public static SkCallBackFun create(skcallbackfun fun)
{
SkCallBackFun acttem = new SkCallBackFun();
acttem.callbackfun = fun;
return(acttem);
}
public static SkCallBackFun getInstance()
{
if (instance == null)
{
instance = new SkCallBackFun();
}
return(instance);
}
public void ActLogic(List <T_GelStep> act_group, List <T_GelStep> act_group_next, double dt)
{
if (act_group != null && act_group.Count != 0 && act_group[0].State == 0)
{
int next_state = 2;
var seque_act = Sequence.create();
var exper_package = ((ExperimentPackage)act_group[0].ExperPackage);
seque_act.exp_pack = exper_package;
AbstractCanDevice device = null;
foreach (var act in act_group)
{
resmanager.tip_count += act.InjectCount;
}
if (act_group[0].InjectCount != 0)
{
var act_next = act_group_next == null ? null : act_group_next[0];
device = injectorDevice;
act_group.Sort((a, b) => { return(((ExperimentPackage)a.ExperPackage).piercer_index > ((ExperimentPackage)b.ExperPackage).piercer_index ? 1 : -1); });
seque_act = generater.GenerateAction(act_group);
if (act_next != null && act_next.InjectCount == 0)
{
seque_act.AddAction(SkCallBackFun.create((ActionBase act_tem) =>
{
inj_wait_time = 9999;
return(true);
}));
}
}
else
{
var act = act_group[0];
var act_next = act_group_next == null ? null : act_group_next[0];
var resinfo = resmanager.GetResByCode(exper_package.GetGelMask(), "T_BJ_GelSeat");
if (resinfo == null)
{
resinfo = resmanager.GetResByCode(exper_package.GetGelMask(), "T_BJ_Centrifuge");
}
if ((resinfo == null || !resinfo.PutOk) && act.StepClass != TestStepEnum.LoadGel)
{
return;
}
switch (act.StepClass)
{
case TestStepEnum.LoadGel:
{
if (actionmanager.getAllActionsCount(handDevice) == 0)
{
var take_seat = resmanager.GetResByCode(exper_package.GetGelMask(), "T_BJ_GelSeat", "", "3");
var paper_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "4", null, exper_package.is_crossmatching);
if (paper_seat != null)
{
device = handDevice;
if (take_seat != null)
{
generater.GenerateTakeGelFromNormal(take_seat, ref seque_act);
}
else
{
seque_act.AddAction(HandTakeGelFromWare.create(handDevice, 3001, gelwareDevice, exper_package.gel_mask_id, exper_package.GetGelMask(), exper_package.GetSampleCode(act.SampleIndex)));
}
seque_act.AddAction(HandPutGelToNormal.create(handDevice, 3001, gelwareDevice, paper_seat));
if (act_next != null && act_next.StepClass != TestStepEnum.LoadGel)
{
seque_act.AddAction(SkCallBackFun.create((ActionBase act_tem) => {
hand_wait_time = 999999;
var ware_act = MoveTo.create(gelwareDevice, 3000, 0);
ware_act.runAction(gelwareDevice);
return(true);
}));
}
exper_package.piercer_index = paper_seat.CountX;
paper_seat.Values[paper_seat.CountX, 0] = new ResInfoData();
seque_act.destroyfun = (ActionBase act_tem) =>
{
paper_seat.Values[paper_seat.CountX, 0] = null;
return(true);
};
next_state = 2;
}
else
{
next_state = 0;
}
}
else
{
next_state = 0;
}
}
break;
case TestStepEnum.KaiKongGel:
{
int handrx = 0;
int injrx = 0;
var device_hand = new ActionDevice(handDevice);
var device_inj = new ActionDevice(injectorDevice);
next_state = 0;
if (resinfo.Purpose != "4")
{
var put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "4");
if (put_seat == null && resinfo.Purpose != "3")
{
put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3");
}
if (put_seat != null)
{
device = handDevice;
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque_act);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque_act);
}
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque_act);
next_state = 0;
}
}
else
{
bool is_next_kaikong = act_next != null ? act_next.StepClass == TestStepEnum.KaiKongGel : false;
var paper_seat = resmanager.GetResByCode(exper_package.GetGelMask(), "T_BJ_GelSeat", "", "4");
