public List <LineSegment> new_get_lower_edge(Part Gpart)
{
List <LineSegment> lineSegmentList = new List <LineSegment>();
Point point1 = new Point();
Point point2 = new Point();
Point point3 = new Point();
Point point4 = new Point();
Point point5 = new Point();
Tekla.Structures.Model.Solid solid = Gpart.GetSolid(Tekla.Structures.Model.Solid.SolidCreationTypeEnum.PLANECUTTED);
EdgeEnumerator edgeEnumerator = solid.GetEdgeEnumerator();
Point maximumPoint = solid.MaximumPoint;
Point minimumPoint = solid.MinimumPoint;
TransformationPlane transformationPlane = this.myModel.GetWorkPlaneHandler().GetCurrentTransformationPlane();
Point point6 = transformationPlane.TransformationMatrixToGlobal.Transform(maximumPoint);
Point point7 = transformationPlane.TransformationMatrixToGlobal.Transform(minimumPoint);
if (point6.Z > point7.Z)
{
point3 = minimumPoint;
}
else if (point6.Z < point7.Z)
{
point3 = maximumPoint;
}
if (solid != null)
{
while (edgeEnumerator.MoveNext())
{
Edge current = edgeEnumerator.Current as Edge;
if (current.StartPoint.Z - current.EndPoint.Z == 0.0 && current.StartPoint.Z == point3.Z)
{
LineSegment lineSegment = new LineSegment(current.StartPoint, current.EndPoint);
lineSegmentList.Add(lineSegment);
}
}
}
return(lineSegmentList);
}
public OBB CreateObb(Part currentBeam)
{
OBB obb = (OBB)null;
if (currentBeam != null)
{
WorkPlaneHandler workPlaneHandler = this.myModel.GetWorkPlaneHandler();
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
Tekla.Structures.Model.Solid solid1 = currentBeam.GetSolid();
Point center = this.CallulateCenterPoint(solid1.MaximumPoint, solid1.MinimumPoint);
CoordinateSystem coordinateSystem = currentBeam.GetCoordinateSystem();
workPlaneHandler.SetCurrentTransformationPlane(new TransformationPlane(coordinateSystem));
Tekla.Structures.Model.Solid solid2 = currentBeam.GetSolid();
Point maximumPoint = solid2.MaximumPoint;
Point minimumPoint = solid2.MinimumPoint;
double extent0 = (maximumPoint.X - minimumPoint.X) / 2.0;
double extent1 = (maximumPoint.Y - minimumPoint.Y) / 2.0;
double extent2 = (maximumPoint.Z - minimumPoint.Z) / 2.0;
obb = new OBB(center, coordinateSystem.AxisX, coordinateSystem.AxisY, coordinateSystem.AxisX.Cross(coordinateSystem.AxisY), extent0, extent1, extent2);
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
}
return(obb);
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
TSM.Model model = new TSM.Model();
TSD.DrawingHandler drawingHandler = new TSD.DrawingHandler();
TSG.Vector UpDirection = new TSG.Vector(0.0, 0.0, 1.0);
TSD.Size A3 = new TSD.Size(410, 287);
TSM.TransformationPlane current = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TSM.TransformationPlane());
TSM.ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.Part)
{
TSM.Part selectedPart = (TSM.Part)modelObjectEnum.Current;
string USER_FIELD_3 = "", USER_FIELD_4 = "";
selectedPart.GetUserProperty("USER_FIELD_3", ref USER_FIELD_3);
selectedPart.GetUserProperty("USER_FIELD_4", ref USER_FIELD_4);
USER_FIELD_4 = USER_FIELD_4.Replace("(?)", "");
selectedPart.SetUserProperty("USER_FIELD_4", USER_FIELD_4);
if (USER_FIELD_3 == "M")
{
