public Main()
{
repetierKey = Registry.CurrentUser.CreateSubKey("Software\\Repetier");
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
threeDSettings = new ThreeDSettings();
InitializeComponent();
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel1.Controls.Add(printPanel);
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitVert.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey,true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
printPreview = new ThreeDControl();
printPreview.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.AutoUpdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printPreview.models.AddLast(printVisual);
basicTitle = Text;
}
/// <summary>
/// Checks the state of the object.
/// If it is outside print are it starts pulsing
/// </summary>
public void updateSTLState(STL stl)
{
FormPrinterSettings ps = Main.printerSettings;
stl.UpdateBoundingBox();
if (!ps.PointInside(stl.xMin, stl.yMin, stl.zMin) ||
!ps.PointInside(stl.xMax, stl.yMin, stl.zMin) ||
!ps.PointInside(stl.xMin, stl.yMax, stl.zMin) ||
!ps.PointInside(stl.xMax, stl.yMax, stl.zMin) ||
!ps.PointInside(stl.xMin, stl.yMin, stl.zMax) ||
!ps.PointInside(stl.xMax, stl.yMin, stl.zMax) ||
!ps.PointInside(stl.xMin, stl.yMax, stl.zMax) ||
!ps.PointInside(stl.xMax, stl.yMax, stl.zMax))
{
stl.outside = true;
if (Main.threeDSettings.pulseOutside.Checked && !stl.hasAnimationWithName("pulse"))
{
stl.addAnimation(new PulseAnimation("pulse", 0.03, 0.03, 0.03, 0.3));
}
}
else
{
stl.outside = false;
stl.removeAnimationWithName("pulse");
}
}
public FormPrinterSettingsSimple(FormPrinterSettings _printerSettings)
{
InitializeComponent();
printerSettings = _printerSettings;
SyncPortComboBox();
Main.main.languageChanged += translate;
translate();
}
/// <summary>
/// Initialize the Form that lets the user setup the parameters of the Printer.
/// </summary>
public FormPrinterSettings()
{
ps = this;
InitializeComponent();
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.connection;
conToForm();
comboPrinter.Items.Clear();
foreach (string s in printerKey.GetSubKeyNames())
{
comboPrinter.Items.Add(s);
// this.printerSettingsSimple.comboPrinter.Items.Add(s);
}
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
if (Custom.GetBool("simpleConnectionsConfig", false))
{
comboParity.Visible = false;
comboStopbits.Visible = false;
labelStopbits.Visible = false;
labelParity.Visible = false;
}
/* if (Custom.GetBool("noDisposeArea", false))
* {
* labelDumpAreaDepth.Visible = false;
* labelDumpAreaFront.Visible = false;
* labelDumpAreaLeft.Visible = false;
* labelDumpAreaWidth.Visible = false;
* labelDumpUnit1.Visible = false;
* labelDumpUnit2.Visible = false;
* labelDumpUnit3.Visible = false;
* labelDumpUnit4.Visible = false;
* checkHasDumpArea.Visible = false;
* textDumpAreaDepth.Visible = false;
* textDumpAreaFront.Visible = false;
* textDumpAreaLeft.Visible = false;
* textDumpAreaWidth.Visible = false;
* }*/
printerSettingsSimple = new FormPrinterSettingsSimple(this);
Main.main.languageChanged += translate;
translate();
}
public FormPrinterSettings()
{
ps = this;
InitializeComponent();
addConnector(new SerialConnector());
addConnector(new VirtualPrinterConnector());
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
/*bindingConnectors.DataSource = connectors;
* comboConnector.DataSource = bindingConnectors.DataSource;
* comboConnector.DisplayMember = "Name";
* comboConnector.ValueMember = "Id";*/
foreach (string s in printerKey.GetSubKeyNames())
{
comboPrinter.Items.Add(s);
}
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
/* if (Custom.GetBool("noDisposeArea", false))
* {
* labelDumpAreaDepth.Visible = false;
* labelDumpAreaFront.Visible = false;
* labelDumpAreaLeft.Visible = false;
* labelDumpAreaWidth.Visible = false;
* labelDumpUnit1.Visible = false;
* labelDumpUnit2.Visible = false;
* labelDumpUnit3.Visible = false;
* labelDumpUnit4.Visible = false;
* checkHasDumpArea.Visible = false;
* textDumpAreaDepth.Visible = false;
* textDumpAreaFront.Visible = false;
* textDumpAreaLeft.Visible = false;
* textDumpAreaWidth.Visible = false;
* }*/
Main.main.languageChanged += translate;
translate();
}
public FormPrinterSettings()