int yb = is_next_kaikong ? -1 : 0;
if (paper_seat != null &&
device_hand.GetRealX(ref handrx) &&
(handrx + 1000) < paper_seat.X && ActionDevice.hand_tx < paper_seat.X &&
device_inj.GetRealX(ref injrx) &&
(injrx + 1000) < paper_seat.InjectorX && ActionDevice.inj_tx < paper_seat.InjectorX + 1000)
{
device = piercerDevice;
seque_act.AddAction(PaperCard.create(piercerDevice, 3000, paper_seat, yb));
seque_act.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
exper_package.is_open = true;
resmanager.gel_count++;
return(true);
}));
next_state = 2;
}
}
}
break;
case TestStepEnum.JYJS:
{
exper_package.is_jyjs = true;
next_state = 2;
}
break;
case TestStepEnum.ZKDFY:
{
next_state = 0;
if (resinfo.Purpose == "1")
{
next_state = 0;
exper_package.hatch_cur_time += dt;
if (exper_package.hatch_cur_time >= exper_package.hatch_time)
{
next_state = 2;
}
}
else if (!(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
var put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "1");
if (put_seat == null && resinfo.Purpose != "3")
{
put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3");
}
if (put_seat != null)
{
device = handDevice;
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque_act);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque_act);
}
exper_package.hatch_cur_time = 0;
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque_act);
next_state = 0;
}
else
{
next_state = 0;
}
}
}
break;
case TestStepEnum.ZKDLXJ:
{
if (actionmanager.getAllActionsCount(handDevice) == 0)
{
next_state = 0;
if (resinfo.Purpose != "lxj" && !(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
//查看可用离心机
var centrifuge_list = resmanager.centrifuge_list.Where(item => item.Status == 1).ToList();
centrifuge_list.Sort((a, b) => { return(a.LastUseTime < b.LastUseTime ? 1 : -1); });
foreach (var seat in centrifuge_list)
{
CentrifugeMDevice cendev = cenMrg.GetCentrifugeByCode(seat.Code);
if (seat.Status == 1 && cendev != null)
{
device = handDevice;
bool is_last_cent = seat == centrifuge_list[centrifuge_list.Count - 1];
bool iscanputcen = IsCanPutCen(cendev);
var put_seat = resmanager.GetResByCode("null", "T_BJ_Centrifuge", cendev.Centrifugem.Code.SetValue);
if (iscanputcen == false)
{
put_seat = null;
}
//放进待定位
if (put_seat == null && resinfo.Purpose != "3" && is_last_cent)
{
put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3");
}
if (put_seat != null)
{
var spaw = Spawn.create();
var put_seque = Sequence.create();
if (put_seat.Purpose == "lxj")
{
//打开离心机门
var opendoor_act = HandOpenCloseDoor.create(handDevice, 5000, cendev.Centrifugem.Code.SetValue, true);
put_seque.AddAction(opendoor_act);
}
var put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref put_seque);
spaw.AddAction(put_seque);
seque_act.AddAction(spaw);
if (put_seat.Purpose == "lxj")
{
spaw.AddAction(MoveTo.create(cendev, 30001, -1, -1, put_seat.CenGelP[put_seat.CountX]));
generater.GeneratePutGelToCent(cendev.Centrifugem.Code.SetValue, put_seat, put_gel, ref seque_act);
}
else
{
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque_act);
}
seat.LastUseTime = Engine.getInstance().getSystemMs();
break;
}
else
{
next_state = 0;
}
}
}
}
}
else
{
next_state = 0;
}
}
break;
case TestStepEnum.PutPeiGelBack:
{
var put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "2");
if (put_seat != null && resinfo.Purpose == "lxj")
{
device = handDevice;
var put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque_act);
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque_act);
next_state = 2;
}
}
break;
case TestStepEnum.XJPD:
{
var put_seat = resmanager.GetResByCode("", "T_BJ_Camera"); //相机位
var wasted_seat = resmanager.GetResByCode("", "T_BJ_WastedSeat", "", "1"); //垃圾位
