the greater of the two magnitudes in the list
if (magel1 > magel2)
{
shortedge.startendpt.Reverse();
if (magnitudes.Count >= 1)
{
bool added = false;
for (int m = 0; m < magnitudes.Count(); m++)
{
if (magel1 < magnitudes[m])
{
magnitudes.Insert(m, magel1);
indices.Insert(m, i);
added = true;
break;
}
}
if (!added)
{
magnitudes.Add(magel1);
indices.Add(i);
}
}
else
{
magnitudes.Add(magel1);
indices.Add(i);
}
}
else
{
if (magnitudes.Count >= 1)
{
bool added = false;
for (int m = 0; m < magnitudes.Count(); m++)
{
if (magel1 < magnitudes[m])
{
magnitudes.Insert(m, magel2);
indices.Insert(m, i);
added = true;
break;
}
}
if (!added)
{
magnitudes.Add(magel2);
indices.Add(i);
}
}
else
{
magnitudes.Add(magel2);
indices.Add(i);
}
}
}
int alignedcounter = 0;
foreach (int i in indices)
{
alignededges[alignedcounter] = edge.relatedEdges[i];
alignedcounter++;
}
return alignededges;
}
catch (Exception e)
{
}
return alignededges;
}
private static bool isCoordUnique(Dictionary<Vector.CartCoord, Tuple<List<string>, List<bool>>> clist, Vector.CartCoord coord)
{
foreach (Vector.CartCoord approvedcoord in clist.Keys)
{
//a text for tolerances?
if (approvedcoord.X == coord.X && approvedcoord.Y == coord.Y && approvedcoord.Z == coord.Z)
{
return false;
}
}
return true;
}