TSD.Drawing gaDrawing = new TSD.GADrawing("BRAD-Mod-Ass", A3);
gaDrawing.Name = selectedPart.Name;
gaDrawing.Title1 = "SITEWORK";
gaDrawing.Title2 = USER_FIELD_3 + USER_FIELD_4;
gaDrawing.Title3 = "";
gaDrawing.Insert();
drawingHandler.SetActiveDrawing(gaDrawing, false);
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new Tekla.Structures.Model.TransformationPlane(selectedPart.GetCoordinateSystem()));
TSM.Solid tsolid = selectedPart.GetSolid();
TSG.Point tsMinPt = tsolid.MinimumPoint;
TSG.Point tsMaxPt = tsolid.MaximumPoint;
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new Tekla.Structures.Model.TransformationPlane());
if (selectedPart.Name.Contains("BEAM"))
{
TSG.CoordinateSystem ModelObjectCoordSys = selectedPart.GetCoordinateSystem();
TSG.CoordinateSystem PlanViewCoordSys = new TSG.CoordinateSystem();
PlanViewCoordSys.Origin = new TSG.Point(ModelObjectCoordSys.Origin);
PlanViewCoordSys.AxisX = new TSG.Vector(ModelObjectCoordSys.AxisX) * -1.0;
PlanViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY);
TSG.Vector tempVector = (PlanViewCoordSys.AxisX.Cross(UpDirection));
if (tempVector == new TSG.Vector())
{
tempVector = (ModelObjectCoordSys.AxisY.Cross(UpDirection));
}
PlanViewCoordSys.AxisX = tempVector.Cross(UpDirection);
PlanViewCoordSys.AxisY = tempVector;
TSM.Solid solid = selectedPart.GetSolid();
TSG.AABB aabbPlanView = new TSG.AABB();
aabbPlanView.MinPoint = new TSG.Point(-50, tsMinPt.Z - 50, tsMinPt.Y - 50);
aabbPlanView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Z + 50, tsMaxPt.Y + 50);
TSD.View PlanView = new TSD.View(gaDrawing.GetSheet(), PlanViewCoordSys, PlanViewCoordSys, aabbPlanView, "BRAD-Mod-Ass");
PlanView.Name = "TOP";
PlanView.Scale = 10;
PlanView.Attributes.Shortening.CutParts = true;
PlanView.Attributes.Shortening.MinimumLength = 1200;
PlanView.Attributes.Shortening.Offset = 0.5;
PlanView.Insert();
PlanView.Attributes.FixedViewPlacing = true;
PlanView.Origin = new TSG.Point(100, 200);
PlanView.Modify();
TSG.CoordinateSystem FrontViewCoordSys = (TSG.CoordinateSystem)PlanViewCoordSys;
FrontViewCoordSys.AxisX = tempVector.Cross(UpDirection).GetNormal();
FrontViewCoordSys.AxisY = UpDirection.GetNormal();
TSG.AABB aabbFrontView = new TSG.AABB();
aabbFrontView.MinPoint = new TSG.Point(-50, tsMinPt.Y - 50, tsMinPt.Z - 50);
aabbFrontView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Y + 50, tsMaxPt.Z + 50);
TSD.View FrontView = new TSD.View(gaDrawing.GetSheet(), FrontViewCoordSys, FrontViewCoordSys, aabbFrontView, "BRAD-Mod-Ass");
FrontView.Name = "FRONT";
FrontView.Scale = 10;
FrontView.Attributes.Shortening.CutParts = true;
FrontView.Attributes.Shortening.MinimumLength = 1200;
FrontView.Attributes.Shortening.Offset = 0.5;
FrontView.Insert();
FrontView.Attributes.FixedViewPlacing = true;
FrontView.Origin = new TSG.Point(100, (200 - FrontView.Height - 2));
FrontView.Modify();
}
if (selectedPart.Name.Contains("COLUMN"))
{
TSG.CoordinateSystem ModelObjectCoordSys = selectedPart.GetCoordinateSystem();
TSG.CoordinateSystem PlanViewCoordSys = new TSG.CoordinateSystem();
PlanViewCoordSys.Origin = new TSG.Point(ModelObjectCoordSys.Origin);
