/// <summary>
/// 没有任何作业时，如果缓存位被占用，则强制回挪，
/// TV分配，挪移车位分配
/// </summary>
/// <param name="frlct"></param>
/// <param name="tolct"></param>
/// <returns></returns>
public Device PPYAllocateTvOfTransfer(Location frlct, out Location tolct)
{
tolct = null;
CWLocation cwlctn = new CWLocation();
CWICCard cwiccd = new CWICCard();
List <Location> allLocLst = cwlctn.FindLocList();
var query = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
loc.Region == frlct.Region &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null &&
loc.NeedBackup == 0 &&
compareSize(loc.LocSize, frlct.LocSize) >= 0
orderby Math.Abs(frlct.LocColumn - loc.LocColumn)
select loc;
List <Location> lctnLst = query.ToList();
if (lctnLst.Count > 0)
{
tolct = lctnLst.FirstOrDefault();
Device tv = new CWDevice().Find(d => d.Region == frlct.Region);
return(tv);
}
return(null);
}
/// <summary>
/// 6174平面移动库挪移车位查找，库区只有一个车位尺寸
/// </summary>
/// <param name="frLct"></param>
/// <returns></returns>
public Location PPYAllocateLctnNeedTransfer(Location frLct)
{
CWLocation cwlctn = new CWLocation();
CWICCard cwiccd = new CWICCard();
List <Location> lctnLst = cwlctn.FindLocList();
//找出1、2边空闲的车位
var query_same = from loc in lctnLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
loc.Region == frLct.Region &&
loc.LocSide != 3 &&
compareSize(loc.LocSize, frLct.LocSize) >= 0 &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null
orderby Math.Abs(frLct.LocColumn - loc.LocColumn)
select loc;
List <Location> availLst = new List <Location>();
foreach (Location loc in query_same)
{
//如果是1边车位，后面的车位要是空闲或占用的
if (loc.LocSide == 1)
{
string backAddrs = string.Format((loc.LocSide + 2).ToString() + loc.Address.Substring(1));
Location back = cwlctn.FindLocation(lc => lc.Address == backAddrs);
if (back != null)
{
if (back.Status == EnmLocationStatus.Space ||
back.Status == EnmLocationStatus.Occupy)
{
availLst.Add(loc);
}
}
}
else
{
availLst.Add(loc);
}
}
//再找缓存车位
var query_temp = from loc in lctnLst
where loc.Type == EnmLocationType.Temporary &&
loc.Status == EnmLocationStatus.Space &&
loc.Region == frLct.Region &&
compareSize(loc.LocSize, frLct.LocSize) >= 0
orderby Math.Abs(frLct.LocColumn - loc.LocColumn)
select loc;
availLst.AddRange(query_temp);
if (availLst.Count > 0)
{
return(availLst[0]);
}
return(null);
}
/// <summary>
/// 添加，修改车位的入库时间,
/// </summary>
/// <param name="rcd"></param>
/// <returns></returns>
public Response Add(RemotePayFeeRcd rcd)
{
Log log = LogFactory.GetLogger("CWRemoteServer add");
Response resp = new Response();
try
{
CWLocation cwlctn = new CWLocation();
Location loc = cwlctn.FindLocation(lc => lc.ICCode == rcd.strICCardID);
if (loc == null)
{
loc = cwlctn.FindLocation(lc => lc.PlateNum == rcd.strPlateNum);
}
if (loc != null)
{
//修改车位的入库时间
loc.InDate = DateTime.Now;
cwlctn.UpdateLocation(loc);
rcd.Warehouse = loc.Warehouse;
rcd.LocAddress = loc.Address;
log.Info("云服务下发付款成功通知,strICCardID- " + rcd.strICCardID + " ,strPlateNum- " + rcd.strPlateNum + " ,wh- " + loc.Warehouse + " ,address- " + loc.Address);
return(manager.Add(rcd));
}
else
{
resp.Message = "找不到存车卡号";
log.Info("云服务下发缴费通知时，在库内找不到对应车位，strICCardID- " + rcd.strICCardID + " ,strPlateNum- " + rcd.strPlateNum);
}
}
catch (Exception ex)
{
resp.Message = "出现异常- " + ex.ToString();
log.Error(ex.ToString());
}
return(resp);
}
/// <summary>
/// 分配车位:
/// 1、优先分配中间区域的车位
/// 2、判断ETV可达，车厅可达
/// </summary>
/// <param name="checkcode"></param>
/// <returns></returns>
public Location AllocateLoc(string checkcode)
{
//优先分配中间区域的车位
int middlecolmn = 9;
CWLocation cwlctn = new CWLocation();
CWDevice cwdevice = new CWDevice();
CWTask cwtask = new CWTask();
CWICCard cwiccd = new CWICCard();
#region 依距车厅的远近找出所有车位的集合
List <Location> allLocLst = cwlctn.FindLocList();
List <Customer> fixCustLst = cwiccd.FindCustList(cu => cu.Type == EnmICCardType.FixedLocation || cu.Type == EnmICCardType.VIP);
//排除固定车位
List <Location> suitLocsLst = allLocLst.FindAll(lc => fixCustLst.Exists(cc => cc.LocAddress == lc.Address && cc.Warehouse == lc.Warehouse) == false);
List <Location> sameLctnLst = new List <Location>();
var locList_small = from loc in suitLocsLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
string.Compare(loc.LocSize, checkcode) == 0
orderby loc.LocSide ascending, Math.Abs(loc.LocColumn - middlecolmn) ascending
select loc;
var locList_big = from loc in suitLocsLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
string.Compare(loc.LocSize, checkcode) > 0
orderby loc.LocSide ascending, Math.Abs(loc.LocColumn - middlecolmn) ascending
select loc;
sameLctnLst.AddRange(locList_small);
sameLctnLst.AddRange(locList_big);
List <Location> lctnLst = new List <Location>();
#region 如果是重列车位，优先分配前面车位是空闲的，其次是占用的，最后才是执行中的
List <Location> spaceLctnLst = new List <Location>();
List <Location> occupyLctnLst = new List <Location>();