{
ps = this;
InitializeComponent();
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
foreach (string s in printerKey.GetSubKeyNames())
comboPrinter.Items.Add(s);
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
if (Custom.GetBool("simpleConnectionsConfig", false))
{
comboParity.Visible = false;
comboStopbits.Visible = false;
labelStopbits.Visible = false;
labelParity.Visible = false;
}
/* if (Custom.GetBool("noDisposeArea", false))
{
labelDumpAreaDepth.Visible = false;
labelDumpAreaFront.Visible = false;
labelDumpAreaLeft.Visible = false;
labelDumpAreaWidth.Visible = false;
labelDumpUnit1.Visible = false;
labelDumpUnit2.Visible = false;
labelDumpUnit3.Visible = false;
labelDumpUnit4.Visible = false;
checkHasDumpArea.Visible = false;
textDumpAreaDepth.Visible = false;
textDumpAreaFront.Visible = false;
textDumpAreaLeft.Visible = false;
textDumpAreaWidth.Visible = false;
}*/
Main.main.languageChanged += translate;
translate();
}
/// <summary>
/// Checks the state of the object.
/// If it is outside print are it starts pulsing
/// </summary>
public void updateSTLState(STL stl)
{
FormPrinterSettings ps = Main.printerSettings;
stl.UpdateBoundingBox();
if (stl.xMin < ps.BedLeft || stl.yMin < ps.BedFront || stl.zMin < -0.001 || stl.xMax > ps.BedLeft + Main.printerSettings.PrintAreaWidth ||
stl.yMax > ps.BedFront + Main.printerSettings.PrintAreaDepth || stl.zMax > Main.printerSettings.PrintAreaHeight)
{
stl.outside = true;
if (Main.threeDSettings.pulseOutside.Checked && !stl.hasAnimationWithName("pulse"))
{
stl.addAnimation(new PulseAnimation("pulse", 0.03, 0.03, 0.03, 0.3));
}
}
else
{
stl.outside = false;
stl.removeAnimationWithName("pulse");
}
}
public FormPrinterSettings()
{
ps = this;
connectors.Add(new SerialConnector());
connectors.Add(new VirtualPrinterConnector());
InitializeComponent();
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
bindingConnectors.DataSource = connectors;
comboConnector.DataSource = bindingConnectors.DataSource;
comboConnector.DisplayMember = "Name";
comboConnector.ValueMember = "Id";
foreach (string s in printerKey.GetSubKeyNames())
comboPrinter.Items.Add(s);
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
/* if (Custom.GetBool("noDisposeArea", false))
{
labelDumpAreaDepth.Visible = false;
labelDumpAreaFront.Visible = false;
labelDumpAreaLeft.Visible = false;
labelDumpAreaWidth.Visible = false;
labelDumpUnit1.Visible = false;
labelDumpUnit2.Visible = false;
labelDumpUnit3.Visible = false;
labelDumpUnit4.Visible = false;
checkHasDumpArea.Visible = false;
textDumpAreaDepth.Visible = false;
textDumpAreaFront.Visible = false;
textDumpAreaLeft.Visible = false;
textDumpAreaWidth.Visible = false;
}*/
Main.main.languageChanged += translate;
translate();
}
public void Autoposition()
{
if (autosizeFailed)
{
return;
}
RectPacker packer = new RectPacker(1, 1);
int border = 3;
FormPrinterSettings ps = Main.printerSettings;
float maxW = ps.PrintAreaWidth;
float maxH = ps.PrintAreaDepth;
float xOff = ps.BedLeft, yOff = ps.BedFront;
if (ps.printerType == 1)
{
if (ps.DumpAreaFront <= 0)
{
yOff = ps.BedFront + ps.DumpAreaDepth - ps.DumpAreaFront;
maxH -= yOff;
}
else if (ps.DumpAreaDepth + ps.DumpAreaFront >= maxH)
{
yOff = ps.BedFront + -(maxH - ps.DumpAreaFront);
maxH += yOff;
}
else if (ps.DumpAreaLeft <= 0)
{
xOff = ps.BedLeft + ps.DumpAreaWidth - ps.DumpAreaLeft;
maxW -= xOff;
}
else if (ps.DumpAreaWidth + ps.DumpAreaLeft >= maxW)
{
xOff = ps.BedLeft + maxW - ps.DumpAreaLeft;
maxW += xOff;
}
}
foreach (STL stl in listSTLObjects.Items)
{
int w = 2 * border + (int)Math.Ceiling(stl.xMax - stl.xMin);
int h = 2 * border + (int)Math.Ceiling(stl.yMax - stl.yMin);
if (!packer.addAtEmptySpotAutoGrow(new PackerRect(0, 0, w, h, stl), (int)maxW, (int)maxH))
{
autosizeFailed = true;
}
}
if (autosizeFailed)
{
MessageBox.Show("Too many objects on printer bed for automatic packing.\r\nPacking disabled until elements are removed.",
"Printer bed full", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
float xAdd = (maxW - packer.w) / 2.0f;
float yAdd = (maxH - packer.h) / 2.0f;
foreach (PackerRect rect in packer.vRects)
{
STL s = (STL)rect.obj;
float xPos = xOff + xAdd + rect.x + border;
