//Case 1016: 1.3.17_workflow_PostImportWithStompNotification
public void Run_WorkFlow_PostImportWithStompNotification_Case1016()
{
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
//Generic notification to used to stop the notification receiver
string stopMessageType = "Stop Receiving the Notification";
string stopMessageContent = "Stop Receiving the Notification";
// Stepup the notification receiver
NotificationSim.ReceiveNotification rn = new NotificationSim.ReceiveNotification();
//NotificationSim.ReceiveNotification rn = new NotificationSim.ReceiveNotification("10.112.39.167");
System.Collections.Generic.List<string> rms = new System.Collections.Generic.List<string>();
rms.Add("topic.patientCreated");
rms.Add("topic.postImportStarted");
rms.Add("topic.postImportCompleted");
rms.Add("topic.fmsCreated");
rms.Add("topic.imageCreated");
rms.Add("topic.simpleInstanceCreated");
rms.Add("topic.presentationStateInfoModified");
rn.startListon(rms, stopMessageType, stopMessageContent);
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("initListObjects", "First result of listObjects for the postImport");
CheckPoint p3 = new CheckPoint("endListObjects", "End result of listObjects for the postImport");
CheckPoint p4 = new CheckPoint("stompNotification", "Number of received stomp notification during postImport");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
ApplicationService ass = new ApplicationService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("createPatient");
XMLParameter pa2 = new XMLParameter("listObjects");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "listObjects":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
XMLResult step2_result = pats.listObjects(pa2);
//Log step2 service output
if (step2_result.Code != 800)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("initListObjects", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("initListObjects", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
//Step3 result
XMLResult step3_result = new XMLResult();
int countOfListObjectsLoop = 0;
do
{
System.Threading.Thread.Sleep(30000);
countOfListObjectsLoop++;
step3_result = pats.listObjects(pa2);
//Log step3 service output
if (step3_result.Code == 0)
{
p3.Result = TestResult.Pass;
p3.Outputs.AddParameter("endListObjects", "Success", step3_result.ResultContent);
break;
}
if (step3_result.IsErrorOccured && countOfListObjectsLoop > 2)
{
p3.Result = TestResult.Fail;
p3.Outputs.AddParameter("endListObjects", "Error", step3_result.ResultContent);
SaveRound(r);
break;
}
} while (true);
//Change input parameter according the output of Step3
//Step4 result
System.Threading.Thread.Sleep(500);
ass.sendGenericNotification(stopMessageType, stopMessageContent);
System.Threading.Thread.Sleep(1000);
int step4_result = rn.getNotificationNumber() - 1;
//Log step4 service output
if (ids.ExpectedValues.GetParameter("NumOfNotification").Value == step4_result.ToString())
{
p4.Result = TestResult.Pass;
foreach (string notification in rn.getNotificationContent())
{
p4.Outputs.AddParameter("Received notification number and content: " + rn.getNotificationContent().IndexOf(notification), "Success", notification);
}
}
else
{
p4.Result = TestResult.Fail;
p4.Outputs.AddParameter("Received notification number", "Error", step4_result.ToString());
foreach (string notification in rn.getNotificationContent())
{
p4.Outputs.AddParameter("Received notification number and content: " + rn.getNotificationContent().IndexOf(notification), "Error", notification);
}
}
//Save data for each round
SaveRound(r);
}
//Save service log as xml file
Output();
}
//Case 980: 1.3.17_workflow_CSI select a patient, open an image and then close it
public void Run_WorkFlow_CSIOpenImageAndClose_Case980()
{
// Test Case added for work flow: CSI select a patient to list all the image, click to open one of them and then save and close it.