List <Location> otherLctnLst = new List <Location>();
foreach (Location loc in sameLctnLst)
{
if (loc.LocSide == 4)
{
#region 判断前面车位状态
string fwdAddrs = "2" + loc.Address.Substring(1);
Location forward = cwlctn.FindLocation(l => l.Address == fwdAddrs);
if (forward != null)
{
if (forward.Type == EnmLocationType.Normal)
{
if (forward.Status == EnmLocationStatus.Space)
{
spaceLctnLst.Add(loc);
}
else if (forward.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst.Add(loc);
}
else
{
otherLctnLst.Add(loc);
}
}
}
#endregion
}
else if (loc.LocSide == 2)
{
#region 判断后面车位状态
string bckAddrs = "4" + loc.Address.Substring(1);
Location back = cwlctn.FindLocation(l => l.Address == bckAddrs);
if (back != null)
{
if (back.Type == EnmLocationType.Normal)
{
if (back.Status == EnmLocationStatus.Space)
{
spaceLctnLst.Add(loc);
}
else if (back.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst.Add(loc);
}
else
{
otherLctnLst.Add(loc);
}
}
else //禁用的
{
spaceLctnLst.Add(loc);
}
}
#endregion
}
else
{
spaceLctnLst.Add(loc);
}
}
lctnLst.AddRange(spaceLctnLst);
lctnLst.AddRange(occupyLctnLst);
lctnLst.AddRange(otherLctnLst);
#endregion
if (lctnLst.Count == 0)
{
return(null);
}
List <Device> nEtvList = cwdevice.FindList(d => d.Type == EnmSMGType.ETV);
WorkScope workscope = new WorkScope(nEtvList);
List <Device> availHallLst = cwdevice.FindList(d => d.Type == EnmSMGType.Hall && d.Mode == EnmModel.Automatic);
List <Device> availEtvLst = nEtvList.FindAll(d => d.Mode == EnmModel.Automatic);
if (availEtvLst.Count == 0 ||
availHallLst.Count == 0)
{
return(null);
}
if (availEtvLst.Count == 2 && availHallLst.Count == 2)
{
return(lctnLst.FirstOrDefault());
}
if (availEtvLst.Count == 1)
{
CScope scope = workscope.GetEtvScope(availEtvLst[0]);
if (availHallLst.Count == 2)
{
foreach (Location loc in lctnLst)
{
if (loc.LocColumn >= scope.LeftCol && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
}
else
{
Device hall = availHallLst[0];
int hallcolmn = Convert.ToInt32(hall.Address.Substring(1, 2));
if (hallcolmn >= scope.LeftCol && hallcolmn <= scope.RightCol)
{
foreach (Location loc in lctnLst)
{
if (loc.LocColumn >= scope.LeftCol && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
}
}
}
#endregion
return(null);
}
/// <summary>
/// 依指纹特性值，查找对应的顾客及存车车位
/// </summary>
/// <param name="strTZ"></param>
/// <returns></returns>
public Response FindCustByFPrintFeacture(string strTZ)
{
Response resp = new Response();
Log log = LogFactory.GetLogger("FindCustByFPrintFeacture");
try
{
FingerPrint origPrint = null;
byte[] current = FPrintBase64.Base64FingerDataToHex(strTZ);
List <FingerPrint> printList = manager.FindList().ToList();
foreach (FingerPrint fp in printList)
{
byte[] orig = FPrintBase64.Base64FingerDataToHex(fp.FingerInfo);
if (orig == null)
{
log.Debug("指纹-" + fp.FingerInfo + " ,转化为Byte失败！");
}
int iRet = FiPrintMatch.FPIMatch(current, orig, 3);
if (iRet == 0)
{
origPrint = fp;
break;
}
}
if (origPrint != null)
{
resp.Code = 1;
RetFPring iRet = new RetFPring();
iRet.SNNumber = origPrint.SN_Number.ToString();
Customer cust = new CWICCard().FindCust(origPrint.CustID);
if (cust != null)
{
iRet.UserName = cust.UserName;
iRet.Plate = cust.PlateNum;
}
Location loc = new CWLocation().FindLocation(lc => lc.ICCode == origPrint.SN_Number.ToString());
if (loc != null)
{
iRet.Warehouse = loc.Warehouse.ToString();
iRet.LocAddrs = loc.Address;
}
resp.Message = "找到匹配注册指纹";
resp.Data = iRet;
}
else
{
//注册指纹库内没有匹配的，则查询存车指纹库
SaveCertificate sproof = null;
CWSaveProof cwsaveproof = new CWSaveProof();
List <SaveCertificate> proofLst = cwsaveproof.FindList(p => p.IsFingerPrint == 1);
foreach (SaveCertificate cert in proofLst)
{
byte[] orig = FPrintBase64.Base64FingerDataToHex(cert.Proof);
if (orig == null)
{
log.Debug("存车指纹库： 指纹 - " + cert.SNO + " ,转化为Byte失败！");
continue;
}
byte[] psMB = orig;
int nback = FiPrintMatch.FPIMatch(psMB, current, 3);
//比对成功
if (nback == 0)
{
sproof = cert;
break;
}
}
if (sproof != null)
{
resp.Code = 1;
RetFPring iRet = new RetFPring();
iRet.SNNumber = sproof.SNO.ToString();
Location loc = new CWLocation().FindLocation(lc => lc.ICCode == iRet.SNNumber);
if (loc != null)
{
iRet.Warehouse = loc.Warehouse.ToString();
iRet.LocAddrs = loc.Address;
}
resp.Message = "存车指纹库内找到匹配指纹";
resp.Data = iRet;
}
}
}
catch (Exception ex)
{
log.Error(ex.ToString());
}
return(resp);
}
/// <summary>
/// 查询临时用户费用
/// </summary>
public Response GetTempUserInfo(string iccode, bool isPlate)
{
Log log = LogFactory.GetLogger("CWTariff.GetTempUserInfo");
Response resp = new Response();
CWICCard cwiccd = new CWICCard();
CWLocation cwlctn = new CWLocation();
try
{
Location loc = null;
TempUserInfo info = new TempUserInfo();
#region 暂不用
//if (!isPlate)
//{
// #region
// ICCard iccd = cwiccd.Find(ic=>ic.UserCode==iccode);
// if (iccd == null)
// {
// resp.Message = "不是本系统卡！";
// return resp;
