private void AddPartNumber(string part, string my)
{
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = new ECUInformation();
ecuinfo = pnc.GetECUInfo(part, "");
dt.Rows.Add(ecuinfo.Carmodel.ToString(), ecuinfo.Enginetype.ToString(), part /*, ecuinfo.Turbomodel.ToString(), ecuinfo.Isturbo.ToString(), ecuinfo.Bhp.ToString(), ecuinfo.Torque.ToString()*/, ecuinfo.Softwareversion, my);
}
private void AddPartNumber(string part, string my)
{
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = new ECUInformation();
ecuinfo = pnc.GetECUInfo(part, "");
dt.Rows.Add(ecuinfo.Carmodel.ToString(), ecuinfo.Enginetype.ToString(), part/*, ecuinfo.Turbomodel.ToString(), ecuinfo.Isturbo.ToString(), ecuinfo.Bhp.ToString(), ecuinfo.Torque.ToString()*/, ecuinfo.Softwareversion, my);
}
private void ConvertPartNumber()
{
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = pnc.GetECUInfo(buttonEdit1.Text, "");
lblCarModel.Text = "---";
lblEngineType.Text = "---";
lblPower.Text = "---";
lblTorque.Text = "---";
checkEdit1.Checked = false;
checkEdit2.Checked = false;
checkEdit4.Checked = false;
checkEdit5.Checked = false;
if (ecuinfo.Valid)
{
lblCarModel.Text = ecuinfo.Carmodel.ToString();
lblEngineType.Text = ecuinfo.Enginetype.ToString();
lblPower.Text = ecuinfo.Bhp.ToString() + " bhp";
//lblStageI.Text = ecuinfo.Stage1boost.ToString() + " bar";
//lblStageII.Text = ecuinfo.Stage2boost.ToString() + " bar";
//lblStageIII.Text = ecuinfo.Stage3boost.ToString() + " bar";
if (ecuinfo.Is2point3liter)
{
checkEdit1.Checked = false;
checkEdit2.Checked = true;
}
else
{
checkEdit1.Checked = true;
checkEdit2.Checked = false;
}
if (ecuinfo.Isturbo) checkEdit4.Checked = true;
if (ecuinfo.Isfpt)
{
checkEdit5.Checked = true;
checkEdit4.Checked = true;
}
if (ecuinfo.Isaero)
{
checkEdit4.Checked = true;
checkEdit5.Checked = true;
}
lblTorque.Text = ecuinfo.Torque.ToString() + " Nm";
if (System.IO.File.Exists(Path.Combine(Application.StartupPath, "Binaries\\" + buttonEdit1.Text + ".BIN")))
{
simpleButton2.Enabled = true;
simpleButton3.Enabled = true;
simpleButton4.Enabled = true;
}
else
{
simpleButton2.Enabled = false;
simpleButton3.Enabled = false;
simpleButton4.Enabled = false;
}
}
else
{
MessageBox.Show("The entered partnumber was not recognized by T7Suite");
}
}
private void barButtonItem28_ItemClick(object sender, ItemClickEventArgs e)
{
// tune to stage 1!!!
if (File.Exists(m_currentfile))
{
// read tuned marker to see if binary has been tuned before
T8Header fh = new T8Header();
fh.init(m_currentfile);
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = pnc.GetECUInfo(fh.PartNumber, "");
// start window to ask user for desired horses (depending on E85 usage?)