var daiding_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3"); //待定位
if (put_seat != null && wasted_seat != null && !(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
device = handDevice;
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque_act);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque_act);
}
seque_act.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
seque_act.AddAction(MoveTo.create(handDevice, 3000, (int)put_seat.X, (int)(put_seat.Y), -1));
seque_act.AddAction(MoveTo.create(handDevice, 3000, -1, -1, (int)(put_seat.Z)));
//拍照分析
seque_act.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
opDevice.CameraLight(true);
bool result = true;
if (cameraDevice.IsOpen == false)
{
result = cameraDevice.Open();
}
var bm = cameraDevice.CaptureImage();
cameraDevice.Save(bm, exper_package);
opDevice.CameraLight(false);
return(true);
}));
//是否还有动作
if (exper_package.action_list.Count > 1 && daiding_seat != null)
{
seque_act.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
generater.GeneratePutGelToNormal(daiding_seat, put_gel, ref seque_act);
}
else
{
seque_act.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
seque_act.AddAction(MoveTo.create(handDevice, 3000, (int)wasted_seat.X, (int)(wasted_seat.Y)));
seque_act.AddAction(HandPutCard.create(handDevice, 3000, (int)wasted_seat.ZPut, 0));
seque_act.AddAction(SkCallBackFun.create((ActionBase act_tem) => {
DelPackage(exper_package);
return(true);
}));
}
next_state = 2;
}
}
break;
case TestStepEnum.ECONOMIZECOUNTTIME:
{
next_state = 0;
if (exper_package.is_open)
{
exper_package.after_kktime -= dt;
if (exper_package.after_kktime <= 0)
{
device = handDevice;
next_state = 2;
exper_package.after_kktime = 0;
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque_act);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque_act);
}
var wasted_seat = resmanager.GetResByCode("", "T_BJ_WastedSeat"); //垃圾位
seque_act.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
seque_act.AddAction(MoveTo.create(handDevice, 3000, (int)wasted_seat.X, (int)(wasted_seat.Y)));
seque_act.AddAction(HandPutCard.create(handDevice, 3000, (int)wasted_seat.ZPut, 0));
}
}
}
break;
}
}
if (device != null)
{
seque_act.AddAction(SkCallBackFun.create((ActionBase act) =>
{
foreach (var act_tem in act_group)
{
act_tem.State = next_state;
}
return(true);
}));
foreach (var act_tem in act_group)
{
act_tem.State = 1;
}
seque_act.runAction(device);
}
else
{
foreach (var act_tem in act_group)
{
act_tem.State = next_state;
}
}
}
}
//离心开始逻辑
public bool CenRunLogic(CentrifugeMDevice cendev)
{
bool is_allcenact = true; //是否全是离心动作
bool is_allputok = true; //是否全是已放好
bool is_empty = true; //是否为空
bool is_gelfull = false; //是否已满
bool is_gelsoon = false; //是否有卡快要离心
int gel_count = 0;
List <ResInfoData> resinfo_list = new List <ResInfoData>();
if (experiment_package_list.Count == 0)
{
return(false);
}
foreach (var seat in resmanager.centrifuge_list)
{
if (seat.Code == cendev.Centrifugem.Code.SetValue)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.PutOk)
{
is_empty = false;
var exp_pack = GetExpPackageByMask(resinfo.GetGelMask());
if (exp_pack == null)
{
exp_pack = GetExpPackageByMask(resinfo.GetCodeAt(0));
}
System.Diagnostics.Debug.Assert(exp_pack != null);
if (exp_pack == null)
{
return(false);
}
is_allcenact = is_allcenact && exp_pack.GetActionTypeAt(0) == TestStepEnum.ZKDLXJ;
is_allputok = is_allputok && resinfo.PutOk;
resinfo_list.Add(resinfo);
gel_count++;
}
}
is_gelfull = gel_count >= seat.Values.Length;
}
}
if ((is_gelfull == false && actionmanager.getAllActionsCount(handDevice) != 0) || actionmanager.getAllActionsCount(cendev) != 0)
{
return(false);
}