PlanViewCoordSys.AxisX = new TSG.Vector(ModelObjectCoordSys.AxisX);
PlanViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY);
TSG.Vector tempVector = (PlanViewCoordSys.AxisX.Cross(UpDirection));
if (tempVector == new TSG.Vector())
{
tempVector = (ModelObjectCoordSys.AxisY.Cross(UpDirection));
}
TSG.AABB aabbPlanView = new TSG.AABB();
aabbPlanView.MinPoint = new TSG.Point(-50, tsMinPt.Y - 50, tsMinPt.Z - 50);
aabbPlanView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Y + 50, tsMaxPt.Z + 50);
TSD.View PlanView = new TSD.View(gaDrawing.GetSheet(), PlanViewCoordSys, PlanViewCoordSys, aabbPlanView, "BRAD-Mod-Ass");
PlanView.Name = "TOP";
PlanView.Scale = 10;
PlanView.Attributes.Shortening.CutParts = true;
PlanView.Attributes.Shortening.MinimumLength = 1200;
PlanView.Attributes.Shortening.Offset = 0.5;
PlanView.Origin = new TSG.Point(100, 200);
PlanView.Insert();
PlanView.Attributes.FixedViewPlacing = true;
PlanView.Modify();
TSG.CoordinateSystem FrontViewCoordSys = (TSG.CoordinateSystem)PlanViewCoordSys;
FrontViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY).Cross(UpDirection) * -1;
TSG.AABB aabbFrontView = new TSG.AABB();
aabbFrontView.MinPoint = new TSG.Point(-50, tsMinPt.Z - 50, tsMinPt.Y - 50);
aabbFrontView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Z + 50, tsMaxPt.Y + 50);
TSD.View FrontView = new TSD.View(gaDrawing.GetSheet(), FrontViewCoordSys, FrontViewCoordSys, aabbFrontView, "BRAD-Mod-Ass");
FrontView.Name = "FRONT";
FrontView.Scale = 10;
FrontView.Attributes.Shortening.CutParts = true;
FrontView.Attributes.Shortening.MinimumLength = 1200;
FrontView.Attributes.Shortening.Offset = 0.5;
FrontView.Origin = new TSG.Point(100, (200 - FrontView.Height - 30));
FrontView.Insert();
FrontView.Attributes.FixedViewPlacing = true;
FrontView.Modify();
}
drawingHandler.CloseActiveDrawing(true);
}
}
}
MessageBox.Show("Drawings Created");
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(current);
}
catch { }
}
public List <LineSegment> Get_Lower_face_edge(Part GPart)
{
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
Tekla.Structures.Model.Solid solid = GPart.GetSolid();
EdgeEnumerator edgeEnumerator = solid.GetEdgeEnumerator();
List <LineSegment> lineSegmentList = new List <LineSegment>();
if (solid != null)
{
while (edgeEnumerator.MoveNext())
{
Edge current = edgeEnumerator.Current as Edge;
LineSegment lineSegment = new LineSegment(current.StartPoint, current.EndPoint);
if (Math.Abs(lineSegment.Point1.Z - lineSegment.Point2.Z) < 1.0)
{
lineSegmentList.Add(lineSegment);
}
}
for (int index1 = 0; index1 < lineSegmentList.Count; ++index1)
{
LineSegment lineSegment1 = lineSegmentList[index1];
for (int index2 = 0; index2 < lineSegmentList.Count; ++index2)
{
LineSegment lineSegment2 = lineSegmentList[index2];
if (Math.Abs(lineSegment1.Point1.X - lineSegment2.Point1.X) < 1.0 && Math.Abs(lineSegment1.Point1.Y - lineSegment2.Point1.Y) < 1.0 && lineSegment1.Point1.Z != lineSegment2.Point1.Z)
{
if (lineSegment2.Point1.Z > lineSegment1.Point1.Z)
{
lineSegmentList.Remove(lineSegment2);
}
else
{
lineSegmentList.Remove(lineSegment1);
