public override void Get(ModelDoc2 md, CutlistData cd)
{
Configuration cf = md.ConfigurationManager.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
bool wasResolved;
bool useCached = false;
string tempval = string.Empty;
string tempresval = string.Empty;
if (cf != null)
{
scpm = md.Extension.get_CustomPropertyManager(cf.Name);
}
else
{
scpm = md.Extension.get_CustomPropertyManager(string.Empty);
}
if (SWCustPropMgr != null)
{
scpm = SWCustPropMgr;
}
int res;
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
int tp = 0;
if (int.TryParse(Value, out tp))
{
ID = Value;
Descr = cd.GetOpAbbreviationByID(Value);
}
else
{
ID = cd.GetOpIDByName(Value).ToString();
Descr = Value;
}
//base.Get(md, cd);
}
/// <summary>
/// Directly draws from SW, assinging SwApp. Why do I have all these?
/// </summary>
/// <param name="md">A ModelDoc2.</param>
/// <param name="cd">The Cutlist handler.</param>
public void Get2(ModelDoc2 md, CutlistData cd)
{
Configuration cf = md.ConfigurationManager.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
bool wasResolved;
bool useCached = false;
string tempval = string.Empty;
string tempresval = string.Empty;
if (cf != null) {
scpm = md.Extension.get_CustomPropertyManager(cf.Name);
} else {
scpm = md.Extension.get_CustomPropertyManager(string.Empty);
}
int res;
if (this.Global) {
res = gcpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (res == (int)swCustomInfoGetResult_e.swCustomInfoGetResult_NotPresent) {
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)gcpm.GetType2(this.Name);
} else { // check in wrong place; sometimes it's there.
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (wasResolved) {
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)gcpm.GetType2(this.Name);
}
}
if (Type == swCustomInfoType_e.swCustomInfoNumber && Name.ToUpper().Contains("OVER"))
Type = swCustomInfoType_e.swCustomInfoDouble;
if (this.Name.Contains("OP")) {
int tp = 0;
if (int.TryParse(this._value, out tp)) {
ID = _resValue;
_descr = cd.GetOpAbbreviationByID(_resValue);
} else {
ID = cd.GetOpIDByName(_resValue).ToString();
}
}
} else {
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (wasResolved) {
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)scpm.GetType2(this.Name);
}
if (Name.ToUpper().Contains("CUTLIST MATERIAL")) {
int tp = 0;
if (int.TryParse(_value, out tp)) {
ID = _resValue;
_value = cd.GetMaterialByID(_resValue);
} else {
ID = cd.GetMaterialID(_value).ToString();
}
}
if (Name.ToUpper().Contains("EDGE")) {
int tp = 0;
if (int.TryParse(_value, out tp)) {
ID = _resValue;
_value = cd.GetEdgeByID(_resValue);
} else {
ID = cd.GetEdgeID(_value).ToString();
}
}
}
}
/// <summary>
/// Directly draws from SW, assinging SwApp. Why do I have all these?
/// </summary>
/// <param name="md">A ModelDoc2.</param>
/// <param name="cd">The Cutlist handler.</param>
public void Get(ModelDoc2 md, CutlistData cd)
{
Configuration cf = md.ConfigurationManager.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
bool wasResolved;
bool useCached = false;
string tempval = string.Empty;
string tempresval = string.Empty;
if (cf != null) {
scpm = md.Extension.get_CustomPropertyManager(cf.Name);
} else {
scpm = md.Extension.get_CustomPropertyManager(string.Empty);
}
if (SWCustPropMgr != null) {
scpm = SWCustPropMgr;
}
int res;
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (res == (int)swCustomInfoGetResult_e.swCustomInfoGetResult_NotPresent ||
tempval == string.Empty) {
res = gcpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (tempval != string.Empty) {
Value = tempval;
ResValue = tempresval;
}
} else {
Value = tempval;
ResValue = tempresval;
}
if (Name.ToUpper().Contains("CUTLIST MATERIAL") || Name.ToUpper().Contains("CLID")) {
int tp = 0;
if (int.TryParse(Value, out tp)) {
ID = Value;
Descr = cd.GetMaterialByID(Value);
Value = ID;
} else {
ID = cd.GetMaterialID(Value).ToString();
Descr = Value;
}
}
if (Name.Contains("OP")) {
int tp = 0;
if (int.TryParse(Value, out tp)) {
ID = Value;
Descr = cd.GetOpAbbreviationByID(Value);
} else {
ID = cd.GetOpIDByName(Value).ToString();
Descr = Value;
}
}
if (Name.ToUpper().Contains("EDGE") || (Name.ToUpper().StartsWith("E") && Name.ToUpper().EndsWith("ID"))) {
int tp = 0;
if (int.TryParse(Value, out tp)) {
ID = Value;
Descr = cd.GetEdgeByID(Value);
} else {
ID = cd.GetEdgeID(Value).ToString();
Descr = Value;
}
}
}
/// <summary>
/// Directly draws from SW, assinging SwApp. Why do I have all these?