PatientService patientService = new PatientService();
AcquisitionService acquisitionService = new AcquisitionService();
PresentationStateService presentationStateService = new PresentationStateService();
AnalysisService analysisService = new AnalysisService();
string patientUID = null;
XMLParameter setAsynAcqPatientInfoParam = new XMLParameter("acq_info");
XMLParameter listObjectForPSParam = new XMLParameter("filter");
XMLParameterCollection getPresentionStateInfoParam = new XMLParameterCollection();
XMLParameter listObjectForVolumeParam = new XMLParameter("filter");
XMLParameter listObjectForFMSParam = new XMLParameter("filter");
XMLParameter listObjectForOtherParam = new XMLParameter("filter");
XMLParameter setPresentationStateParam = new XMLParameter("presentationstate");
XMLParameter setPresentationStateInfoParam = new XMLParameter("presentationstate");
XMLParameter listObjectForAnalysisParam = new XMLParameter("filter");
XMLParameter setAnalysisInfoParam = new XMLParameter("analysis");
foreach (InputDataSet ids in this.Input.DataSets)
{
Round r = new Round();
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "getPatient")
{
if (ids.InputParameters.GetParameter(i).Key == "patientInternalID")
{
patientUID = ids.InputParameters.GetParameter(i).Value;
}
}
if (ids.InputParameters.GetParameter(i).Step == "setAsynAcqPatientInfo")
{
setAsynAcqPatientInfoParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "listObjectForPS")
{
listObjectForPSParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "listObjectForVolume")
{
listObjectForVolumeParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "listObjectForFMS")
{
listObjectForFMSParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "listObjectForOther")
{
listObjectForOtherParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "listObjectForAnalysis")
{
listObjectForAnalysisParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "setPresentationStateInfo")
{
setPresentationStateInfoParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "setAnalysisInfo")
{
setAnalysisInfoParam.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
}
#region Step 1: Check the specific patient exists in Database
CheckPoint pGetPatient = new CheckPoint("getPatient", "Step 1: Get the specific patient info");
r.CheckPoints.Add(pGetPatient);
XMLResult getPatientResult = patientService.getPatient(patientUID);
if (getPatientResult.IsErrorOccured)
{
pGetPatient.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Get the specific patient info fail:");
pGetPatient.Outputs.AddParameter("getPatient", "get the specific patient info", getPatientResult.Message);
SaveRound(r);
break;
}
else
{
pGetPatient.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Get the specific patient info succeed:");
pGetPatient.Outputs.AddParameter("getPatient", "get the specific patient info", getPatientResult.Message);
}
#endregion
// Step 2 - Step 7 are what to do after select a patient
#region Step 2: set asyn acq patient with the specific patient
CheckPoint pSetAsynAcqPatientInfo = new CheckPoint("setAsynAcqPatientInfo", "Step 2: call setAsynAcqPatientInfo to set asyn acq patient info");
r.CheckPoints.Add(pSetAsynAcqPatientInfo);
XMLResult setAsynAcqPatientInfoResult = acquisitionService.setAsynAcqPatientInfo(setAsynAcqPatientInfoParam);
if (setAsynAcqPatientInfoResult.IsErrorOccured)
{
pSetAsynAcqPatientInfo.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Set asyn acq PatientInfo fail:");
pSetAsynAcqPatientInfo.Outputs.AddParameter("setAsynAcqPatientInfo", "set asyn acq patient info", setAsynAcqPatientInfoResult.Message);
SaveRound(r);
break;
}
else
{
pSetAsynAcqPatientInfo.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Set asyn acq PatientInfo succeed:");
pSetAsynAcqPatientInfo.Outputs.AddParameter("setAsynAcqPatientInfo", "set asyn acq patient info", setAsynAcqPatientInfoResult.Message);
}
#endregion
#region Step 3: Call listObject to get the presentation state list of the patient
CheckPoint pListObjectForPS = new CheckPoint("listObjectForPS", "Step 3: call listObject to get PS info");
r.CheckPoints.Add(pListObjectForPS);
XMLResult listObjectForPSResult = patientService.listObjects(listObjectForPSParam);
if (listObjectForPSResult.IsErrorOccured)
{
pListObjectForPS.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get PS info fail:");