//普通卡位是否有卡快要离心
foreach (var seat in resmanager.gelseat_list)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.PutOk && resinfo.FindCode("pei*", false) == false)
{
var exp_pack = GetExpPackageByMask(resinfo.GetGelMask());
if (exp_pack == null)
{
continue;
}
is_gelsoon = (exp_pack.GetActionTypeAt(0) == TestStepEnum.ZKDLXJ) ||
(exp_pack.GetActionTypeAt(0) == TestStepEnum.ZKDFY &&
exp_pack.GetActionTypeAt(1) == TestStepEnum.ZKDLXJ &&
exp_pack.hatch_time - exp_pack.hatch_cur_time <= 20000);
if (seat.Purpose == 4 && exp_pack.FindAct(TestStepEnum.ZKDLXJ) && exp_pack.FindAct(TestStepEnum.ZKDFY) == false)
{
is_gelsoon = true;
}
if (is_gelsoon)
{
break;
}
}
}
if (is_gelsoon)
{
break;
}
}
//检测是否满足运行条件
if (is_allcenact && is_allputok && !is_empty && (!is_gelsoon || is_gelfull))
{
int hspeed = (int)cendev.Centrifugem.HightSpeed.SetValue;
int lspeed = (int)cendev.Centrifugem.LowSpeed.SetValue;
int htime = (int)cendev.Centrifugem.HightSpeedTime.SetValue;
int ltime = (int)cendev.Centrifugem.LowSpeedTime.SetValue;
int uphtime = (int)cendev.Centrifugem.AddHSpeedTime.SetValue;
int upltime = (int)cendev.Centrifugem.AddLSpeedTime.SetValue;
int stime = (int)cendev.Centrifugem.StopSpeedTime.SetValue;
//配平卡动作(如果离心机内卡是单数就再放一张配平卡)
var seque_pei = Sequence.create();
var seque = Sequence.create();
if (resinfo_list.Count() % 2 != 0)
{
var spaw = Spawn.create();
var put_seque = Sequence.create();
//得到配平卡
var pei_gel = resmanager.GetResByCode("pei" + cendev.Centrifugem.Code.SetValue, "T_BJ_GelSeat");
var put_gel = generater.GenerateTakeGelFromNormal(pei_gel, ref put_seque);
T_GelStep[] pei_step = { new T_GelStep(), new T_GelStep() };
pei_step[0].StepClass = TestStepEnum.ZKDLXJ;
pei_step[1].StepClass = TestStepEnum.PutPeiGelBack;
var exp_pack = ExperimentPackage.Create(pei_step.ToList(), pei_gel.GetCodeAt(0), "123", 8, 0, 1, 0, false, 0, 0, false);
exp_pack.is_jyjs = true;
experiment_package_list.Add(exp_pack);
resinfo_list.Add(put_gel);
var put_seat = resmanager.GetResByCode("null", "T_BJ_Centrifuge", cendev.Centrifugem.Code.SetValue);
spaw.AddAction(put_seque);
spaw.AddAction(MoveTo.create(cendev, 30001, -1, -1, put_seat.CenGelP[put_seat.CountX]));
seque_pei.AddAction(spaw);
generater.GeneratePutGelToCent(cendev.Centrifugem.Code.SetValue, put_seat, put_gel, ref seque_pei);
}
seque_pei.AddAction(HandOpenCloseDoor.create(handDevice, 5000, cendev.Centrifugem.Code.SetValue, false));
seque.AddAction(SkWaitForAction.create(handDevice, seque_pei));
seque.AddAction(CentrifugeStart.create(cendev, 6000000, hspeed, lspeed, htime, ltime, uphtime, upltime, stime));
seque.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
foreach (var resinfo in resinfo_list)
{
var exp_pack = GetExpPackageByMask(resinfo.GetGelMask());
if (exp_pack == null)
{
exp_pack = GetExpPackageByMask(resinfo.GetCodeAt(0));
}
System.Diagnostics.Debug.Assert(exp_pack != null);
var act = exp_pack.GetActionAt(0);
act.State = 2;
}
return(true);
}));
seque_pei.runAction(handDevice);
seque.runAction(cendev);
return(true);
}
return(false);
}
//垃圾箱逻辑
public bool RubbishLogic(double dt)
{
if (actionmanager.getAllActionsCount(handDevice) != 0)
{
return(false);
}
//普通卡位
ResInfoData camer_gel = null;
if (resmanager.handseat_resinfo != null && resmanager.handseat_resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Rubbish)
{
camer_gel = resmanager.handseat_resinfo;
camer_gel.Purpose = "hand";
}
if (camer_gel == null)
{
foreach (var seat in resmanager.gelseat_list)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
if (resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Rubbish)
{
camer_gel = resinfo;
}
break;
}
}
if (camer_gel != null)
{
break;
}
}
}
//检测离心机只的卡
if (camer_gel == null)
{