}
}
}
}
for (int index1 = 0; index1 < lineSegmentList.Count; ++index1)
{
LineSegment lineSegment1 = lineSegmentList[index1];
for (int index2 = 0; index2 < lineSegmentList.Count; ++index2)
{
LineSegment lineSegment2 = lineSegmentList[index2];
Point point1 = lineSegment2.Point1;
LineSegment lineSegment3 = new LineSegment(lineSegment2.Point2, point1);
if (Math.Abs(lineSegment1.Point1.X - lineSegment3.Point1.X) < 1.0 && Math.Abs(lineSegment1.Point1.Y - lineSegment3.Point1.Y) < 1.0 && lineSegment1.Point1.Z != lineSegment3.Point1.Z)
{
if (lineSegment3.Point1.Z > lineSegment1.Point1.Z)
{
lineSegmentList.Remove(lineSegment2);
}
else
{
lineSegmentList.Remove(lineSegment1);
}
}
}
}
}
return(lineSegmentList);
}
public void createconnection(Part main, ArrayList secondries)
{
foreach (Identifier secondry in secondries)
{
Part part1 = main;
Part part2 = (Part)this.myModel.SelectModelObject(secondry);
List <Beam> beamList = new List <Beam>();
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane(part1.GetCoordinateSystem()));
Tekla.Structures.Model.Solid solid1 = part1.GetSolid();
Point maximumPoint = solid1.MaximumPoint;
Point minimumPoint = solid1.MinimumPoint;
Tekla.Structures.Model.Solid solid2 = part2.GetSolid();
double num = 0.0;
Type type = part1.GetType();
if (type.Name == "Beam")
{
num = solid2.MaximumPoint.X;
}
else if (type.Name == "ContourPlate")
{
num = solid2.MaximumPoint.Y;
}
Assembly assembly = part2.GetAssembly();
assembly.SetMainPart(part2);
ArrayList secondaries = assembly.GetSecondaries();
Point point1 = new Point();
Point point2 = new Point();
Point point3 = new Point();
Point point4 = new Point();
if (type.Name == "Beam")
{
point1 = new Point(num, maximumPoint.Y + this.data.positive_Y + this.data.Plate_h, maximumPoint.Z + this.data.negative_X + this.data.Plate_h);
point2 = new Point(num, maximumPoint.Y + this.data.positive_Y + this.data.Plate_h, minimumPoint.Z + this.data.positive_X * -1.0 - this.data.Plate_h);
point3 = new Point(num, minimumPoint.Y + this.data.negative_Y * -1.0 - this.data.Plate_h, minimumPoint.Z + this.data.positive_X * -1.0 - this.data.Plate_h);
point4 = new Point(num, minimumPoint.Y + this.data.negative_Y * -1.0 - this.data.Plate_h, maximumPoint.Z + this.data.negative_X + this.data.Plate_h);
}
else if (type.Name == "ContourPlate")
{
point1 = new Point(maximumPoint.X + this.data.positive_Y + this.data.Plate_h, num, maximumPoint.Z + this.data.negative_X + this.data.Plate_h);
point2 = new Point(maximumPoint.X + this.data.positive_Y + this.data.Plate_h, num, minimumPoint.Z + this.data.positive_X * -1.0 - this.data.Plate_h);
point3 = new Point(minimumPoint.X + this.data.negative_Y * -1.0 - this.data.Plate_h, num, minimumPoint.Z + this.data.positive_X * -1.0 - this.data.Plate_h);
point4 = new Point(minimumPoint.X + this.data.negative_Y * -1.0 - this.data.Plate_h, num, maximumPoint.Z + this.data.negative_X + this.data.Plate_h);
}
for (int index = 0; index < secondaries.Count; ++index)
{
if (secondaries[index].GetType().Name == "PolyBeam")
{
secondaries.RemoveAt(secondaries.IndexOf(secondaries[index]));
if (index >= 0)
{
--index;
continue;
