public static Bitmap CreateHoleImage(string xmlFile, Boolean bTop = true, Boolean bBottom = true, Boolean bSide = true, double dotsPerMm = 2)
{
try
{
ProcessBoard board = ParseProcessBoard(xmlFile);
if (board == null)
{
return(null);
}
float angle = 30;
double dblRatio = dotsPerMm;
Font font = new Font("Terminal", (int)(6 * dblRatio));
int margin = (int)(50 * (dblRatio + 0.5));
try
{
Bitmap bmpTest = new Bitmap(1024, 768);
bmpTest.MakeTransparent();
Graphics gTest = Graphics.FromImage(bmpTest);
SizeF testStringSize = gTest.MeasureString("D00.L00.(000.000,000.000)", font);
margin = (int)(testStringSize.Width * Math.Cos(Math.PI * angle / 180.0));
}
catch
{ }
int length = Convert.ToInt32(dblRatio * (board._MaxCorner.x - board._MinCorner.x)) + 2 * margin;
int width = Convert.ToInt32(dblRatio * (board._MaxCorner.y - board._MinCorner.y)) + 2 * margin;
Bitmap bmp = new Bitmap(length, width);
bmp.MakeTransparent();
Graphics g = Graphics.FromImage(bmp);
g.SmoothingMode = SmoothingMode.AntiAlias;
g.InterpolationMode = InterpolationMode.HighQualityBicubic;
g.PixelOffsetMode = PixelOffsetMode.HighQuality;
//g.TranslateTransform(0, width);
//g.ScaleTransform(1, -1);
float[] dashValues = { 16, 4, 2, 3 };
Pen blackDashPen = new Pen(Color.Gray, 1);
blackDashPen.DashPattern = dashValues;
Brush blackBrush = Brushes.Black;
Pen blackPen = new Pen(Color.Black, 1);
Pen holePen = new Pen(Color.Black, 1);
g.FillRectangle(Brushes.White, 0, 0, length, width);
g.FillRectangle(new SolidBrush(Color.FromArgb(245, 245, 245)), margin, margin, length - 2 * margin, width - 2 * margin);
if (board._Contour.Count > 0)
{
Point[] points = new Point[board._Contour.Count];
for (int i = 0; i < board._Contour.Count; i++)
{
points[i].X = margin + Convert.ToInt32(dblRatio * board._Contour[i].x);
points[i].Y = width - (margin + Convert.ToInt32(dblRatio * board._Contour[i].y));
}
g.DrawLines(new Pen(Color.Gray, 1), points);
}
string labelString = "";
PointF labelPos = new PointF();
string labelSide = "";
if (board._ALlHoles.Count > 0)
{
Point from = new Point();
Point to = new Point();
for (int i = 0; i < board._ALlHoles.Count; i++)
{
labelString = "";
DrillHole hole = board._ALlHoles[i];
from.X = margin + Convert.ToInt32(dblRatio * (hole._EntryPoint.x));
from.Y = width - (margin + Convert.ToInt32(dblRatio * (hole._EntryPoint.y)));
if (bSide && hole._HolePlane.Equals("sideHole", StringComparison.InvariantCultureIgnoreCase))
{
if (Math.Abs(hole._Dir.x) > 0.5)
{
to.Y = from.Y;
if (hole._Dir.x < 0)
{
to.X = from.X - Convert.ToInt32(dblRatio * hole._Deep); //右侧孔
g.DrawRectangle(holePen,
to.X,
to.Y - Convert.ToInt32(dblRatio * hole._Diameter / 2),
Convert.ToInt32(dblRatio * hole._Deep),
Convert.ToInt32(dblRatio * hole._Diameter));
}
else
{
to.X = from.X + Convert.ToInt32(dblRatio * hole._Deep); //左侧孔
g.DrawRectangle(holePen,
from.X,
from.Y - Convert.ToInt32(dblRatio * hole._Diameter / 2),
Convert.ToInt32(dblRatio * hole._Deep),
Convert.ToInt32(dblRatio * hole._Diameter));
}
g.DrawLine(blackDashPen, from, to);
labelString = String.Format("D{0}.L{1}.Y{2}", hole._Diameter, hole._Deep, hole._EntryPoint.y);
if (hole._Dir.x < 0)
{
labelSide = ("Right");
}
else
{
labelSide = ("Left");
}
labelPos = (new PointF(from.X, from.Y));
}
else if (Math.Abs(hole._Dir.y) > 0.5)
{
to.X = from.X;
if (hole._Dir.y < 0)
{
to.Y = from.Y + Convert.ToInt32(dblRatio * hole._Deep); //上边孔
g.DrawRectangle(holePen,
from.X - Convert.ToInt32(dblRatio * hole._Diameter / 2),
from.Y,
Convert.ToInt32(dblRatio * hole._Diameter),
