/// <inheritdoc />
public SCardError Transmit(IntPtr sendPci, byte[] sendBuffer, SCardPCI receivePci, ref byte[] receiveBuffer)
{
ThrowOnInvalidCardHandle();
var ioRecvPciPtr = IntPtr.Zero;
if (receivePci != null)
{
ioRecvPciPtr = receivePci.MemoryPtr;
}
var rc = Platform.Lib.Transmit(
_cardHandle,
sendPci,
sendBuffer,
ioRecvPciPtr,
receiveBuffer,
out var pcbRecvLength);
if (rc != SCardError.Success)
{
return(rc);
}
if (receiveBuffer != null && pcbRecvLength < receiveBuffer.Length)
{
Array.Resize(ref receiveBuffer, pcbRecvLength);
}
return(rc);
}
public SCardError Transmit(IntPtr pioSendPci,
byte[] sendBuffer,
int sendBufLength,
SCardPCI ioRecvPci,
byte[] recvBuffer,
ref int recvBufLength)
{
if (cardHandle.Equals(IntPtr.Zero))
{
throw new InvalidOperationException(
"Reader is currently not connected or no card handle has been returned.");
}
IntPtr ioRecvPciPtr = IntPtr.Zero;
if (ioRecvPci != null)
{
ioRecvPciPtr = ioRecvPci.iomem;
}
SCardError rc = SCardAPI.Lib.Transmit(cardHandle,
pioSendPci,
sendBuffer,
sendBufLength,
ioRecvPciPtr,
recvBuffer,
ref recvBufLength);
return(rc);
}
/// <inheritdoc />
public int Transmit(byte[] sendBuffer, byte[] receiveBuffer)
{
return(Transmit(
sendPci: SCardPCI.GetPci(Protocol),
sendBuffer: sendBuffer,
receiveBuffer: receiveBuffer));
}
/// <inheritdoc />
public int Transmit(IntPtr sendPci, byte[] sendBuffer, int sendBufferLength, SCardPCI receivePci,
byte[] receiveBuffer,
int receiveBufferLength)
{
var receivePciPointer = receivePci?.MemoryPtr ?? IntPtr.Zero;
return(Transmit(sendPci, sendBuffer, sendBufferLength, receivePciPointer, receiveBuffer,
receiveBufferLength));
}
/// <inheritdoc />
public int Transmit(SCardPCI sendPci, byte[] sendBuffer, int sendBufferLength, byte[] receiveBuffer,
int receiveBufferLength)
{
ThrowOnInvalidSendPci(sendPci);
var sendPciMemoryPtr = sendPci.MemoryPtr;
return(Transmit(sendPciMemoryPtr, sendBuffer, sendBufferLength, IntPtr.Zero, receiveBuffer,
receiveBufferLength));
}
/// <inheritdoc />
public int Transmit(SCardPCI sendPci, byte[] sendBuffer, int sendBufferLength, SCardPCI receivePci,
byte[] receiveBuffer,
int receiveBufferLength)
{
ThrowOnInvalidSendPci(sendPci);
var sendPciPointer = sendPci.MemoryPtr;
var receivePciPointer = receivePci?.MemoryPtr ?? IntPtr.Zero;
return(Transmit(sendPciPointer, sendBuffer, sendBufferLength, receivePciPointer, receiveBuffer,
receiveBufferLength));
}
private static void ThrowOnInvalidSendPci(SCardPCI sendPci)
{
if (sendPci == null)
{
throw new ArgumentNullException(nameof(sendPci));
}
if (sendPci.MemoryPtr == IntPtr.Zero)
{
throw new ArgumentException("Valid sendPci required", nameof(sendPci));
}
}
/// <inheritdoc />
public SCardError Transmit(byte[] sendBuffer, int sendBufferLength, byte[] receiveBuffer,
ref int receiveBufferLength)
{
var iorecvpci = new SCardPCI(); // will be discarded
return(Transmit(
SCardPCI.GetPci(ActiveProtocol),
sendBuffer,
sendBufferLength,
iorecvpci,
receiveBuffer,
ref receiveBufferLength));
}
/// <inheritdoc />
public int Transmit(SCardPCI sendPci, byte[] sendBuffer, byte[] receiveBuffer)
{
var sendBufferLength = sendBuffer?.Length ?? 0;
var receiveBufferLength = receiveBuffer?.Length ?? 0;
return(Transmit(
sendPci: sendPci,
sendBuffer: sendBuffer,
sendBufferLength: sendBufferLength,
receivePci: default(SCardPCI),
receiveBuffer: receiveBuffer,
receiveBufferLength: receiveBufferLength));
}
public SCardError Transmit(byte[] sendBuffer,
int sendBufferLength,
byte[] recvBuffer,
ref int recvBufferLength)
{
SCardPCI iorecvpci = new SCardPCI(); // will be discarded
return(Transmit(
SCardPCI.GetPci(activeprot),
sendBuffer,
sendBufferLength,
iorecvpci,
recvBuffer,
ref recvBufferLength));
}
/// <inheritdoc />
public SCardError Transmit(SCardPCI sendPci, byte[] sendBuffer, SCardPCI receivePci, ref byte[] receiveBuffer)
{
if (sendPci == null)
{
throw new ArgumentNullException(nameof(sendPci));
}
if (sendPci.MemoryPtr == IntPtr.Zero)
{
throw new ArgumentException("Valid sendPci required", nameof(sendPci));
}
return(Transmit(
sendPci.MemoryPtr,
sendBuffer,
receivePci,
ref receiveBuffer));
}
public SCardError Transmit(SCardPCI ioSendPci,
byte[] sendBuffer,
SCardPCI ioRecvPci,
ref byte[] recvBuffer)
{
if (ioSendPci == null)
{
throw new ArgumentNullException("ioSendPci");
}
if (ioSendPci.iomem == IntPtr.Zero)
{
throw new ArgumentException("ioSendPci");
}
return(Transmit(ioSendPci.iomem,
sendBuffer,
ioRecvPci,
ref recvBuffer));
}
protected ResponseApdu SendAPDU(CommandApdu apdu, SCardReader reader)
{
var receivePci = new SCardPCI(); // IO returned protocol control information.