foreach (var seat in resmanager.centrifuge_list)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (seat.Status == 1 && resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
if (resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Rubbish)
{
resinfo.Purpose = "lxj";
resinfo.CenCode = seat.Code;
camer_gel = resinfo;
break;
}
}
}
if (camer_gel != null)
{
break;
}
}
}
//把卡转到垃圾位
if (camer_gel != null && camer_gel.GetActionAt(0) == ActionPoint.ActionPointType.Rubbish)
{
var seque = Sequence.create();
bool is_put = false;
var put_seat = resmanager.GetResByCode("", "T_BJ_WastedSeat");
if (put_seat != null)
{
ResInfoData put_gel = null;
if (camer_gel.Purpose == "lxj")
{
put_gel = generater.GenerateTakeGelFromCent(camer_gel, camer_gel.CenCode, ref seque);
}
else if (camer_gel.Purpose == "hand")
{
put_gel = camer_gel;
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(camer_gel, ref seque);
}
seque.AddAction(MoveTo.create(handDevice, 3000, (int)put_seat.X, (int)(put_seat.Y)));
seque.AddAction(HandPutCard.create(handDevice, 3000, (int)put_seat.ZPut, 0));
seque.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
seque.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
if (camer_gel.Purpose == "hand")
{
resmanager.handseat_resinfo = null;
}
put_gel.RemoveActionAt(0);
return(true);
}));
is_put = true;
}
if (is_put)
{
seque.runAction(handDevice);
return(true);
}
}
return(false);
}
//离心开始逻辑
public bool CenRunLogic(CentrifugeMDevice cendev)
{
if (actionmanager.getAllActionsCount(handDevice) != 0 || actionmanager.getAllActionsCount(cendev) != 0)
{
return(false);
}
bool is_allcenact = true; //是否全是离心动作
bool is_allputok = true; //是否全是已放好
bool is_empty = true; //是否为空
bool is_gelfull = false; //是否已满
bool is_gelsoon = false; //是否有卡快要离心
int gel_count = 0;
List <ResInfoData> resinfo_list = new List <ResInfoData>();
foreach (var seat in resmanager.centrifuge_list)
{
if (seat.Code == cendev.Centrifugem.Code.SetValue)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
is_empty = false;
is_allcenact = is_allcenact && resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Centrifugal;
is_allputok = is_allputok && resinfo.PutOk;
resinfo_list.Add(resinfo);
gel_count++;
}
}
is_gelfull = gel_count >= seat.Values.Length;
}
}
//普通卡位是否有卡快要离心
foreach (var seat in resmanager.gelseat_list)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
is_gelsoon = (resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Centrifugal) ||
(resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Hatch &&
resinfo.GetActionAt(1) == ActionPoint.ActionPointType.Centrifugal &&
resinfo.HatchTime - resinfo.HatchCurTime <= 10);
if (is_gelsoon)
{
break;
}
}
}
if (is_gelsoon)
{
break;
}
}
//检测是否满足运行条件
if (is_allcenact && is_allputok && !is_empty && (!is_gelsoon || is_gelfull))
{
int hspeed = (int)cendev.Centrifugem.HightSpeed.SetValue;
int lspeed = (int)cendev.Centrifugem.LowSpeed.SetValue;
int htime = (int)cendev.Centrifugem.HightSpeedTime.SetValue;
int ltime = (int)cendev.Centrifugem.LowSpeedTime.SetValue;
int uphtime = (int)cendev.Centrifugem.AddHSpeedTime.SetValue;
int upltime = (int)cendev.Centrifugem.AddLSpeedTime.SetValue;
int stime = (int)cendev.Centrifugem.StopSpeedTime.SetValue;
var act = Sequence.create(CentrifugeStart.create(cendev, 300000, hspeed, lspeed, htime, ltime, uphtime, upltime, stime), SkCallBackFun.create((ActionBase acttem) =>
{
foreach (var resinfo in resinfo_list)
{
if (resinfo.InjectFinish)
{
resinfo.RemoveActionAt(0);
}
}
return(true);
}));
act.runAction(cendev);
return(true);
}
return(false);
}
//离心开始逻辑
public bool CenRunLogic(CentrifugeMDevice cendev)
{
bool is_allcenact = true; //是否全是离心动作
bool is_allputok = true; //是否全是已放好
bool is_empty = true; //是否为空
