/// <summary>
/// handles the correct merging of float values in the modules
/// </summary>
/// <param name="newModuleName"></param>
/// <param name="newModule"></param>
/// <param name="existingNewModule"></param>
/// <param name="ModuleAttribute"></param>
private void mergeModuleFloatValues(string newModuleName, ConfigNode newModule, ConfigNode existingNewModule, string ModuleAttribute)
{
Log.dbg("| {0} - {1} is float", newModuleName, ModuleAttribute);
//merge float values if they are allowed
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.nameSeparator, ModuleAttribute), UbioZurWeldingLtd.instance.config.unchangedModuleAttributes))
{
Log.dbg("| {0} - {1} is marked as unchangeable", newModuleName, ModuleAttribute);
}
else
{
if (newModule.HasValue(ModuleAttribute) || existingNewModule.HasValue(ModuleAttribute))
{
float newValue = float.TryParse(newModule.GetValue(ModuleAttribute), out newValue) == false?float.Parse(existingNewModule.GetValue(ModuleAttribute)) : float.Parse(newModule.GetValue(ModuleAttribute));
Log.dbg("| {0} - newValue - {1} = {2}", newModuleName, ModuleAttribute, newValue);
if (existingNewModule.HasValue(ModuleAttribute) && newModule.HasValue(ModuleAttribute))
{
float existingValue = float.Parse(existingNewModule.GetValue(ModuleAttribute));
Log.dbg("| {0} - existingValue - {1} = {2}", newModuleName, ModuleAttribute, existingValue);
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.nameSeparator, ModuleAttribute), UbioZurWeldingLtd.instance.config.maximizedModuleAttributes))
{
Log.dbg("| {0} - {1} - maximized", newModuleName, ModuleAttribute);
existingNewModule.SetValue(ModuleAttribute, (existingValue > newValue ? existingValue : newValue).ToString());
}
else
{
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.nameSeparator, ModuleAttribute), UbioZurWeldingLtd.instance.config.minimizedModuleAttributes))
{
Log.dbg("| {0} - {1} - minimized", newModuleName, ModuleAttribute);
existingNewModule.SetValue(ModuleAttribute, (existingValue < newValue ? existingValue : newValue).ToString());
}
else
{
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.nameSeparator, ModuleAttribute), UbioZurWeldingLtd.instance.config.averagedModuleAttributes) && (newValue != 0 && existingValue != 0))
{
Log.dbg("| {0} - {1} - averaged", newModuleName, ModuleAttribute);
existingNewModule.SetValue(ModuleAttribute, ((newValue + existingValue) * 0.5f).ToString());
}
else
{
Log.dbg("| {0} - {1} - added", newModuleName, ModuleAttribute);
existingNewModule.SetValue(ModuleAttribute, (newValue + existingValue).ToString());
}
}
}
}
else if (!existingNewModule.HasValue(ModuleAttribute) && newModule.HasValue(ModuleAttribute))
{
Log.dbg("| {0} - setNewValue - {1} = {2}", newModuleName, ModuleAttribute, newValue);
existingNewModule.AddValue(ModuleAttribute, newValue.ToString());
}
}
Log.dbg("| {0} - {1} is merged with value {2}", newModuleName, ModuleAttribute, float.Parse(existingNewModule.GetValue(ModuleAttribute)));
}
}
/// <summary>
/// loads configfile and prepares it with all needed lists
/// </summary>
/// <returns></returns>
public static WeldingConfiguration loadConfig()
{
WeldingConfiguration configuration = new WeldingConfiguration();
ModuleLists moduleList = new ModuleLists();
FileStream FileStream;
if (System.IO.File.Exists(_configFile))
{
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
configSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
configSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(_configFile, FileMode.Open);
configuration = (WeldingConfiguration)configSerializer.Deserialize(FileStream);
FileStream.Close();
if (configuration.MainWindowXPosition > (Screen.width - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowXPosition = Screen.width - Constants.guiScreenEdgeClearance;
}
if (configuration.MainWindowYPosition > (Screen.height - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowYPosition = Screen.height - Constants.guiScreenEdgeClearance;
}
FileStream.Close();
}
if (System.IO.File.Exists(_moduleListFile))
{
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
moduleListSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
moduleListSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(_moduleListFile, FileMode.Open);
moduleList = (ModuleLists)moduleListSerializer.Deserialize(FileStream);
FileStream.Close();
configuration.vector2CurveModules = WeldingHelpers.convertFromToStringArray(moduleList.vector2CurveModules);
configuration.vector4CurveModules = WeldingHelpers.convertFromToStringArray(moduleList.vector4CurveModules);
configuration.subModules = WeldingHelpers.convertFromToStringArray(moduleList.subModules);
configuration.modulesToIgnore = WeldingHelpers.convertFromToStringArray(moduleList.modulesToIgnore);
configuration.averagedModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.averagedModuleAttributes);
configuration.unchangedModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.unchangedModuleAttributes);
configuration.breakingModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.breakingModuleAttributes);
FileStream.Close();
}
else
{
configuration.vector2CurveModules = Constants.basicVector2CurveModules;
configuration.vector4CurveModules = Constants.basicVector4CurveModules;
configuration.subModules = Constants.basicSubModules;
configuration.modulesToIgnore = Constants.basicModulesToIgnore;
configuration.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
configuration.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
configuration.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
}
Debug.Log(string.Format("{0} Config was loaded", Constants.logPrefix));
return(configuration);
}
/// <summary>
/// handles the correct merging of float values in the modules
/// </summary>
/// <param name="newModuleName"></param>
/// <param name="newModule"></param>
/// <param name="existingNewModule"></param>
/// <param name="ModuleAttribute"></param>
private void mergeModuleFloatValues(string newModuleName, ConfigNode newModule, ConfigNode existingNewModule, string ModuleAttribute, bool advancedDebugging)
{
#if (DEBUG)
//Debug.LogWarning(string.Format("{0}| {1} - {2} is float", Constants.logPrefix, newModuleName, ModuleAttribute));
#endif
//merge float values if they are allowed
if (!WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.underline, ModuleAttribute), UbioZurWeldingLtd.instance.config.unchangedModuleAttributes))
{
if (newModule.HasValue(ModuleAttribute) || existingNewModule.HasValue(ModuleAttribute))
{
float newValue = float.TryParse(newModule.GetValue(ModuleAttribute), out newValue) == false?float.Parse(existingNewModule.GetValue(ModuleAttribute)) : float.Parse(newModule.GetValue(ModuleAttribute));
Debugger.AdvDebug(string.Format("| {0} - newValue - {1} = {2}", newModuleName, ModuleAttribute, newValue), advancedDebugging);
if (existingNewModule.HasValue(ModuleAttribute) && newModule.HasValue(ModuleAttribute))
{
float existingValue = float.Parse(existingNewModule.GetValue(ModuleAttribute));
Debugger.AdvDebug(string.Format("| {0} - existingValue - {1} = {2}", newModuleName, ModuleAttribute, existingValue), advancedDebugging);
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.underline, ModuleAttribute), UbioZurWeldingLtd.instance.config.maximizedModuleAttributes))
{
Debugger.AdvDebug(string.Format("| {0} - {1} - maximized", newModuleName, ModuleAttribute), advancedDebugging);
existingNewModule.SetValue(ModuleAttribute, (existingValue > newValue ? existingValue : newValue).ToString());
}
else
{
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.underline, ModuleAttribute), UbioZurWeldingLtd.instance.config.minimizedModuleAttributes))
{
Debugger.AdvDebug(string.Format("| {0} - {1} - minimized", newModuleName, ModuleAttribute), advancedDebugging);
existingNewModule.SetValue(ModuleAttribute, (existingValue < newValue ? existingValue : newValue).ToString());
}
else
{
if (WeldingHelpers.isArrayContaining(string.Concat(newModuleName, Constants.underline, ModuleAttribute), UbioZurWeldingLtd.instance.config.averagedModuleAttributes) && (newValue != 0 && existingValue != 0))
{