var sendPci = SCardPCI.GetPci(reader.ActiveProtocol);
var receiveBuffer = new byte[256];
var command = apdu.ToArray();
SCardError sc = reader.Transmit(
sendPci, // Protocol Control Information (T0, T1 or Raw)
command, // command APDU
receivePci, // returning Protocol Control Information
ref receiveBuffer); // data buffer
if (sc != SCardError.Success)
{
// todo
return null;
}
return new ResponseApdu(receiveBuffer, IsoCase.Case2Short, reader.ActiveProtocol);
}
public SCardError Transmit(IntPtr pioSendPci,
byte[] sendBuffer,
SCardPCI ioRecvPci,
ref byte[] recvBuffer)
{
if (cardHandle.Equals(IntPtr.Zero))
{
throw new InvalidOperationException(
"Reader is currently not connected or no card handle has been returned.");
}
int pcbRecvLength;
IntPtr ioRecvPciPtr = IntPtr.Zero;
if (ioRecvPci != null)
{
ioRecvPciPtr = ioRecvPci.iomem;
}
SCardError rc = SCardAPI.Lib.Transmit(cardHandle,
pioSendPci,
sendBuffer,
ioRecvPciPtr,
recvBuffer,
out pcbRecvLength);
if (rc == SCardError.Success)
{
if (recvBuffer != null &&
pcbRecvLength < recvBuffer.Length)
{
Array.Resize <byte>(ref recvBuffer, (int)pcbRecvLength);
}
}
return(rc);
}
/// <summary>Sends an APDU to the smart card that was previously connected by <see cref="M:PCSC.ISCardReader.Connect(System.String,PCSC.SCardShareMode,PCSC.SCardProtocol)" />.</summary>
/// <param name="sendPci">Structure of Protocol Control Information.</param>
/// <param name="sendBuffer">APDU to send to the card.</param>
/// <param name="receivePci">Structure of protocol information.</param>
/// <param name="receiveBuffer">Response from the card.</param>
/// <returns>
/// <list type="table">
/// <listheader>
/// <term>Return value</term>
/// <description>Description</description>
/// </listheader>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.Success" />
/// </term>
/// <description> Successful (SCARD_S_SUCCESS)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InsufficientBuffer" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> are too big (SCARD_E_INSUFFICIENT_BUFFER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidHandle" />
/// </term>
/// <description>Invalid card handle (SCARD_E_INVALID_HANDLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidParameter" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> or <paramref name="sendPci" /> is <see langword="null" /> (SCARD_E_INVALID_PARAMETER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidValue" />
/// </term>
/// <description>Invalid Protocol, reader name, etc (SCARD_E_INVALID_VALUE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NoService" />
/// </term>
/// <description>The server is not runing (SCARD_E_NO_SERVICE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NotTransacted" />
/// </term>
/// <description>APDU exchange not successful (SCARD_E_NOT_TRANSACTED)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ProtocolMismatch" />
/// </term>
/// <description>Connect protocol is different than desired (SCARD_E_PROTO_MISMATCH)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ReaderUnavailable" />
/// </term>
/// <description>The reader has been removed (SCARD_E_READER_UNAVAILABLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.CommunicationError" />
/// </term>
/// <description>An internal communications error has been detected (SCARD_F_COMM_ERROR)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ResetCard" />
/// </term>
/// <description>The card has been reset by another application (SCARD_W_RESET_CARD)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.RemovedCard" />
/// </term>
/// <description>The card has been removed from the reader (SCARD_W_REMOVED_CARD)</description>
/// </item>
/// </list>
/// </returns>
/// <remarks>
/// <para>The card responds from the APDU and stores this response in <paramref name="receiveBuffer" />. <paramref name="sendPci" /> and <paramref name="receivePci" /> are structures containing the following (implemented in <see cref="T:PCSC.SCardPCI" />):
/// <example><code lang="C">
/// typedef struct {
/// DWORD dwProtocol; // SCARD_PROTOCOL_T0 or SCARD_PROTOCOL_T1
/// DWORD cbPciLength; // Length of this structure - not used
/// } SCARD_IO_REQUEST;
/// </code></example>
/// </para>
/// <para>It is recommended to use pre-defined / built-in PCI structures by calling one of the following methods:
/// <list type="bullet">
/// <item><term><see cref="M:PCSC.ISCardReader.Transmit(System.IntPtr,System.Byte[],PCSC.SCardPCI,System.Byte[]@)" /></term></item>
/// <item><term><see cref="M:PCSC.ISCardReader.Transmit(System.IntPtr,System.Byte[],System.Byte[]@)" /></term></item></list></para>
/// <para>This method calls the API function SCardTransmit(). The pointers to the pre-defined / built-in PCI structures are determinated with dlsym() on UNIX/Linux hosts and GetProcAddress() on Windows hosts.</para>
/// </remarks>
public SCardError Transmit(SCardPCI sendPci, byte[] sendBuffer, SCardPCI receivePci, ref byte[] receiveBuffer)
{
if (sendPci == null) {
throw new ArgumentNullException("sendPci");
}
if (sendPci.MemoryPtr == IntPtr.Zero) {
throw new ArgumentException("sendPci");
}
return Transmit(
sendPci.MemoryPtr,
sendBuffer,
receivePci,
ref receiveBuffer);
}
/// <summary>
/// Will try to connect to _connectedReader and read the card.