float yPos = yOff + yAdd + rect.y + border;
s.Position.x += xPos - s.xMin;
s.Position.y += yPos - s.yMin;
s.UpdateBoundingBox();
}
Main.main.threedview.UpdateChanges();
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
if (IsMono)
{
if (!IsMac)
{
splitContainerPrinterGraphic.SplitterDistance += 52;
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
splitJob.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
toolShowLog.Checked = RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel1.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
printPreview = new ThreeDControl();
printPreview.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.AutoUpdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDControl();
jobPreview.Dock = DockStyle.Fill;
splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
if (IsMac)
{
tabGCode.Controls.Remove(splitJob);
tabPrint.Controls.Remove(splitContainerPrinterGraphic);
}
toolShowLog_CheckedChanged(null, null);
updateShowFilament();
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
showWorkdirectoryToolStripMenuItem.Visible = false;
new SoundConfig();
stlComposer1.buttonSlice.Text = "Slice with " + slicer.SlicerName;
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
if (titleAdd.Length > 0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
SplashScreen.run();
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
printerModel = new PrinterModel();
conn.analyzer.start(true);
threeDSettings = new ThreeDSettings();
InitializeComponent();
tdSettings.DataSource = threeDSettings;
tdSettings_DataMemberChanged(null, null);
editor = new RepetierEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
splitPrinterId.Panel1Collapsed = !RegMemory.GetBool("printerIdShow", false);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
objectPlacement = new STLComposer();
objectPlacement.Dock = DockStyle.Fill;
tabModel.Controls.Add(objectPlacement);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
{
showWorkdirectoryToolStripMenuItem.Visible = false;
toolStrip.Height = 56;
}
new SoundConfig();
//stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
string titlePrefix = Custom.GetString("titlePrefix", "");
if (titleAdd.Length > 0 || titlePrefix.Length>0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = titlePrefix+basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language,null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
if (Custom.GetBool("removeSkeinforge", false))
{
Main.slicer.ActiveSlicer = Slicer.SlicerID.Slic3r;
}
if (Custom.GetBool("extraSupportButton", false))
{
supportToolStripMenuItem.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripAskSeperator.Visible = false;
supportToolStripMenuItem.Visible = false;
}
if (Custom.GetString("extraLink1Title", "").Length>0)
{
extraUrl1ToolStripMenuItem.Text = Custom.GetString("extraLink1Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl1ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink2Title", "").Length > 0)
{
extraUrl2ToolStripMenuItem.Text = Custom.GetString("extraLink2Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl2ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink3Title", "").Length > 0)
{
extraUrl3ToolStripMenuItem.Text = Custom.GetString("extraLink3Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl3ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink4Title", "").Length > 0)
{
extraUrl4ToolStripMenuItem.Text = Custom.GetString("extraLink4Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl4ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink5Title", "").Length > 0)
{
extraUrl5ToolStripMenuItem.Text = Custom.GetString("extraLink5Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl5ToolStripMenuItem.Visible = false;
string supportImage = Custom.GetString("extraSupportToolbarImage", "");
if (supportImage.Length > 0 && File.Exists(Application.StartupPath + Path.DirectorySeparatorChar + supportImage))
{
toolStripButtonSupport.Image = Image.FromFile(Application.StartupPath + Path.DirectorySeparatorChar + Custom.GetString("extraSupportToolbarImage", ""));
toolStripButtonSupport.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripButtonSupport.Visible = false;