// }
// if (iccd.CustID != 0)
// {
// Customer cust = cwiccd.FindCust(iccd.CustID);
// if (cust != null)
// {
// if (cust.Type != EnmICCardType.Temp)
// {
// resp.Message = "该用户不是临时用户！";
// return resp;
// }
// }
// }
// loc = cwlctn.FindLocation(lc=>lc.ICCode==iccode);
// if (loc == null)
// {
// resp.Message = "当前卡号没有存车！";
// return resp;
// }
// #endregion
//}
//else
//{
// #region
// loc = cwlctn.FindLocation(l=>l.PlateNum==iccode);
// if (loc == null)
// {
// resp.Message = "当前输入车牌没有存车！";
// return resp;
// }
// string proof = loc.ICCode;
// Customer cust = null;
// #region
// if (Convert.ToInt32(proof) >= 10000) //是指纹激活的
// {
// int sno = Convert.ToInt32(proof);
// FingerPrint print = new CWFingerPrint().Find(p => p.SN_Number == sno);
// if (print == null)
// {
// //上位控制系统故障
// resp.Message = "找不到注册指纹，系统异常！";
// return resp;
// }
// cust = new CWICCard().FindCust(print.CustID);
// if (cust == null)
// {
// //上位控制系统故障
// resp.Message = "指纹没有绑定用户，系统异常！";
// return resp;
// }
// }
// else
// {
// ICCard iccd = new CWICCard().Find(ic => ic.UserCode == proof);
// if (iccd == null)
// {
// //上位控制系统故障
// resp.Message = "上位控制系统异常，找不到卡号！";
// return resp;
// }
// if (iccd.CustID != 0)
// {
// cust = new CWICCard().FindCust(iccd.CustID);
// }
// }
// #endregion
// if (cust != null)
// {
// if (cust.Type != EnmICCardType.Temp)
// {
// resp.Message = "该用户不是临时用户！";
// return resp;
// }
// }
// #endregion
//}
#endregion
if (isPlate)
{
//是车牌
loc = cwlctn.FindLocation(l => l.PlateNum == iccode);
}
else
{
loc = cwlctn.FindLocation(l => l.ICCode == iccode);
}
if (loc == null)
{
resp.Message = "当前车牌没有存车！Proof - " + iccode;
return(resp);
}
int sno = Convert.ToInt32(loc.ICCode);
SaveCertificate scert = new CWSaveProof().Find(s => s.SNO == sno);
if (scert != null)
{
Customer cust = new CWICCard().FindCust(scert.CustID);
if (cust != null)
{
if (cust.Type != EnmICCardType.Temp)
{
resp.Message = "该用户不是临时用户！";
return(resp);
}
}
}
CWTask cwtask = new CWTask();
ImplementTask itask = cwtask.FindITask(tk => tk.ICCardCode == loc.ICCode && tk.IsComplete == 0);
if (itask != null)
{
resp.Message = "正在作业，无法查询！";
return(resp);
}
WorkTask queue = cwtask.FindQueue(q => q.ICCardCode == loc.ICCode);
if (queue != null)
{
resp.Message = "已经加入取车队列，无法查询！";
return(resp);
}
info.CCode = iccode;
info.InDate = loc.InDate.ToString();
info.OutDate = DateTime.Now.ToString();
TimeSpan span = DateTime.Now - loc.InDate;
info.SpanTime = (span.Days > 0 ? span.Days + "天" : " ") + (span.Hours > 0 ? span.Hours + "小时" : " ") +
(span.Minutes >= 0 ? span.Minutes + "分" : " ") + (span.Seconds >= 0 ? span.Seconds + "秒" : " ");
float fee = 0;
resp = this.CalculateTempFee(loc.InDate, DateTime.Now, out fee);
if (resp.Code == 0)
{
return(resp);
}
info.NeedFee = fee.ToString();
info.Warehouse = loc.Warehouse;
int hallID = new CWDevice().AllocateHall(loc, false);
info.HallID = hallID;
resp.Code = 1;
resp.Message = "查询成功";
resp.Data = info;
}
catch (Exception ex)
{
log.Error(ex.ToString());
}
return(resp);
}
/// <summary>
/// 依ETV作业范围，找出符合尺寸的车位
/// 如果是重列车位，则前面的车位，一定是空闲的
/// </summary>
/// <param name="etv"></param>
/// <returns></returns>
public Location AllocateLocOfEtvScope(Device etv, string checkcode)
{
CWLocation cwlctn = new CWLocation();
CWDevice cwdevice = new CWDevice();
CWTask cwtask = new CWTask();
CWICCard cwiccd = new CWICCard();
List<Device> nEtvList = cwdevice.FindList(d => d.Type == EnmSMGType.ETV);
WorkScope workscope = new WorkScope(nEtvList);
CScope scope = workscope.GetEtvScope(etv);
int etvColmn = Convert.ToInt32(etv.Address.Substring(1, 2));
List<Location> allLocsLst = cwlctn.FindLocList();
List<Customer> fixCustLst = cwiccd.FindCustList(cu => cu.Type == EnmICCardType.FixedLocation || cu.Type == EnmICCardType.VIP);
//排除固定车位
List<Location> suitLocsLst = allLocsLst.FindAll(lc => fixCustLst.Exists(cc => cc.LocAddress == lc.Address && cc.Warehouse == lc.Warehouse) == false);
var queryLstsmall = from loc in suitLocsLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkcode) == 1 &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null
orderby Math.Abs(loc.LocColumn - etvColmn) ascending,
loc.LocSide ascending
select loc;
List<Location> priorLocsLst = new List<Location>();
List<Location> nextLocsLst = new List<Location>();
foreach (Location loc in queryLstsmall)
{
if (loc.LocColumn >= scope.LeftCol && loc.LocColumn <= scope.RightCol)
{
#region
if (loc.LocSide == 2)
{
#region 如果后边的车位在作业，则最后分配
string bckAddrs = "4" + loc.Address.Substring(1);
Location back = cwlctn.FindLocation(l => l.Address == bckAddrs);
if (back != null)
{
if (back.Type == EnmLocationType.Normal)
{
if (back.Status == EnmLocationStatus.Space)
{
priorLocsLst.Add(loc);
}
else
{
nextLocsLst.Add(loc);
}
}
else if (back.Type == EnmLocationType.Disable)
{
priorLocsLst.Add(loc);
}
}
#endregion
}
else if (loc.LocSide == 4)
