public void SaveConnectorSpec(string connectorType, string toolType, string profileName,
int pins,
float baseThickness, float unseatedTop, float height, float seatedHeight,
float graphFPerPin, float graphDistance,
float minFPerPin, float maxFPerPin, float userFPerPin, float otherForce,
float parsPercent, float parsStartHeight, float parsDistance,
float gradDegrees, string comments,
string byWho, out string resCode, out string resDesc)
{
try
{
Log.AppendText("กำลังบันทึกข้อมูล Connector {" + connectorType + ", " + toolType + ", " + profileName + ", " + pins.ToString() + ", " +
baseThickness.ToString() + ", " + unseatedTop.ToString() + ", " + height.ToString() + ", " + seatedHeight.ToString() +
graphFPerPin.ToString() + ", " + graphDistance.ToString() +
minFPerPin.ToString() + ", " + maxFPerPin.ToString() + ", " + userFPerPin.ToString() + ", " + otherForce.ToString() +
parsPercent.ToString() + ", " + parsStartHeight.ToString() + ", " + parsDistance.ToString() + ", " +
gradDegrees.ToString() + ", " + comments +
"} by " + byWho);
ManageBiz ms = new ManageBiz();
DataTable dt;
dt = ms.GetConnectorBy(connectorType);
if (dt.Rows.Count == 0)
{
Log.AppendText("ตรวจสอบ Connector Type เรียบร้อย");
ms.AddNewConnectorSpec(connectorType, toolType, profileName, pins,
baseThickness, unseatedTop, height, seatedHeight,
graphFPerPin, graphDistance,
minFPerPin, maxFPerPin, userFPerPin, otherForce,
parsPercent, parsStartHeight, parsDistance,
gradDegrees, comments);
resCode = "00";
resDesc = "";
}
else
{
Log.AppendText("WARNING! : ToolType ซ้ำ");
Log.AppendText("เริ่มต้น Update Tool...");
ms.UpdateConnectorSpec(connectorType, toolType, profileName, pins,
baseThickness, unseatedTop, height, seatedHeight,
graphFPerPin, graphDistance,
minFPerPin, maxFPerPin, userFPerPin, otherForce,
parsPercent, parsStartHeight, parsDistance,
gradDegrees, comments);
resCode = "01";
resDesc = "";
}
}
catch (Exception ex)
{
resCode = "EX";
resDesc = ex.Message;
Log.AppendText(ex.Message);
}
}
//
// ---------------------------------------------------------
// Constructor
// ---------------------------------------------------------
public ConnectorInfo(string connectorType, float x, float y, float angle, string comments, float fixtureThickness, float boardThickness)
{
// Preseting
ToolType = "";
ProfileName = "";
//
NumberOfPins = 0;
CONBaseThickness = 0; CONUnseatedTop = 0; CONHeight = 0; CONSeatedHeight = 0;
//
GraphFPerPin = 0; GraphDistance = 0;
//
MinFPerPin = 0; MaxFPerPin = 0; UserFPerPin = 0; OtherForce = 0;
//
PARSPercent = 0; PARSStartHeight = 0; PARSDistance = 0;
//
FGradDegrees = 0;
CONComments = "";
//
ToolClearance = 0; ToolHeight = 0; ToolWidth = 0; ToolLength = 0;
//
ToolBarcode = ""; ToolComments = "";
//
PARSSamplingStartHeight = 0; PARSSamplingDistance = 0;
//
Error1 = ""; Error2 = ""; Error3 = ""; Error4 = ""; Error5 = "";
//
H1Par = 0; H2Par = 0; H3Par = 0; H4Par = 0; H5Par = 0; H6Par = 0; H7Par = 0;
//
HAC1 = ""; HAC2 = ""; HAC3 = ""; HAC4 = ""; HAC5 = ""; HAC6 = ""; HAC7 = "";
//
F1Par = 0; F2Par = 0; F3Par = 0; F4Par = 0; F5Par = 0; F6Par = 0; F7Par = 0;
//
FAC1 = ""; FAC2 = ""; FAC3 = ""; FAC4 = ""; FAC5 = ""; FAC6 = ""; FAC7 = "";
//
SP1 = 0; SP2 = 0; SP3 = 0; SP4 = 0; SP5 = 0; SP6 = 0; SP7 = 0;
