protected override void InvokeStepSingleTime(bool forceInvoke)
{
// 重置计时时间
Actuator.ResetTiming();
// 调用前置监听
OnPreListener();
this.Result = StepResult.NotAvailable;
this.Result = Actuator.InvokeStep(forceInvoke);
// 如果当前step被标记为记录状态，则返回状态信息
if (null != StepData && StepData.RecordStatus)
{
RecordRuntimeStatus();
}
// 调用后置监听
OnPostListener();
if (null != StepData && StepData.HasSubSteps)
{
StepTaskEntityBase subStepEntity = SubStepRoot;
do
{
if (!forceInvoke && Context.Cancellation.IsCancellationRequested)
{
this.Result = StepResult.Abort;
return;
}
subStepEntity.Invoke(forceInvoke);
} while (null != (subStepEntity = subStepEntity.NextStep));
}
}
public StepTaskEntityBase GetStepEntity(ICallStack stack)
{
// 当前当前StepRoot为null，则说明序列已经执行结束，返回null
if (null == _stepEntityRoot)
{
return(null);
}
StepTaskEntityBase currentStep = _stepEntityRoot;
int currentLevel = 0;
int stepId = stack.StepStack[currentLevel];
for (int i = 0; i < stepId; i++)
{
currentStep = currentStep.NextStep;
}
currentLevel++;
while (currentLevel < stack.StepStack.Count && null != currentStep.SubStepRoot)
{
currentStep = currentStep.SubStepRoot;
stepId = stack.StepStack[currentLevel];
for (int i = 0; i < stepId; i++)
{
currentStep = currentStep.NextStep;
}
currentLevel++;
}
return(currentStep);
}
protected override void InvokeStepSingleTime(bool forceInvoke)
{
// 重置计时
Actuator.ResetTiming();
// 调用前置监听
OnPreListener();
// 开始计时
Actuator.StartTiming();
// 停止计时
Actuator.EndTiming();
// 应为TryFinally块上级为空，默认为pass
this.Result = StepResult.Pass;
// 调用后置监听
OnPostListener();
StepTaskEntityBase tryBlock = SubStepRoot;
StepTaskEntityBase finallyBlock = tryBlock.NextStep;
try
{
tryBlock.Invoke(forceInvoke);
}
finally
{
// finally模块是强制调用
finallyBlock.Invoke(true);
}
if (null != StepData && StepData.RecordStatus)
{
RecordRuntimeStatus();
}
}
private void SetResultState(out StepResult lastStepResult, out StatusReportType finalReportType,
out FailedInfo failedInfo)
{
StepTaskEntityBase lastStep = StepTaskEntityBase.GetCurrentStep(this.Index, RootCoroutineId);
lastStepResult = lastStep.Result;
failedInfo = null;
this.State = ModuleUtils.GetSequenceState(this._stepEntityRoot);
switch (this.State)
{
case RuntimeState.Over:
case RuntimeState.Success:
finalReportType = StatusReportType.Over;
break;
case RuntimeState.Failed:
finalReportType = StatusReportType.Failed;
break;
case RuntimeState.Timeout:
case RuntimeState.Error:
finalReportType = StatusReportType.Error;
break;
case RuntimeState.Abort:
finalReportType = StatusReportType.Error;
failedInfo = new FailedInfo("Sequence aborted", FailedType.Abort);
_context.LogSession.Print(LogLevel.Warn, Index, $"Sequence {Index} execution aborted");
break;
default:
finalReportType = StatusReportType.Over;
break;
}
}
public static void AddSequenceEntrance(StepTaskEntityBase stepModel)
{
if (!CurrentModel.ContainsKey(stepModel.SequenceIndex))
{
CurrentModel.Add(stepModel.SequenceIndex,
new Dictionary <int, StepTaskEntityBase>(Constants.DefaultRuntimeSize));
}
CurrentModel[stepModel.SequenceIndex].Add(stepModel.Coroutine.Id, stepModel);
}
public void FillStatusInfo(StatusMessage message, string errorInfo)
{
// 如果是外部调用且该序列已经执行结束或者message中已经有了当前序列的信息，则说明该序列在前面的消息中已经标记结束，直接返回。
if (message.InterestedSequence.Contains(this.Index) || this.State > RuntimeState.AbortRequested)
