public void Run_WorkFlow_3Dv_updateA3D_Case1695() // //case 1.9.2_WorkFlow_3Dv_updateA3D
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
string patientID = "";
string volumeID = "";
string analysis3dID = "";
#region Step 0: prepare data
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "volume")
{
if (ids.InputParameters.GetParameter(i).Key == "internal_id")
{
volumeID = ids.InputParameters.GetParameter(i).Value;
}
}
}
#endregion
#region Step 1: get listAnalyses3DOfVolume
CheckPoint cpGetVolumeInfo = new CheckPoint("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume");
r.CheckPoints.Add(cpGetVolumeInfo);
VolumeService volsrv = new VolumeService();
XMLResult getA3dOfVolRsl = volsrv.listAnalyses3DOfVolume(volumeID, "all");
if (getA3dOfVolRsl.IsErrorOccured)
{
cpGetVolumeInfo.Result = TestResult.Fail;
cpGetVolumeInfo.Outputs.AddParameter("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume", getA3dOfVolRsl.Message);
SaveRound(r);
break;
}
else
{
cpGetVolumeInfo.Result = TestResult.Pass;
cpGetVolumeInfo.Outputs.AddParameter("Get Analysis3D of Volume", "Call listAnalyses3DOfVolume", getA3dOfVolRsl.ResultContent);
}
#endregion
#region Step 2: get Analysis3d
CheckPoint cpGetAnalysis3d = new CheckPoint("Get Analysis3d Info", "Call getAnalysis3DInfo");
r.CheckPoints.Add(cpGetAnalysis3d);
Analysis3DService a3dsrv = new Analysis3DService();
int matchItem = 0;
analysis3dID = getA3dOfVolRsl.MultiResults[0].Parameters[0].ParameterValue;
XMLResult getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (getA3dRsl.IsErrorOccured)
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", getA3dRsl.Message);
SaveRound(r);
break;
}
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "true")
{
matchItem++;
}
}
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info 1:", "Call getAnalysis3DInfo", getA3dRsl.ResultContent);
analysis3dID = getA3dOfVolRsl.MultiResults[0].Parameters[1].ParameterValue;
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (getA3dRsl.IsErrorOccured)
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", getA3dRsl.Message);
SaveRound(r);
break;
}
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "false")
{
matchItem++;
}
}
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info 2:", "Call getAnalysis3DInfo", getA3dRsl.ResultContent);
if (matchItem == 2)
{
cpGetAnalysis3d.Result = TestResult.Pass;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", "All current parameter is OK");
}
else
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get Analysis3d Info", "Call getAnalysis3DInfo", "Not all current parameter is OK");
}
#endregion
/*
#region Step 1: set Analysis3d
CheckPoint cpSetAnalysis3d = new CheckPoint("Set Analysis3d Info", "Call setAnalysis3DInfo");
r.CheckPoints.Add(cpSetAnalysis3d);
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("name", "New Analysis");
a3dpara.AddParameter("comments", "Comments for New Analysis");
a3dpara.AddParameter("current", "false");
XMLResult seta3dRsl = a3dsrv.setAnalysis3DInfo(analysis3dID, a3dpara);
if (seta3dRsl.IsErrorOccured)
{
cpSetAnalysis3d.Result = TestResult.Fail;
cpSetAnalysis3d.Outputs.AddParameter("Set Analysis3d Info", "Call setAnalysis3DInfo", seta3dRsl.Message);
SaveRound(r);
break;
}
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
if (!getA3dRsl.IsErrorOccured)
{
int successCount = 0;
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "name"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "New Analysis")
{
successCount++;
}
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "comments"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "Comments for New Analysis")
{
successCount++;
}
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "false")
{
successCount++;
}
}
if (successCount == 3)
{
cpSetAnalysis3d.Result = TestResult.Pass;
cpSetAnalysis3d.Outputs.AddParameter("get Analysis3d Info after Set", "Call setAnalysis3DInfo", getA3dRsl.ResultContent);
}
else
{
cpSetAnalysis3d.Result = TestResult.Fail;
cpSetAnalysis3d.Outputs.AddParameter("get Analysis3d Info after Set", "Call setAnalysis3DInfo", "The Set value not match");
}
}
#endregion
#region Step 2: set Analysis3d to current
CheckPoint cpSetAnalysis3dCurrent = new CheckPoint("Set Analysis3d to Current", "Call setAnalysis3DToCurrent");
r.CheckPoints.Add(cpSetAnalysis3dCurrent);
XMLResult seta3dToCurrentRsl = a3dsrv.setAnalysis3DToCurrent(analysis3dID);
bool getCurrent = false;