/// </summary>
/// <returns>Either the data from the card or the error message. Or if 'uidOnly' is true, just the UID prefixed with 'UID^' and ending with '^'</returns>
public string ReadCard(bool uidOnly = false)
{
SCardContext context = new SCardContext();
context.Establish(SCardScope.System);
SCardReader reader = new SCardReader(context);
SCardError result = reader.Connect(_connectedReader, SCardShareMode.Shared, SCardProtocol.Any);
if (result != SCardError.Success)
{
context.Dispose();
reader.Dispose();
return string.Format("No card is detected (or reader reserved by another application){0}{1}",
Environment.NewLine, SCardHelper.StringifyError(result));
}
string[] readerNames; SCardProtocol protocol; SCardState state; byte[] atr;
result = reader.Status(out readerNames, out state, out protocol, out atr);
if (result != SCardError.Success)
{
context.Dispose();
reader.Dispose();
return string.Format("Unable to read from card.{0}{1}", Environment.NewLine, SCardHelper.StringifyError(result));
}
string message = string.Format("Card detected:{0}Protocol: {1}{0}State: {2}{0}ATR: {3}{0}",
Environment.NewLine, protocol, state, BitConverter.ToString(atr ?? new byte[0]));
CommandApdu apdu = new CommandApdu(IsoCase.Case2Short, reader.ActiveProtocol)
{
CLA = 0xFF,
Instruction = InstructionCode.GetData,
P1 = 0x00,
P2 = 0x00,
Le = 0
};
result = reader.BeginTransaction();
if (result != SCardError.Success)
{
context.Dispose();
reader.Dispose();
return string.Format("Cannot start transaction.{0} {1}", Environment.NewLine, SCardHelper.StringifyError(result));
}
SCardPCI recievePci = new SCardPCI();
IntPtr sendPci = SCardPCI.GetPci(reader.ActiveProtocol);
byte[] recieveBuffer = new byte[256];
result = reader.Transmit(sendPci, apdu.ToArray(), recievePci, ref recieveBuffer);
if (result != SCardError.Success)
{
context.Dispose();
reader.Dispose();
return string.Format("Cannot transmit data.{0} {1}", Environment.NewLine, SCardHelper.StringifyError(result));
}
var responseApdu = new ResponseApdu(recieveBuffer, IsoCase.Case2Short, reader.ActiveProtocol);
message += string.Format("SW1: {1}{0}SW2: {2}{0}", Environment.NewLine, responseApdu.SW1, responseApdu.SW2);
string data = responseApdu.HasData ? BitConverter.ToString(responseApdu.GetData()) : "--";
if (uidOnly)
{
context.Dispose();
reader.Dispose();
return string.Format("UID^{0}^", data);
}
message += string.Format("UID: {0}",data);
reader.EndTransaction(SCardReaderDisposition.Leave);
reader.Disconnect(SCardReaderDisposition.Reset);
context.Dispose();
reader.Dispose();
return message;
}
private ResponseApdu _SimpleTransmit(byte[] cmdApdu, int cmdApduLength, IsoCase isoCase, SCardProtocol proto, SCardPCI recvPci, ref byte[] recvBuf, ref int recvBufLength)
{
SCardError sc = SCardError.UnknownError;
bool cmdSent = false;
do
{
// send Command APDU to the card
sc = reader.Transmit(
SCardPCI.GetPci(reader.ActiveProtocol),
cmdApdu,
cmdApduLength,
recvPci,
recvBuf,
ref recvBufLength);
// Do we need to resend the command APDU?
if (sc == SCardError.InsufficientBuffer &&
recvBuf.Length < recvBufLength)
{
// The response buffer was too small.
recvBuf = new byte[recvBufLength];
// Shall we wait until we re-send we APDU?
if (_retransmitWaitTime > 0)
Thread.Sleep(_retransmitWaitTime);
}
else
cmdSent = true;
} while (cmdSent == false);
if (sc == SCardError.Success)
{
ResponseApdu respApdu = new ResponseApdu(recvBuf, recvBufLength, isoCase, proto);
return respApdu;
}
// An error occurred, throw exception..
ThrowExceptionOnSCardError(sc);
return null;
}
public virtual Response Transmit(CommandApdu cmdApdu)
{
if (cmdApdu == null)
throw new ArgumentNullException("cmdApdu");
// prepare send buffer (Check Command APDU and convert it to an byte array)
byte[] sendbuf;
try
{
sendbuf = cmdApdu.ToArray();
}
catch (InvalidOperationException ex)
{
throw new InvalidApduException("Invalid APDU.", cmdApdu, ex);
}
catch (Exception ex)
{
throw ex;
}
// create Response object
Response resp = new Response();
// prepare receive buffer (Response APDU)
byte[] recvbuf = null;
int recvbuflen = cmdApdu.ExpectedResponseLength; // expected size that shall be returned
recvbuf = new byte[recvbuflen];
ResponseApdu respApdu = null;
SCardPCI recvPci = new SCardPCI();
respApdu = _SimpleTransmit(
sendbuf,
sendbuf.Length,
cmdApdu.Case, // ISO case used by the Command APDU
cmdApdu.Protocol, // Protocol used by the Command APDU
recvPci,
ref recvbuf,
ref recvbuflen);
/* Check status word SW1SW2:
*
* 1. 0x6cxx -> Set response buffer size Le <- SW2
* 2. AND/OR 0x61xx -> More data can be read with GET RESPONSE
*/
// Case 1: SW1=0x6c, Previous Le/P3 not accepted -> Set le = SW2
if (respApdu.SW1 == (byte)SW1Code.ErrorP3Incorrect)
{
CommandApdu resendCmdApdu = (CommandApdu)cmdApdu.Clone();
if (respApdu.SW2 == 0)
{
resendCmdApdu.Le = 0; // 256
recvbuflen = 256 + 2; // 2 bytes for status word
}
else
{
resendCmdApdu.Le = respApdu.SW2;
recvbuflen = respApdu.SW2 + 2; // 2 bytes for status word
}
recvbuf = new byte[recvbuflen];
recvPci = new SCardPCI();
try
{
sendbuf = resendCmdApdu.ToArray();
// Shall we wait until we re-send we APDU/TPDU?