{
return;
}
message.Stacks.Add(StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId).GetStack());
message.SequenceStates.Add(this.State);
message.Results.Add(StepResult.NotAvailable);
}
public void FillStatusInfo(StatusMessage message)
{
// 如果是外部调用且该序列已经执行结束或者未开始或者message中已经有了当前序列的信息，则说明该序列在前面的消息中已经标记结束，直接返回。
if (message.InterestedSequence.Contains(this.Index) || this.State > RuntimeState.AbortRequested || this.State == RuntimeState.StartIdle)
{
return;
}
message.SequenceStates.Add(this.State);
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep.FillStatusInfo(message);
}
protected StepTaskEntityBase(ISequenceStep step, SlaveContext context, int sequenceIndex)
{
this.Context = context;
this.StepData = step;
this.Result = StepResult.NotAvailable;
this.SequenceIndex = sequenceIndex;
this.Actuator = ActuatorBase.GetActuator(step, context, sequenceIndex);
this.Coroutine = null;
// 只有在断言失败和调用异常都配置为终止执行时，该步骤才会被判断为失败后终止
if (null != StepData && StepData.HasSubSteps)
{
this.SubStepRoot = ModuleUtils.CreateSubStepModelChain(StepData.SubSteps, Context, sequenceIndex);
}
BreakIfFailed = (null == StepData) || (StepData.AssertFailedAction == FailedAction.Terminate &&
StepData.InvokeErrorAction == FailedAction.Terminate);
}
public virtual void Generate(ref int coroutineId)
{
this.Coroutine = Context.CoroutineManager.GetCoroutineHandle(coroutineId);
Actuator.Generate(coroutineId);
// 只有在StepData的LoopCounter不为null，loop最大值大于1，并且Step类型不是ConditionLoop的情况下才会执行LoopCounter
this._hasLoopCounter = (StepData?.LoopCounter != null && StepData.LoopCounter.MaxValue > 1 &&
StepData.StepType != SequenceStepType.ConditionLoop);
this._isUnderRetryStep = IsUnderRetryBlock();
if (StepData?.HasSubSteps ?? false)
{
StepTaskEntityBase subStepEntity = SubStepRoot;
do
{
subStepEntity.Generate(ref coroutineId);
} while (null != (subStepEntity = subStepEntity.NextStep));
}
InintializeInvokeAction();
}
public void Generate(int startCoroutineId)
{
this.RootCoroutineId = startCoroutineId;
this.State = RuntimeState.TestGen;
_stepEntityRoot = ModuleUtils.CreateStepModelChain(_sequence.Steps, _context, _sequence.Index);
if (null == _stepEntityRoot)
{
return;
}
StepTaskEntityBase stepEntity = _stepEntityRoot;
do
{
stepEntity.Generate(ref startCoroutineId);
} while (null != (stepEntity = stepEntity.NextStep));
this.State = RuntimeState.StartIdle;
// 添加当前根节点到stepModel管理中
StepTaskEntityBase.AddSequenceEntrance(_stepEntityRoot);
}
protected override void InvokeStepSingleTime(bool forceInvoke)
{
// 重置计时时间
Actuator.ResetTiming();
// 调用前置监听
OnPreListener();
this.Result = StepResult.NotAvailable;
this.Result = Actuator.InvokeStep(forceInvoke);
// 如果当前step被标记为记录状态，则返回状态信息
if (null != StepData && StepData.RecordStatus)
{
RecordRuntimeStatus();
}
// 调用后置监听
OnPostListener();
object returnValue = Actuator.Return;
// 如果执行结果不是bool类型或者为False，或者没有下级节点，则退出当前循环
bool conditionFail = !(returnValue is bool) || !(bool)returnValue;
if (conditionFail || null == StepData || !StepData.HasSubSteps)
{
return;
}
// 执行下级的所有Step
StepTaskEntityBase subStepEntity = SubStepRoot;
do
{
if (!forceInvoke && Context.Cancellation.IsCancellationRequested)
{
this.Result = StepResult.Abort;
return;
}
subStepEntity.Invoke(forceInvoke);
} while (null != (subStepEntity = subStepEntity.NextStep));
}
