public NpgsqlParameterStatus(Stream stream, ByteBuffer queue)
{
//Read message length
PGUtil.EatStreamBytes(stream, 4);
Parameter = PGUtil.ReadString(stream, queue);
ParameterValue = PGUtil.ReadString(stream, queue);
}
public FieldData(Stream stream, NpgsqlBackendTypeMapping typeMapping, byte[] buffer, ByteBuffer queue)
{
Name = PGUtil.ReadString(stream, queue);
TableOID = PGUtil.ReadInt32(stream, buffer);
ColumnAttributeNumber = PGUtil.ReadInt16(stream, buffer);
TypeOID = PGUtil.ReadInt32(stream, buffer);
TypeInfo = typeMapping[TypeOID];
TypeSize = PGUtil.ReadInt16(stream, buffer);
TypeModifier = PGUtil.ReadInt32(stream, buffer);
FormatCode = (FormatCode)PGUtil.ReadInt16(stream, buffer);
}
protected IEnumerable <IServerResponseObject> ProcessBackendResponses_Ver_3(NpgsqlConnector context)
{
try
{
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
var buffer = context.TmpBuffer;
var queue = context.ArrayBuffer;
List <NpgsqlError> errors = null;
SCRAM scram = null;
for (; ;)
{
// Check the first Byte of response.
BackEndMessageCode message = (BackEndMessageCode)stream.ReadByte();
switch (message)
{
case BackEndMessageCode.ErrorResponse:
NpgsqlError error = new NpgsqlError(stream, buffer, queue);
error.ErrorSql = mediator.SqlSent;
if (errors == null)
{
errors = new List <NpgsqlError>();
}
errors.Add(error);
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!context.RequireReadyForQuery)
{
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.AuthenticationRequest:
// Get the length in case we're getting AuthenticationGSSContinue
int authDataLength = PGUtil.ReadInt32(stream, buffer) - 8;
AuthenticationRequestType authType = (AuthenticationRequestType)PGUtil.ReadInt32(stream, buffer);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
break;
case AuthenticationRequestType.AuthenticationClearTextPassword:
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
case AuthenticationRequestType.AuthenticationMD5Password:
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Password;
byte[] saltUserName = ENCODING_UTF8.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = ENCODING_UTF8.GetBytes(prehash);
crypt_buf = new byte[prehashbytes.Length + 4];
stream.Read(crypt_buf, prehashbytes.Length, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
prehashbytes.CopyTo(crypt_buf, 0);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(ENCODING_UTF8.GetBytes(sb.ToString()));
break;
#if WINDOWS && UNMANAGED
case AuthenticationRequestType.AuthenticationSSPI:
{
if (context.IntegratedSecurity)
{
// For SSPI we have to get the IP-Address (hostname doesn't work)
string ipAddressString = ((IPEndPoint)context.Socket.RemoteEndPoint).Address.ToString();
context.SSPI = new SSPIHandler(ipAddressString, "POSTGRES");
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.SSPI.Continue(null));
break;
}
else
{
// TODO: correct exception
throw new Exception();
}
}
case AuthenticationRequestType.AuthenticationGSSContinue:
{
byte[] authData = new byte[authDataLength];
PGUtil.CheckedStreamRead(stream, authData, 0, authDataLength);
byte[] passwd_read = context.SSPI.Continue(authData);
if (passwd_read.Length != 0)
{
context.Authenticate(passwd_read);
}
break;
}
#endif
case AuthenticationRequestType.AuthenticationSASL:
var saslAuthMechanism = PGUtil.ReadString(stream, queue);
if (saslAuthMechanism == "SCRAM-SHA-256")
{
stream.ReadByte();
scram = new SCRAM(saslAuthMechanism, context.UserName);
stream.WriteByte((byte)FrontEndMessageCode.SASL);
var schemeBytes = Encoding.UTF8.GetBytes(scram.Scheme);
var clientFirstMessageBytes = Encoding.UTF8.GetBytes(scram.getClientFirstMessage());
PGUtil.WriteInt32(stream, 9 + schemeBytes.Length + clientFirstMessageBytes.Length);
stream.Write(schemeBytes, 0, schemeBytes.Length);
stream.WriteByte(0);