//
// Assigning
this.ConnectorType = connectorType;
//
this.X = x;
this.Y = y;
this.Angle = angle;
this.Comments = comments;
//
this.FixtureThickness = fixtureThickness;
this.BoardThickness = boardThickness;
//
this.Location = new PointF(x, y);
//
// Connector type database
ManageBiz ms = new ManageBiz();
DataTable dtCON;
dtCON = ms.GetConnectorBy(connectorType);
if (dtCON != null)
{
if (dtCON.Rows.Count > 0)
{
ToolType = dtCON.Rows[0]["ToolType"].ToString();
ProfileName = dtCON.Rows[0]["ProfileName"].ToString();
//
NumberOfPins = int.Parse(dtCON.Rows[0]["NumberOfPins"].ToString());
CONBaseThickness = float.Parse(dtCON.Rows[0]["BaseThickness"].ToString());
CONUnseatedTop = float.Parse(dtCON.Rows[0]["UnseatedTop"].ToString());
CONHeight = float.Parse(dtCON.Rows[0]["Height"].ToString());
CONSeatedHeight = float.Parse(dtCON.Rows[0]["SeatedHeight"].ToString());
//
GraphFPerPin = float.Parse(dtCON.Rows[0]["GraphFPerPin"].ToString());
GraphDistance = float.Parse(dtCON.Rows[0]["GraphDistance"].ToString());
//
MinFPerPin = float.Parse(dtCON.Rows[0]["MinFPerPin"].ToString());
MaxFPerPin = float.Parse(dtCON.Rows[0]["MaxFPerPin"].ToString());
UserFPerPin = float.Parse(dtCON.Rows[0]["UserFPerPin"].ToString());
OtherForce = float.Parse(dtCON.Rows[0]["OtherForce"].ToString());
//
PARSPercent = float.Parse(dtCON.Rows[0]["PARSPercent"].ToString());
PARSStartHeight = float.Parse(dtCON.Rows[0]["PARSStartHeight"].ToString());
PARSDistance = float.Parse(dtCON.Rows[0]["PARSDistance"].ToString());
//
FGradDegrees = float.Parse(dtCON.Rows[0]["FGradDegrees"].ToString());
//
CONComments = dtCON.Rows[0]["Comments"].ToString();
}
}
dtCON.Dispose();
dtCON = null;
//
// Tool type database
DataTable dtTOOL;
dtTOOL = ms.GetToolBy(ToolType);
if (dtTOOL != null)
{
if (dtTOOL.Rows.Count > 0)
{
ToolClearance = float.Parse(dtTOOL.Rows[0]["Clearance"].ToString());
ToolHeight = float.Parse(dtTOOL.Rows[0]["Height"].ToString());
ToolWidth = float.Parse(dtTOOL.Rows[0]["Width"].ToString());
ToolLength = float.Parse(dtTOOL.Rows[0]["Length"].ToString());
//
ToolBarcode = dtTOOL.Rows[0]["Barcode"].ToString();
ToolComments = dtTOOL.Rows[0]["Comments"].ToString();
}
}
dtTOOL.Dispose();
dtTOOL = null;
//
// Profile database
DataTable dtPF;
dtPF = ms.GetProfileBy(ProfileName);
if (dtPF != null)
{
if (dtPF.Rows.Count > 0)
{
PARSSamplingStartHeight = float.Parse(dtPF.Rows[0]["StartHeight"].ToString());
PARSSamplingDistance = float.Parse(dtPF.Rows[0]["Distance"].ToString());
//
Error1 = dtPF.Rows[0]["Error1"].ToString();
Error2 = dtPF.Rows[0]["Error2"].ToString();
Error3 = dtPF.Rows[0]["Error3"].ToString();
Error4 = dtPF.Rows[0]["Error4"].ToString();
Error5 = dtPF.Rows[0]["Error5"].ToString();
//
H1Par = float.Parse(dtPF.Rows[0]["H1Par"].ToString());
H2Par = float.Parse(dtPF.Rows[0]["H2Par"].ToString());
H3Par = float.Parse(dtPF.Rows[0]["H3Par"].ToString());
H4Par = float.Parse(dtPF.Rows[0]["H4Par"].ToString());
H5Par = float.Parse(dtPF.Rows[0]["H5Par"].ToString());
H6Par = float.Parse(dtPF.Rows[0]["H6Par"].ToString());
H7Par = float.Parse(dtPF.Rows[0]["H7Par"].ToString());
//
HAC1 = dtPF.Rows[0]["HAC1"].ToString();
HAC2 = dtPF.Rows[0]["HAC2"].ToString();
HAC3 = dtPF.Rows[0]["HAC3"].ToString();