pListObjectForPS.Outputs.AddParameter("listObject", "listObject to get PS", listObjectForPSResult.Message);
SaveRound(r);
break;
}
else
{
pListObjectForPS.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get PS info succeed:");
pListObjectForPS.Outputs.AddParameter("listObject", "listObject to get PS", listObjectForPSResult.Message);
}
#endregion
#region Step 4: Call getPresentationStateInfo to get the presentationstate info according to the presentationstate internal_id
CheckPoint pGetPresentionStateInfo = new CheckPoint("getPresentionStateInfo", "Step 4: call getPresentationStateInfo to get presention state info");
r.CheckPoints.Add(pGetPresentionStateInfo);
foreach (XMLParameter param in listObjectForPSResult.MultiResults)
{
getPresentionStateInfoParam.Add(param);
}
XMLResult getPresentationStateInfoResult = presentationStateService.getPresentationStateInfo(getPresentionStateInfoParam);
if (getPresentationStateInfoResult.IsErrorOccured)
{
pGetPresentionStateInfo.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call getPresentationStateInfo to get PS info fail:");
pGetPresentionStateInfo.Outputs.AddParameter("getPresentationStateInfo", "getPresentationStateInfo to get PS info", getPresentationStateInfoResult.Message);
SaveRound(r);
break;
}
else
{
pGetPresentionStateInfo.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call getPresentationStateInfo to get PS info succeed:");
pGetPresentionStateInfo.Outputs.AddParameter("getPresentationStateInfo", "getPresentationStateInfo to get PS info", getPresentationStateInfoResult.Message);
}
#endregion
#region Step 5: Call listObject to get the volume list of the patient
CheckPoint pListObjectForVolume = new CheckPoint("listObjectForVolume", "Step 5: call listObject to get volume info");
r.CheckPoints.Add(pListObjectForVolume);
XMLResult listObjectForVolumeResult = patientService.listObjects(listObjectForVolumeParam);
if (listObjectForVolumeResult.IsErrorOccured)
{
pListObjectForVolume.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get volume info fail:");
pListObjectForVolume.Outputs.AddParameter("listObject", "listObject to get volume", listObjectForVolumeResult.Message);
SaveRound(r);
break;
}
else
{
pListObjectForVolume.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get volume info succeed:");
pListObjectForVolume.Outputs.AddParameter("listObject", "listObject to get volume", listObjectForVolumeResult.Message);
}
#endregion
#region Step 6: Call listObject to get the FMS list of the patient
CheckPoint pListObjectForFMS = new CheckPoint("listObjectForFMS", "Step 6: call listObject to get FMS info");
r.CheckPoints.Add(pListObjectForFMS);
XMLResult listObjectForFMSResult = patientService.listObjects(listObjectForFMSParam);
if (listObjectForFMSResult.IsErrorOccured)
{
pListObjectForFMS.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get FMS info fail:");
pListObjectForFMS.Outputs.AddParameter("listObject", "listObject to get FMS", listObjectForFMSResult.Message);
SaveRound(r);
break;
}
else
{
pListObjectForFMS.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get FMS info succeed:");
pListObjectForFMS.Outputs.AddParameter("listObject", "listObject to get FMS", listObjectForFMSResult.Message);
}
#endregion
#region Step 7: Call listObject to get the other info of the patient
CheckPoint pListObjectForOther = new CheckPoint("listObjectForOther", "Step 7: call listObject to get other info");
r.CheckPoints.Add(pListObjectForOther);
XMLResult listObjectForOtherResult = patientService.listObjects(listObjectForOtherParam);
if (listObjectForOtherResult.IsErrorOccured)
{
pListObjectForOther.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get other info fail:");
pListObjectForOther.Outputs.AddParameter("listObject", "listObject to get other", listObjectForOtherResult.Message);
SaveRound(r);
break;
}
else
{
pListObjectForOther.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get other info succeed:");
pListObjectForOther.Outputs.AddParameter("listObject", "listObject to get other", listObjectForOtherResult.Message);
}
#endregion
// After double click an image to open it, it will repeat step 3 to step 7
// When open image, it will call getPresentationState to get the presentation state, which can be used in setPresentationState step later
string presentationStateInternalID = null;
XMLParameterCollection setPresentationStateParamList = new XMLParameterCollection();