}
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
updateTravelMoves();
printerIdLabel.Text = printerSettings.comboPrinter.Text;
this.AllowDrop = true;
this.DragEnter += new DragEventHandler(Form1_DragEnter);
this.DragDrop += new DragEventHandler(Form1_DragDrop);
extensions.ExtensionManager.Initalize();
if (conn.connector != null)
conn.connector.Activate();
//TestTopoTriangle triTests = new TestTopoTriangle();
//triTests.RunTests();
//everything done. Now look at command line
ProcessCommandLine();
snapshotToolStripMenuItem.Visible = false;
setImportUnits(RegMemory.GetDouble("importScaleFactor", importScaleFactor));
}
/// <summary>
/// Runs the slicer
/// </summary>
/// <param name="file">path to .stl file to slice</param>
/// <param name="centerx"></param>
/// <param name="centery"></param>
/// <returns></returns>
public bool RunSliceNew(string file, float centerx, float centery)
{
// check to make sure the slicer isn't still running from last time
if (procConvert != null)
{
MessageBox.Show(Trans.T("L_LAST_SLICE_RUNNING"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return(false);
}
// Make sure we have the path to the slicer and it is valid
string exe = findSlic3rExecutable();
if (exe == null)
{
MessageBox.Show(Trans.T("L_SLIC3R_NOT_FOUND"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return(false);
}
// Get the print settings and add the information to the slicing info panal. Analyze the .stl
FormPrinterSettings ps = Main.printerSettings;
SlicingInfo.Start("Slic3r");
SlicingInfo.SetAction(Trans.T("L_ANALYSING_STL"));
try
{
STL stl = new STL();
stl.Load(file);
stl.UpdateBoundingBox();
if (stl.xMin > ps.BedLeft && stl.yMin > ps.BedFront && stl.xMax < ps.BedLeft + ps.PrintAreaWidth && stl.yMax < ps.BedFront + ps.PrintAreaDepth)
{
// User assigned valid position, so we use this
centerx = stl.xMin + (stl.xMax - stl.xMin) / 2;
centery = stl.yMin + (stl.yMax - stl.yMin) / 2;
}
stl.Clear();
}
catch (Exception e)
{
Main.connection.log(e.ToString(), false, 2);
SlicingInfo.Stop();
return(false);
}
SlicingInfo.SetAction(Trans.T("L_SLICING_STL"));
string dir = Main.globalSettings.Workdir;
string config = dir + Path.DirectorySeparatorChar + "slic3r.ini";
// Problem is somewhere here. If I uncomment the next line and get rid of the other cdir declaration than it doesn't work. But as it is right now, it won't read the
// ini files.
string cdir = Main.main.slicerPanel.slic3rDirectory;
//string cdir = dir;
IniFile ini = new IniFile();
//BasicConfiguration b = BasicConfiguration.basicConf;
string fPrinter = cdir + Path.DirectorySeparatorChar + "print" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rPrint + ".ini";
ini.read(fPrinter);
IniFile ini2 = new IniFile();
ini2.read(cdir + Path.DirectorySeparatorChar + "printer" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rPrinter + ".ini");
IniFile ini3 = new IniFile();
ini3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament1 + ".ini");
// IniFile ini3_2 = new IniFile();
//if(Main.conn.numberExtruder>1)
// ini3_2.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament2 + ".ini");
//IniFile ini3_3 = new IniFile();
//if (Main.conn.numberExtruder > 2)
// ini3_3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament3 + ".ini");
//if (Main.conn.numberExtruder > 1)
// ini3.merge(ini3_2);
//if (Main.conn.numberExtruder > 2)
// ini3.merge(ini3_3);
ini.add(ini2);
ini.add(ini3);
// If we are in developer mode then don't add support or rafts or calibrate the height
if (!Main.main.DeveloperMode)
{
ini.AddSupportandRaft();
ini.CalibrateHeight();
}
ini.flatten();
ini.write(config);
procConvert = new Process();
try
{
string basedir = (string)Main.main.repetierKey.GetValue("installPath", "");
/*string exname = "slic3r.exe";
* if (Environment.OSVersion.Platform == PlatformID.Unix)
* exname = "slic3r.pl";
* if (Main.IsMac)
* exname = "MacOS" + Path.DirectorySeparatorChar + "slic3r";
* string exe = basedir + Path.DirectorySeparatorChar + "Slic3r" + Path.DirectorySeparatorChar + exname;
* if (File.Exists(BasicConfiguration.basicConf.Slic3rExecutable))
* exe = BasicConfiguration.basicConf.Slic3rExecutable;*/
slicefile = file; // TODO: Not needed??