Convert.ToInt32(dblRatio * hole._Deep));
}
else
{
to.Y = from.Y - Convert.ToInt32(dblRatio * hole._Deep); //下边孔
g.DrawRectangle(holePen,
to.X - Convert.ToInt32(dblRatio * hole._Diameter / 2),
to.Y,
Convert.ToInt32(dblRatio * hole._Diameter),
Convert.ToInt32(dblRatio * hole._Deep));
}
g.DrawLine(blackDashPen, from, to);
labelString = String.Format("D{0}.L{1}.X{2}", hole._Diameter, hole._Deep, hole._EntryPoint.x);
if (hole._Dir.y < 0)
{
labelSide = ("Top");
}
else
{
labelSide = ("Bottom");
}
labelPos = (new PointF(from.X, from.Y));
}
}
if (bTop && hole._HolePlane.Equals("frontHole", StringComparison.InvariantCultureIgnoreCase))
{
if (Math.Abs(hole._Dir.z) > 0.5)
{
double dblToLeft = Math.Abs(hole._EntryPoint.x - board._MinCorner.x);
double dblToRight = Math.Abs(hole._EntryPoint.x - board._MaxCorner.x);
double offset = dblRatio * hole._Diameter / 2;
if (hole._Dir.z < 0)
{
}
else
{
g.DrawEllipse(holePen,
from.X - Convert.ToInt32(dblRatio * hole._Diameter / 2),
from.Y - Convert.ToInt32(dblRatio * hole._Diameter / 2),
Convert.ToInt32(dblRatio * hole._Diameter),
Convert.ToInt32(dblRatio * hole._Diameter));
//g.DrawLine(holePen, new PointF(from.X - Convert.ToInt32(dblRatio * hole._Diameter), from.Y),
// new PointF(from.X + Convert.ToInt32(dblRatio * hole._Diameter), from.Y));
//g.DrawLine(holePen, new PointF(from.X, from.Y - Convert.ToInt32(dblRatio * hole._Diameter)),
// new PointF(from.X, from.Y + Convert.ToInt32(dblRatio * hole._Diameter)));
}
labelString = String.Format("D{0}.L{1}.({2},{3})", hole._Diameter, hole._Deep, hole._EntryPoint.x, hole._EntryPoint.y);
labelSide = ("Right");
labelPos = (new PointF(from.X + Convert.ToInt32(dblRatio * hole._Diameter / 2), from.Y));
}
}
if (bBottom && hole._HolePlane.Equals("backHole", StringComparison.InvariantCultureIgnoreCase))
{
if (Math.Abs(hole._Dir.z) > 0.5)
{
double dblToLeft = Math.Abs(hole._EntryPoint.x - board._MinCorner.x);
double dblToRight = Math.Abs(hole._EntryPoint.x - board._MaxCorner.x);
double offset = dblRatio * hole._Diameter / 2;
if (hole._Dir.z < 0)
{
}
else
{
g.DrawEllipse(holePen,
from.X - Convert.ToInt32(dblRatio * hole._Diameter / 2),
from.Y - Convert.ToInt32(dblRatio * hole._Diameter / 2),
Convert.ToInt32(dblRatio * hole._Diameter),
Convert.ToInt32(dblRatio * hole._Diameter));
g.DrawLine(holePen, new PointF(from.X - Convert.ToInt32(dblRatio * hole._Diameter), from.Y),
new PointF(from.X + Convert.ToInt32(dblRatio * hole._Diameter), from.Y));
g.DrawLine(holePen, new PointF(from.X, from.Y - Convert.ToInt32(dblRatio * hole._Diameter)),
new PointF(from.X, from.Y + Convert.ToInt32(dblRatio * hole._Diameter)));
}
labelString = String.Format("D{0}.L{1}.({2},{3})", hole._Diameter, hole._Deep, hole._EntryPoint.x, hole._EntryPoint.y);
labelSide = ("Right");
labelPos = (new PointF(from.X + Convert.ToInt32(dblRatio * hole._Diameter / 2), from.Y));
}
}
if (!String.IsNullOrEmpty(labelString))
{
SizeF stringSize = new SizeF();
double x = labelPos.X;
double y = labelPos.Y;
stringSize = g.MeasureString(labelString, font);
g.RotateTransform(-angle);
if (labelSide.Equals("Right", StringComparison.InvariantCultureIgnoreCase))
{
g.TranslateTransform(Convert.ToSingle(x), Convert.ToSingle(y - (stringSize.Height / 2)), MatrixOrder.Append);
}
else if (labelSide.Equals("Left", StringComparison.InvariantCultureIgnoreCase))
{
double nx = x - stringSize.Width * Math.Cos(Math.PI * (angle) / 180.0);
double ny = y + stringSize.Width * Math.Sin(Math.PI * (angle) / 180.0);