}
if (secondaries.Count == 0)
{
break;
}
}
Part Part_To_Be_Cut = (Part)secondaries[index];
if (Part_To_Be_Cut.Class != "211")
{
this.CreateCut(point1, point2, point3, point4, Part_To_Be_Cut).Delete();
}
}
ContourPlate cut = this.CreateCut(point1, point2, point3, point4, part2);
OBB obb1 = new OBB();
OBB obb2 = this.CreateObb((Part)cut);
foreach (LineSegment lineSegment in this.Get_Lower_face_edge(part2))
{
if (obb2.Intersects(lineSegment))
{
try
{
LineSegment obb3 = Intersection.LineSegmentToObb(lineSegment, obb2);
Beam beam = this.insert_toeplate(obb3.Point1, obb3.Point2);
this.insert_weld(part2, (Part)beam);
beamList.Add(beam);
}
catch (Exception)
{
}
}
}
cut.Delete();
for (int index = 0; index < beamList.Count; ++index)
{
try
{
this.part_cut((Part)beamList[index], (Part)beamList[index + 1]);
}
catch (Exception)
{
}
}
try
{
this.part_cut((Part)beamList[beamList.Count - 1], (Part)beamList[0]);
}
catch (Exception)
{
}
for (int index = 0; index < secondaries.Count; ++index)
{
if (secondaries[index] is Beam beam && beam.Class == "211")
{
secondaries.Remove((object)beam);
index = -1;
}
}
foreach (Part GPart in secondaries)
{
foreach (LineSegment lineSegment in this.Get_Lower_face_edge(GPart))
{
if (obb2.Intersects(lineSegment))
{
try
{
LineSegment obb3 = Intersection.LineSegmentToObb(lineSegment, obb2);
Beam beam = this.insert_toeplate(obb3.Point1, obb3.Point2);
beamList.Add(beam);
}
catch (Exception)
{
}
}
}
}
for (int index1 = 0; index1 <= beamList.Count - 1; ++index1)
{
Beam beam1 = beamList[index1];
for (int index2 = index1 + 1; index2 <= beamList.Count - 1; ++index2)
{
Beam beam2 = beamList[index2];
this.combine_beams_have_same_vector((Part)beam1, (Part)beam2);
}
}
}
}
public override bool Run(List <InputDefinition> Input)
{
try
{
GetvaluesFormDialog();
var identifien1 = (Identifier)Input[0].GetInput();
var identifien2 = (Identifier)Input[1].GetInput();
var object1 = new tsm.Model().SelectModelObject(identifien1) as tsm.ModelObject;
var object2 = new tsm.Model().SelectModelObject(identifien2) as tsm.ModelObject;
//-------------------------------------------------------------------------
tsm.RebarGroup rebargroup0 = null;
tsm.RebarGroup rebargroup1 = null;
while (rebargroup0 == null & rebargroup1 == null)
{
try
{
tsm.ModelObject obj0 = object1;
if (obj0 as tsm.RebarGroup != null)
{
rebargroup0 = obj0 as tsm.RebarGroup;
r0 = Double.Parse(rebargroup0.Size);
sol0 = rebargroup0.GetSolid();
maxx0 = sol0.MaximumPoint.X;
maxy0 = sol0.MaximumPoint.Y;
maxz0 = sol0.MaximumPoint.Z;
minx0 = sol0.MinimumPoint.X;
miny0 = sol0.MinimumPoint.Y;
minz0 = sol0.MinimumPoint.Z;
}
tsm.ModelObject obj1 = object2;
if (obj1 as tsm.RebarGroup != null)
{
rebargroup1 = obj1 as tsm.RebarGroup;
r1 = Double.Parse(rebargroup1.Size);
onplan0 = Double.Parse(rebargroup1.OnPlaneOffsets[0].ToString());
sol1 = rebargroup1.GetSolid();
maxx1 = sol1.MaximumPoint.X;
maxy1 = sol1.MaximumPoint.Y;
maxz1 = sol1.MaximumPoint.Z;
minx1 = sol1.MinimumPoint.X;
miny1 = sol1.MinimumPoint.Y;
minz1 = sol1.MinimumPoint.Z;
}
if (r0 >= r1)
{
r = r1;
}
else
{
r = r0;
}
if (_Combo_Spacing == "Auto")
{
if (r == 12 || r == 14)
