public bool IsReplaceAtX = false; // if true, we try to find a plotted point with same x-value and replace with this one.
// otherwise, we just add the new point serially.
//
//
//
public ZGraphPoint DeepCopy()
{
ZGraphPoint zpt = (ZGraphPoint)this.MemberwiseClone();
return(zpt);
}
}// InitializeEngine()
//
//
// **** Process Event ****
//
public void ProcessEvent(EventArgs e)
{
// Initialize and validate
if (!m_IsGraphsInitialized)
{ // Graphs not initialized yet. Just store these events.
m_InitialEvents.Add(e);
return;
}
else if (m_InitialEvents.Count > 0)
{ // The graphs have just been initialized, so
// lets extract all the previously stored initial events.
List <EventArgs> events = new List <EventArgs>();
events.AddRange(m_InitialEvents); // add already acrued events.
m_InitialEvents.Clear(); // clearing this signals we are ready for normal operation.
events.Add(e); // add the latest event also.
foreach (EventArgs anEvent in events)
{
ProcessEvent(anEvent);
}
}
if (e.GetType() != typeof(EngineEventArgs))
{
return;
}
//
// Process Engine Events
//
EngineEventArgs eArgs = (EngineEventArgs)e;
EngineEventArgs.EventType eventType = eArgs.MsgType;
EngineEventArgs.EventStatus eventStatus = eArgs.Status;
if (eventStatus != EngineEventArgs.EventStatus.Confirm)
{
return; // we only process confirmations.
}
if (eArgs.DataObjectList != null)
{
foreach (object o in eArgs.DataObjectList)
{
// *****************************************
// **** Curve Definitiion List ****
// *****************************************
Type dataType = o.GetType();
//if (dataType == typeof(List<CurveDefinition>))
if (dataType == typeof(CurveDefinitionList))
{ // Given a list of curve definitions, update pre-defined curves,
// or create new curves. These must be created by the windows thread.
// These are usually only received at the start of the run when all parameters are broadcasted.
List <CurveDefinition> list = ((CurveDefinitionList)o).CurveDefinitions;
Dictionary <int, EngineEventArgs> requestedGraphRequests = new Dictionary <int, EngineEventArgs>(); // place to put CurveDefs for not yet created graphs.
foreach (CurveDefinition cDef in list)
{
ZedGraphControl zg1;
lock (GraphListLock)
{
if (!m_GraphList.TryGetValue(cDef.GraphID, out zg1))
{ // Since we can't find this GraphID, request it to be created below.
m_ZedGraphIDRequested.Add(cDef.GraphID);
zg1 = null; // this signals that graph doesn't exit.
}
}
if (zg1 == null && !requestedGraphRequests.ContainsKey(cDef.GraphID))
{ // We couldn't find GraphID, so request it to be created it now!
// Also make sure we only request it once thru this loop, just to save time.
AddGraph(this, eArgs); // Asynch call will call ProcessEvent() again.
EngineEventArgs newEvent = new EngineEventArgs(); // Event we will restack until after graph exists.
newEvent.DataObjectList = new List <object>();
newEvent.Status = EngineEventArgs.EventStatus.Confirm;
requestedGraphRequests.Add(cDef.GraphID, newEvent);// Mark this ID as having just been requested.
}
if (requestedGraphRequests.ContainsKey(cDef.GraphID))
{ // This is a curve for a graph we just requested... push onto wait list.
requestedGraphRequests[cDef.GraphID].DataObjectList.Add(cDef);
continue; // skip
}
UpdateCurveDefinition(zg1, cDef);
}//next curveDefn
// Push any unfulfilled requests back onto queue.
foreach (EngineEventArgs eeArgs in requestedGraphRequests.Values)
{
m_InitialEvents.Add(eeArgs);
}
}
// *****************************************
// **** ZGraphPoints ****
// *****************************************
else if (dataType == typeof(ZGraphPoints))
{ // This is a list of ZGraphPoint objects. This message is from the AllParameter broadcast
// at the beginning of the run. A new ZGraphControl will request all parameter values
// only when first created. Therefore, if we are an old ZGraphControl, it probably is not
// for us.
if (m_LoadedHistory)
{
return;
}
m_LoadedHistory = true;
List <ZGraphPoint> pointList = ((ZGraphPoints)o).Points;
foreach (ZGraphPoint zpt in pointList)
{
ZedGraphControl zg1;
if (!m_GraphList.TryGetValue(zpt.GraphID, out zg1))
{ // No currently existing graph with this id.
continue;
}
CurveItem curve = null;
if (zg1.GraphPane != null)
{
curve = zg1.GraphPane.CurveList[zpt.CurveName];
if (curve == null)
{ // a new curve showed up - create a new curve, and plot this point anyway.
Color newColor = m_DefaultColors[zg1.GraphPane.CurveList.Count % m_DefaultColors.Length];
curve = zg1.GraphPane.AddCurve(zpt.CurveName, new PointPairList(), newColor, SymbolType.None);
}
}
// Add/replace points in the plot.
IPointListEdit ip = null;
if (curve != null)
{
ip = curve.Points as IPointListEdit;
}
if (ip != null)
{
if (zpt.IsReplaceAtX)
{ // This is a request to replace point with new one.
int foundIndex = -1;
for (int i = 0; i < ip.Count; ++i) // search for X-value of point to replace
{
if (ip[i].X == zpt.X) // very unsafe
{
foundIndex = i;
break; // stop looking
}
}
if (foundIndex > -1)
{
ip[foundIndex].Y = zpt.Y;
}
else
{
ip.Add(zpt.X, zpt.Y);
// sort?