Debugger.AdvDebug(string.Format("| {0} - {1} - averaged", newModuleName, ModuleAttribute), advancedDebugging);
existingNewModule.SetValue(ModuleAttribute, ((newValue + existingValue) * 0.5f).ToString());
}
else
{
Debugger.AdvDebug(string.Format("| {0} - {1} - added", newModuleName, ModuleAttribute), advancedDebugging);
existingNewModule.SetValue(ModuleAttribute, (newValue + existingValue).ToString());
}
}
}
}
else if (!existingNewModule.HasValue(ModuleAttribute) && newModule.HasValue(ModuleAttribute))
{
Debugger.AdvDebug(string.Format("| {0} - setNewValue - {1} = {2}", newModuleName, ModuleAttribute, newValue), advancedDebugging);
existingNewModule.AddValue(ModuleAttribute, newValue.ToString());
}
}
}
Debugger.AdvDebug(string.Format("| {0} - {1} is merged with value {2}", newModuleName, ModuleAttribute, float.Parse(existingNewModule.GetValue(ModuleAttribute))), advancedDebugging);
}
private static void saveConfig(WeldingConfiguration configToSave, String configFullPathName, String moduleFullPathName)
{
WeldingConfiguration configuration = (WeldingConfiguration)configToSave.clone();
ModuleLists moduleList = new ModuleLists();
TextWriter fileStreamWriter;
if (configuration == null)
{
configuration = new WeldingConfiguration();
}
configuration.vector2CurveModules = null;
configuration.vector4CurveModules = null;
configuration.subModules = null;
configuration.modulesToIgnore = null;
configuration.modulesToMultiply = null;
configuration.maximizedModuleAttributes = null;
configuration.minimizedModuleAttributes = null;
configuration.averagedModuleAttributes = null;
configuration.unchangedModuleAttributes = null;
configuration.breakingModuleAttributes = null;
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
fileStreamWriter = new StreamWriter(configFullPathName);
configSerializer.Serialize(fileStreamWriter, configuration);
fileStreamWriter.Close();
//ModuleList from the constants or the actual config, depending on length of the array, in case user did add some entries
moduleList.vector2CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector2CurveModules != null && (configToSave.vector2CurveModules.Length > Constants.basicVector2CurveModules.Length) ? configToSave.vector2CurveModules : Constants.basicVector2CurveModules);
moduleList.vector4CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector4CurveModules != null && (configToSave.vector4CurveModules.Length > Constants.basicVector4CurveModules.Length) ? configToSave.vector4CurveModules : Constants.basicVector4CurveModules);
moduleList.subModules = WeldingHelpers.convertStringFromToArray(configToSave.subModules != null && (configToSave.subModules.Length > Constants.basicSubModules.Length) ? configToSave.subModules : Constants.basicSubModules);
moduleList.modulesToIgnore = WeldingHelpers.convertStringFromToArray(configToSave.modulesToIgnore != null && (configToSave.modulesToIgnore.Length > Constants.basicModulesToIgnore.Length) ? configToSave.modulesToIgnore : Constants.basicModulesToIgnore);
moduleList.modulesToMultiply = WeldingHelpers.convertStringFromToArray(configToSave.modulesToMultiply != null && (configToSave.modulesToMultiply.Length > Constants.basicModulesToMultiply.Length) ? configToSave.modulesToMultiply : Constants.basicModulesToMultiply);
moduleList.maximizedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.maximizedModuleAttributes != null && (configToSave.maximizedModuleAttributes.Length > Constants.basicMaximizedModuleAttributes.Length) ? configToSave.maximizedModuleAttributes : Constants.basicMaximizedModuleAttributes);
moduleList.minimizedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.minimizedModuleAttributes != null && (configToSave.minimizedModuleAttributes.Length > Constants.basicMinimizedModuleAttributes.Length) ? configToSave.minimizedModuleAttributes : Constants.basicMinimizedModuleAttributes);
moduleList.averagedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.averagedModuleAttributes != null && (configToSave.averagedModuleAttributes.Length > Constants.basicAveragedModuleAttributes.Length) ? configToSave.averagedModuleAttributes : Constants.basicAveragedModuleAttributes);