g.TranslateTransform(Convert.ToSingle(nx - (stringSize.Height / 2)), Convert.ToSingle(ny - (stringSize.Height / 2)), MatrixOrder.Append);
}
else if (labelSide.Equals("Top", StringComparison.InvariantCultureIgnoreCase))
{
g.TranslateTransform(Convert.ToSingle(x - (hole._Diameter / 2)), Convert.ToSingle(y - (3 * hole._Diameter / 2)), MatrixOrder.Append);
}
else if (labelSide.Equals("Bottom", StringComparison.InvariantCultureIgnoreCase))
{
double nx = x - stringSize.Width * Math.Cos(Math.PI * (angle) / 180.0);
double ny = y + stringSize.Width * Math.Sin(Math.PI * (angle) / 180.0);
g.TranslateTransform(Convert.ToSingle(nx + (hole._Diameter / 2)), Convert.ToSingle(ny), MatrixOrder.Append);
}
g.DrawString(labelString, font, blackBrush, 0, 0);
g.ResetTransform();
}
}
}
g.Flush();
g.Dispose();
return(bmp);
}
catch
{
}
return(null);
}
private static ProcessBoard ParsePartFormsProcess(string xmlFile)
{
ProcessBoard board = new ProcessBoard();
try
{
XmlDocument doc = null;
try
{
doc = new XmlDocument();
doc.Load(xmlFile);
}
catch
{
return(null);
}
board._MinCorner = new SharpPoint3D(double.MaxValue, double.MaxValue, double.MaxValue);
board._MaxCorner = new SharpPoint3D(-1 * double.MaxValue, -1 * double.MaxValue, -1 * double.MaxValue);
//工件轮廓信息
XmlNode nodeContour = doc.SelectSingleNode("/part_forms");
if (nodeContour == null)
{
return(null);
}
for (int iNode = 0; iNode < nodeContour.ChildNodes.Count; iNode++)
{
XmlNode node = nodeContour.ChildNodes[iNode];
if (node == null)
{
continue;
}
SharpPoint3D pt = new SharpPoint3D();
if (node.Name.Equals("part", StringComparison.InvariantCultureIgnoreCase))
{
for (int item = 0; item < node.ChildNodes.Count; item++)
{
if (node.ChildNodes[item].Name.Equals("curvelist", StringComparison.InvariantCultureIgnoreCase))
{
XmlNode nodeLine = node.ChildNodes[item];
for (int iLine = 0; iLine < nodeLine.ChildNodes.Count; iLine++)
{
if (nodeLine.ChildNodes[iLine].Name.Equals("line", StringComparison.InvariantCultureIgnoreCase))
{
SharpPoint3D ptStart = new SharpPoint3D();
SharpPoint3D ptEnd = new SharpPoint3D();
XmlNode nodePoint = nodeLine.ChildNodes[iLine];
for (int iPoint = 0; iPoint < nodePoint.ChildNodes.Count; iPoint++)
{
if (nodePoint.ChildNodes[iPoint].Name.Equals("startpt", StringComparison.InvariantCultureIgnoreCase))
{
XmlNode nodePT = nodePoint.ChildNodes[iPoint];
for (int iPt = 0; iPt < nodePT.ChildNodes.Count; iPt++)
{
if (nodePT.ChildNodes[iPt].Name.Equals("point", StringComparison.InvariantCultureIgnoreCase))
{
if (nodePT.ChildNodes[iPt].Attributes != null)
{
foreach (XmlAttribute attribute in nodePT.ChildNodes[iPt].Attributes)
{
if (attribute.Name.Equals("x", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptStart.x = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptStart.y = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("z", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptStart.z = Convert.ToDouble(attribute.Value);
}
}
}
}
}
}
}
else if (nodePoint.ChildNodes[iPoint].Name.Equals("endpt", StringComparison.InvariantCultureIgnoreCase))
{
XmlNode nodePT = nodePoint.ChildNodes[iPoint];
for (int iPt = 0; iPt < nodePT.ChildNodes.Count; iPt++)
{
if (nodePT.ChildNodes[iPt].Name.Equals("point", StringComparison.InvariantCultureIgnoreCase))
{
if (nodePT.ChildNodes[iPt].Attributes != null)
{
foreach (XmlAttribute attribute in nodePT.ChildNodes[iPt].Attributes)
{
if (attribute.Name.Equals("x", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptEnd.x = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptEnd.y = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("z", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptEnd.z = Convert.ToDouble(attribute.Value);
