private void btn_multiBeams_Click(object sender, EventArgs e)
{
try
{
Picker picker = new Picker();
ArrayList points = picker.PickPoints(Picker.PickPointEnum.PICK_POLYGON);
if (points.Count >= 3)
{
TSG.Point start = new TSG.Point(0, 0, 0);
TSG.Point middle = new TSG.Point(0, 0, 0);
TSG.Point end = new TSG.Point(0, 0, 0);
TSG.Vector vectorFit = new TSG.Vector();
TSG.Vector vectorZ = new TSG.Vector();
TSG.Vector vectorOne = new TSG.Vector();
TSG.Vector vectorTwo = new TSG.Vector();
ArrayList listBeams = new ArrayList();
ArrayList listPlates = new ArrayList();
double angelDegree = 0.0;
for (int i = 0; i < points.Count - 1; i++)
{
TSM.Beam beam = BeamFirst(points[i] as TSG.Point, points[i + 1] as TSG.Point);
beam.Insert();
listBeams.Add(beam);
this.model.CommitChanges();
}
double primaryWidth = 0.0;
double primaryHeight = 0.0;
for (int i = 0; i < points.Count - 1; i++)
{
try
{
start = points[i] as TSG.Point;
middle = points[i + 1] as TSG.Point;
end = points[i + 2] as TSG.Point;
}
catch
{
}
vectorOne = new TSG.Vector(middle.X - start.X, middle.Y - start.Y, middle.Z - start.Z);
vectorOne.Normalize();
vectorTwo = new TSG.Vector(middle.X - end.X, middle.Y - end.Y, middle.Z - end.Z);
vectorTwo.Normalize();
double angle = vectorOne.GetAngleBetween(vectorTwo);
angelDegree = angle * 180 / Math.PI;
//TSG.Vector vectorFit = new TSG.Vector(1 * Math.Cos(angle / 2), 1 * Math.Cos(angle / 2), 0);
vectorFit = new TSG.Vector(vectorOne.X + vectorTwo.X, vectorOne.Y + vectorTwo.Y, vectorOne.Z + vectorTwo.Z);
vectorZ = vectorOne.Cross(vectorTwo);
TSG.CoordinateSystem coordinateSystem = new TSG.CoordinateSystem();
double thick;
if (tb_thcikPlates.Text != string.Empty)
{
double.TryParse(tb_thcikPlates.Text, out thick);
}
else
{
thick = 20.0;
}
double offset = thick;
double angleFD = 90 - (angelDegree / 2);
double angleFR = Math.PI * angleFD / 180;
double width = 0.0;
double heigth = 0.0;
double x = Math.Round(vectorFit.X, 2, MidpointRounding.ToEven);
double y = Math.Round(vectorFit.Y, 2, MidpointRounding.ToEven);
double z = Math.Round(vectorFit.Z, 2, MidpointRounding.ToEven);
TSM.Beam beam1 = listBeams[i] as TSM.Beam;
TSM.Beam beam2 = listBeams[i + 1] as TSM.Beam;
beam1.GetReportProperty("WIDTH", ref primaryWidth);
beam1.GetReportProperty("HEIGHT", ref primaryHeight);
if (x == 0.0 && y == 0.0 && z == 0.0)
{
TSG.Vector bAxisX = beam1.GetCoordinateSystem().AxisX;
TSG.Vector bAxisY = beam1.GetCoordinateSystem().AxisY;
TSG.Vector bAxisZ = bAxisY.Cross(bAxisX);
coordinateSystem = new TSG.CoordinateSystem(middle, bAxisZ, bAxisY);
}
else
{
coordinateSystem = new TSG.CoordinateSystem(
middle, vectorFit, vectorZ);
}
TSM.WorkPlaneHandler planeHandler = model.GetWorkPlaneHandler();
TSM.TransformationPlane original = planeHandler.GetCurrentTransformationPlane();
TSM.TransformationPlane beamPlane = new TSM.TransformationPlane(coordinateSystem);
planeHandler.SetCurrentTransformationPlane(beamPlane);
FitBeam(beam1, -offset);
FitBeam(beam2, offset);
if (z != 0)
{
vectorZ = vectorTwo.Cross(vectorOne);
planeHandler.SetCurrentTransformationPlane(original);
TSG.CoordinateSystem coordinatePlate = new TSG.CoordinateSystem(
middle, vectorZ, vectorFit);
TSM.TransformationPlane beamPlate = new TSM.TransformationPlane(coordinatePlate);
planeHandler.SetCurrentTransformationPlane(beamPlate);
width = primaryWidth;
heigth = 50 + primaryHeight / (Math.Cos(angleFR));
}
else
{
width = 50 + primaryWidth / (Math.Cos(angleFR));
heigth = primaryHeight;
}
bool positionPlate = true;
for (int k = 0; k < 2; k++)
{
TSM.ContourPlate plate = PlateFirst(width, heigth, offset);
if (positionPlate)
{
plate.Position.Depth = TSM.Position.DepthEnum.BEHIND;
positionPlate = false;
}
else
{
plate.Position.Depth = TSM.Position.DepthEnum.FRONT;
}
plate.Insert();
listPlates.Add(plate);
}
TSM.ContourPlate plate1 = listPlates[0] as TSM.ContourPlate;
TSM.ContourPlate plate2 = listPlates[1] as TSM.ContourPlate;
BoltPlatetoPlate(plate1, plate2, heigth, width);