frmTuneBinary frmTune = new frmTuneBinary();
if (frmTune.ShowDialog() == DialogResult.OK)
{
int desiredHP = frmTune.DesiredHP;
bool carRunsE85 = frmTune.CarRunsE85;
// convert HP to torque and airmass
//int torque = PowerToTorque(desiredHP, 6000);
//int peaktorque = (110 * torque) / 100;
int peaktorque = frmTune.PeakTorque;
int maxairmass = TorqueToAirmass(peaktorque, carRunsE85);
// give user a warning if airmass/c > 1300 mg/c
if (maxairmass > 1300)
{
MessageBox.Show("Your maximum requested airmass exceeds 1300 mg/c [" + maxairmass.ToString() + " mg/c]. Please make sure all your other maps will support this airflow!", "Warning!", MessageBoxButtons.OK);
}
string msg = "Partnumber not recognized, tuning will continue anyway, please verify settings afterwards";
msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
if (ecuinfo.Valid)
{
msg = "Partnumber " + fh.PartNumber + ", carmodel " + ecuinfo.Carmodel.ToString() + ", engine " + ecuinfo.Enginetype.ToString();
msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
}
PSTaskDialog.cTaskDialog.ForceEmulationMode = false;
PSTaskDialog.cTaskDialog.EmulatedFormWidth = 600;
PSTaskDialog.cTaskDialog.UseToolWindowOnXP = false;
PSTaskDialog.cTaskDialog.VerificationChecked = true;
PSTaskDialog.cTaskDialog.ShowTaskDialogBox("Tune me up™ wizard", "This wizard will tune your binary.", "Several maps will be altered" + Environment.NewLine + msg, "Happy driving!!!\nDilemma © 2009", "The author does not take responsibility for any damage done to your car or other objects in any form!", "Show me a summary after tuning", "", "Yes, tune me up!|No thanks!", eTaskDialogButtons.None, eSysIcons.Information, eSysIcons.Warning);
switch (PSTaskDialog.cTaskDialog.CommandButtonResult)
{
case 0:
// tune to stage x
// must use fixed maps, scaled to be good for the current airmass (e.g. pedalrequest map)
//TuneToStageNew(1, maxairmass, peaktorque, desiredHP, ecuinfo.Enginetype, carRunsE85);
TuneMeUp(maxairmass, peaktorque, desiredHP, ecuinfo.Enginetype, carRunsE85);
break;
case 1:
// cancel
break;
}
if (PSTaskDialog.cTaskDialog.VerificationChecked && PSTaskDialog.cTaskDialog.CommandButtonResult != 1)
{
TuningReport tuningrep = new TuningReport();
tuningrep.DataSource = resumeTuning;
tuningrep.CreateReport();
tuningrep.ShowPreview(defaultLookAndFeel1.LookAndFeel);
}
}
}
}
private void ConvertPartNumber()
{
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = pnc.GetECUInfo(buttonEdit1.Text, "");
lblCarModel.Text = "---";
lblEngineType.Text = "---";
lblPower.Text = "---";
lblTorque.Text = "---";
checkEdit1.Checked = false;
checkEdit2.Checked = false;
checkEdit4.Checked = false;
checkEdit5.Checked = false;
if (ecuinfo.Valid)
{
lblCarModel.Text = ecuinfo.Carmodel.ToString();
lblEngineType.Text = ecuinfo.Enginetype.ToString();
lblPower.Text = ecuinfo.Bhp.ToString() + " bhp";
//lblStageI.Text = ecuinfo.Stage1boost.ToString() + " bar";
//lblStageII.Text = ecuinfo.Stage2boost.ToString() + " bar";
//lblStageIII.Text = ecuinfo.Stage3boost.ToString() + " bar";
if (ecuinfo.Is2point3liter)
{
checkEdit1.Checked = false;
checkEdit2.Checked = true;
}
else
{
checkEdit1.Checked = true;
checkEdit2.Checked = false;
}
if (ecuinfo.Isturbo)
{
checkEdit4.Checked = true;
}
if (ecuinfo.Isfpt)
{
checkEdit5.Checked = true;
checkEdit4.Checked = true;
}
if (ecuinfo.Isaero)
{
checkEdit4.Checked = true;
checkEdit5.Checked = true;
}
lblTorque.Text = ecuinfo.Torque.ToString() + " Nm";
if (System.IO.File.Exists(Path.Combine(Application.StartupPath, "Binaries\\" + buttonEdit1.Text + ".BIN")))
{
simpleButton2.Enabled = true;
simpleButton3.Enabled = true;
simpleButton4.Enabled = true;
}
else
{
simpleButton2.Enabled = false;
simpleButton3.Enabled = false;
simpleButton4.Enabled = false;
}
}
else
{
MessageBox.Show("The entered partnumber was not recognized by T7Suite");
}
}