if (_retransmitWaitTime > 0)
Thread.Sleep(_retransmitWaitTime);
// send Command APDU again with new Le value
respApdu = _SimpleTransmit(
sendbuf,
sendbuf.Length,
resendCmdApdu.Case,
resendCmdApdu.Protocol,
recvPci,
ref recvbuf,
ref recvbuflen);
}
catch (InvalidOperationException ex)
{
throw new InvalidApduException("Got SW1=0x6c. Retransmission failed because of an invalid APDU.", resendCmdApdu, ex);
}
}
// Case 2: SW1=0x61, More data available -> GET RESPONSE
if (respApdu.SW1 == (byte)SW1Code.NormalDataResponse)
{
/* The transmission system shall issue a GET RESPONSE command APDU (or TPDU)
* to the card by assigning the minimum of SW2 and Le to parameter Le (or P3)).
* Le = min(Le,SW2)
*/
int _le = (cmdApdu.Le < respApdu.SW2) ? cmdApdu.Le : respApdu.SW2;
do
{
// add the last ResponseAPDU to the Response object
resp.AddResponseApdu(respApdu);
resp.AddRecvPci(recvPci);
CommandApdu getResponseApdu = _constructGetResponseApdu(ref _le);
if (_le == 0)
recvbuflen = 256 + 2; // 2 bytes for status word
else
recvbuflen = _le + 2; // 2 bytes for status word
recvbuf = new byte[recvbuflen];
try
{
sendbuf = getResponseApdu.ToArray();
// Shall we wait until we re-send we APDU/TPDU?
if (_retransmitWaitTime > 0)
Thread.Sleep(_retransmitWaitTime);
// send Command APDU again with new Le value
respApdu = _SimpleTransmit(
sendbuf,
sendbuf.Length,
getResponseApdu.Case,
getResponseApdu.Protocol,
recvPci,
ref recvbuf,
ref recvbuflen);
}
catch (InvalidOperationException ex)
{
throw new InvalidApduException("Got SW1=0x61. Retransmission failed because of an invalid GET RESPONSE APDU.", getResponseApdu, ex);
}
// In case there is more data available.
_le = respApdu.SW2;
} while (
// More data available.
respApdu.SW1 == (byte)SW1Code.NormalDataResponse
||
// Warning condition: data may be corrupted. Iso7816-4 7.1.5
(respApdu.SW1 == (byte)SW1Code.WarningNVDataNotChanged &&
respApdu.SW2 == (byte)0x81)
);
}
resp.AddResponseApdu(respApdu);
resp.AddRecvPci(recvPci);
return resp;
}
/// <summary>Sends an APDU to the smart card that was previously connected by <see cref="M:PCSC.ISCardReader.Connect(System.String,PCSC.SCardShareMode,PCSC.SCardProtocol)" />. </summary>
/// <param name="sendBuffer">APDU to send to the card. </param>
/// <param name="sendBufferLength">The buffer size of <paramref name="sendBuffer" /> in bytes.</param>
/// <param name="receiveBuffer">Response from the card.</param>
/// <param name="receiveBufferLength">The buffer size of <paramref name="receiveBuffer" /> in bytes.</param>
/// <returns>
/// <list type="table">
/// <listheader>
/// <term>Return value</term>
/// <description>Description</description>
/// </listheader>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.Success" />
/// </term>
/// <description> Successful (SCARD_S_SUCCESS)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InsufficientBuffer" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> are too big (SCARD_E_INSUFFICIENT_BUFFER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidHandle" />
/// </term>
/// <description>Invalid card handle (SCARD_E_INVALID_HANDLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidParameter" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> is <see langword="null" /> (SCARD_E_INVALID_PARAMETER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidValue" />
/// </term>
/// <description>Invalid Protocol, reader name, etc (SCARD_E_INVALID_VALUE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NoService" />
/// </term>
/// <description>The server is not runing (SCARD_E_NO_SERVICE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NotTransacted" />
/// </term>
/// <description>APDU exchange not successful (SCARD_E_NOT_TRANSACTED)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ProtocolMismatch" />
/// </term>
/// <description>Connect protocol is different than desired (SCARD_E_PROTO_MISMATCH)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ReaderUnavailable" />
/// </term>
/// <description>The reader has been removed (SCARD_E_READER_UNAVAILABLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.CommunicationError" />
/// </term>
/// <description>An internal communications error has been detected (SCARD_F_COMM_ERROR)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ResetCard" />
/// </term>
/// <description>The card has been reset by another application (SCARD_W_RESET_CARD)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.RemovedCard" />
/// </term>
/// <description>The card has been removed from the reader (SCARD_W_REMOVED_CARD)</description>
/// </item>
/// </list>
/// </returns>
/// <remarks>
/// <para>The card responds from the APDU and stores this response in <paramref name="receiveBuffer" />. The buffer <paramref name="receiveBuffer" /> must be initialized. The size of the returned data will be stored in <paramref name="receiveBufferLength" />. This method will return with error code <see cref="F:PCSC.SCardError.InsufficientBuffer" /> if the buffer size of <paramref name="receiveBuffer" /> is too small for the result. If one of the parameters <paramref name="sendBufferLength" /> or <paramref name="receiveBufferLength" /> is invalid, the method will throw an <see cref="T:System.ArgumentOutOfRangeException" />.</para>
/// <para>This method calls the API function SCardTransmit().</para>
/// <block subset="none" type="note">
/// <para>This method will only work if the reader has been connected with one of the following protocols:
/// <list type="table">
/// <listheader><term>Protocol</term><description>Description</description></listheader>
/// <item><term><see cref="F:PCSC.SCardProtocol.T0" /></term><description>T=0 active protocol.</description></item>
/// <item><term><see cref="F:PCSC.SCardProtocol.T1" /></term><description>T=1 active protocol.</description></item>
/// <item><term><see cref="F:PCSC.SCardProtocol.Raw" /></term><description>Raw active protocol.</description></item>
/// </list></para>
/// </block>
/// </remarks>
public SCardError Transmit(byte[] sendBuffer, int sendBufferLength, byte[] receiveBuffer,
ref int receiveBufferLength) {
var iorecvpci = new SCardPCI(); // will be discarded
return Transmit(
SCardPCI.GetPci(ActiveProtocol),
sendBuffer,
sendBufferLength,
iorecvpci,
receiveBuffer,
ref receiveBufferLength);
}
public SCardError Transmit(IntPtr pioSendPci,