/// </summary>
/// <param name="md">A ModelDoc2.</param>
/// <param name="cd">The Cutlist handler.</param>
public void Get2(ModelDoc2 md, CutlistData cd)
{
Configuration cf = md.ConfigurationManager.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
bool wasResolved;
bool useCached = false;
string tempval = string.Empty;
string tempresval = string.Empty;
if (cf != null)
{
scpm = md.Extension.get_CustomPropertyManager(cf.Name);
}
else
{
scpm = md.Extension.get_CustomPropertyManager(string.Empty);
}
int res;
if (this.Global)
{
res = gcpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (res == (int)swCustomInfoGetResult_e.swCustomInfoGetResult_NotPresent)
{
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)gcpm.GetType2(this.Name);
}
else // check in wrong place; sometimes it's there.
{
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (wasResolved)
{
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)gcpm.GetType2(this.Name);
}
}
if (Type == swCustomInfoType_e.swCustomInfoNumber && Name.ToUpper().Contains("OVER"))
{
Type = swCustomInfoType_e.swCustomInfoDouble;
}
if (this.Name.Contains("OP"))
{
int tp = 0;
if (int.TryParse(this._value, out tp))
{
ID = _resValue;
_descr = cd.GetOpAbbreviationByID(_resValue);
}
else
{
ID = cd.GetOpIDByName(_resValue).ToString();
}
}
}
else
{
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (wasResolved)
{
Value = tempval;
ResValue = tempresval;
Type = (swCustomInfoType_e)scpm.GetType2(this.Name);
}
if (Name.ToUpper().Contains("CUTLIST MATERIAL"))
{
int tp = 0;
if (int.TryParse(_value, out tp))
{
ID = _resValue;
_value = cd.GetMaterialByID(_resValue);
}
else
{
ID = cd.GetMaterialID(_value).ToString();
}
}
if (Name.ToUpper().Contains("EDGE"))
{
int tp = 0;
if (int.TryParse(_value, out tp))
{
ID = _resValue;
_value = cd.GetEdgeByID(_resValue);
}
else
{
ID = cd.GetEdgeID(_value).ToString();
}
}
}
}
/// <summary>
/// Directly draws from SW, assinging SwApp. Why do I have all these?
/// </summary>
/// <param name="md">A ModelDoc2.</param>
/// <param name="cd">The Cutlist handler.</param>
public virtual void Get(ModelDoc2 md, CutlistData cd)
{
Configuration cf = md.ConfigurationManager.ActiveConfiguration;
CustomPropertyManager gcpm = md.Extension.get_CustomPropertyManager(string.Empty);
CustomPropertyManager scpm;
bool wasResolved;
bool useCached = false;
string tempval = string.Empty;
string tempresval = string.Empty;
if (cf != null)
{
scpm = md.Extension.get_CustomPropertyManager(cf.Name);
}
else
{
scpm = md.Extension.get_CustomPropertyManager(string.Empty);
}
if (SWCustPropMgr != null)
{
scpm = SWCustPropMgr;
}
int res;
res = scpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (res == (int)swCustomInfoGetResult_e.swCustomInfoGetResult_NotPresent ||
tempval == string.Empty)
{
res = gcpm.Get5(Name, useCached, out tempval, out tempresval, out wasResolved);
if (tempval != string.Empty)
{
Value = tempval;
ResValue = tempresval;
}
}
else
{
Value = tempval;
ResValue = tempresval;
}
if (Name.ToUpper().Contains("CUTLIST MATERIAL") || Name.ToUpper().Contains("CLID"))
{
int tp = 0;
if (int.TryParse(Value, out tp))
{
ID = Value;
Descr = cd.GetMaterialByID(Value);
Value = ID;
}
else
{
ID = cd.GetMaterialID(Value).ToString();
Descr = Value;
}
}
if (Name.Contains("OP"))
{
int tp = 0;
if (int.TryParse(Value, out tp))
{
ID = Value;
Descr = cd.GetOpAbbreviationByID(Value);
}
else
{
ID = cd.GetOpIDByName(Value).ToString();
Descr = Value;
}
}
if (Name.ToUpper().Contains("EDGE") || (Name.ToUpper().StartsWith("E") && Name.ToUpper().EndsWith("ID")))
{
int tp = 0;
if (int.TryParse(Value, out tp))
{
ID = Value;
Descr = cd.GetEdgeByID(Value);
}
else
{
ID = cd.GetEdgeID(Value).ToString();
Descr = Value;
}
}
}