PGUtil.WriteInt32(stream, clientFirstMessageBytes.Length);
stream.Write(clientFirstMessageBytes, 0, clientFirstMessageBytes.Length);
stream.Flush();
}
else
{
throw new NpgsqlException("Only Scram SHA 256 is supported");
}
break;
case AuthenticationRequestType.AuthenticationSASLContinue:
if (scram == null)
{
throw new NpgsqlException("Invalid authentication message");
}
var continueData = new byte[authDataLength];
PGUtil.CheckedStreamRead(stream, continueData, 0, authDataLength);
scram.parseServerFirstMessage(Encoding.UTF8.GetString(continueData));
scram.Password = Encoding.UTF8.GetString(context.Password);
var mesageBytes = Encoding.UTF8.GetBytes(scram.getClientFinalMessage());
stream.WriteByte((byte)FrontEndMessageCode.SASL);
PGUtil.WriteInt32(stream, 4 + mesageBytes.Length);
stream.Write(mesageBytes, 0, mesageBytes.Length);
stream.Flush();
break;
case AuthenticationRequestType.AuthenticationSASLFinal:
if (scram == null)
{
throw new NpgsqlException("Invalid authentication message");
}
var finalData = new byte[authDataLength];
PGUtil.CheckedStreamRead(stream, finalData, 0, authDataLength);
scram.verifyServerSignature(Encoding.UTF8.GetString(finalData));
break;
default:
// Only AuthenticationClearTextPassword, AuthenticationMD5Password and AuthenticationSASL supported for now.
if (errors == null)
{
errors = new List <NpgsqlError>();
}
errors.Add(
new NpgsqlError(String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.RowDescription:
yield return(context.RowDescription());
break;
case BackEndMessageCode.ParameterDescription:
// Do nothing,for instance, just read...
int length = PGUtil.ReadInt32(stream, buffer);
int nb_param = PGUtil.ReadInt16(stream, buffer);
//WTF
for (int i = 0; i < nb_param; i++)
{
int typeoid = PGUtil.ReadInt32(stream, buffer);
}
break;
case BackEndMessageCode.DataRow:
yield return(context.NextRow());
break;
case BackEndMessageCode.ReadyForQuery:
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
PGUtil.ReadInt32(stream, buffer);
stream.ReadByte();
ChangeState(context, NpgsqlReadyState.Instance);
if (errors != null)
{
throw new NpgsqlException(errors);
}
yield break;
case BackEndMessageCode.BackendKeyData:
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(stream, buffer);
context.BackEndKeyData = backend_keydata;
// Wait for ReadForQuery message
break;
case BackEndMessageCode.NoticeResponse:
// Notices and errors are identical except that we
// just throw notices away completely ignored.
context.FireNotice(new NpgsqlError(stream, buffer, queue));
break;
case BackEndMessageCode.CompletedResponse:
PGUtil.ReadInt32(stream, buffer);
yield return(new CompletedResponse(stream, queue));
break;
case BackEndMessageCode.ParseComplete:
// Just read up the message length.
PGUtil.ReadInt32(stream, buffer);
yield break;
case BackEndMessageCode.BindComplete:
// Just read up the message length.
PGUtil.ReadInt32(stream, buffer);
yield break;
case BackEndMessageCode.EmptyQueryResponse:
PGUtil.ReadInt32(stream, buffer);
break;
case BackEndMessageCode.NotificationResponse:
// Eat the length
PGUtil.ReadInt32(stream, buffer);
context.FireNotification(new NpgsqlNotificationEventArgs(stream, true, buffer, queue));
if (context.IsNotificationThreadRunning)
{
yield break;
}
break;
case BackEndMessageCode.ParameterStatus:
NpgsqlParameterStatus parameterStatus = new NpgsqlParameterStatus(stream, queue);
context.AddParameterStatus(parameterStatus);
if (parameterStatus.Parameter == "server_version")
{
// Deal with this here so that if there are
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
string versionString = parameterStatus.ParameterValue.Trim();
for (int idx = 0; idx != versionString.Length; ++idx)
{
char c = parameterStatus.ParameterValue[idx];
if (!char.IsDigit(c) && c != '.')