bool is_gelfull = false; //是否已满
bool is_gelsoon = false; //是否有卡快要离心
int gel_count = 0;
List <ResInfoData> resinfo_list = new List <ResInfoData>();
foreach (var seat in resmanager.centrifuge_list)
{
if (seat.Code == cendev.Centrifugem.Code.SetValue)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
is_empty = false;
is_allcenact = is_allcenact && resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Centrifugal;
is_allputok = is_allputok && resinfo.PutOk;
resinfo_list.Add(resinfo);
gel_count++;
}
}
is_gelfull = gel_count >= seat.Values.Length;
}
}
if ((is_gelfull == false && actionmanager.getAllActionsCount(handDevice) != 0) || actionmanager.getAllActionsCount(cendev) != 0)
{
return(false);
}
//普通卡位是否有卡快要离心
foreach (var seat in resmanager.gelseat_list)
{
for (int i = 0; i < seat.Values.Length; i++)
{
ResInfoData resinfo = (ResInfoData)seat.Values[i, 0];
if (resinfo != null && resinfo.InjectFinish && resinfo.PutOk)
{
is_gelsoon = (resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Centrifugal) ||
(resinfo.GetActionAt(0) == ActionPoint.ActionPointType.Hatch &&
resinfo.GetActionAt(1) == ActionPoint.ActionPointType.Centrifugal &&
resinfo.HatchTime - resinfo.HatchCurTime <= 20000);
if (seat.Purpose == 4 && resinfo.FindAct(ActionPoint.ActionPointType.Centrifugal) && resinfo.FindAct(ActionPoint.ActionPointType.Hatch) == false)
{
is_gelsoon = true;
}
if (is_gelsoon)
{
break;
}
}
}
if (is_gelsoon)
{
break;
}
}
//检测是否满足运行条件
if (is_allcenact && is_allputok && !is_empty && (!is_gelsoon || is_gelfull))
{
int hspeed = (int)cendev.Centrifugem.HightSpeed.SetValue;
int lspeed = (int)cendev.Centrifugem.LowSpeed.SetValue;
int htime = (int)cendev.Centrifugem.HightSpeedTime.SetValue;
int ltime = (int)cendev.Centrifugem.LowSpeedTime.SetValue;
int uphtime = (int)cendev.Centrifugem.AddHSpeedTime.SetValue;
int upltime = (int)cendev.Centrifugem.AddLSpeedTime.SetValue;
int stime = (int)cendev.Centrifugem.StopSpeedTime.SetValue;
//配平卡动作(如果离心机内卡是单数就再放一张配平卡)
var seque_pei = Sequence.create();
var seque = Sequence.create();
if (resinfo_list.Count() % 2 != 0)
{
var spaw = Spawn.create();
var put_seque = Sequence.create();
//得到配平卡
var pei_gel = resmanager.GetResByCode("pei" + cendev.Centrifugem.Code.SetValue, "T_BJ_GelSeat");
var put_gel = generater.GenerateTakeGelFromNormal(pei_gel, ref put_seque);
put_gel.ActionList.Add(ActionPointType.Centrifugal);
put_gel.ActionList.Add(ActionPointType.PutPeiGelBack);
put_gel.InjectFinish = true;
resinfo_list.Add(put_gel);
var put_seat = resmanager.GetResByCode("null", "T_BJ_Centrifuge", cendev.Centrifugem.Code.SetValue);
spaw.AddAction(put_seque);
spaw.AddAction(MoveTo.create(cendev, 30001, -1, -1, put_seat.CenGelP[put_seat.CountX]));
seque_pei.AddAction(spaw);
generater.GeneratePutGelToCent(cendev.Centrifugem.Code.SetValue, put_seat, put_gel, ref seque_pei);
}
seque_pei.AddAction(HandOpenCloseDoor.create(handDevice, 5000, cendev.Centrifugem.Code.SetValue, false));
seque.AddAction(SkWaitForAction.create(handDevice, seque_pei));
seque.AddAction(CentrifugeStart.create(cendev, 300000, hspeed, lspeed, htime, ltime, uphtime, upltime, stime));
seque.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
foreach (var resinfo in resinfo_list)
{
if (resinfo.InjectFinish)
{
resinfo.RemoveActionAt(0);
}
}
return(true);
}));
seque_pei.runAction(handDevice);
seque.runAction(cendev);
return(true);
}
return(false);
}
public void Logic(ResInfoData resinfo, double dt)
{
switch (resinfo.GetActionAt(0))
{
case ActionPointType.Hatch:
{
if (resinfo.Purpose == "1")
{
resinfo.HatchCurTime += dt;
if (resinfo.HatchCurTime >= resinfo.HatchTime)
{
resinfo.RemoveActionAt(0);
}
}
else if (!(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