foreach (XMLParameterNode psNode in listObjectForPSResult.ArrayResult.Parameters)
{
presentationStateInternalID = psNode.ParameterValue;
XMLResult getPresentationStateResult = presentationStateService.getPresentationState(presentationStateInternalID);
setPresentationStateParam = getPresentationStateResult.ArrayResult;
setPresentationStateParamList.Add(setPresentationStateParam);
}
// Close the image, it will do step 8 to step 10
#region Step 8: Call setPresentationState to set presentation state, not change the presentation state value, just set it back
CheckPoint pSetPresentationState = new CheckPoint("setPresentationState", "Step 8: call setPresentationState to set the presentation state after close the image");
r.CheckPoints.Add(pSetPresentationState);
XMLResult setPresentationStateResult = new XMLResult();
foreach (XMLParameter presentationStateInfo in setPresentationStateParamList)
{
setPresentationStateResult = presentationStateService.setPresentationState(presentationStateInfo, presentationStateInternalID);
if (setPresentationStateResult.IsErrorOccured)
{
pSetPresentationState.Result = TestResult.Fail;
break;
}
else
{
pSetPresentationState.Result = TestResult.Pass;
}
}
if (pSetPresentationState.Result == TestResult.Fail)
{
System.Diagnostics.Debug.Print("Call setPresentationState to set presentation state fail:");
pSetPresentationState.Outputs.AddParameter("setPresentationState", "setPresentationState to set presentation state", setPresentationStateResult.Message);
SaveRound(r);
break;
}
else
{
System.Diagnostics.Debug.Print("Call setPresentationState to set presentation state succeed:");
pSetPresentationState.Outputs.AddParameter("setPresentationState", "setPresentationState to set presentation state", setPresentationStateResult.Message);
}
#endregion
#region Step 9: Call setPresentationStateInfo to set the presentation state info
CheckPoint pSetPresentationStateInfo = new CheckPoint("setPresentationStateInfo", "Step 9: call setPresentationStateInfo to set the presentation state info after close the image");
r.CheckPoints.Add(pSetPresentationStateInfo);
XMLResult setPresentationStateInfoResult = new XMLResult();
foreach (XMLParameter presentationStateInfoParam in getPresentationStateInfoResult.MultiResults)
{
presentationStateInternalID = presentationStateInfoParam.GetParameterValueByName("internal_id");
setPresentationStateInfoResult = presentationStateService.setPresentationStateInfo(setPresentationStateInfoParam, presentationStateInternalID);
if (setPresentationStateInfoResult.IsErrorOccured)
{
pSetPresentationStateInfo.Result = TestResult.Fail;
break;
}
else
{
pSetPresentationStateInfo.Result = TestResult.Pass;
}
}
if (pSetPresentationStateInfo.Result == TestResult.Fail)
{
System.Diagnostics.Debug.Print("Call setPresentationStateInfo to set presentation state info fail:");
pSetPresentationStateInfo.Outputs.AddParameter("setPresentationStateInfo", "setPresentationState to set presentation state info", setPresentationStateInfoResult.Message);
SaveRound(r);
break;
}
else
{
System.Diagnostics.Debug.Print("Call setPresentationStateInfo to set presentation state info succeed:");
pSetPresentationStateInfo.Outputs.AddParameter("setPresentationState", "setPresentationState to set presentation state info", setPresentationStateInfoResult.Message);
}
#endregion
#region Step 10: Call listObject to get the presentation state
CheckPoint pListObjectForPS2 = new CheckPoint("listObjectForPS", "Step 10: call listObject to get PS info after close image");
r.CheckPoints.Add(pListObjectForPS2);
XMLResult listObjectForPSResult2 = patientService.listObjects(listObjectForPSParam);
if (listObjectForPSResult2.IsErrorOccured)
{
pListObjectForPS.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get PS info fail:");
pListObjectForPS2.Outputs.AddParameter("listObject", "listObject to get PS", listObjectForPSResult2.Message);
SaveRound(r);
break;
}
else
{
pListObjectForPS2.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get PS info succeed:");
pListObjectForPS2.Outputs.AddParameter("listObject", "listObject to get PS", listObjectForPSResult2.Message);
}
#endregion
#region Step 11: Call getPresentationStateInfo to get the presentation state info
CheckPoint pGetPresentionStateInfo2 = new CheckPoint("getPresentionStateInfo", "Step 11: call getPresentationStateInfo to get presention state info after close image");