// protected override void CheckSequenceData()
// {
// if (null != StepData.Function)
// {
// Context.LogSession.Print(LogLevel.Error, Context.SessionId,
// $"Conditionblock cannot configure function data. Step:{StepData.Name}");
// I18N i18N = I18N.GetInstance(Constants.I18nName);
// throw new TestflowDataException(ModuleErrorCode.SequenceDataError, i18N.GetStr("ConditionBlockHasFunc"));
//
// }
// if (null != StepData.SubSteps &&
// StepData.SubSteps.Any(item => item.StepType != SequenceStepType.ConditionStatement))
// {
// Context.LogSession.Print(LogLevel.Error, Context.SessionId,
// $"Some steps under condition block is not ConditionStatement type. Step:{GetStack()}");
// I18N i18N = I18N.GetInstance(Constants.I18nName);
// throw new TestflowDataException(ModuleErrorCode.SequenceDataError, i18N.GetStr("IllegalStepType"));
// }
// }
protected override void InvokeStepSingleTime(bool forceInvoke)
{
// 重置计时时间
Actuator.ResetTiming();
// 调用前置监听
OnPreListener();
// 开始计时
Actuator.StartTiming();
// 停止计时
Actuator.EndTiming();
this.Result = StepResult.Pass;
// 如果当前step被标记为记录状态，则返回状态信息
if (null != StepData && StepData.RecordStatus)
{
RecordRuntimeStatus();
}
// 调用后置监听
OnPostListener();
if (null != StepData && StepData.HasSubSteps)
{
StepTaskEntityBase subStepEntity = SubStepRoot;
do
{
subStepEntity.Invoke(forceInvoke);
object returnValue = subStepEntity.Return;
// 如果ConditionStatement返回值为True则说明该分支已执行完成，则跳过后续的Step
if (returnValue is bool && (bool)returnValue)
{
break;
}
} while (null != (subStepEntity = subStepEntity.NextStep));
}
}
protected override void InvokeStepSingleTime(bool forceInvoke)
{
int index = 0;
while (true)
{
try
{
while (true)
{
// 设置循环变量的值
if (null != _loopVariable)
{
Context.VariableMapper.SetParamValue(_loopVariable, StepData.LoopCounter.CounterVariable,
index++);
}
// 如果是取消状态并且不是强制执行则返回。因为ConditionLoop内部有循环，所以需要在内部也做判断
if (!forceInvoke && Context.Cancellation.IsCancellationRequested)
{
BreakAndReportAbortMessage();
}
// 重置计时时间
Actuator.ResetTiming();
// 调用前置监听
OnPreListener();
this.Result = StepResult.NotAvailable;
this.Result = Actuator.InvokeStep(forceInvoke);
// 如果当前step被标记为记录状态，则返回状态信息
if (null != StepData && StepData.RecordStatus)
{
RecordRuntimeStatus();
}
// 调用后置监听
OnPostListener();
// 如果执行结果不是bool类型或者为False，或者没有下级节点，则退出当前循环
object returnValue = Actuator.Return;
bool conditionFail = !(returnValue is bool) || !(bool)returnValue;
if (conditionFail || null == StepData || !StepData.HasSubSteps)
{
return;
}
// 执行所有的下级Step
StepTaskEntityBase subStepEntity = SubStepRoot;
do
{
if (!forceInvoke && Context.Cancellation.IsCancellationRequested)
{
this.Result = StepResult.Abort;
return;
}
subStepEntity.Invoke(forceInvoke);
} while (null != (subStepEntity = subStepEntity.NextStep));
}
}
catch (TestflowLoopBreakException ex)
{
ex.CalcDown();
// 如果计数大于0，则继续抛出到上层
if (ex.Count > 0)
{
throw;
}
// 如果是跳出当前循环，则return
if (ex.BreakLoop)
{
return;
}
}
}
}
public void Invoke(bool forceInvoke = false)
{
FailedInfo failedInfo = null;
StepResult lastStepResult = StepResult.NotAvailable;
StatusReportType finalReportType = StatusReportType.Failed;
try
{
this.State = RuntimeState.Running;
SequenceStatusInfo startStatusInfo = new SequenceStatusInfo(Index, _stepEntityRoot.GetStack(),
StatusReportType.Start, RuntimeState.Running, StepResult.NotAvailable)
{