moduleList.unchangedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.unchangedModuleAttributes != null && (configToSave.unchangedModuleAttributes.Length > Constants.basicUnchangedModuleAttributes.Length) ? configToSave.unchangedModuleAttributes : Constants.basicUnchangedModuleAttributes);
moduleList.breakingModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.breakingModuleAttributes != null && (configToSave.breakingModuleAttributes.Length > Constants.basicBreakingModuleAttributes.Length) ? configToSave.breakingModuleAttributes : Constants.basicBreakingModuleAttributes);
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
fileStreamWriter = new StreamWriter(moduleFullPathName);
moduleListSerializer.Serialize(fileStreamWriter, moduleList);
fileStreamWriter.WriteLine("");
foreach (string s in comments)
{
fileStreamWriter.WriteLine(s);
}
fileStreamWriter.Close();
Log.dbg("Config was saved");
}
/// <summary>
/// saves the config file and the modulelist file so that it is possible to change them without the need to recompile
/// </summary>
/// <param name="configToSave"></param>
public static void saveConfig(WeldingConfiguration configToSave)
{
WeldingConfiguration configuration = (WeldingConfiguration)configToSave.clone();
ModuleLists moduleList = new ModuleLists();
TextWriter fileStreamWriter;
if (configuration == null)
{
configuration = new WeldingConfiguration();
}
configuration.vector2CurveModules = null;
configuration.vector4CurveModules = null;
configuration.subModules = null;
configuration.modulesToIgnore = null;
configuration.averagedModuleAttributes = null;
configuration.unchangedModuleAttributes = null;
configuration.breakingModuleAttributes = null;
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
fileStreamWriter = new StreamWriter(_configFile);
configSerializer.Serialize(fileStreamWriter, configuration);
fileStreamWriter.Close();
//ModuleList from the constants or the actual config, depending on length of the array, in case user did add some entries
moduleList.vector2CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector2CurveModules.Length > Constants.basicVector2CurveModules.Length ? configToSave.vector2CurveModules : Constants.basicVector2CurveModules);
moduleList.vector4CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector4CurveModules.Length > Constants.basicVector4CurveModules.Length ? configToSave.vector4CurveModules: Constants.basicVector4CurveModules);
moduleList.subModules = WeldingHelpers.convertStringFromToArray(configToSave.subModules.Length > Constants.basicSubModules.Length ?configToSave.subModules: Constants.basicSubModules);
moduleList.modulesToIgnore = WeldingHelpers.convertStringFromToArray(configToSave.modulesToIgnore.Length > Constants.basicModulesToIgnore.Length ? configToSave.modulesToIgnore : Constants.basicModulesToIgnore);
moduleList.averagedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.averagedModuleAttributes.Length > Constants.basicAveragedModuleAttributes.Length ? configToSave.averagedModuleAttributes:Constants.basicAveragedModuleAttributes);
moduleList.unchangedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.unchangedModuleAttributes.Length > Constants.basicUnchangedModuleAttributes.Length ? configToSave.unchangedModuleAttributes: Constants.basicUnchangedModuleAttributes);
moduleList.breakingModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.breakingModuleAttributes.Length > Constants.basicBreakingModuleAttributes.Length ? configToSave.breakingModuleAttributes : Constants.basicBreakingModuleAttributes);
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
fileStreamWriter = new StreamWriter(_moduleListFile);
moduleListSerializer.Serialize(fileStreamWriter, moduleList);
fileStreamWriter.WriteLine("");
foreach (string s in comments)
{
fileStreamWriter.WriteLine(s);
}
fileStreamWriter.Close();
Debug.Log(string.Format("{0} Config was saved", Constants.logPrefix));
}
private void HandleAwake()
{
instance = this;
Log.dbg("Platform is {0}", Application.platform);
initConfig();