{
versionString = versionString.Substring(0, idx);
break;
}
}
context.ServerVersion = new Version(versionString);
}
break;
case BackEndMessageCode.NoData:
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
PGUtil.ReadInt32(stream, buffer);
break;
case BackEndMessageCode.CopyInResponse:
// Enter COPY sub protocol and start pushing data to server
ChangeState(context, NpgsqlCopyInState.Instance);
PGUtil.ReadInt32(stream, buffer); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream, buffer));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyOutResponse:
// Enter COPY sub protocol and start pulling data from server
ChangeState(context, NpgsqlCopyOutState.Instance);
PGUtil.ReadInt32(stream, buffer); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream, buffer));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyData:
Int32 len = PGUtil.ReadInt32(stream, buffer) - 4;
byte[] buf = new byte[len];
PGUtil.ReadBytes(stream, buf, 0, len);
context.Mediator.ReceivedCopyData = buf;
yield break; // read data from server one chunk at a time while staying in copy operation mode
case BackEndMessageCode.CopyDone:
PGUtil.ReadInt32(stream, buffer); // CopyDone can not have content so this is always 4
// This will be followed by normal CommandComplete + ReadyForQuery so no op needed
break;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throwing an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char)message));
}
}
}
finally
{
context.RequireReadyForQuery = true;
}
}
internal NpgsqlError(Stream stream, byte[] buffer, ByteBuffer queue)
{
// Check the messageLength value. If it is 1178686529, this would be the
// "FATA" string, which would mean a protocol 2.0 error string.
if (PGUtil.ReadInt32(stream, buffer) == 1178686529)
{
string[] v2Parts = ("FATA" + PGUtil.ReadString(stream, queue)).Split(new char[] { ':' }, 2);
if (v2Parts.Length == 2)
{
_severity = v2Parts[0].Trim();
_message = v2Parts[1].Trim();
}
else
{
_severity = string.Empty;
_message = v2Parts[0].Trim();
}
}
else
{
for (char field = (char)stream.ReadByte(); field != 0; field = (char)stream.ReadByte())
{
switch (field)
{
case 'S':
_severity = PGUtil.ReadString(stream, queue);
break;
case 'C':
_code = PGUtil.ReadString(stream, queue);
break;
case 'M':
_message = PGUtil.ReadString(stream, queue);
break;
case 'D':
_detail = PGUtil.ReadString(stream, queue);
break;
case 'H':
_hint = PGUtil.ReadString(stream, queue);
break;
case 'P':
_position = PGUtil.ReadString(stream, queue);
break;
case 'p':
_internalPosition = PGUtil.ReadString(stream, queue);
break;
case 'q':
_internalQuery = PGUtil.ReadString(stream, queue);
break;
case 'W':
_where = PGUtil.ReadString(stream, queue);
break;
case 'F':
_file = PGUtil.ReadString(stream, queue);
break;
case 'L':
_line = PGUtil.ReadString(stream, queue);
break;
case 'R':
_routine = PGUtil.ReadString(stream, queue);
break;
case 's':
_schemaName = PGUtil.ReadString(stream, queue);
break;
case 't':
_tableName = PGUtil.ReadString(stream, queue);
break;
case 'c':
_columnName = PGUtil.ReadString(stream, queue);
break;
case 'd':
_datatypeName = PGUtil.ReadString(stream, queue);
break;
case 'n':
_constraintName = PGUtil.ReadString(stream, queue);
break;
default:
// Unknown error field; consume and discard.
PGUtil.ReadString(stream, queue);
break;
}
}
}
}
internal NpgsqlNotificationEventArgs(Stream stream, bool readAdditional, byte[] buffer, ByteBuffer queue)
{
PID = PGUtil.ReadInt32(stream, buffer);
Condition = PGUtil.ReadString(stream, queue);
AdditionalInformation = readAdditional ? PGUtil.ReadString(stream, queue) : string.Empty;
}