ExecutionTime = DateTime.Now,
ExecutionTicks = -1,
CoroutineId = RootCoroutineId
};
_context.StatusQueue.Enqueue(startStatusInfo);
StepTaskEntityBase stepEntity = _stepEntityRoot;
do
{
stepEntity.Invoke(forceInvoke);
} while (null != (stepEntity = stepEntity.NextStep));
SetResultState(out lastStepResult, out finalReportType, out failedInfo);
}
catch (TaskFailedException ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
FillFinalExceptionReportInfo(ex, out finalReportType, out lastStepResult, out failedInfo);
// 如果抛出TargetInvokcationException到当前位置则说明内部没有发送错误事件
if (null != currentStep && currentStep.Result == StepResult.NotAvailable)
{
currentStep.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
}
catch (TestflowAssertException ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
FillFinalExceptionReportInfo(ex, out finalReportType, out lastStepResult, out failedInfo);
// 如果抛出TargetInvokcationException到当前位置则说明内部没有发送错误事件
if (null != currentStep && currentStep.Result == StepResult.NotAvailable)
{
currentStep.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
}
catch (ThreadAbortException ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
FillFinalExceptionReportInfo(ex, out finalReportType, out lastStepResult, out failedInfo);
// Abort异常不会在内部处理，需要在外部强制抛出
currentStep?.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
catch (TargetInvocationException ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
FillFinalExceptionReportInfo(ex.InnerException, out finalReportType, out lastStepResult, out failedInfo);
// 如果抛出TargetInvokcationException到当前位置则说明内部没有发送错误事件
if (null != currentStep && currentStep.Result == StepResult.NotAvailable)
{
currentStep.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
}
catch (TestflowLoopBreakException ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
// 如果包含内部异常，则说明发生了运行时错误，记录错误信息。
if (null != ex.InnerException)
{
FillFinalExceptionReportInfo(ex.InnerException, out finalReportType, out lastStepResult,
out failedInfo);
// 如果抛出TargetInvokcationException到当前位置则说明内部没有发送错误事件
if (null != currentStep && currentStep.BreakIfFailed)
{
currentStep.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
}
// 只是流程控制，记录结果信息后退出
else
{
SetResultState(out lastStepResult, out finalReportType, out failedInfo);
}
}
catch (Exception ex)
{
// 停止失败的step的计时
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
currentStep?.EndTiming();
FillFinalExceptionReportInfo(ex, out finalReportType, out lastStepResult, out failedInfo);
// 如果抛出Exception到当前位置则说明内部没有发送错误事件
if (null != currentStep && currentStep.BreakIfFailed)
{
currentStep.SetStatusAndSendErrorEvent(lastStepResult, failedInfo);
}
}
finally
{
StepTaskEntityBase currentStep = StepTaskEntityBase.GetCurrentStep(Index, RootCoroutineId);
// 发送结束事件，包括所有的ReturnData信息
SequenceStatusInfo overStatusInfo = new SequenceStatusInfo(Index, currentStep.GetStack(),
finalReportType, this.State, StepResult.Over, failedInfo)
{
ExecutionTime = DateTime.Now,
CoroutineId = RootCoroutineId,
ExecutionTicks = 0
};
overStatusInfo.WatchDatas = _context.VariableMapper.GetReturnDataValues(_sequence);
this._context.StatusQueue.Enqueue(overStatusInfo);
_context.VariableMapper.ClearSequenceVariables(_sequence);
this._stepEntityRoot = null;
// 将失败步骤职责链以后的step标记为null
currentStep.NextStep = null;
}
}