this.state = DisplayState.none;
_editorErrorDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorWarningDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorInfoWindow = new Rect(Screen.width / 2 - Constants.guiInfoWindowX, Screen.height / 2 - Constants.guiInfoWindowY, Constants.guiInfoWindowW, Constants.guiInfoWindowH);
_editorOverwriteDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorSavedDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorMainWindow = new Rect(_config.MainWindowXPosition, _config.MainWindowYPosition, Constants.guiMainWindowW, Constants.guiMainWindowH);
_catNames = WeldingHelpers.initPartCategories(_catNames);
_guiStyle = WeldingHelpers.initGuiStyle(_guiStyle);
_catDropdown = WeldingHelpers.initDropDown(_catNames, _guiStyle, _catDropdown);
DatabaseHandler.initMMAssembly();
}
/*
* Called when plug in loaded
*/
public void Awake()
{
instance = this;
Debug.Log(string.Format("{0}- {1} => Awake", Constants.logPrefix, instance.GetType()));
Debug.Log(string.Format("{0} Platform is {1}", Constants.logPrefix, Application.platform));
initConfig();
_state = DisplayState.none;
_editorErrorDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorWarningDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorInfoWindow = new Rect(Screen.width / 2 - Constants.guiInfoWindowX, Screen.height / 2 - Constants.guiInfoWindowY, Constants.guiInfoWindowW, Constants.guiInfoWindowH);
_editorOverwriteDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorSavedDial = new Rect(Screen.width / 2 - Constants.guiDialogX, Screen.height / 2 - Constants.guiDialogY, Constants.guiDialogW, Constants.guiDialogH);
_editorMainWindow = new Rect(_config.MainWindowXPosition, _config.MainWindowYPosition, Constants.guiMainWindowW, Constants.guiMainWindowH);
_catNames = WeldingHelpers.initPartCategories(_catNames);
_guiStyle = WeldingHelpers.initGuiStyle(_guiStyle);
_catDropdown = WeldingHelpers.initDropDown(_catNames, _guiStyle, _catDropdown);
DatabaseHandler.initMMAssembly();
}
/// <summary>
/// loads configfile and prepares it with all needed lists
/// </summary>
/// <returns></returns>
public static WeldingConfiguration loadConfig()
{
WeldingConfiguration configuration = new WeldingConfiguration();
ModuleLists moduleList = new ModuleLists();
FileStream FileStream = null;
try {
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
configSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
configSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(CONFIG_FULLPATHNAME, FileMode.Open);
configuration = (WeldingConfiguration)configSerializer.Deserialize(FileStream);
if (configuration.MainWindowXPosition > (Screen.width - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowXPosition = Screen.width - Constants.guiScreenEdgeClearance;
}
if (configuration.MainWindowYPosition > (Screen.height - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowYPosition = Screen.height - Constants.guiScreenEdgeClearance;
}
} catch (Exception e) {
configuration = new WeldingConfiguration();
Log.warn(String.Format("{0} : {1}", CONFIG_FULLPATHNAME, e.Message));
} finally {
if (null != FileStream)
{
FileStream.Close();
}
FileStream = null;
}
try {
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
moduleListSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
moduleListSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(MODULELIST_FULLPATHNAME, FileMode.Open);
moduleList = (ModuleLists)moduleListSerializer.Deserialize(FileStream);
configuration.vector2CurveModules = moduleList.vector2CurveModules != null?WeldingHelpers.convertFromToStringArray(moduleList.vector2CurveModules) : new string[0];
configuration.vector4CurveModules = moduleList.vector4CurveModules != null?WeldingHelpers.convertFromToStringArray(moduleList.vector4CurveModules) : new string[0];
configuration.subModules = moduleList.subModules != null?WeldingHelpers.convertFromToStringArray(moduleList.subModules) : new string[0];
configuration.modulesToIgnore = moduleList.modulesToIgnore != null?WeldingHelpers.convertFromToStringArray(moduleList.modulesToIgnore) : new string[0];