{
_Spacing = r + 2;
}
else if (r == 8 || r == 10 || r > 14 & r <= 12)
{
_Spacing = r + 3;
}
else if (r == 25)
{
_Spacing = r + 4;
}
else
{
_Spacing = r + 5;
}
}
//------------------------------------------------------------------
poly0.Points.Add(new g3d.Point(minx0, maxy0 - r / 2, maxz0 - r / 2));
poly0.Points.Add(new g3d.Point(maxx0 - _LapLenght * r - _CrankRatio * r - 50, maxy0 - r / 2, maxz0 - r / 2));
poly0.Points.Add(new g3d.Point(maxx0 - _LapLenght * r - 50, maxy0 - r / 2, maxz0 - r / 2 - _Spacing));
poly0.Points.Add(new g3d.Point(maxx0, maxy0 - r / 2, maxz0 - r / 2 - _Spacing));
poly1.Points.Add(new g3d.Point(maxx0 - _LapLenght * r, maxy1 - r / 2, maxz1 - r / 2));
poly1.Points.Add(new g3d.Point(maxx1, maxy1 - r / 2, maxz1 - r / 2));
//-------------------------------------------------------------------
//end tạo điểm polygon
rebargroup0.Polygons.Clear();
rebargroup0.Polygons.Add(poly0);
rebargroup0.OnPlaneOffsets.Clear();
rebargroup0.OnPlaneOffsets.Add(0.0);
rebargroup0.Modify();
rebargroup1.Polygons.Clear();
rebargroup1.Polygons.Add(poly1);
rebargroup1.OnPlaneOffsets.Clear();
rebargroup1.OnPlaneOffsets.Add(0.0);
rebargroup1.Modify();
}
catch (Exception)
{
throw;
}
}
}
catch (Exception)
{
throw;
}
return(true);
}
public void createconnection(Point center_point, ArrayList Gratting_assembly_arraylist)
{
foreach (Identifier ID in Gratting_assembly_arraylist)
{
Part part1 = (Part)this.myModel.SelectModelObject(ID);
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
this.myModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
this.Get_Lower_face_edge(part1);
string Partprofile1;
string Partprofile2;
if (this.data.holeType == 0)
{
Partprofile1 = "ROD" + (this.data.holeDiam - this.data.Plate_h).ToString();
Partprofile2 = "ROD" + this.data.holeDiam.ToString();
}
else
{
Partprofile1 = this.data.hole_L.ToString() + "*" + this.data.hole_w.ToString();
Partprofile2 = Partprofile1;
}
Assembly assembly = part1.GetAssembly();
assembly.SetMainPart(part1);
ArrayList secondaries = assembly.GetSecondaries();
for (int index = 0; index < secondaries.Count; ++index)
{
if (secondaries[index].GetType().Name == "PolyBeam")
{
secondaries.RemoveAt(secondaries.IndexOf(secondaries[index]));
if (index > 0)
{
--index;
}
else
{
index = 0;
}
if (secondaries.Count == 0)
{
break;
}
}
if (((Part)secondaries[index]).Class != "211")
{
this.CreateCut(center_point, (Part)secondaries[index], Partprofile2).Delete();
}
}
Beam cut1 = this.CreateCut(center_point, part1, Partprofile1);
OBB obb1 = this.CreateObb((Part)cut1);
List <LineSegment> lowerFaceEdge = this.Get_Lower_face_edge(part1);
List <Beam> beamList = new List <Beam>();
List <LineSegment> lineSegmentList = new List <LineSegment>();
if (this.data.holeType == 0)
{
Point point1 = new Point();
Point point2 = new Point();
foreach (LineSegment lineSegment in lowerFaceEdge)
{
if (obb1.Intersects(lineSegment))
{
LineSegment obb2 = Intersection.LineSegmentToObb(lineSegment, obb1);
lineSegmentList.Add(obb2);
}
}
Point point1_1 = lineSegmentList[lineSegmentList.Count / 2].Point1;
List <LineSegment> lowerEdge = this.new_get_lower_edge(part1);