{
#region 如果是重列，则前面的车位一定是空闲的
string fwdAddrs = "2" + loc.Address.Substring(1);
Location forward = cwlctn.FindLocation(l => l.Address == fwdAddrs);
if (forward != null)
{
if (forward.Type == EnmLocationType.Normal &&
forward.Status == EnmLocationStatus.Space)
{
priorLocsLst.Add(loc);
}
}
#endregion
}
else if (loc.LocSide == 1)
{
priorLocsLst.Add(loc);
}
#endregion
}
}
if (priorLocsLst.Count > 0)
{
return priorLocsLst[0];
}
if (nextLocsLst.Count > 0)
{
return nextLocsLst[0];
}
var queryLstbig = from loc in suitLocsLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkcode) > 1 &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null
orderby Math.Abs(loc.LocColumn - etvColmn) ascending,
loc.LocSide ascending
select loc;
List<Location> priorLocsLstbig = new List<Location>();
List<Location> nextLocsLstbig = new List<Location>();
foreach (Location loc in queryLstbig)
{
if (loc.LocColumn >= scope.LeftCol && loc.LocColumn <= scope.RightCol)
{
#region
if (loc.LocSide == 2)
{
#region 如果后边的车位在作业，则最后分配
string bckAddrs = "4" + loc.Address.Substring(1);
Location back = cwlctn.FindLocation(l => l.Address == bckAddrs);
if (back != null)
{
if (back.Type == EnmLocationType.Normal)
{
if (back.Status == EnmLocationStatus.Space)
{
priorLocsLstbig.Add(loc);
}
else
{
nextLocsLstbig.Add(loc);
}
}
else if (back.Type == EnmLocationType.Disable)
{
priorLocsLstbig.Add(loc);
}
}
#endregion
}
else if (loc.LocSide == 4)
{
#region 如果是重列，则前面的车位一定是空闲的
string fwdAddrs = "2" + loc.Address.Substring(1);
Location forward = cwlctn.FindLocation(l => l.Address == fwdAddrs);
if (forward != null)
{
if (forward.Type == EnmLocationType.Normal &&
forward.Status == EnmLocationStatus.Space)
{
priorLocsLstbig.Add(loc);
}
}
#endregion
}
else if (loc.LocSide == 1)
{
priorLocsLstbig.Add(loc);
}
#endregion
}
}
if (priorLocsLstbig.Count > 0)
{
return priorLocsLstbig[0];
}
if (nextLocsLstbig.Count > 0)
{
return nextLocsLstbig[0];
}
return null;
}
/// <summary>
/// 存车时，分配车位及ETV
/// </summary>
/// <param name="checkCode">外形尺寸</param>
/// <param name="cust">顾客</param>
/// <param name="hall">车厅</param>
/// <param name="smg">ETV 设备号</param>
/// <returns></returns>
public Location IAllocateLocation(string checkCode, Customer cust, Device hall, out int smg)
{
Log log = LogFactory.GetLogger("AllocateLocation.IAllocateLocation");
smg = 0;
int warehouse = hall.Warehouse;
int hallCode = hall.DeviceCode;
int hallCol = Convert.ToInt32(hall.Address.Substring(1, 2));
Location lct = null;
CWTask cwtask = new CWTask();
CWLocation cwlctn = new CWLocation();
if (cust.Type == EnmICCardType.Temp ||
cust.Type == EnmICCardType.Periodical)
{
#region 判断是否是预定了车位
lct = cwlctn.FindLocation(cc => cc.Type == EnmLocationType.Normal && cc.Status == EnmLocationStatus.Book && cc.PlateNum == cust.PlateNum);
if (lct != null)
{
log.Info("当前车牌已预定车位，address-" + lct.Address + " ,wh- " + lct.Warehouse + " ,plate- " + cust.PlateNum + " ,cust- " + cust.UserName);
if (compareSize(lct.LocSize, checkCode) >= 0)
{
//分配ETV
Device dev = PXDAllocateEtvOfFixLoc(hall, lct);
if (dev != null)
{
smg = dev.DeviceCode;
}
return(lct);
}
else
{
log.Info("当前预定车位，address-" + lct.Address + " ,wh- " + lct.Warehouse + " ,locsize- " + lct.LocSize + ",carsize- " + checkCode + " 尺寸不合适，按临时卡分配");
//释放预定的车位
lct.Status = EnmLocationStatus.Space;
lct.PlateNum = "";
lct.InDate = DateTime.Parse("2017-1-1");
cwlctn.UpdateLocation(lct);
//按临时车位处理
lct = this.PXDAllocate(hall, checkCode, out smg);
}
}
else //没有预定车位，按临时车处理
{
lct = this.PXDAllocate(hall, checkCode, out smg);
}
#endregion
}
else if (cust.Type == EnmICCardType.FixedLocation)
{
if (cust.Warehouse != warehouse)
{
//车辆停在其他库区
cwtask.AddNofication(warehouse, hallCode, "16.wav");
return(null);
}
lct = new CWLocation().FindLocation(l => l.Warehouse == cust.Warehouse && l.Address == cust.LocAddress);
if (lct == null)
{
cwtask.AddNofication(warehouse, hallCode, "20.wav");
log.Error("固定车位时，依地址找不到对应车位，address - " + cust.LocAddress);
return(null);
}
if (lct != null)
{
if (compareSize(lct.LocSize, checkCode) < 0)
{
//车位尺寸与车辆不匹配
cwtask.AddNofication(warehouse, hallCode, "61.wav");
return(null);
}
}
if (lct.Type != EnmLocationType.Normal)
{
cwtask.AddNofication(warehouse, hallCode, "69.wav");
return(null);
}
//如果是重列车位，判断前面车位是否是正常的
if (lct.NeedBackup == 1)
{
string fwdaddrs = (lct.LocSide - 2).ToString() + lct.Address.Substring(1);
Location forward = new CWLocation().FindLocation(l => l.Address == fwdaddrs);
if (forward != null)
{
if (forward.Type != EnmLocationType.Normal)
{
//前面车位已被禁用
cwtask.AddNofication(warehouse, hallCode, "15.wav");
return(null);
}
}
}
//分配ETV
Device dev = PXDAllocateEtvOfFixLoc(hall, lct);
if (dev != null)
{
smg = dev.DeviceCode;
}
}
return(lct);
}
/// <summary>
/// 巷道堆垛临时卡车位分配
/// </summary>
/// <returns></returns>
private Location PXDAllocate(Device hall, string checkCode, out int smg)