configuration.modulesToMultiply = moduleList.modulesToMultiply != null?WeldingHelpers.convertFromToStringArray(moduleList.modulesToMultiply) : new string[0];
configuration.maximizedModuleAttributes = moduleList.maximizedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.maximizedModuleAttributes) : new string[0];
configuration.minimizedModuleAttributes = moduleList.minimizedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.minimizedModuleAttributes) : new string[0];
configuration.averagedModuleAttributes = moduleList.averagedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.averagedModuleAttributes) : new string[0];
configuration.unchangedModuleAttributes = moduleList.unchangedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.unchangedModuleAttributes) : new string[0];
configuration.breakingModuleAttributes = moduleList.breakingModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.breakingModuleAttributes) : new string[0];
} catch (Exception e) {
configuration.vector2CurveModules = Constants.basicVector2CurveModules;
configuration.vector4CurveModules = Constants.basicVector4CurveModules;
configuration.subModules = Constants.basicSubModules;
configuration.modulesToIgnore = Constants.basicModulesToIgnore;
configuration.modulesToMultiply = Constants.basicModulesToMultiply;
configuration.maximizedModuleAttributes = Constants.basicMaximizedModuleAttributes;
configuration.minimizedModuleAttributes = Constants.basicMinimizedModuleAttributes;
configuration.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
configuration.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
configuration.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
Log.warn(String.Format("{0} : {1}", CONFIG_FULLPATHNAME, e.Message));
} finally {
if (null != FileStream)
{
FileStream.Close();
}
FileStream = null;
}
Log.dbg("Config was loaded");
return(configuration);
}
/// <summary>
/// manages the merging of submodules inside the module
/// </summary>
/// <param name="newModule"></param>
/// <param name="existingNewModule"></param>
private void mergeSubModules(ConfigNode newModule, ConfigNode existingNewModule)
{
bool exist = false;
string newSubModuleName = "";
Log.dbg("| Merging SubModules Start");
foreach (string subModule in UbioZurWeldingLtd.instance.config.subModules)
{
ConfigNode[] newNodes = newModule.GetNodes(subModule);
ConfigNode[] existingNodes = existingNewModule.GetNodes(subModule);
foreach (ConfigNode newNode in newNodes)
{
newSubModuleName = newNode.GetValue(newNode.values.DistinctNames()[0]);
foreach (ConfigNode existingNode in existingNodes)
{
exist = false;
string[] breakingAttributes = new string[newNode.values.DistinctNames().Count()];
for (int i = 0; i < newNode.values.DistinctNames().Count(); i++)
{
breakingAttributes[i] = string.Concat(subModule, Constants.nameSeparator, newNode.values.DistinctNames()[i]);
}
breakingAttributes = WeldingHelpers.getSharedArrayValues(breakingAttributes, UbioZurWeldingLtd.instance.config.breakingModuleAttributes);
Log.dbg("| SubModule BreakingAttributes found = {0} ", breakingAttributes.Length);
if (breakingAttributes.Length > 0)
{
foreach (string s in breakingAttributes)
{
string breakingAttribute = s.Replace(string.Concat(subModule, Constants.nameSeparator), "");
var existingValue = existingNode.GetValue(breakingAttribute);
var newValue = newNode.GetValue(breakingAttribute);
Log.dbg("| SubModule BreakingAttributes found | current one is {0} | ExistingValue = {1} - NewValue = {2}", breakingAttribute, existingValue, newValue);
exist = Equals(existingValue, newValue);
if (!exist)
{
break;
}
}
if (exist)
{
mergeContents(newSubModuleName, newNode, existingNode);
exist = true;
break;
}
}
else
{
mergeContents(newSubModuleName, newNode, existingNode);
exist = true;
break;
}
}
if (!exist)
{
if (!WeldingHelpers.isArrayContaining(newSubModuleName, UbioZurWeldingLtd.instance.config.modulesToIgnore))
{
existingNewModule.AddNode(newNode);
}
}
}
}
Log.dbg("| Merging SubModules End");
}
/// <summary>
/// merges the modules in a almost generic way.