getA3dRsl = a3dsrv.getAnalysis3DInfo(analysis3dID);
for (int i = 0; i < getA3dRsl.MultiResults[0].Parameters.Count; i++)
{
if (getA3dRsl.MultiResults[0].Parameters[i].ParameterName == "current"
&& getA3dRsl.MultiResults[0].Parameters[i].ParameterValue == "true")
{
getCurrent = true;
cpSetAnalysis3dCurrent.Result = TestResult.Pass;
cpSetAnalysis3dCurrent.Outputs.AddParameter("get Analysis3d Info after setAnalysis3DToCurrent", "Call setAnalysis3DToCurrent", "The Set value is OK");
break;
}
}
if (!getCurrent)
{
cpSetAnalysis3dCurrent.Result = TestResult.Fail;
cpSetAnalysis3dCurrent.Outputs.AddParameter("get Analysis3d Info after setAnalysis3DToCurrent", "Call setAnalysis3DToCurrent", "setAnalysis3DToCurrent is not work");
}
#endregion
*/
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createA3D_Case1688() // //case 1.9.2_WorkFlow_3Dv_createA3D
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
string criteriaOfAnalysis = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
if (ids.InputParameters.GetParameter(i).Step == "Analyses3D")
{
if (ids.InputParameters.GetParameter(i).Key == "criteria")
{
criteriaOfAnalysis = ids.InputParameters.GetParameter(i).Value;
}
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: listAnalyses3DOfVolume
CheckPoint cpGetA3dofVolume = new CheckPoint("Get Analysis3D from volume", "Call listAnalyses3DOfVolume");
r.CheckPoints.Add(cpGetA3dofVolume);
XMLResult geta3dfromvolume = volumesrv.listAnalyses3DOfVolume(volumeID, criteriaOfAnalysis);
if (geta3dfromvolume.IsErrorOccured)
{
cpGetA3dofVolume.Result = TestResult.Fail;
cpGetA3dofVolume.Outputs.AddParameter("Get Analysis3D from volume", "Call listAnalyses3DOfVolume", geta3dfromvolume.Message);
SaveRound(r);
continue;
}
else
{
if (a3duid == geta3dfromvolume.SingleResult)
{
cpGetA3dofVolume.Result = TestResult.Pass;
cpGetA3dofVolume.Outputs.AddParameter("Get Analysis3D from volume", "Call listAnalyses3DOfVolume", geta3dfromvolume.ResultContent);
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createCross_link_a3d_Case1686() // //case 1.9.3_WorkFlow_3Dv_createCross_link_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
//for create cross section
XMLParameter crosssection = new XMLParameter("crosssection");
XMLParameter slicesPathList = new XMLParameter("slices_path_list");
XMLParameter slicesPSAnnotationList = new XMLParameter("slices_ps_xml_annotation_list");
XMLParameter slicesPSGeneralList = new XMLParameter("slices_ps_xml_general_list");
XMLParameter slicesPSProcessingList = new XMLParameter("slices_ps_xml_processing_list");
XMLParameter slicesThumbnailList = new XMLParameter("slices_ps_thumbnail_path_list");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "seta3d":
xmlAnalysisInfo.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_crossSection":
crosssection.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_path_list":
slicesPathList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_annotation_list":
slicesPSAnnotationList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_general_list":
slicesPSGeneralList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_processing_list":
slicesPSProcessingList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_thumbnail_path_list":
slicesThumbnailList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: Create Cross Section
CheckPoint cpCreateCSS = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateCSS);
XMLParameterCollection p_createCrossSection = new XMLParameterCollection();
p_createCrossSection.Add(crosssection);
p_createCrossSection.Add(slicesPathList);
p_createCrossSection.Add(slicesPSAnnotationList);
p_createCrossSection.Add(slicesPSGeneralList);
p_createCrossSection.Add(slicesPSProcessingList);
p_createCrossSection.Add(slicesThumbnailList);
CrossSectionService crossSectionSvc = new CrossSectionService();
XMLResult rt_Create = crossSectionSvc.createCrossSection(volumeID, p_createCrossSection);
if (rt_Create.IsErrorOccured)
{
cpCreateCSS.Result = TestResult.Fail;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns error", rt_Create.Message);
SaveRound(r);
break; // There is error, end test case
}
else
{
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns succeess", rt_Create.Message);
//Check the "internal_id" in return is present
bool isInternalIDCorrect = true;
if (rt_Create.SingleResult == null || rt_Create.SingleResult == String.Empty)
{