{
smg = 0;
#region
CWLocation cwlctn = new CWLocation();
CWDevice cwdevice = new CWDevice();
CWTask cwtask = new CWTask();
CWICCard cwiccd = new CWICCard();
List <Device> nEtvList = cwdevice.FindList(d => d.Type == EnmSMGType.ETV);
WorkScope workscope = new WorkScope(nEtvList);
int hallColmn = Convert.ToInt32(hall.Address.Substring(1, 2));
List <Device> reachHall = new List <Device>();
#region 找出可达车厅、可用的ETV集合
foreach (Device dev in nEtvList)
{
CScope scope = workscope.GetEtvScope(dev);
if (scope.LeftCol <= hallColmn && hallColmn <= scope.RightCol)
{
if (dev.IsAble == 1)
{
reachHall.Add(dev);
}
}
}
#endregion
List <Location> lctnLst = new List <Location>();
#region 依距车厅的远近找出所有车位的集合
List <Location> allLocLst = cwlctn.FindLocList();
List <Customer> fixCustLst = cwiccd.FindCustList(cu => cu.Type == EnmICCardType.FixedLocation || cu.Type == EnmICCardType.VIP);
//排除固定车位
allLocLst = allLocLst.FindAll(lc => fixCustLst.Exists(cc => cc.LocAddress == lc.Address && cc.Warehouse == lc.Warehouse) == false);
#region 车位尺寸一致
List <Location> sameLctnLst = new List <Location>();
#region
#region 首先 分配与车厅同一个区域的，车位尺寸一致的， 4-2-1依次排列，
var L42_locList_small = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 1 &&
loc.LocSide != 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_small = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 1 &&
loc.LocSide == 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
sameLctnLst.AddRange(L42_locList_small);
sameLctnLst.AddRange(L1_locList_small);
#region 再次分配与车厅同一个区域，车位尺寸（仅宽度）偏大点的
var L42_locList_width = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 2 &&
loc.LocSide != 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_width = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 2 &&
loc.LocSide == 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
sameLctnLst.AddRange(L42_locList_width);
sameLctnLst.AddRange(L1_locList_width);
#region 再分配与车厅不是同一个区域的
//4边2边
var L42_locList_small_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 1 &&
loc.LocSide != 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_small_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 1 &&
loc.LocSide == 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
sameLctnLst.AddRange(L42_locList_small_dif);
sameLctnLst.AddRange(L1_locList_small_dif);
#region 再次分配与车厅不同区域，车位尺寸（仅宽度）偏大点的
var L42_locList_width_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 2 &&
loc.LocSide != 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_width_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 2 &&
loc.LocSide == 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
sameLctnLst.AddRange(L42_locList_width_dif);
sameLctnLst.AddRange(L1_locList_width_dif);
#endregion
#region 如果是重列车位，优先分配前面车位是空闲的，其次是占用的，最后才是执行中的
List <Location> spaceLctnLst = new List <Location>();
List <Location> occupyLctnLst = new List <Location>();
List <Location> otherLctnLst = new List <Location>();
foreach (Location loc in sameLctnLst)
{
if (loc.LocSide == 4)
{
#region 判断前面车位状态
string fwdAddrs = "2" + loc.Address.Substring(1);
Location forward = cwlctn.FindLocation(l => l.Address == fwdAddrs);
if (forward != null)
{
if (forward.Type == EnmLocationType.Normal)
{
if (forward.Status == EnmLocationStatus.Space)
{
spaceLctnLst.Add(loc);
}
else if (forward.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst.Add(loc);
}
else
{
otherLctnLst.Add(loc);
}
}
}
#endregion
}
else if (loc.LocSide == 2)
{
#region 判断后面车位状态
string bckAddrs = "4" + loc.Address.Substring(1);
Location back = cwlctn.FindLocation(l => l.Address == bckAddrs);
if (back != null)
{
if (back.Type == EnmLocationType.Normal)
{
if (back.Status == EnmLocationStatus.Space)
{
spaceLctnLst.Add(loc);
}
else if (back.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst.Add(loc);
}
else
{
otherLctnLst.Add(loc);
}
}
else //禁用的
{
spaceLctnLst.Add(loc);
}
}
#endregion
}
else
{
spaceLctnLst.Add(loc);
}
}
lctnLst.AddRange(spaceLctnLst);
lctnLst.AddRange(occupyLctnLst);
lctnLst.AddRange(otherLctnLst);
#endregion
#endregion
#region 车位尺寸是大的
List <Location> bigLctnLst = new List <Location>();
#region
#region 首先 分配与车厅同一个区域的，车位尺寸一致的， 4-2-1依次排列，
var L42_locList_big = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 3 &&
loc.LocSide != 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_big = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 3 &&
loc.LocSide == 1 &&
loc.Region == hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
bigLctnLst.AddRange(L42_locList_big);
bigLctnLst.AddRange(L1_locList_big);
#region 再分配与车厅不是同一个区域的
var L42_locList_big_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 3 &&
loc.LocSide != 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending,
loc.LocSide descending
select loc;
//1边
var L1_locList_big_dif = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, checkCode) == 3 &&