/// </summary>
/// <param name="partname"></param>
/// <param name="configuration"></param>
public void mergeModules(string partname, UrlDir.UrlConfig configuration, List <ConfigNode> modulelist)
{
ConfigNode[] originalModules = configuration.config.GetNodes(Constants.weldModuleNode);
string newModuleName = "";
bool exist = false;
ConfigNode newModule;
foreach (ConfigNode originalModule in originalModules)
{
newModule = originalModule.CreateCopy();
newModuleName = newModule.GetValue(newModule.values.DistinctNames()[0]);
exist = false;
foreach (ConfigNode existingNewModule in modulelist)
{
if (newModuleName.Equals(existingNewModule.GetValue(existingNewModule.values.DistinctNames()[0])))
{
if (!WeldingHelpers.isArrayContaining(newModuleName, UbioZurWeldingLtd.instance.config.modulesToMultiply))
{
Log.dbg("| {0} Module already exists!!!", existingNewModule.GetValue(existingNewModule.values.DistinctNames()[0]));
if (newModule.values.DistinctNames().Length < 2)
{
// making shure that the MODULE gets not duplicated in case it has no attributes
exist = true;
break;
}
else
{
string[] breakingAttributes = new string[newModule.values.DistinctNames().Count()];
for (int i = 0; i < newModule.values.DistinctNames().Count(); i++)
{
breakingAttributes[i] = string.Concat(newModuleName, Constants.nameSeparator, newModule.values.DistinctNames()[i]);
}
breakingAttributes = WeldingHelpers.getSharedArrayValues(breakingAttributes, UbioZurWeldingLtd.instance.config.breakingModuleAttributes);
Log.dbg("| BreakingAttributes found = {0} ", breakingAttributes.Length);
if (breakingAttributes.Length > 0)
{
foreach (string s in breakingAttributes)
{
string breakingAttribute = s.Replace(string.Concat(newModuleName, Constants.nameSeparator), "");
var existingValue = existingNewModule.GetValue(breakingAttribute);
var newValue = newModule.GetValue(breakingAttribute);
Log.dbg("| BreakingAttributes found | current one is {0} | ExistingValue = {1} - NewValue = {2}", breakingAttribute, existingValue, newValue);
exist = Equals(existingValue, newValue);
if (!exist)
{
break;
}
}
if (exist)
{
mergeContents(newModuleName, newModule, existingNewModule);
exist = true;
break;
}
}
else
{
mergeContents(newModuleName, newModule, existingNewModule);
exist = true;
break;
}
}
}
}
Log.dbg("| Module {1} ready to add = {0}", !exist, existingNewModule.GetValue("name"));
} //foreach (ConfigNode existingNewModule in _modulelist)
if (!(exist || WeldingHelpers.isArrayContaining(newModuleName, UbioZurWeldingLtd.instance.config.modulesToIgnore)))
{
addNewModule(partname, newModuleName, newModule, modulelist);
}
} //foreach (ConfigNode mod in modules)
}
} //private void OnDraw()
private void weldPart(Part partToWeld)
{
//Lock editor
EditorLockManager.lockEditor(Constants.settingWeldingLock);
//process the welding
#if (DEBUG)
Debug.ClearDeveloperConsole();
Log.info("{0}", Constants.logVersion);
Log.info("{0}", Constants.logStartWeld);
#endif
bool warning = false;
_welder = new Welder();
_welder.init();
partToWeld.transform.eulerAngles = Vector3.zero;