HAC4 = dtPF.Rows[0]["HAC4"].ToString();
HAC5 = dtPF.Rows[0]["HAC5"].ToString();
HAC6 = dtPF.Rows[0]["HAC6"].ToString();
HAC7 = dtPF.Rows[0]["HAC7"].ToString();
//
F1Par = float.Parse(dtPF.Rows[0]["F1Par"].ToString());
F2Par = float.Parse(dtPF.Rows[0]["F2Par"].ToString());
F3Par = float.Parse(dtPF.Rows[0]["F3Par"].ToString());
F4Par = float.Parse(dtPF.Rows[0]["F4Par"].ToString());
F5Par = float.Parse(dtPF.Rows[0]["F5Par"].ToString());
F6Par = float.Parse(dtPF.Rows[0]["F6Par"].ToString());
F7Par = float.Parse(dtPF.Rows[0]["F7Par"].ToString());
//
FAC1 = dtPF.Rows[0]["FAC1"].ToString();
FAC2 = dtPF.Rows[0]["FAC2"].ToString();
FAC3 = dtPF.Rows[0]["FAC3"].ToString();
FAC4 = dtPF.Rows[0]["FAC4"].ToString();
FAC5 = dtPF.Rows[0]["FAC5"].ToString();
FAC6 = dtPF.Rows[0]["FAC6"].ToString();
FAC7 = dtPF.Rows[0]["FAC7"].ToString();
//
SP1 = float.Parse(dtPF.Rows[0]["SP1"].ToString());
SP2 = float.Parse(dtPF.Rows[0]["SP2"].ToString());
SP3 = float.Parse(dtPF.Rows[0]["SP3"].ToString());
SP4 = float.Parse(dtPF.Rows[0]["SP4"].ToString());
SP5 = float.Parse(dtPF.Rows[0]["SP5"].ToString());
SP6 = float.Parse(dtPF.Rows[0]["SP6"].ToString());
SP7 = float.Parse(dtPF.Rows[0]["SP7"].ToString());
}
}
dtPF.Dispose();
dtPF = null;
//
// Compute tool parameters
this.ToolSize = new SizeF(this.ToolWidth, this.ToolLength);
if (this.ToolSize.Width <= 0)
{
this.ToolSize.Width = 1;
}
if (this.ToolSize.Height <= 0)
{
this.ToolSize.Height = 1;
}
//
//
/* -----------------------------------------------------------------------------------------
* ชุดคำสั่ง ต่อไปนี้ ถูกออกแบบตามความต้องการ เข้าถึงข้อมูลจากฐานข้อมูล
* เช่น ระยะสั่งให้เลื่อนแท่นกด เป็นต้น
* ----------------------------------------------------------------------------------------*/
/* ----------------------------------------------
* Graph scaling
* ----------------------------------------------*/
GraphHorizontalFrom = CONUnseatedTop - CONHeight;
GraphHorizontalTo = GraphHorizontalFrom - GraphDistance;
//
GraphVerticalFrom = 0;
GraphVerticalTo = GraphFPerPin;
//
GraphForceLimit = MaxFPerPin / 2 + MinFPerPin / 2;
GraphHeightLimit = 0;
//
/* ----------------------------------------------
* Height parameters
* ----------------------------------------------*/
GotoZeroSpeed = Properties.Settings.Default.GotoZeroSpeed; // mm per sec
ZeroClearance = Properties.Settings.Default.ZeroClearance; //mm
ZeroHeight = Properties.Settings.Default.ZeroHeight; // mm
//
/* ----------------------------------------------
* Distance parameters
* ----------------------------------------------*/
UnseatedToolTop = FixtureThickness + BoardThickness + CONUnseatedTop - CONHeight + CONBaseThickness + ToolHeight;
Distance_UnseatedToolTop = ZeroHeight - UnseatedToolTop;
AboveBoardBaseHeight = CONUnseatedTop - CONHeight;
Distance_Seated = AboveBoardBaseHeight - CONSeatedHeight;
//
/* ----------------------------------------------
* Profiled distance parameters
* เครื่องหมาย (-) ให้กำหนดระยะ Jog แบบทิศขึ้นเป็น (-)
* ----------------------------------------------*/
PF_Row0_Distance = Distance_UnseatedToolTop - Properties.Settings.Default.OffsetTopDistance;
PF_Row1_Distance = Properties.Settings.Default.OffsetTopDistance - H1Par;
PF_Row2_Distance = Distance_Seated - H2Par + H1Par;