}
}
else
{
ip.Add(zpt.X, zpt.Y); // simple serial addition of new data point.
}
}
}//next zpt
}
// *****************************************
// **** List<ZGraphPoint> ****
// *****************************************
/*
* else if (dataType == typeof(List<ZGraphPoint>))
* { // This is a list of ZGraphPoints. This message is from the AllParameter broadcast
* // at the beginning of the run. A new ZGraphControl will request all parameter values
* // only when first created. Therefore, if we are an old ZGraphControl, it probably is not
* // for us.
* List<ZGraphPoint> pointList = (List<ZGraphPoint>) o;
* foreach (ZGraphPoint zpt in pointList)
* {
* ZedGraphControl zg1;
* if (!m_GraphList.TryGetValue(zpt.GraphID, out zg1))
* { // No currently existing graph with this id.
* continue;
* }
* CurveItem curve = null;
* if (zg1.GraphPane != null)
* {
* curve = zg1.GraphPane.CurveList[zpt.CurveName];
* if (curve == null)
* { // a new curve showed up - create a new curve, and plot this point anyway.
* Color newColor = m_DefaultColors[zg1.GraphPane.CurveList.Count % m_DefaultColors.Length];
* curve = zg1.GraphPane.AddCurve(zpt.CurveName, new PointPairList(), newColor, SymbolType.None);
* }
* }
* // Add/replace points in the plot.
* IPointListEdit ip = null;
* if (curve != null)
* ip = curve.Points as IPointListEdit;
* if (ip != null)
* {
* if (zpt.IsReplaceAtX)
* { // This is a request to replace point with new one.
* int foundIndex = -1;
* for (int i = 0; i < ip.Count; ++i) // search for X-value of point to replace
* if (ip[i].X == zpt.X) // very unsafe
* {
* foundIndex = i;
* break; // stop looking
* }
* if (foundIndex > -1)
* ip[foundIndex].Y = zpt.Y;
* else
* {
* ip.Add(zpt.X, zpt.Y);
* // sort?
* }
*
* }
* else
* ip.Add(zpt.X, zpt.Y); // simple serial addition of new data point.
* }
* }//next zpt
* }
*/
// *****************************************
// **** Curve Definition ****
// *****************************************
else if (dataType == typeof(CurveDefinition))
{
CurveDefinition zNewCurve = (CurveDefinition)o;
ZedGraphControl zg1;
if (!m_GraphList.TryGetValue(zNewCurve.GraphID, out zg1))
{ // New graph ID!
continue; // TODO: Create new graph on the fly.
}
UpdateCurveDefinition(zg1, zNewCurve);
}
// *****************************************
// **** ZGraphPoint ****
// *****************************************
else if (dataType == typeof(ZGraphText))
{
ZGraphText zpt = (ZGraphText)o;
ZedGraphControl zg1;
if (!m_GraphList.TryGetValue(zpt.GraphID, out zg1))
{ // No currently existing graph with this id.
continue;
}
TextObj text = new TextObj(zpt.Text, zpt.X, zpt.Y);
text.FontSpec.Angle = zpt.FontAngle;
text.Location.AlignH = zpt.FontAlignH;
text.Location.AlignV = zpt.FontAlignV;
text.FontSpec.Size = zpt.FontSize;
text.FontSpec.Border.IsVisible = zpt.FontBorderIsVisible;
text.FontSpec.Fill.IsVisible = zpt.FontFillIsVisible;
zg1.GraphPane.GraphObjList.Add(text);
}
// *****************************************
// **** ZGraphPoint ****
// *****************************************
else if (dataType == typeof(ZGraphPoint))
{
ZGraphPoint zpt = (ZGraphPoint)o;
ZedGraphControl zg1;
if (!m_GraphList.TryGetValue(zpt.GraphID, out zg1))
{ // No currently existing graph with this id.
continue;
}
CurveItem curve = null;
if (zg1.GraphPane != null)
{
curve = zg1.GraphPane.CurveList[zpt.CurveName];
if (curve == null)
{ // a new curve showed up - create a new curve, and plot this point anyway.
Color newColor = m_DefaultColors[zg1.GraphPane.CurveList.Count % m_DefaultColors.Length];
curve = zg1.GraphPane.AddCurve(zpt.CurveName, new PointPairList(), newColor, SymbolType.None);
}
}
// Add/replace points in the plot.
IPointListEdit ip = null;
if (curve != null)
{
ip = curve.Points as IPointListEdit;
}
if (ip != null)
{
if (zpt.IsReplaceAtX)
{ // This is a request to replace point with new one.
int foundIndex = -1;
for (int i = 0; i < ip.Count; ++i) // search for X-value of point to replace
{
if (ip[i].X == zpt.X) // very unsafe
{
foundIndex = i;
break; // stop looking
}
}
if (foundIndex > -1)
{
ip[foundIndex].Y = zpt.Y;
}
else
{
ip.Add(zpt.X, zpt.Y);
// sort?
}
}
else
{
ip.Add(zpt.X, zpt.Y); // simple serial addition of new data point.
}
}
}// ZPoint
}
m_IsUpdateRequired = true;
//Regenerate(this, EventArgs.Empty);
} //if e.DataObjectList is empty
} // ProcessEvent()