string target = StlToGCode(file);
if (File.Exists(target))
{
File.Delete(target);
}
procConvert.EnableRaisingEvents = true;
procConvert.Exited += new EventHandler(ConversionExited);
procConvert.StartInfo.FileName = Main.IsMono ? exe : wrapQuotes(exe);
StringBuilder sb = new StringBuilder();
sb.Append("--load ");
sb.Append(wrapQuotes(config));
sb.Append(" --print-center ");
sb.Append(centerx.ToString("0", GCode.format));
sb.Append(",");
sb.Append(centery.ToString("0", GCode.format));
sb.Append(" -o ");
sb.Append(wrapQuotes(StlToGCode(file)));
sb.Append(" ");
sb.Append(wrapQuotes(file));
procConvert.StartInfo.Arguments = sb.ToString();
procConvert.StartInfo.UseShellExecute = false;
procConvert.StartInfo.RedirectStandardOutput = true;
procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.StartInfo.RedirectStandardError = true;
procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.Start();
// Start the asynchronous read of the standard output stream.
procConvert.BeginOutputReadLine();
procConvert.BeginErrorReadLine();
//Main.main.tab.SelectedTab = Main.main.tabPrint;
}
catch (Exception e)
{
Main.connection.log(e.ToString(), false, 2);
}
return(true);
}
public bool RunSliceNew(string file, float centerx, float centery)
{
if (procConvert != null)
{
MessageBox.Show(Trans.T("L_LAST_SLICE_RUNNING"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return(false);
}
string exe = findSlic3rExecutable();
if (exe == null)
{
MessageBox.Show(Trans.T("L_SLIC3R_NOT_FOUND"), Trans.T("L_ERROR"), MessageBoxButtons.OK, MessageBoxIcon.Error);
return(false);
}
FormPrinterSettings ps = Main.printerSettings;
SlicingInfo.Start("Slic3r");
SlicingInfo.SetAction(Trans.T("L_ANALYSING_STL"));
try
{
STL stl = new STL();
stl.Load(file);
stl.UpdateBoundingBox();
if (stl.xMin > ps.BedLeft && stl.yMin > ps.BedFront && stl.xMax < ps.BedLeft + ps.PrintAreaWidth && stl.yMax < ps.BedFront + ps.PrintAreaDepth)
{
// User assigned valid position, so we use this
centerx = stl.xMin + (stl.xMax - stl.xMin) / 2;
centery = stl.yMin + (stl.yMax - stl.yMin) / 2;
}
stl.Clear();
}
catch (Exception e)
{
Main.conn.log(e.ToString(), false, 2);
SlicingInfo.Stop();
return(false);
}
SlicingInfo.SetAction(Trans.T("L_SLICING_STL"));
string dir = Main.globalSettings.Workdir;
string config = dir + Path.DirectorySeparatorChar + "slic3r.ini";
string cdir = Main.main.slicerPanel.slic3rDirectory;
IniFile ini = new IniFile();
//BasicConfiguration b = BasicConfiguration.basicConf;
string fPrinter = cdir + Path.DirectorySeparatorChar + "print" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rPrint + ".ini";
ini.read(fPrinter);
IniFile ini2 = new IniFile();
ini2.read(cdir + Path.DirectorySeparatorChar + "printer" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rPrinter + ".ini");
IniFile ini3 = new IniFile();
ini3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament1 + ".ini");
IniFile ini3_2 = new IniFile();
if (Main.conn.numberExtruder > 1)
{
ini3_2.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament2 + ".ini");
}
IniFile ini3_3 = new IniFile();
if (Main.conn.numberExtruder > 2)
{
ini3_3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + Main.printerModel.Slic3rFilament3 + ".ini");
}
if (Main.conn.numberExtruder > 1)
{
ini3.merge(ini3_2);
}
if (Main.conn.numberExtruder > 2)