byte[] sendBuffer,
SCardPCI ioRecvPci,
ref byte[] recvBuffer)
{
if (cardHandle.Equals(IntPtr.Zero))
throw new InvalidOperationException(
"Reader is currently not connected or no card handle has been returned.");
int pcbRecvLength;
IntPtr ioRecvPciPtr = IntPtr.Zero;
if (ioRecvPci != null)
ioRecvPciPtr = ioRecvPci.iomem;
SCardError rc = SCardAPI.Lib.Transmit(cardHandle,
pioSendPci,
sendBuffer,
ioRecvPciPtr,
recvBuffer,
out pcbRecvLength);
if (rc == SCardError.Success)
{
if (recvBuffer != null &&
pcbRecvLength < recvBuffer.Length)
Array.Resize<byte>(ref recvBuffer, (int)pcbRecvLength);
}
return rc;
}
public SCardError Transmit(SCardPCI ioSendPci,
byte[] sendBuffer,
SCardPCI ioRecvPci,
ref byte[] recvBuffer)
{
if (ioSendPci == null)
throw new ArgumentNullException("ioSendPci");
if (ioSendPci.iomem == IntPtr.Zero)
throw new ArgumentException("ioSendPci");
return Transmit(ioSendPci.iomem,
sendBuffer,
ioRecvPci,
ref recvBuffer);
}
/// <summary>Sends an APDU to the smart card that was previously connected by <see cref="M:PCSC.ISCardReader.Connect(System.String,PCSC.SCardShareMode,PCSC.SCardProtocol)" />. </summary>
/// <param name="sendPci">A pointer to a pre-defined Structure of Protocol Control Information. You can use one of the following:
/// <list type="table"><listheader><term>Protocol Control Information</term><description>Description</description></listheader><item><term><see cref="P:PCSC.SCardPCI.T0" /></term><description>Pre-defined T=0 PCI structure. (SCARD_PCI_T0)</description></item><item><term><see cref="P:PCSC.SCardPCI.T1" /></term><description>Pre-defined T=1 PCI structure. (SCARD_PCI_T1)</description></item><item><term><see cref="P:PCSC.SCardPCI.Raw" /></term><description>Pre-defined RAW PCI structure. (SCARD_PCI_RAW)</description></item></list></param>
/// <param name="sendBuffer">APDU to send to the card. </param>
/// <param name="sendBufferLength">The buffer size of <paramref name="sendBuffer" /> in bytes.</param>
/// <param name="receivePci">Structure of protocol information. </param>
/// <param name="receiveBuffer">Response from the card.</param>
/// <param name="receiveBufferLength">The buffer size of <paramref name="receiveBuffer" /> in bytes.</param>
/// <returns>
/// <list type="table">
/// <listheader>
/// <term>Return value</term>
/// <description>Description</description>
/// </listheader>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.Success" />
/// </term>
/// <description> Successful (SCARD_S_SUCCESS)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InsufficientBuffer" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> are too big (SCARD_E_INSUFFICIENT_BUFFER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidHandle" />
/// </term>
/// <description>Invalid card handle (SCARD_E_INVALID_HANDLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidParameter" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> or <paramref name="sendPci" /> is <see langword="null" /> (SCARD_E_INVALID_PARAMETER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidValue" />
/// </term>
/// <description>Invalid Protocol, reader name, etc (SCARD_E_INVALID_VALUE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NoService" />
/// </term>
/// <description>The server is not runing (SCARD_E_NO_SERVICE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NotTransacted" />
/// </term>
/// <description>APDU exchange not successful (SCARD_E_NOT_TRANSACTED)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ProtocolMismatch" />
/// </term>
/// <description>Connect protocol is different than desired (SCARD_E_PROTO_MISMATCH)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ReaderUnavailable" />
/// </term>
/// <description>The reader has been removed (SCARD_E_READER_UNAVAILABLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.CommunicationError" />
/// </term>
/// <description>An internal communications error has been detected (SCARD_F_COMM_ERROR)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ResetCard" />
/// </term>
/// <description>The card has been reset by another application (SCARD_W_RESET_CARD)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.RemovedCard" />
/// </term>
/// <description>The card has been removed from the reader (SCARD_W_REMOVED_CARD)</description>
/// </item>
/// </list>
/// </returns>
/// <remarks>
/// <para>The card responds from the APDU and stores this response in <paramref name="receiveBuffer" />. The size of the returned data will be stored in <paramref name="receiveBufferLength" />. This method will return with error code <see cref="F:PCSC.SCardError.InsufficientBuffer" /> if the buffer size of <paramref name="receiveBuffer" /> is too small for the result. If one of the parameters <paramref name="sendBufferLength" /> or <paramref name="receiveBufferLength" /> is invalid, the method will throw an <see cref="T:System.ArgumentOutOfRangeException" />.</para>
/// <para>This method calls the API function SCardTransmit(). The pointers to the pre-defined / built-in PCI structures are determinated with dlsym() on UNIX/Linux hosts and GetProcAddress() on Windows hosts.</para>
/// </remarks>
public SCardError Transmit(IntPtr sendPci, byte[] sendBuffer, int sendBufferLength, SCardPCI receivePci,
byte[] receiveBuffer, ref int receiveBufferLength)
{
ThrowOnInvalidCardHandle();
var ioRecvPciPtr = IntPtr.Zero;
if (receivePci != null) {
ioRecvPciPtr = receivePci.MemoryPtr;
}
return Platform.Lib.Transmit(
_cardHandle,
sendPci,
sendBuffer,
sendBufferLength,
ioRecvPciPtr,
receiveBuffer,
ref receiveBufferLength);
}
/// <inheritdoc />
public SCardError Transmit(IntPtr sendPci, byte[] sendBuffer, int sendBufferLength, SCardPCI receivePci,
byte[] receiveBuffer, ref int receiveBufferLength)
{
ThrowOnInvalidCardHandle();
var ioRecvPciPtr = IntPtr.Zero;
if (receivePci != null)
{
ioRecvPciPtr = receivePci.MemoryPtr;
}
return(Platform.Lib.Transmit(
_cardHandle,
sendPci,
sendBuffer,
sendBufferLength,
ioRecvPciPtr,
receiveBuffer,
ref receiveBufferLength));
}
static void Main(string[] args)
{
SCardContext ctx = new SCardContext();
ctx.Establish(SCardScope.System);
string[] readernames = ctx.GetReaders();
if (readernames == null || readernames.Length < 1)
throw new Exception("You need at least one reader in order to run this example.");
// Show available readers.