r.CheckPoints.Add(pGetPresentionStateInfo2);
XMLResult getPresentationStateInfoResult2 = presentationStateService.getPresentationStateInfo(getPresentionStateInfoParam);
if (getPresentationStateInfoResult2.IsErrorOccured)
{
pGetPresentionStateInfo2.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call getPresentationStateInfo to get PS info fail:");
pGetPresentionStateInfo2.Outputs.AddParameter("getPresentationStateInfo", "getPresentationStateInfo to get PS info", getPresentationStateInfoResult2.Message);
SaveRound(r);
break;
}
else
{
pGetPresentionStateInfo2.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call getPresentationStateInfo to get PS info succeed:");
pGetPresentionStateInfo2.Outputs.AddParameter("getPresentationStateInfo", "getPresentationStateInfo to get PS info", getPresentationStateInfoResult2.Message);
}
#endregion
// Close the viewer
#region Step 12: Call listObject to get the analysis
CheckPoint pListObjectForAnalysis = new CheckPoint("listObjectForAnalysis", "Step 12: call listObject to get analysis info");
r.CheckPoints.Add(pListObjectForAnalysis);
XMLResult listObjectForAnalysisResult = patientService.listObjects(listObjectForAnalysisParam);
if (listObjectForAnalysisResult.IsErrorOccured)
{
pListObjectForAnalysis.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call listObject to get analysis info fail:");
pListObjectForAnalysis.Outputs.AddParameter("listObject", "listObject to get analysis", listObjectForAnalysisResult.Message);
SaveRound(r);
break;
}
else
{
pListObjectForAnalysis.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call listObject to get analysis info succeed:");
pListObjectForAnalysis.Outputs.AddParameter("listObject", "listObject to get analysis", listObjectForAnalysisResult.Message);
}
#endregion
string analysisId = null;
analysisId = listObjectForAnalysisResult.SingleResult;
if (analysisId == null || analysisId == string.Empty)
{
// Below Step are excuted when there is no analysis before
#region Step 13: createAnalysis
CheckPoint pCreateAnalysis = new CheckPoint("createAnalysis", "Step 13: call createAnalysis to create new analysis");
r.CheckPoints.Add(pCreateAnalysis);
XMLResult createAnalysisResult = new XMLResult();
XMLParameter analysisXml = new XMLParameter("analysis");
XMLParameterCollection uidsXml = new XMLParameterCollection();
XMLParameter presentationStateUids = new XMLParameter("presentationstate");
XMLParameter fmsUids = new XMLParameter("fms");
uidsXml.Add(presentationStateUids);
uidsXml.Add(fmsUids);
createAnalysisResult = analysisService.createAnalysis(analysisXml.GenerateXML().ToString(), true, true, patientUID, null, uidsXml);
// public XMLResult createAnalysis(string analysisXml, bool current, bool currentSpecified, string patientInternalID, string thumbnail, XMLParameterCollection uidsXml);
if (createAnalysisResult.IsErrorOccured)
{
System.Diagnostics.Debug.Print("Call createAnalysis to create analysis fail:");
pCreateAnalysis.Outputs.AddParameter("createAnalysis", "createAnalysis to create analysis", createAnalysisResult.Message);
SaveRound(r);
break;
}
else
{
System.Diagnostics.Debug.Print("Call createAnalysis to create analysis succeed:");
pCreateAnalysis.Outputs.AddParameter("createAnalysis", "createAnalysis to create analysis", createAnalysisResult.Message);
}
#endregion
#region Step 14: Call AnalysisService.setAnalysisInfo to set the analysis info
CheckPoint pSetAnalysisInfo = new CheckPoint("setAnalysisInfo", "Step 14: call setAnalysisInfo to set the analysis info");
r.CheckPoints.Add(pSetAnalysisInfo);
XMLResult setAnalysisInfoResult = new XMLResult();
analysisId = createAnalysisResult.MultiResults[0].GetParameterValueByName("internal_id");
setAnalysisInfoResult = analysisService.setAnalysisInfo(analysisId, setAnalysisInfoParam);
if (setAnalysisInfoResult.IsErrorOccured)
{
System.Diagnostics.Debug.Print("Call setAnalysisInfo to set analysis info fail:");
pSetAnalysisInfo.Outputs.AddParameter("setAnalysisInfo", "setAnalysisInfo to set analysis info", setAnalysisInfoResult.Message);
SaveRound(r);
break;
}
else
{
System.Diagnostics.Debug.Print("Call setAnalysisInfo to set analysis info succeed:");
pSetAnalysisInfo.Outputs.AddParameter("setAnalysisInfo", "setAnalysisInfo to set analysis info", setAnalysisInfoResult.Message);
}
#endregion
}
else
{
// Below Step 15 to Step 17 are excuted when there is analysis exist before...