}
}
}
}
}
}
}
}
}
}
}
else if (node.ChildNodes[item].Name.Equals("process", StringComparison.InvariantCultureIgnoreCase))
{
XmlNode nodeLine = node.ChildNodes[item];
for (int iLine = 0; iLine < nodeLine.ChildNodes.Count; iLine++)
{
if (nodeLine.ChildNodes[item].Name.Equals("hole", StringComparison.InvariantCultureIgnoreCase))
{
XmlNode nodeHole = nodeLine.ChildNodes[item];
DrillHole drillHole = new DrillHole();
drillHole._Dir = new SharpPoint3D(0, 0, 0);
drillHole._ToolNumber = 0;
drillHole._HolePlane = "";
if (nodeHole.Attributes != null)
{
foreach (XmlAttribute attribute in nodeHole.Attributes)
{
if (attribute.Name.Equals("faceid", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._HolePlane = attribute.Value;
}
}
else if (attribute.Name.Equals("dir", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
int dr = Convert.ToInt32(attribute.Value);
}
}
else if (attribute.Name.Equals("diameter", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._Diameter = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("deep", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._Deep = Convert.ToDouble(attribute.Value);
}
}
}
}
for (int iHole = 0; iHole < nodeHole.ChildNodes.Count; iHole++)
{
if (nodeHole.ChildNodes[iHole].Name.Equals("point", StringComparison.InvariantCultureIgnoreCase))
{
if (nodeHole.ChildNodes[iHole].Attributes != null)
{
foreach (XmlAttribute attribute in nodeHole.ChildNodes[iHole].Attributes)
{
if (attribute.Name.Equals("x", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.x = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x80;
}
}
else if (attribute.Name.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.y = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x40;
}
}
else if (attribute.Name.Equals("z", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.z = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x20;
}
}
}
}
}
}
board._ALlHoles.Add(drillHole);
}
}
}
}
}
if (pt.nMask == 0xE0)
{
board._Contour.Add(pt);
}
}
if (board._Contour.Count == 0)
{
return(null);
}
}
catch
{
}
return(board);
}
private static ProcessBoard ParseProcessContour(string xmlFile)
{
ProcessBoard board = new ProcessBoard();
try
{
XmlDocument doc = null;
try
{
doc = new XmlDocument();
doc.Load(xmlFile);
}
catch
{
return(null);
}
board._MinCorner = new SharpPoint3D(double.MaxValue, double.MaxValue, double.MaxValue);
board._MaxCorner = new SharpPoint3D(-1 * double.MaxValue, -1 * double.MaxValue, -1 * double.MaxValue);
//工件轮廓信息
XmlNode nodeContour = doc.SelectSingleNode("/process/contour");
if (nodeContour == null)
{
return(null);
}
for (int iNode = 0; iNode < nodeContour.ChildNodes.Count; iNode++)
{
XmlNode node = nodeContour.ChildNodes[iNode];
if (node == null)
{
continue;
}
SharpPoint3D pt = new SharpPoint3D();
if (node.Name.Equals("point", StringComparison.InvariantCultureIgnoreCase))
{
if (node.Attributes != null)
{
foreach (XmlAttribute attribute in node.Attributes)
{
if (attribute.Name.Equals("x", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
double value = Convert.ToDouble(attribute.Value);
board._MinCorner.x = Math.Min(board._MinCorner.x, value);
board._MaxCorner.x = Math.Max(board._MaxCorner.x, value);
pt.x = value;
pt.nMask |= 0x80;
}
}
else if (attribute.Name.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
double value = Convert.ToDouble(attribute.Value);
board._MinCorner.y = Math.Min(board._MinCorner.y, value);