Console.WriteLine("Available readers: ");
for (int i = 0; i < readernames.Length; i++)
Console.WriteLine("[" + i + "] " + readernames[i]);
int num = 0;
if (readernames.Length > 1)
{
// Ask the user which one to choose.
Console.Write("Which reader is an RFID reader? ");
string relin = Console.ReadLine();
if (!(int.TryParse(relin, out num))
|| num < 0
|| num > readernames.Length)
{
Console.WriteLine("An invalid number has been entered. Exiting.");
return;
}
}
string readername = readernames[num];
SCardReader RFIDReader = new SCardReader(ctx);
SCardError rc = RFIDReader.Connect(
readername,
SCardShareMode.Shared,
SCardProtocol.Any);
if (rc != SCardError.Success)
{
Console.WriteLine("Unable to connect to RFID card / chip. Error: " +
SCardHelper.StringifyError(rc));
return;
}
// prepare APDU
byte[] ucByteSend = new byte[]
{
0xFF, // the instruction class
0xCA, // the instruction code
0x00, // parameter to the instruction
0x00, // parameter to the instruction
0x00 // size of I/O transfer
};
byte[] ucByteReceive = new byte[10];
Console.Out.WriteLine("Retrieving the UID .... ");
rc = RFIDReader.BeginTransaction();
if (rc != SCardError.Success)
throw new Exception("Could not begin transaction.");
SCardPCI ioreq = new SCardPCI(); /* creates an empty object (null).
* IO returned protocol control information.
*/
IntPtr sendPci = SCardPCI.GetPci(RFIDReader.ActiveProtocol);
rc = RFIDReader.Transmit(
sendPci, /* Protocol control information, T0, T1 and Raw
* are global defined protocol header structures.
*/
ucByteSend, /* the actual data to be written to the card */
ioreq, /* The returned protocol control information */
ref ucByteReceive);
if (rc == SCardError.Success)
{
Console.Write("Uid: ");
for (int i = 0; i < (ucByteReceive.Length); i++)
Console.Write("{0:X2} ", ucByteReceive[i]);
Console.WriteLine("");
}
else
{
Console.WriteLine("Error: " + SCardHelper.StringifyError(rc));
}
RFIDReader.EndTransaction(SCardReaderDisposition.Leave);
RFIDReader.Disconnect(SCardReaderDisposition.Reset);
return;
}
/// <summary>Sends an APDU to the smart card that was previously connected by <see cref="M:PCSC.ISCardReader.Connect(System.String,PCSC.SCardShareMode,PCSC.SCardProtocol)" />. </summary>
/// <param name="sendPci">A pointer to a pre-defined Structure of Protocol Control Information. You can use one of the following:
/// <list type="table"><listheader><term>Protocol Control Information</term><description>Description</description></listheader><item><term><see cref="P:PCSC.SCardPCI.T0" /></term><description>Pre-defined T=0 PCI structure. (SCARD_PCI_T0)</description></item><item><term><see cref="P:PCSC.SCardPCI.T1" /></term><description>Pre-defined T=1 PCI structure. (SCARD_PCI_T1)</description></item><item><term><see cref="P:PCSC.SCardPCI.Raw" /></term><description>Pre-defined RAW PCI structure. (SCARD_PCI_RAW)</description></item></list></param>
/// <param name="sendBuffer">APDU to send to the card. </param>
/// <param name="receivePci">Structure of protocol information. </param>
/// <param name="receiveBuffer">Response from the card. </param>
/// <returns>
/// <list type="table">
/// <listheader>
/// <term>Return value</term>
/// <description>Description</description>
/// </listheader>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.Success" />
/// </term>
/// <description> Successful (SCARD_S_SUCCESS)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InsufficientBuffer" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> are too big (SCARD_E_INSUFFICIENT_BUFFER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidHandle" />
/// </term>
/// <description>Invalid card handle (SCARD_E_INVALID_HANDLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidParameter" />
/// </term>
/// <description>
/// <paramref name="sendBuffer" /> or <paramref name="receiveBuffer" /> or <paramref name="sendPci" /> is <see langword="null" /> (SCARD_E_INVALID_PARAMETER)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.InvalidValue" />
/// </term>
/// <description>Invalid Protocol, reader name, etc (SCARD_E_INVALID_VALUE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NoService" />
/// </term>
/// <description>The server is not runing (SCARD_E_NO_SERVICE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.NotTransacted" />
/// </term>
/// <description>APDU exchange not successful (SCARD_E_NOT_TRANSACTED)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ProtocolMismatch" />
/// </term>
/// <description>Connect protocol is different than desired (SCARD_E_PROTO_MISMATCH)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ReaderUnavailable" />
/// </term>
/// <description>The reader has been removed (SCARD_E_READER_UNAVAILABLE)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.CommunicationError" />
/// </term>
/// <description>An internal communications error has been detected (SCARD_F_COMM_ERROR)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.ResetCard" />
/// </term>
/// <description>The card has been reset by another application (SCARD_W_RESET_CARD)</description>
/// </item>
/// <item>
/// <term>
/// <see cref="F:PCSC.SCardError.RemovedCard" />
/// </term>
/// <description>The card has been removed from the reader (SCARD_W_REMOVED_CARD)</description>
/// </item>
/// </list>
/// </returns>
/// <remarks>
/// <para>The card responds from the APDU and stores this response in <paramref name="receiveBuffer" />. <paramref name="receivePci" /> is a structure containing the following (implemented in <see cref="T:PCSC.SCardPCI" />):
/// <example><code lang="C">
/// typedef struct {
/// DWORD dwProtocol; // SCARD_PROTOCOL_T0 or SCARD_PROTOCOL_T1
/// DWORD cbPciLength; // Length of this structure - not used
/// } SCARD_IO_REQUEST;
/// </code></example>
/// </para>
/// <para>This method calls the API function SCardTransmit(). The pointers to the pre-defined / built-in PCI structures are determinated with dlsym() on UNIX/Linux hosts and GetProcAddress() on Windows hosts.</para>
/// <example>
/// <code lang="C#">
/// // Create a new PC/SC context.