loc.LocSide == 1 &&
loc.Region != hall.Region
orderby Math.Abs(loc.LocColumn - hallColmn) ascending
select loc;
#endregion
bigLctnLst.AddRange(L42_locList_big_dif);
bigLctnLst.AddRange(L1_locList_big_dif);
#endregion
#region 如果是重列车位，优先分配前面车位是空闲的，其次是占用的，最后才是执行中的
List <Location> spaceLctnLst_big = new List <Location>();
List <Location> occupyLctnLst_big = new List <Location>();
List <Location> otherLctnLst_big = new List <Location>();
foreach (Location loc in bigLctnLst)
{
if (loc.LocSide == 4)
{
#region 判断前面车位状态
string fwdAddrs = "2" + loc.Address.Substring(1);
Location forward = cwlctn.FindLocation(l => l.Address == fwdAddrs);
if (forward != null)
{
if (forward.Type == EnmLocationType.Normal)
{
if (forward.Status == EnmLocationStatus.Space)
{
spaceLctnLst_big.Add(loc);
}
else if (forward.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst_big.Add(loc);
}
else
{
otherLctnLst_big.Add(loc);
}
}
}
#endregion
}
else if (loc.LocSide == 2)
{
#region 判断后面车位状态
string bckAddrs = "4" + loc.Address.Substring(1);
Location back = cwlctn.FindLocation(l => l.Address == bckAddrs);
if (back != null)
{
if (back.Type == EnmLocationType.Normal)
{
if (back.Status == EnmLocationStatus.Space)
{
spaceLctnLst_big.Add(loc);
}
else if (back.Status == EnmLocationStatus.Occupy)
{
occupyLctnLst_big.Add(loc);
}
else
{
otherLctnLst_big.Add(loc);
}
}
else //禁用的
{
spaceLctnLst_big.Add(loc);
}
}
#endregion
}
else
{
spaceLctnLst_big.Add(loc);
}
}
lctnLst.AddRange(spaceLctnLst_big);
lctnLst.AddRange(occupyLctnLst_big);
lctnLst.AddRange(otherLctnLst_big);
#endregion
#endregion
#endregion
if (reachHall.Count == 1)
{
CScope scope = workscope.GetEtvScope(reachHall[0]);
//只要一个ETV可达车厅，
//依作业范围，找出在TV范围内的车位
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
smg = reachHall[0].DeviceCode;
return(loc);
}
}
}
else if (reachHall.Count == 2)
{
//如果有两个空闲的
List <Device> freeEtvs = reachHall.FindAll(ch => ch.TaskID == 0);
if (freeEtvs.Count == 2)
{
#region
freeEtvs = reachHall.OrderBy(h => Math.Abs(h.Region - hall.Region)).ToList();
foreach (Device dev in freeEtvs)
{
CScope scope = workscope.GetEtvScope(dev);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
smg = dev.DeviceCode;
return(loc);
}
}
}
#endregion
}
else if (freeEtvs.Count == 1)
{
#region
Device dev = freeEtvs[0];
if (dev.Region == hall.Region)
{
#region
smg = dev.DeviceCode;
CScope scope = workscope.GetEtvScope(dev);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
#endregion
}
else
{
#region
//如果不是同一区域的
//判断另一个ETV在执行什么样的动作，
//另一台ETV要不要跨区作业
Device other = reachHall.Find(h => h.DeviceCode != dev.DeviceCode);
if (other.TaskID != 0)
{
ImplementTask task = cwtask.Find(other.TaskID);
if (task != null)
{
string toAddrs = "";
if (task.Status == EnmTaskStatus.TWaitforLoad ||
task.Status == EnmTaskStatus.TWaitforMove)
{
toAddrs = task.FromLctAddress;
}
else
{
toAddrs = task.ToLctAddress;
}
int toCol = Convert.ToInt32(toAddrs.Substring(1, 2));
//正在作业TV
int currCol = Convert.ToInt32(other.Address.Substring(1, 2));
//空闲TV
int freeCol = Convert.ToInt32(dev.Address.Substring(1, 2));
//空闲TV在右侧，即2号ETV空闲
if (currCol < freeCol)
{
#region TV2空闲
if (hallColmn >= toCol + 3)
{
//1#车厅不在范围内，则允许2#ETV动作
smg = dev.DeviceCode;
CScope scope = workscope.GetEtvScope(dev);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
}
#endregion
}
else
{
#region 1#TV空闲
if (hallColmn <= toCol - 3)
{
//2#车厅不在范围内，则允许1#ETV动作
smg = dev.DeviceCode;
CScope scope = workscope.GetEtvScope(dev);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
}
#endregion
}
}
}
#endregion
}
#endregion
}
List <Device> orderbyEtvs = reachHall.OrderBy(dr => Math.Abs(dr.Region - hall.Region)).ToList();
#region 两个都在忙或上述找不到时，则依车厅区域内的ETV优先，分配ETV
foreach (Device devc in orderbyEtvs)
{
CScope scope = workscope.GetEtvScope(devc);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
smg = devc.DeviceCode;
return(loc);
}
}
}
#endregion
}
#endregion
return(null);
}
/// <summary>
/// 巷道堆垛式---要生成挪移作业时，挪移车位的查找
/// </summary>
/// <param name="nEtv"></param>
/// <param name="frLct"></param>
/// <returns></returns>
public Location AllocateTvNeedTransfer(Device nEtv, Location frLct)
{
CWDevice cwdevice = new CWDevice();
CWLocation cwlctn = new CWLocation();
CWICCard cwiccd = new CWICCard();
int warehouse = nEtv.Warehouse;
List <Device> nEtvList = cwdevice.FindList(d => d.Type == EnmSMGType.ETV);
WorkScope workscope = new WorkScope(nEtvList);
CScope scope = workscope.GetEtvScope(nEtv);
List <Location> availLst = new List <Location>();
List <Location> backOccupyLst = new List <Location>();
List <Location> lctnLst = cwlctn.FindLocList();
//先找出相同区域的，尺寸一致的，如果是2边车位，则后面的车位不能是作业的车位
var query_same = from loc in lctnLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
loc.Region == frLct.Region &&
loc.LocSide != 4 &&
(compareSize(loc.LocSize, frLct.LocSize) == 1 ||