WeldBeamToPlate(beam1, plate1);
WeldBeamToPlate(beam2, plate2);
planeHandler.SetCurrentTransformationPlane(original);
this.model.CommitChanges();
listPlates.Clear();
}
this.model.CommitChanges();
listBeams.Clear();
}
else
{
MessageBox.Show(Tekla.Structures.Dialog.UIControls.LocalizeForm.Localization.GetText("albl_Invalid_input_parts"));//translation of text in message box
}
}
catch
{
}
}
private void btnConvert_Click(object sender, EventArgs e)
{
ModelObjectSelector mos = new ModelObjectSelector();
TSM.ModelObjectEnumerator moe = mos.GetSelectedObjects();
moe.SelectInstances = false;
while (moe.MoveNext())
{
if (moe.Current is TSM.Part)
{
TSM.Part part = moe.Current as TSM.Part;
// this method needs to be called to properly fill all the properties of the part
part.Select();
double partLength = 0.0;
double partHeight = 0.0;
double partWidth = 0.0;
part.GetReportProperty("LENGTH", ref partLength);
part.GetReportProperty("HEIGHT", ref partHeight);
part.GetReportProperty("WIDTH", ref partWidth);
TSM.ModelObjectEnumerator MyAllBooleans = part.GetBooleans();
TSM.ModelObjectEnumerator MyAllBolts = part.GetBolts();
TSM.ModelObject MyFather = part.GetFatherComponent();
TSG.CoordinateSystem coordinateSystem = part.GetCoordinateSystem();
TSM.WorkPlaneHandler planeHandler = model.GetWorkPlaneHandler();
// before we create a new plane we need to store the old one
TSM.TransformationPlane original = planeHandler.GetCurrentTransformationPlane();
TSM.TransformationPlane partPlane = new TSM.TransformationPlane(coordinateSystem);
planeHandler.SetCurrentTransformationPlane(partPlane);
//this.DrawCoordinateSystem();
TSG.Point p1 = new TSG.Point(0, partHeight / 2, 0);
TSG.Point p2 = new TSG.Point(partLength, partHeight / 2, 0);
TSG.Point p3 = new TSG.Point(partLength, -partHeight / 2, 0);
TSG.Point p4 = new TSG.Point(0, -partHeight / 2, 0);
TSM.ContourPlate CP = new TSM.ContourPlate();
TSM.ContourPoint conturePoint1 = new TSM.ContourPoint(p1, null);
TSM.ContourPoint conturePoint2 = new TSM.ContourPoint(p2, null);
TSM.ContourPoint conturePoint3 = new TSM.ContourPoint(p3, null);
TSM.ContourPoint conturePoint4 = new TSM.ContourPoint(p4, null);
CP.AddContourPoint(conturePoint1);
CP.AddContourPoint(conturePoint2);
CP.AddContourPoint(conturePoint3);
CP.AddContourPoint(conturePoint4);
CP.Name = "NEM";
CP.Finish = "xxx";
CP.Profile.ProfileString = "PL" + partWidth;
CP.Material.MaterialString = "S235";
CP.Class = "1";
CP.Insert();
while (MyAllBooleans.MoveNext())
{
try
{
TSM.BooleanPart partBooleans = MyAllBooleans.Current as TSM.BooleanPart;
TSM.Part partBool = partBooleans.OperativePart as TSM.Part;
partBool.Class = TSM.BooleanPart.BooleanOperativeClassName;
partBool.Insert();
TSM.BooleanPart myboolpart = new TSM.BooleanPart();
myboolpart.Father = CP;
myboolpart.SetOperativePart(partBool);
myboolpart.Insert();
partBool.Delete();
}
catch (Exception)
{
throw;
}
}
while (MyAllBolts.MoveNext())
{
try
{
if (MyAllBolts.Current is TSM.BoltGroup)
{
TSM.BoltGroup b = MyAllBolts.Current as TSM.BoltGroup;
TSM.Part toBolted = b.PartToBeBolted as TSM.Part;
TSM.Part toBolt = b.PartToBoltTo as TSM.Part;
if (toBolted.Identifier.ID == toBolt.Identifier.ID)
{
b.PartToBeBolted = CP;
b.PartToBoltTo = CP;
}
else if (toBolted.Identifier.ID == part.Identifier.ID)
{
b.PartToBoltTo.GetBolts();
b.PartToBeBolted = CP;
}
else
{
b.PartToBoltTo = CP;
b.PartToBeBolted.GetBolts();
}
b.Insert();
}
}
catch (Exception)
{
throw;
}
}
if (MyFather != null)
{
TSM.ModelObjectEnumerator elementOfComponenet = MyFather.GetChildren();
while (elementOfComponenet.MoveNext())
{
TSM.Part element = elementOfComponenet.Current as TSM.Part;
try
{
if (element is TSM.Part)
{
if (element.Identifier.ID == part.Identifier.ID)
{
element = CP;
element.Modify();
}
else
{
continue;
}
}
else
{
continue;
}
}
catch (Exception)
{
throw;
}
}
}
part.Delete();
planeHandler.SetCurrentTransformationPlane(original);
}
}
this.model.CommitChanges();
}