/// var ctx = new SCardContext();
/// ctx.Establish(SCardScope.System);
///
/// // Connect to the reader
/// var rfidReader = new SCardReader(ctx);
/// SCardError rc = rfidReader.Connect(
/// "OMNIKEY CardMan 5x21 00 01",
/// SCardShareMode.Shared,
/// SCardProtocol.T1);
///
/// if (rc != SCardError.Success) {
/// Console.WriteLine("Unable to connect to RFID card / chip. Error: " + SCardHelper.StringifyError(rc));
/// return;
/// }
///
/// // prepare APDU
/// byte[] ucByteSend = new byte[]
/// {
/// 0xFF, // the instruction class
/// 0xCA, // the instruction code
/// 0x00, // parameter to the instruction
/// 0x00, // parameter to the instruction
/// 0x00 // size of I/O transfer
/// };
///
/// rc = rfidReader.BeginTransaction();
/// if (rc != SCardError.Success) {
/// throw new Exception("Could not begin transaction.");
/// }
///
/// Console.Out.WriteLine("Retrieving the UID .... ");
///
/// SCardPCI ioreq = new SCardPCI(); // IO returned protocol control information.
/// byte[] ucByteReceive = new byte[10];
/// rc = rfidReader.Transmit(
/// SCardPCI.T1,// Protocol control information, T0, T1 and Raw
/// // are global defined protocol header structures.
/// ucByteSend, // the actual data to be written to the card
/// ioreq, // The returned protocol control information
/// ref ucByteReceive);
///
/// if (rc == SCardError.Success) {
/// Console.WriteLine("Uid: {0}", BitConverter.ToString(ucByteReceive));
/// } else {
/// Console.WriteLine("Error: " + SCardHelper.StringifyError(rc));
/// }
///
/// rfidReader.EndTransaction(SCardReaderDisposition.Leave);
/// rfidReader.Disconnect(SCardReaderDisposition.Reset);
/// ctx.Release()
/// </code>
/// </example>
/// </remarks>
public SCardError Transmit(IntPtr sendPci, byte[] sendBuffer, SCardPCI receivePci, ref byte[] receiveBuffer)
{
ThrowOnInvalidCardHandle();
int pcbRecvLength;
var ioRecvPciPtr = IntPtr.Zero;
if (receivePci != null) {
ioRecvPciPtr = receivePci.MemoryPtr;
}
var rc = Platform.Lib.Transmit(
_cardHandle,
sendPci,
sendBuffer,
ioRecvPciPtr,
receiveBuffer,
out pcbRecvLength);
if (rc != SCardError.Success) {
return rc;
}
if (receiveBuffer != null && pcbRecvLength < receiveBuffer.Length) {
Array.Resize(ref receiveBuffer, pcbRecvLength);
}
return rc;
}
public static void Main() {
using (var context = new SCardContext()) {
context.Establish(SCardScope.System);
var readerNames = context.GetReaders();
if (readerNames == null || readerNames.Length < 1) {
Console.WriteLine("You need at least one reader in order to run this example.");
Console.ReadKey();
return;
}
var readerName = ChooseRfidReader(readerNames);
if (readerName == null) {
return;
}
using (var rfidReader = new SCardReader(context)) {
var sc = rfidReader.Connect(readerName, SCardShareMode.Shared, SCardProtocol.Any);
if (sc != SCardError.Success) {
Console.WriteLine("Could not connect to reader {0}:\n{1}",
readerName,
SCardHelper.StringifyError(sc));
Console.ReadKey();
return;
}
var apdu = new CommandApdu(IsoCase.Case2Short, rfidReader.ActiveProtocol) {
CLA = 0xFF,
Instruction = InstructionCode.GetData,
P1 = 0x00,
P2 = 0x00,
Le = 0 // We don't know the ID tag size
};
sc = rfidReader.BeginTransaction();
if (sc != SCardError.Success) {
Console.WriteLine("Could not begin transaction.");
Console.ReadKey();
return;
}
Console.WriteLine("Retrieving the UID .... ");
var receivePci = new SCardPCI(); // IO returned protocol control information.