compareSize(loc.LocSize, frLct.LocSize) == 2) &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null
orderby Math.Abs(frLct.LocColumn - loc.LocColumn), loc.LocSide ascending
select loc;
foreach (Location loc in query_same)
{
if (loc.LocSide == 2)
{
string backAddrs = string.Format((loc.LocSide + 2).ToString() + loc.Address.Substring(1));
Location back = cwlctn.FindLocation(lc => lc.Address == backAddrs);
if (back != null)
{
if (back.Status == EnmLocationStatus.Space)
{
availLst.Add(loc);
}
else if (back.Status == EnmLocationStatus.Occupy)
{
backOccupyLst.Add(loc);
}
}
}
else
{
availLst.Add(loc);
}
}
availLst.AddRange(backOccupyLst);
//再找缓存车位
var query_temp = from loc in lctnLst
where loc.Type == EnmLocationType.Temporary &&
loc.Status == EnmLocationStatus.Space &&
compareSize(loc.LocSize, frLct.LocSize) > 0
orderby Math.Abs(loc.Region - frLct.Region)
select loc;
availLst.AddRange(query_temp);
//最后找不同区域的，尺寸一致的，如果是2边车位，则后面的车位不能是作业的车位
var query_diff = from loc in lctnLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
loc.Region != frLct.Region &&
loc.LocSide != 4 &&
(compareSize(loc.LocSize, frLct.LocSize) == 1 ||
compareSize(loc.LocSize, frLct.LocSize) == 2) &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null
orderby Math.Abs(frLct.LocColumn - loc.LocColumn), loc.LocSide ascending
select loc;
List <Location> backOccupyLst_Big = new List <Location>();
foreach (Location loc in query_diff)
{
if (loc.LocSide == 2)
{
string backAddrs = string.Format((loc.LocSide + 2).ToString() + loc.Address.Substring(1));
Location back = cwlctn.FindLocation(lc => lc.Address == backAddrs);
if (back != null)
{
if (back.Status == EnmLocationStatus.Space)
{
availLst.Add(loc);
}
else if (back.Status == EnmLocationStatus.Occupy)
{
backOccupyLst_Big.Add(loc);
}
}
}
else
{
availLst.Add(loc);
}
}
availLst.AddRange(backOccupyLst_Big);
foreach (Location loc in availLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
return(loc);
}
}
return(null);
}
/// <summary>
/// 没有任何作业时，如果缓存位被占用，则强制回挪，
/// TV分配，挪移车位分配
/// </summary>
/// <param name="frlct"></param>
/// <param name="tolct"></param>
/// <returns></returns>
public Device AllocateTvOfTransport(Location frlct, out Location toLct)
{
toLct = null;
CWDevice cwdevice = new CWDevice();
CWLocation cwlctn = new CWLocation();
CWICCard cwiccd = new CWICCard();
List <Device> nEtvList = cwdevice.FindList(d => d.Type == EnmSMGType.ETV);
WorkScope workscope = new WorkScope(nEtvList);
int locColmn = frlct.LocColumn;
List <Device> availableLst = new List <Device>();
#region 可达车位、可用的ETV集合
foreach (Device dev in nEtvList)
{
if (dev.IsAble == 1)
{
CScope scope = workscope.GetEtvScope(dev);
if (scope.LeftCol <= locColmn && locColmn <= scope.RightCol)
{
availableLst.Add(dev);
}
}
}
#endregion
List <Location> allLocLst = cwlctn.FindLocList();
var query = from loc in allLocLst
where loc.Type == EnmLocationType.Normal &&
loc.Status == EnmLocationStatus.Space &&
cwiccd.FindFixLocationByAddress(loc.Warehouse, loc.Address) == null &&
(loc.LocSide == 1 || loc.LocSide == 2) &&
compareSize(loc.LocSize, frlct.LocSize) > 0
orderby Math.Abs(frlct.LocColumn - loc.LocColumn),
loc.LocSide ascending
select loc;
List <Location> lctnLst = query.ToList();
if (availableLst.Count == 0)
{
return(null);
}
if (availableLst.Count == 1)
{
CScope scope = workscope.GetEtvScope(availableLst[0]);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
toLct = loc;
return(availableLst[0]);
}
}
}
else
{
List <Device> orderbyLst = availableLst.OrderBy(d => Math.Abs(d.Region - frlct.Region)).ToList();
foreach (Device dev in orderbyLst)
{
CScope scope = workscope.GetEtvScope(dev);
foreach (Location loc in lctnLst)
{
if (scope.LeftCol <= loc.LocColumn && loc.LocColumn <= scope.RightCol)
{
toLct = loc;
return(availableLst[0]);
}
}
}
}
return(null);
}
public LocStatInfo GetLocStatisInfo()
{
int total = 0;
int occupy = 0;
int space = 0;
int fix = 0;
int bspace = 0;
int sspace = 0;
try
{
CWICCard cwiccd = new CWICCard();
List <Location> locLst = new CWLocation().FindLocList();
List <Customer> custsLst = cwiccd.FindCustList(cu => cu.Type == EnmICCardType.FixedLocation || cu.Type == EnmICCardType.VIP);
for (int i = 0; i < locLst.Count; i++)
{
Location loc = locLst[i];
#region
if (loc.Type != EnmLocationType.Hall &&
loc.Type != EnmLocationType.Invalid)
{
total++;
}
bool isFixLoc = false;
if (custsLst.Exists(cc => cc.LocAddress == loc.Address && cc.Warehouse == loc.Warehouse))
{
fix++;
isFixLoc = true;
}
if (loc.Type == EnmLocationType.Normal)
{
if (loc.Status == EnmLocationStatus.Space)
{
if (!isFixLoc)
{
space++;
if (loc.LocSize.Length == 3)
{
string last = loc.LocSize.Substring(2);
if (last == "1")
{
sspace++;
}
else if (last == "2")
{
bspace++;
}
}
}
}
else if (loc.Status == EnmLocationStatus.Occupy)
{
occupy++;
}
}
#endregion
}
}
catch (Exception ex)
{