PF_Row3_Distance = Distance_Seated - H3Par + H1Par;
PF_Row4_Distance = Distance_Seated - H4Par + H1Par;
PF_Row5_Distance = Distance_Seated - H5Par + H1Par;
PF_Row6_Distance = Distance_Seated - H6Par + H1Par;
PF_Row7_Distance = Distance_Seated - H7Par + H1Par;
//
/* ----------------------------------------------
* Profiled distance parameters
* ----------------------------------------------*/
PF_Row1_Force = F1Par;
PF_Row2_Force = MinFPerPin * NumberOfPins + F2Par;
PF_Row3_Force = MaxFPerPin * NumberOfPins + F3Par;
PF_Row4_PARS = F4Par;
PF_Row5_Force = F5Par;
PF_Row6_Force = MaxFPerPin * NumberOfPins + F6Par;
PF_Row7_Grad = F7Par;
//
}
public void LoadConnectorSpec(string connectorType, ref ComboBox _ToolType, ref ComboBox _ProfileName, ref TextBox _Pins,
ref TextBox _baseThickness, ref TextBox _unseatedTop, ref TextBox _height, ref TextBox _seatedHeight,
ref TextBox _graphFPerPin, ref TextBox _graphDistance,
ref TextBox _minFPerPin, ref TextBox _maxFPerPin, ref TextBox _userFPerPin, ref TextBox _otherForce,
ref TextBox _parsPercent, ref TextBox _parsStartHeight, ref TextBox _parsDistance,
ref TextBox _gradDegrees, ref TextBox _comments)
{
try
{
Log.AppendText("กำลังเรียกข้อมูล Connector spec. {" + connectorType + "}");
DataTable dtConnector = new DataTable();
DataTable dtToolType = new DataTable();
DataTable dtProfileName = new DataTable();
ManageBiz ms = new ManageBiz();
dtConnector = ms.GetConnectorBy(connectorType);
dtToolType = ms.GetToolList();
dtProfileName = ms.GetProfileList();
if (dtConnector.Rows.Count > 0)
{
_ToolType.DataSource = null;
_ToolType.DataSource = dtToolType;
_ToolType.DisplayMember = "ToolType";
_ToolType.ValueMember = "ToolType";
_ToolType.Text = dtConnector.Rows[0]["ToolType"].ToString();
_ProfileName.DataSource = null;
_ProfileName.DataSource = dtProfileName;
_ProfileName.DisplayMember = "ProfileName";
_ProfileName.ValueMember = "ProfileName";
_ProfileName.Text = dtConnector.Rows[0]["ProfileName"].ToString();
_Pins.Text = dtConnector.Rows[0]["NumberOfPins"].ToString();
_baseThickness.Text = dtConnector.Rows[0]["BaseThickness"].ToString();
_unseatedTop.Text = dtConnector.Rows[0]["UnseatedTop"].ToString();
_height.Text = dtConnector.Rows[0]["Height"].ToString();
_seatedHeight.Text = dtConnector.Rows[0]["SeatedHeight"].ToString();
_graphFPerPin.Text = dtConnector.Rows[0]["GraphFPerPin"].ToString();
_graphDistance.Text = dtConnector.Rows[0]["GraphDistance"].ToString();
_minFPerPin.Text = dtConnector.Rows[0]["MinFPerPin"].ToString();
_maxFPerPin.Text = dtConnector.Rows[0]["MaxFPerPin"].ToString();
_userFPerPin.Text = dtConnector.Rows[0]["UserFPerPin"].ToString();
_userFPerPin.Text = dtConnector.Rows[0]["OtherForce"].ToString();
_parsPercent.Text = dtConnector.Rows[0]["PARSPercent"].ToString();
_parsStartHeight.Text = dtConnector.Rows[0]["PARSStartHeight"].ToString();
_parsDistance.Text = dtConnector.Rows[0]["PARSDistance"].ToString();
_gradDegrees.Text = dtConnector.Rows[0]["FGradDegrees"].ToString();
_comments.Text = dtConnector.Rows[0]["Comments"].ToString();
Log.AppendText("เรียกข้อมูล Tools เรียบร้อย");
}
else
{
Log.AppendText("ไม่พบข้อมูล Tools");
}
}
catch (Exception ex) { Log.AppendText(ex.Message); MessageBox.Show(ex.Message); }
}