WeldingReturn ret = 0;
if (!WeldingHelpers.DoesTextContainRegex(partToWeld.name, "strutConnector"))
{
ret = _welder.weldThisPart(partToWeld);
}
if (ret < 0)
{
Log.dbg("{0}", Constants.logEndWeld);
this.state = DisplayState.weldError;
return;
}
else
{
warning = warning || (0 < ret);
}
Part[] children = partToWeld.FindChildParts <Part>(true);
if (children != null)
{
foreach (Part child in children)
{
if (!WeldingHelpers.DoesTextContainRegex(child.name, "strutConnector"))
{
ret = _welder.weldThisPart(child);
}
if (ret < 0)
{
Log.dbg("{0}", Constants.logEndWeld);
this.state = DisplayState.weldError;
return;
}
else
{
warning = warning || (0 < ret);
}
}
}
_welder.processNewCoM();
_welder.prepDecals(_welder.moduleList);
if (_welder.isMeshSwitchRequired)
{
_welder.prepareWeldedMeshSwitchModule(_welder.moduleList);
}
_techDropdown = WeldingHelpers.initTechDropDown(_welder.techList, _guiStyle, _techDropdown);
if (_welder.vesselTypeList.Count > 0)
{
_vesselTypeDropdown = WeldingHelpers.initVesselTypeDropDown(_welder.vesselTypeList, _guiStyle, _vesselTypeDropdown);
}
_scrollMod = Vector2.zero;
_scrollRes = Vector2.zero;
Log.dbg("| {0} Parts welded", _welder.NbParts);
if (warning)
{
Log.dbg(Constants.logEndWeld);
this.state = DisplayState.weldWarning;
}
else
{
Log.dbg("welder.Category: {0}", (int)_welder.Category);
_catDropdown.SelectedItemIndex = (int)_welder.Category;
this.state = DisplayState.infoWindow;
}
}
} //private void OnDraw()
private void weldPart(Part partToWeld)
{
//Lock editor
EditorLogic.fetch.Lock(true, true, true, Constants.settingWeldingLock);
//process the welding
#if (DEBUG)
Debug.ClearDeveloperConsole();
Debug.Log(string.Format("{0}{1}", Constants.logPrefix, Constants.logVersion));
Debug.Log(string.Format("{0}{1}", Constants.logPrefix, Constants.logStartWeld));
#endif
bool warning = false;
_welder = new Welder();
partToWeld.transform.eulerAngles = Vector3.up;
WeldingReturn ret = _welder.weldThisPart(partToWeld);
if (ret < 0)
{
#if (DEBUG)
Debug.Log(string.Format("{0}{1}", Constants.logPrefix, Constants.logEndWeld));
#endif
_state = DisplayState.weldError;
return;
}
else
{
warning = warning || (0 < ret);
}
Part[] children = partToWeld.FindChildParts <Part>(true);
if (children != null)
{
foreach (Part child in children)
{
ret = _welder.weldThisPart(child);
if (ret < 0)
{
#if (DEBUG)
Debug.Log(string.Format("{0}{1}", Constants.logPrefix, Constants.logEndWeld));
#endif
_state = DisplayState.weldError;
return;
}
else
{
warning = warning || (0 < ret);
}
}
}
_welder.processNewCoM();
_techDropdown = WeldingHelpers.initTechDropDown(_welder.techList, _catListStyle, _techDropdown);
_scrollMod = Vector2.zero;
_scrollRes = Vector2.zero;
#if (DEBUG)
Debug.Log(string.Format("{0} {1} | {2} Parts welded", Constants.logPrefix, Constants.logEndWeld, _welder.NbParts));
#endif
if (warning)
{
Debug.Log(string.Format("{0} {1} | Warning", Constants.logPrefix, Constants.logEndWeld));
_state = DisplayState.weldWarning;
}
else
{
_catDropdown.SelectedItemIndex = (int)_welder.Category;
_state = DisplayState.infoWindow;
}
}