ArrayList arrayList = new ArrayList();
List <Point> pointList = new List <Point>();
Tekla.Structures.Model.Solid solid = cut1.GetSolid();
foreach (LineSegment line in lowerEdge)
{
if ((uint)solid.Intersect(line).Count > 0U)
{
foreach (object obj in solid.Intersect(line))
{
pointList.Add(obj as Point);
}
}
}
Point P1 = pointList[0];
Point P2 = pointList[pointList.Count - 1];
if (point1_1 == P1 || point1_1 == P2)
{
point1_1 = lineSegmentList[lineSegmentList.Count / 2 - 1].Point1;
}
Chamfer C = new Chamfer();
C.Type = Chamfer.ChamferTypeEnum.CHAMFER_ARC_POINT;
PolyBeam polyBeam = new PolyBeam();
polyBeam.Profile.ProfileString = "PL" + this.data.Plate_b.ToString() + "*" + this.data.Plate_h.ToString();
polyBeam.Position.Depth = Position.DepthEnum.FRONT;
polyBeam.Position.Plane = Position.PlaneEnum.MIDDLE;
polyBeam.Position.Rotation = Position.RotationEnum.TOP;
polyBeam.Position.DepthOffset = this.data.offset;
polyBeam.Material.MaterialString = this.data.Plate_matrial;
polyBeam.PartNumber.Prefix = this.data.Pos_1;
polyBeam.PartNumber.StartNumber = this.data.Plate_pos2;
polyBeam.Name = this.data.Plate_name;
polyBeam.AddContourPoint(new ContourPoint(P1, (Chamfer)null));
polyBeam.AddContourPoint(new ContourPoint(point1_1, C));
polyBeam.AddContourPoint(new ContourPoint(P2, (Chamfer)null));
polyBeam.Insert();
Beam cut2 = this.CreateCut(center_point, part1, Partprofile2);
this.insert_weld(part1, (Part)polyBeam);
cut1.Delete();
cut2.Delete();
ModelObjectEnumerator booleans = polyBeam.GetBooleans();
while (booleans.MoveNext())
{
(booleans.Current as BooleanPart).Delete();
}
}
else
{
foreach (LineSegment lineSegment in lowerFaceEdge)
{
if (obb1.Intersects(lineSegment))
{
try
{
LineSegment obb2 = Intersection.LineSegmentToObb(lineSegment, obb1);
Beam beam = this.insert_toeplate(obb2.Point1, obb2.Point2);
this.insert_weld(part1, (Part)beam);
beamList.Add(beam);
}
catch (Exception)
{
}
}
}
cut1.Delete();
foreach (Part part2 in beamList)
{
ModelObjectEnumerator booleans = part2.GetBooleans();
while (booleans.MoveNext())
{
(booleans.Current as BooleanPart).Delete();
}
}
for (int index = 0; index < beamList.Count; ++index)
{
try
{
this.part_cut((Part)beamList[index], (Part)beamList[index + 1]);
}
catch (Exception)
{
}
}
try
{
this.part_cut((Part)beamList[beamList.Count - 1], (Part)beamList[0]);
}
catch (Exception)
{
}
for (int index = 0; index < secondaries.Count; ++index)
{
Beam beam = secondaries[index] as Beam;
if (beam.Class == "211")
{
secondaries.Remove((object)beam);
index = -1;
}
}
foreach (Part GPart in secondaries)
{
foreach (LineSegment lineSegment in this.Get_Lower_face_edge(GPart))
{
if (obb1.Intersects(lineSegment))
{
try
{
LineSegment obb2 = Intersection.LineSegmentToObb(lineSegment, obb1);
Beam beam = this.insert_toeplate(obb2.Point1, obb2.Point2);
beamList.Add(beam);
}
catch (Exception)
{
}
}
}
}
for (int index1 = 0; index1 <= beamList.Count - 1; ++index1)
{
Beam beam1 = beamList[index1];
for (int index2 = index1 + 1; index2 <= beamList.Count - 1; ++index2)
{
Beam beam2 = beamList[index2];
this.combine_beams_have_same_vector((Part)beam1, (Part)beam2);
}
}
}
}
}