var seque = Sequence.create();
var put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "1");
if (put_seat == null && resinfo.Purpose != "3")
{
put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3");
}
if (put_seat != null)
{
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
//CentrifugeMDevice cendev = cenMrg.GetCentrifugeByCode(resinfo.CenCode);
//seque.AddAction(MoveTo.create(cendev, 30000, -1, -1, 0));
//seque.AddAction(InitXyz.create(cendev, 30000, false, false, true));
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque);
}
put_gel.HatchCurTime = 0;
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque);
seque.runAction(handDevice);
}
}
}
break;
case ActionPointType.Centrifugal:
{
if (resinfo.Purpose != "lxj" && !(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
foreach (var seat in resmanager.centrifuge_list)
{
CentrifugeMDevice cendev = cenMrg.GetCentrifugeByCode(seat.Code);
if (seat.Status == 1 && cendev != null)
{
bool iscanputcen = IsCanPutCen(cendev);
var seque = Sequence.create();
var put_seat = resmanager.GetResByCode("null", "T_BJ_Centrifuge", cendev.Centrifugem.Code.SetValue);
if (iscanputcen == false)
{
put_seat = null;
}
if (put_seat == null && resinfo.Purpose != "3")
{
put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "3");
}
if (put_seat != null)
{
var spaw = Spawn.create();
var put_seque = Sequence.create();
var put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref put_seque);
spaw.AddAction(put_seque);
seque.AddAction(spaw);
if (put_seat.Purpose == "lxj")
{
spaw.AddAction(MoveTo.create(cendev, 30001, -1, -1, put_seat.CenGelP[put_seat.CountX]));
generater.GeneratePutGelToCent(cendev.Centrifugem.Code.SetValue, put_seat, put_gel, ref seque);
}
else
{
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque);
}
seque.runAction(handDevice);
break;
}
}
}
}
}
break;
case ActionPointType.PutPeiGelBack:
{
var seque = Sequence.create();
var put_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "2");
if (put_seat != null && resinfo.Purpose == "lxj")
{
//CentrifugeMDevice cendev = cenMrg.GetCentrifugeByCode(resinfo.CenCode);
//seque.AddAction(MoveTo.create(cendev, 30000, -1, -1, 0));
//seque.AddAction(InitXyz.create(cendev, 30000, false, false, true));
var put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque);
generater.GeneratePutGelToNormal(put_seat, put_gel, ref seque);
seque.AddAction(SkCallBackFun.create((ActionBase acttem) => {
resinfo.RemoveActionAt(0);
return(true);
}));
seque.runAction(handDevice);
}
}
break;
case ActionPointType.Camera:
{
var seque = Sequence.create();
var put_seat = resmanager.GetResByCode("", "T_BJ_Camera");
var wasted_seat = resmanager.GetResByCode("", "T_BJ_WastedSeat");
if (put_seat != null && wasted_seat != null && !(resinfo.Purpose == "4" && actionmanager.getAllActionsCount(piercerDevice) != 0))
{
ResInfoData put_gel = null;
if (resinfo.Purpose == "lxj")
{
//CentrifugeMDevice cendev = cenMrg.GetCentrifugeByCode(resinfo.CenCode);
//seque.AddAction(MoveTo.create(cendev, 30000, -1, -1, 0));
//seque.AddAction(InitXyz.create(cendev, 30000, false, false, true));
put_gel = generater.GenerateTakeGelFromCent(resinfo, resinfo.CenCode, ref seque);
}
else
{
put_gel = generater.GenerateTakeGelFromNormal(resinfo, ref seque);
}
seque.AddAction(MoveTo.create(handDevice, 3000, -1, -1, 0));
seque.AddAction(MoveTo.create(handDevice, 3000, (int)put_seat.X, (int)(put_seat.Y), -1));
seque.AddAction(MoveTo.create(handDevice, 3000, -1, -1, (int)(put_seat.Z)));
//拍照分析
seque.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
bool result = true;
if (cameraDevice.IsOpen == false)
{
result = cameraDevice.Open();
}
var bm = cameraDevice.CaptureImage();