#region Step 15: Call AnalysisService.getAnalysisInfo to get the analysis info
CheckPoint pGetAnalysisInfo = new CheckPoint("getAnalysisInfo", "Step 15: call getAnalysisInfo to get the analysis info");
r.CheckPoints.Add(pGetAnalysisInfo);
XMLResult getAnalysisInfoResult = new XMLResult();
getAnalysisInfoResult = analysisService.getAnalysisInfo(analysisId);
if (getAnalysisInfoResult.IsErrorOccured)
{
pGetAnalysisInfo.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call getAnalysisInfo to get analysis info fail:");
pGetAnalysisInfo.Outputs.AddParameter("getAnalysisInfo", "getAnalysisInfo to get analysis info", getAnalysisInfoResult.Message);
SaveRound(r);
break;
}
else
{
pGetAnalysisInfo.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call getAnalysisInfo to get analysis info succeed:");
pGetAnalysisInfo.Outputs.AddParameter("getAnalysisInfo", "getAnalysisInfo to get analysis info", getAnalysisInfoResult.Message);
}
#endregion
#region Step 16: Call AnalysisService.setAnalysisDescription to set analysis description
CheckPoint pSetAnalysisDescription = new CheckPoint("setAnalysisDescription", "Step 16: call setAnalysisDescription to set the analysis description");
r.CheckPoints.Add(pSetAnalysisDescription);
XMLResult setAnalysisDescriptionResult = new XMLResult();
XMLParameter analysisXml = new XMLParameter("analysis");
XMLParameterCollection uidsXml = new XMLParameterCollection();
XMLParameter presentationStateUids = new XMLParameter("presentationstate");
XMLParameter fmsUids = new XMLParameter("fms");
uidsXml.Add(presentationStateUids);
uidsXml.Add(fmsUids);
setAnalysisDescriptionResult = analysisService.setAnalysisDescription(analysisId, analysisXml.GenerateXML(), false, uidsXml);
if (setAnalysisDescriptionResult.IsErrorOccured)
{
pSetAnalysisDescription.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call setAnalysisDescription to set the analysis description fail:");
pSetAnalysisDescription.Outputs.AddParameter("setAnalysisDescription", "call set the analysis description", setAnalysisDescriptionResult.Message);
SaveRound(r);
break;
}
else
{
pSetAnalysisDescription.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call setAnalysisDescription to set the analysis description succeed:");
pSetAnalysisDescription.Outputs.AddParameter("setAnalysisDescription", "call set the analysis description", setAnalysisDescriptionResult.Message);
}
#endregion
#region Step 17: Call AnalysisService.setAnalysisInfo to set the analysis info
CheckPoint pSetAnalysisInfo = new CheckPoint("setAnalysisInfo", "Step 17: call setAnalysisInfo to set the analysis info");
r.CheckPoints.Add(pSetAnalysisInfo);
XMLResult setAnalysisInfoResult = new XMLResult();
setAnalysisInfoResult = analysisService.setAnalysisInfo(analysisId, setAnalysisInfoParam);
if (setAnalysisInfoResult.IsErrorOccured)
{
pSetAnalysisInfo.Result = TestResult.Fail;
System.Diagnostics.Debug.Print("Call setAnalysisInfo to set analysis info fail:");
pSetAnalysisInfo.Outputs.AddParameter("setAnalysisInfo", "setAnalysisInfo to set analysis info", setAnalysisInfoResult.Message);
SaveRound(r);
break;
}
else
{
pSetAnalysisInfo.Result = TestResult.Pass;
System.Diagnostics.Debug.Print("Call setAnalysisInfo to set analysis info succeed:");
pSetAnalysisInfo.Outputs.AddParameter("setAnalysisInfo", "setAnalysisInfo to set analysis info", setAnalysisInfoResult.Message);
}
#endregion
}
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
}
Output();
}
//Case 512: 1.2.3_ImportZip_Normal
public void Run_Import_Zip_Case512()
{
int runCount = 0;
string patientUID = string.Empty;
bool isCreatePatient = false;
bool isDeletePatient = false;
foreach (InputDataSet ids in this.Input.DataSets)
{
isCreatePatient = false;