var sendPci = SCardPCI.GetPci(rfidReader.ActiveProtocol);
var receiveBuffer = new byte[256];
var command = apdu.ToArray();
sc = rfidReader.Transmit(
sendPci, // Protocol Control Information (T0, T1 or Raw)
command, // command APDU
receivePci, // returning Protocol Control Information
ref receiveBuffer); // data buffer
if (sc != SCardError.Success) {
Console.WriteLine("Error: " + SCardHelper.StringifyError(sc));
}
var responseApdu = new ResponseApdu(receiveBuffer, IsoCase.Case2Short, rfidReader.ActiveProtocol);
Console.Write("SW1: {0:X2}, SW2: {1:X2}\nUid: {2}",
responseApdu.SW1,
responseApdu.SW2,
responseApdu.HasData ? BitConverter.ToString(responseApdu.GetData()) : "No uid received");
rfidReader.EndTransaction(SCardReaderDisposition.Leave);
rfidReader.Disconnect(SCardReaderDisposition.Reset);
Console.ReadKey();
}
}
}
public SCardError Transmit(IntPtr pioSendPci,
byte[] sendBuffer,
int sendBufLength,
SCardPCI ioRecvPci,
byte[] recvBuffer,
ref int recvBufLength)
{
if (cardHandle.Equals(IntPtr.Zero))
throw new InvalidOperationException(
"Reader is currently not connected or no card handle has been returned.");
IntPtr ioRecvPciPtr = IntPtr.Zero;
if (ioRecvPci != null)
ioRecvPciPtr = ioRecvPci.iomem;
SCardError rc = SCardAPI.Lib.Transmit(cardHandle,
pioSendPci,
sendBuffer,
sendBufLength,
ioRecvPciPtr,
recvBuffer,
ref recvBufLength);
return rc;
}
/// <summary>
/// Retrieves the UID of a card that is currently connected to the given
/// reader.
/// </summary>
/// <param name="readername"></param>
/// <exception cref="Exception">Could not begin transaction.</exception>
private byte[] UidFromConnectedCard( string readername )
{
SCardReader rfidReader = new SCardReader( Context );
SCardError resultCode = rfidReader.Connect( readername, SCardShareMode.Shared, SCardProtocol.Any );
if( resultCode != SCardError.Success ) {
throw new Exception( "Unable to connect to RFID card / chip. Error: " + SCardHelper.StringifyError( resultCode ) );
}
// prepare APDU
byte[] payload = new byte[] {
0xFF, // the instruction class
0xCA, // the instruction code
0x00, // parameter to the instruction
0x00, // parameter to the instruction
0x00 // size of I/O transfer
};
byte[] receiveBuffer = new byte[10];
resultCode = rfidReader.BeginTransaction();
if( resultCode != SCardError.Success ) {
throw new Exception( "Could not begin transaction." );
}
SCardPCI ioreq = new SCardPCI();
IntPtr protocolControlInformation = SCardPCI.GetPci( rfidReader.ActiveProtocol );
resultCode = rfidReader.Transmit( protocolControlInformation, payload, ioreq, ref receiveBuffer );
if( resultCode != SCardError.Success ) {
Log.Error( SCardHelper.StringifyError( resultCode ) );
receiveBuffer = null;
}
rfidReader.EndTransaction( SCardReaderDisposition.Leave );
rfidReader.Disconnect( SCardReaderDisposition.Reset );
return receiveBuffer;
}
public SCardError Transmit(byte[] sendBuffer,
int sendBufferLength,
byte[] recvBuffer,
ref int recvBufferLength)
{
SCardPCI iorecvpci = new SCardPCI(); // will be discarded
return Transmit(
SCardPCI.GetPci(activeprot),
sendBuffer,
sendBufferLength,
iorecvpci,
recvBuffer,
ref recvBufferLength);
}
public string ReadSmartCard()
{
using (var context = new SCardContext())
{
context.Establish(SCardScope.System);
string readerName = null;
try
{
string[] readerNames = context.GetReaders();
readerName = readerNames[0];
}
catch(Exception ex)
{
return "error";
}
if (readerName == null)
{
return "error";
}
using (var rfidReader = new SCardReader(context))
{
var sc = rfidReader.Connect(readerName, SCardShareMode.Shared, SCardProtocol.Any);
if (sc != SCardError.Success)
{
return "error";//"Could not connect to reader {0}:\n{1}";
}
var apdu = new CommandApdu(IsoCase.Case2Short, rfidReader.ActiveProtocol)
{
CLA = 0xFF,
Instruction = InstructionCode.GetData,
P1 = 0x00,
P2 = 0x00,
Le = 0 // We don't know the ID tag size
};
sc = rfidReader.BeginTransaction();
if (sc != SCardError.Success)
{
return "none";// "Could not begin transaction.";
}
var receivePci = new SCardPCI(); // IO returned protocol control information.
var sendPci = SCardPCI.GetPci(rfidReader.ActiveProtocol);
var receiveBuffer = new byte[256];
var command = apdu.ToArray();
sc = rfidReader.Transmit(
sendPci, // Protocol Control Information (T0, T1 or Raw)
command, // command APDU
receivePci, // returning Protocol Control Information
ref receiveBuffer); // data buffer
if (sc != SCardError.Success)
{
return "none";//SCardHelper.StringifyError(sc);
}
var responseApdu = new ResponseApdu(receiveBuffer, IsoCase.Case2Short, rfidReader.ActiveProtocol);
rfidReader.EndTransaction(SCardReaderDisposition.Leave);
rfidReader.Disconnect(SCardReaderDisposition.Reset);
int id = responseApdu.HasData ? BitConverter.ToInt32(responseApdu.GetData(),0) : -1;
//int id = responseApdu.HasData ? System.Text.Encoding.UTF8.GetString(responseApdu.GetData()) : "none";
if (id < 0) id = id * (-1);
return id.ToString();
}
}
return "none";
}