var bag = new TestBag(Common.Enums.TestLevelEnum.Normal);
var gel = new Gel(resinfo.GetGelMask());
bag.GelType = resinfo.gel;
bag.Add(resinfo.GetSampleBarcode(), (byte)resinfo.GetSampleRackIndex(), (byte)resinfo.CountX);
bag.SetStartTime(resinfo.StartTime);
gel.SampleBarcodes.Add(resinfo.GetSampleBarcode());
cameraDevice.Save(bag, gel, bm, "888");
//cameraDevice.Close();
put_gel.RemoveActionAt(0);
return(true);
}));
seque.AddAction(MoveTo.create(handDevice, 3000, (int)wasted_seat.X, (int)(wasted_seat.Y)));
seque.AddAction(HandPutCard.create(handDevice, 3000, (int)wasted_seat.ZPut, 0));
seque.runAction(handDevice);
}
}
break;
}
}
public void Logic(double dt)
{
lock (mylock)
{
if (action_tree.Count == 0)
{
return;
}
//机器手空闲回零
if (actionmanager.getAllActionsCount(injectorDevice) == 0 && injectorDevice.Injector.XMotor.CurrentDistance != 0)
{
inj_wait_time += dt;
if (inj_wait_time > 1000)
{
var act = Sequence.create(
InjectMoveTo.create(injectorDevice, 3000, injectorDevice.GetSeleteced(), -1, IMask.Gen(-1), IMask.Gen(0)),
InjectMoveTo.create(injectorDevice, 3000, injectorDevice.GetSeleteced(), 0, IMask.Gen(0), IMask.Gen(-1)),
InitXyz.create(injectorDevice, 10000, injectorDevice.GetSeleteced(), true, true, true));
act.runAction(injectorDevice);
inj_wait_time = 0;
}
}
var act_group = action_tree[0];
if (act_group.Count != 0 && act_group[0].State == 0)
{
var seque_act = Sequence.create();
AbstractCanDevice device = null;
if (act_group[0].InjectCount != 0)
{
foreach (var act_tem in act_group)
{
resmanager.tip_count += act_tem.InjectCount;
}
device = injectorDevice;
foreach (var act in act_group)
{
act.UpdataPoints();
}
seque_act = generater.GenerateAction(act_group);
}
else
{
foreach (var act in act_group)
{
act.UpdataPoints();
switch (act.StepClass)
{
case TestStepEnum.LoadGel:
{
device = handDevice;
var paper_seat = resmanager.GetResByCode("null", "T_BJ_GelSeat", "", "4");
//var ware_seat = resmanager.GetResByCode(act.GetGelMask(), "T_BJ_GelWarehouse");
seque_act.AddAction(HandTakeGelFromWare.create(handDevice, 3001, gelwareDevice, act.GelMaskID, act.GetGelMask(), act.SampleBarCode));
seque_act.AddAction(HandPutGelToNormal.create(handDevice, 3001, gelwareDevice, paper_seat));
}
break;
case TestStepEnum.KaiKongGel:
{
int handrx = 0;
var device_hand = new ActionDevice(handDevice);
var paper_seat = resmanager.GetResByCode(act.GetGelMask(), "T_BJ_GelSeat", "", "4");
if (paper_seat != null && device_hand.GetRealX(ref handrx) &&
(handrx + 1000) < paper_seat.X && ActionDevice.hand_tx < paper_seat.X)
{
device = piercerDevice;
seque_act.AddAction(PaperCard.create(piercerDevice, 3000, paper_seat));
seque_act.AddAction(SkCallBackFun.create((ActionBase acttem) => {
resmanager.gel_count++;
return(true);
}));
}
else
{
return;
}
}
break;
case TestStepEnum.JYJS:
{
device = injectorDevice;
//得到剩下动作
List <T_GelStep> act_list = new List <T_GelStep>();
foreach (var act_tem in action_tree)
{
if (act_tem.Count == 1 && act_tem[0].StepClass != TestStepEnum.GELEND)
{
act_tem[0].State = 2;
act_list.Add(act_tem[0]);
}
else
{
break;
}
}
act_list.Remove(act);
var actplist = ActionPoint.GenActList(act_list);
var paper_seat = resmanager.GetResByCode(act.GetGelMask(), "T_BJ_GelSeat", "", "4");
foreach (var actp in actplist)
{
paper_seat.ActionList.Add(actp.type);
if (actp.hatchtime != 0)
{
paper_seat.HatchTime = actp.hatchtime;
}
}
seque_act.AddAction(SkCallBackFun.create((ActionBase acttem) =>
{
paper_seat.InjectFinish = true;
return(true);
}));
}
break;
}
}
}
if (device != null)
{
seque_act.AddAction(SkCallBackFun.create((ActionBase act) =>
{
act_group[0].State = 2;
return(true);
}));
act_group[0].State = 1;
seque_act.runAction(device);
}
else
{
act_group[0].State = 2;
}
}
}
}