isDeletePatient = false;
runCount++;
Round r = this.NewRound(runCount.ToString(), "Import image");
CheckPoint pCreate = new CheckPoint("Create Patient", "Test create");
r.CheckPoints.Add(pCreate);
PatientService ps = new PatientService();
ImportService ims = new ImportService();
PresentationStateService pss = new PresentationStateService();
XMLParameter pa = new XMLParameter("patient");
XMLParameter ia = new XMLParameter("import");
XMLParameter ObjFilter = new XMLParameter("filter");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "create")
{
pa.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
isCreatePatient = true;
}
if (ids.InputParameters.GetParameter(i).Step == "import")
{
ia.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
}
if (ids.InputParameters.GetParameter(i).Step == "delete")
{
isDeletePatient = true;
}
}
if (isCreatePatient)
{
XMLResult result = ps.createPatient(pa);
if (!result.IsErrorOccured)
{
patientUID = result.SingleResult;
pCreate.Outputs.AddParameter("create", "Create patient UID", patientUID);
pCreate.Result = TestResult.Pass;
}
}
CheckPoint pImport = new CheckPoint("Import Image", "Test import");
r.CheckPoints.Add(pImport);
string filePath = string.Empty;
string archivePath = string.Empty;
bool move = false;
for (int c = 0; c < ia.Length; c++)
{
if (ia.GetParameterName(c) == "path")
filePath = ia.GetParameterValue(c);
if (ia.GetParameterName(c) == "archivePath")
archivePath = ia.GetParameterValue(c);
if (ia.GetParameterName(c) == "move")
{
if (ia.GetParameterValue(c) == "true")
move = true;
}
}
XMLResult rslImport = ims.importObject(patientUID, "", filePath, archivePath, move, "false");
if (rslImport.IsErrorOccured)
{
pImport.Result = TestResult.Fail;
pImport.Outputs.AddParameter("import", "Import image fail", rslImport.Message);
pImport.Outputs.AddParameter("import", "Import image error code", rslImport.Code.ToString());
}
else
{
pImport.Result = TestResult.Pass;
pImport.Outputs.AddParameter("import", "Import image OK", rslImport.Message);
ObjFilter.AddParameter("patient_internal_id", patientUID);
ObjFilter.AddParameter("type", "presentationstate");
ObjFilter.AddParameter("current", "true");
XMLResult listObjcetRsl = ps.listObjects(ObjFilter);
CheckPoint pListObject = new CheckPoint("List Image", "Test list object");
r.CheckPoints.Add(pListObject);
if (listObjcetRsl.IsErrorOccured)
{
pListObject.Result = TestResult.Fail;
pListObject.Outputs.AddParameter("Erron in List Object", "List Object", "List Patient Presentation State Error");
}
else
{
pListObject.Outputs.AddParameter("List Object return content", "List Object", listObjcetRsl.ResultContent);
if (listObjcetRsl.ArrayResult.Length == 3)
{
bool isMatchXML = true;
for (int index = 0; index < listObjcetRsl.ArrayResult.Parameters.Count; index++)
{
XMLResult getPSRsl = pss.getPresentationState(listObjcetRsl.ArrayResult.Parameters[index].ParameterValue);
if (getPSRsl.ArrayResult.Parameters.Count != 4)
{
isMatchXML = false;
pListObject.Outputs.AddParameter("Get PS return content", "Get PS Description", getPSRsl.ResultContent);
break;
}
}
if (isMatchXML)
{
pListObject.Result = TestResult.Pass;
}
else
{
pListObject.Result = TestResult.Fail;
pListObject.Outputs.AddParameter("Get PS description error", "Get PS Description", "Not return all xml and image id");
}
}
else
{
pListObject.Result = TestResult.Fail;
pListObject.Outputs.AddParameter("The PS count not match", "Get All PS Description", "Not three PS be retrieve.");
}
}
}
if (isDeletePatient)
{
XMLResult rslDelete = ps.deletePatient(patientUID);
if (!rslDelete.IsErrorOccured)
{
pImport.Outputs.AddParameter("Delete created patient", "Delete Patient", rslDelete.ResultContent);
}
}
SaveRound(r);
}
Output();
}