board._MaxCorner.y = Math.Max(board._MaxCorner.y, value);
pt.y = value;
pt.nMask |= 0x40;
}
}
else if (attribute.Name.Equals("z", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
double value = Convert.ToDouble(attribute.Value);
board._MinCorner.z = Math.Min(board._MinCorner.z, value);
board._MaxCorner.z = Math.Max(board._MaxCorner.z, value);
pt.z = value;
pt.nMask |= 0x20;
}
}
}
}
}
if (pt.nMask == 0xE0)
{
board._Contour.Add(pt);
}
}
if (board._Contour.Count == 0)
{
return(null);
}
//工件孔位信息
long nToolNumber = -1;
string holePlane = "";
SharpPoint3D ptDir = new SharpPoint3D();
XmlNode nodeRoot = doc.SelectSingleNode("/process");
if (nodeRoot == null)
{
return(null);
}
for (int iNode = 0; iNode < nodeRoot.ChildNodes.Count; iNode++)
{
XmlNode nodeSide = nodeRoot.ChildNodes[iNode];
if (nodeSide != null)
{
if ((nodeSide.Name.Equals("sideHole", StringComparison.InvariantCultureIgnoreCase)) ||
(nodeSide.Name.Equals("frontHole", StringComparison.InvariantCultureIgnoreCase)) ||
(nodeSide.Name.Equals("backHole", StringComparison.InvariantCultureIgnoreCase)))
{
holePlane = nodeSide.Name;
if (nodeSide.Attributes != null)
{
foreach (XmlAttribute attribute in nodeSide.Attributes)
{
if (attribute.Name.Equals("dirx", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptDir.x = Convert.ToDouble(attribute.Value);
ptDir.nMask |= 0x80;
}
}
else if (attribute.Name.Equals("diry", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptDir.y = Convert.ToDouble(attribute.Value);
ptDir.nMask |= 0x40;
}
}
else if (attribute.Name.Equals("dirz", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
ptDir.z = Convert.ToDouble(attribute.Value);
ptDir.nMask |= 0x20;
}
}
}
}
for (int iTool = 0; iTool < nodeSide.ChildNodes.Count; iTool++)
{
XmlNode nodeTool = nodeSide.ChildNodes[iTool];
if (nodeTool != null)
{
if (nodeTool.Name.Equals("tool", StringComparison.InvariantCultureIgnoreCase))
{
if (nodeTool.Attributes != null)
{
foreach (XmlAttribute attribute in nodeTool.Attributes)
{
if (attribute.Name.Equals("toolno", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
nToolNumber = Convert.ToInt32(attribute.Value);
}
}
}
}
for (int iHole = 0; iHole < nodeTool.ChildNodes.Count; iHole++)
{
XmlNode nodeHole = nodeTool.ChildNodes[iHole];
if (nodeHole != null)
{
if (nodeHole.Name.Equals("hole", StringComparison.InvariantCultureIgnoreCase))
{
DrillHole drillHole = new DrillHole();
drillHole._Dir = new SharpPoint3D(ptDir.x, ptDir.y, ptDir.z);
drillHole._ToolNumber = nToolNumber;
drillHole._HolePlane = holePlane;
if (nodeHole.Attributes != null)
{
foreach (XmlAttribute attribute in nodeHole.Attributes)
{
if (attribute.Name.Equals("x", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.x = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x80;
}
}
else if (attribute.Name.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.y = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x40;
}
}
else if (attribute.Name.Equals("z", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._EntryPoint.z = Convert.ToDouble(attribute.Value);
drillHole._EntryPoint.nMask |= 0x20;
}
}
else if (attribute.Name.Equals("diameter", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._Diameter = Convert.ToDouble(attribute.Value);
}
}
else if (attribute.Name.Equals("deep", StringComparison.InvariantCultureIgnoreCase))
{
if (!String.IsNullOrEmpty(attribute.Value))
{
drillHole._Deep = Convert.ToDouble(attribute.Value);
}
}
}
}
board._ALlHoles.Add(drillHole);
}
}
}
}
}
}
}
}
}
}
catch
{
}
return(board);
}