{
ini3.merge(ini3_3);
}
ini.add(ini2);
ini.add(ini3);
ini.flatten();
ini.write(config);
procConvert = new Process();
try
{
string basedir = (string)Main.main.repetierKey.GetValue("installPath", "");
/*string exname = "slic3r.exe";
* if (Environment.OSVersion.Platform == PlatformID.Unix)
* exname = "slic3r.pl";
* if (Main.IsMac)
* exname = "MacOS" + Path.DirectorySeparatorChar + "slic3r";
* string exe = basedir + Path.DirectorySeparatorChar + "Slic3r" + Path.DirectorySeparatorChar + exname;
* if (File.Exists(BasicConfiguration.basicConf.Slic3rExecutable))
* exe = BasicConfiguration.basicConf.Slic3rExecutable;*/
slicefile = file;
string target = StlToGCode(file);
if (File.Exists(target))
{
File.Delete(target);
}
procConvert.EnableRaisingEvents = true;
procConvert.Exited += new EventHandler(ConversionExited);
procConvert.StartInfo.FileName = Main.IsMono ? exe : wrapQuotes(exe);
StringBuilder sb = new StringBuilder();
sb.Append("--load ");
sb.Append(wrapQuotes(config));
sb.Append(" --print-center ");
sb.Append(centerx.ToString("0", GCode.format));
sb.Append(",");
sb.Append(centery.ToString("0", GCode.format));
sb.Append(" -o ");
sb.Append(wrapQuotes(StlToGCode(file)));
sb.Append(" ");
sb.Append(wrapQuotes(file));
procConvert.StartInfo.Arguments = sb.ToString();
procConvert.StartInfo.UseShellExecute = false;
procConvert.StartInfo.RedirectStandardOutput = true;
procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.StartInfo.RedirectStandardError = true;
procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.Start();
// Start the asynchronous read of the standard output stream.
procConvert.BeginOutputReadLine();
procConvert.BeginErrorReadLine();
//Main.main.tab.SelectedTab = Main.main.tabPrint;
}
catch (Exception e)
{
Main.conn.log(e.ToString(), false, 2);
}
return(true);
}
/// <summary>
/// Checks the state of the object.
/// If it is outside print are it starts pulsing
/// </summary>
public void updateSTLState(PrintModel stl2)
{
bool dataChanged = false;
FormPrinterSettings ps = Main.printerSettings;
stl2.UpdateBoundingBox();
LinkedList <PrintModel> testList = ListObjects(false);
foreach (PrintModel pm in testList)
{
pm.oldOutside = pm.outside;
pm.outside = false;
}
foreach (PrintModel pm in testList)
{
foreach (PrintModel pm2 in testList)
{
if (pm == pm2)
{
continue;
}
if (pm2.bbox.IntersectsBox(pm.bbox))
{
pm.outside = true;
pm2.outside = true;
}
}
}
foreach (PrintModel stl in testList)
{
if (!ps.PointInside(stl.xMin, stl.yMin, stl.zMin) ||
!ps.PointInside(stl.xMax, stl.yMin, stl.zMin) ||
!ps.PointInside(stl.xMin, stl.yMax, stl.zMin) ||
!ps.PointInside(stl.xMax, stl.yMax, stl.zMin) ||
!ps.PointInside(stl.xMin, stl.yMin, stl.zMax) ||
!ps.PointInside(stl.xMax, stl.yMin, stl.zMax) ||
!ps.PointInside(stl.xMin, stl.yMax, stl.zMax) ||
!ps.PointInside(stl.xMax, stl.yMax, stl.zMax))
{
stl.outside = true;
}
}
foreach (PrintModel pm in testList)
{
if (pm.oldOutside != pm.outside)
{
dataChanged = true;
pm.ForceViewRegeneration();
if (Main.threeDSettings.pulseOutside.Checked)
{
if (!pm.hasAnimationWithName("pulse") && pm.outside)
{
pm.addAnimation(new PulseAnimation("pulse", 0.03, 0.03, 0.03, 0.3));
}
if (pm.hasAnimationWithName("pulse") && !pm.outside)
{
pm.removeAnimationWithName("pulse");
}
}
}
}
if (dataChanged)
{
listObjects.Refresh();
}
}