Log log = LogFactory.GetLogger("GetLocStatisInfoAsync");
log.Error(ex.ToString());
}
LocStatInfo info = new LocStatInfo();
info.Total = total;
info.Occupy = occupy;
info.Space = space;
info.SmallSpace = sspace;
info.BigSpace = bspace;
info.FixLoc = fix;
return(info);
}
/// <summary>
/// 数据入库
/// </summary>
/// <param name="orig"></param>
/// <returns></returns>
public Response LocationIn(Location orig)
{
Response resp = new Response();
int warehouse = orig.Warehouse;
string Addrs = orig.Address;
Location loc = new CWLocation().FindLocation(lc => lc.Warehouse == warehouse && lc.Address == Addrs);
if (loc == null)
{
resp.Message = "找不到车位-" + Addrs;
return(resp);
}
if (loc.Type != EnmLocationType.Normal)
{
resp.Message = "车位不可用，请使用另一个";
return(resp);
}
if (loc.Status != EnmLocationStatus.Space)
{
resp.Message = "当前车位不是空闲的，无法使用该车位！";
return(resp);
}
if (string.Compare(loc.LocSize, orig.CarSize) < 0)
{
resp.Message = "车位尺寸不匹配，无法完成操作！";
return(resp);
}
SaveCertificate scert = new SaveCertificate();
scert.IsFingerPrint = 2;
int proof = Convert.ToInt32(orig.ICCode);
if (proof >= 10000)
{
//是指纹时，找出是否注册了
FingerPrint fprint = new CWFingerPrint().Find(fp => fp.SN_Number == proof);
if (fprint == null)
{
resp.Message = "当前凭证是指纹编号，但库里找不到注册的指纹";
return(resp);
}
scert.Proof = fprint.FingerInfo;
scert.SNO = fprint.SN_Number;
scert.CustID = fprint.CustID;
}
else
{
ICCard iccode = new CWICCard().Find(ic => ic.UserCode == orig.ICCode);
if (iccode == null)
{
resp.Message = "请先注册当前卡号，再使用！";
return(resp);
}
if (iccode.Status != EnmICCardStatus.Normal)
{
resp.Message = "该卡已注销或挂失！";
return(resp);
}
scert.Proof = iccode.PhysicCode;
scert.SNO = Convert.ToInt32(iccode.UserCode);
scert.CustID = iccode.CustID;
}
#region 判断存车指纹库中，是否有该记录，如果有，则需更换信息
CWSaveProof cwsaveprooft = new CWSaveProof();
SaveCertificate svcert = cwsaveprooft.Find(s => s.Proof == scert.Proof);
if (svcert != null)
{
resp.Message = "存车指纹库中存在该记录，当前卡号不可用！";
return(resp);
}
#endregion
Location lctn = new CWLocation().FindLocation(l => l.ICCode == orig.ICCode);
if (lctn != null)
{
resp.Message = "该卡已被使用，车位 - " + lctn.Address;
return(resp);
}
ImplementTask itask = new CWTask().Find(tsk => tsk.ICCardCode == orig.ICCode);
if (itask != null)
{
resp.Message = "该卡正在作业，无法使用";
return(resp);
}
WorkTask wtask = new CWTask().FindQueue(wk => wk.ICCardCode == orig.ICCode);
if (wtask != null)
{
resp.Message = "该卡已加入队列，无法使用";
return(resp);
}
loc.Status = EnmLocationStatus.Occupy;
loc.ICCode = orig.ICCode;
loc.WheelBase = orig.WheelBase;
loc.CarSize = orig.CarSize;
loc.PlateNum = orig.PlateNum;
loc.InDate = orig.InDate;
loc.ImagePath = "";
resp = new CWLocation().UpdateLocation(loc);
string rcdmsg = "数据入库，卡号 - " + loc.ICCode + " 车位 - " + loc.Address + " 轴距 - " + loc.WheelBase + " 外形 - " + loc.CarSize;
OperateLog olog = new OperateLog
{
Description = rcdmsg,
CreateDate = DateTime.Now,
OptName = ""
};
new CWOperateRecordLog().AddOperateLog(olog);
//添加到指纹库中
cwsaveprooft.Add(scert);
#region 推送停车记录给云平台
ParkingRecord pkRecord = new ParkingRecord
{
TaskType = 0,
LocAddrs = loc.Address,
Proof = loc.ICCode,
PlateNum = loc.PlateNum,
carpicture = loc.ImagePath,
CarSize = Convert.ToInt32(loc.CarSize),
LocSize = Convert.ToInt32(loc.LocSize),
InDate = loc.InDate.ToString()
};
CloudCallback.Instance().WatchParkingRcd(pkRecord);
#endregion
return(resp);
}
/// <summary>
/// 数据出库
/// </summary>
/// <param name="wh"></param>
/// <param name="addrs"></param>
/// <returns></returns>
public Response LocationOut(int warehouse, string Addrs)
{
Response resp = new Response();
Location loc = FindLocation(lc => lc.Warehouse == warehouse && lc.Address == Addrs);
if (loc == null)
{
resp.Message = "找不到车位-" + Addrs;
return(resp);
}
#region 推送停车记录给云平台
ParkingRecord pkRecord = new ParkingRecord
{
TaskType = 1,
LocAddrs = loc.Address,
Proof = loc.ICCode,
PlateNum = loc.PlateNum,
carpicture = loc.ImagePath,
CarSize = string.IsNullOrEmpty(loc.CarSize) ? 0 : Convert.ToInt32(loc.CarSize),
LocSize = string.IsNullOrEmpty(loc.LocSize) ? 0 : Convert.ToInt32(loc.LocSize),
InDate = loc.InDate.ToString()
};
CloudCallback.Instance().WatchParkingRcd(pkRecord);
#endregion
string iccd = loc.ICCode;
loc.Status = EnmLocationStatus.Space;
loc.ICCode = "";
loc.WheelBase = 0;
loc.CarSize = "";
loc.InDate = DateTime.Parse("2017-1-1");
loc.PlateNum = "";
loc.ImagePath = "";
resp = new CWLocation().UpdateLocation(loc);
string rcdmsg = "数据出库，卡号 - " + iccd + " 车位 - " + loc.Address;
OperateLog olog = new OperateLog
{
Description = rcdmsg,
CreateDate = DateTime.Now,
OptName = ""
};
new CWOperateRecordLog().AddOperateLog(olog);
#region 除存车指纹库记录
if (!string.IsNullOrEmpty(iccd))
{
CWSaveProof cwsaveproof = new CWSaveProof();
int sno = Convert.ToInt32(iccd);
SaveCertificate scert = cwsaveproof.Find(d => d.SNO == sno);
if (scert != null)
{
cwsaveproof.Delete(scert.ID);
}
}
#endregion
return(resp);
}