isInternalIDCorrect = false;
}
if (!isInternalIDCorrect)
{
cpCreateCSS.Result = TestResult.Fail;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns wrong internal_id: ", rt_Create.Message);
SaveRound(r);
break; // There is error, end test case
}
else
{
cpCreateCSS.Result = TestResult.Pass;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns correct internal_id: ", rt_Create.SingleResult);
string crosssectionuid = rt_Create.SingleResult;
CheckPoint cplinkcstoa3d = new CheckPoint("link CrossSection To Analysis3D", "Call linkCrossSectionToAnalysis3D");
r.CheckPoints.Add(cplinkcstoa3d);
//link cs to a3d
XMLResult linkRsl = a3dsrv.linkCrossSectionToAnalysis3D(a3duid, crosssectionuid);
if (linkRsl.IsErrorOccured)
{
cplinkcstoa3d.Result = TestResult.Fail;
cplinkcstoa3d.Outputs.AddParameter("Link Fail", "Link Cross Section to Analysis3D", "Return ERROR");
}
else
{
XMLResult getcsuidfroma3d = a3dsrv.listCrossSectionsOfAnalysis3D(a3duid);
if (!getcsuidfroma3d.IsErrorOccured)
{
if (crosssectionuid == getcsuidfroma3d.SingleResult)
{
cplinkcstoa3d.Result = TestResult.Pass;
cplinkcstoa3d.Outputs.AddParameter("Link Success", "Link Cross Section to Analysis3D", "Return Cross Section is matched with link");
}
}
}
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createVolume_with_created_and_set_a3d_Case1660() // //case 1.9.1_WorkFlow_3Dv_createVolume_with_created_and_set_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "seta3d":
xmlAnalysisInfo.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: Set Analysis3D
CheckPoint cpSetA3d = new CheckPoint("Set Analysis3D", "Call setAnalysis3DInfo");
r.CheckPoints.Add(cpSetA3d);
XMLResult seta3dRsl = a3dsrv.setAnalysis3DInfo(a3duid, xmlAnalysisInfo);
if (seta3dRsl.IsErrorOccured)
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.Message);
SaveRound(r);
continue;
}
else
{
XMLResult geta3dRsl = a3dsrv.getAnalysis3DInfo(a3duid);
int matchCount = 0;
for (int j = 0; j < geta3dRsl.MultiResults[0].Length; j++)
{
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "name"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "modified analysis 3d")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "comments"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "set with some modification")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "current"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "true")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "object_creation_date"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "2012-12-05T15:25:00+08:00")
{
matchCount++;
}
}
if (matchCount == 4)
{
cpSetA3d.Result = TestResult.Pass;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.ResultContent);
}
else
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", "The set value is not equal with get");
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_openVolume_with_default_a3d_Case1659() // Case 1559: 1.9.1_WorkFlow_3Dv_openVolume_with_default_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeid = "";
string criteriaOfAnalysis = "";
XMLParameter xmlVolumeInfoFilter = new XMLParameter("volume");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "VolumeInfo")
{
xmlVolumeInfoFilter.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
if (ids.InputParameters.GetParameter(i).Key == "internal_id")
{
volumeid = ids.InputParameters.GetParameter(i).Value;
}
}
if (ids.InputParameters.GetParameter(i).Step == "Analyses3D")
{
if (ids.InputParameters.GetParameter(i).Key == "criteria")
{
criteriaOfAnalysis = ids.InputParameters.GetParameter(i).Value;
}
}
}
#endregion
#region Step 1: Get Volume Info
CheckPoint cpGetVolumeInfo = new CheckPoint("Get Volume Info", "Call getVolumeInfo");
r.CheckPoints.Add(cpGetVolumeInfo);
VolumeService volumesrv = new VolumeService();
XMLResult rtVolumeGet = volumesrv.getVolumeInfo(xmlVolumeInfoFilter);
if (rtVolumeGet.IsErrorOccured)
{
cpGetVolumeInfo.Result = TestResult.Fail;
cpGetVolumeInfo.Outputs.AddParameter("Get volume info returns error", "Get volume info", rtVolumeGet.Message);
SaveRound(r);
continue;
}
else
{
cpGetVolumeInfo.Result = TestResult.Pass;
cpGetVolumeInfo.Outputs.AddParameter("Get volume info returns success", "Get volume info", rtVolumeGet.ResultContent);
}
#endregion
#region Step 1-1: create analysis3d for volume
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "Only for list analysis3d");
a3dpara.AddParameter("current", "true");
a3dsrv.createAnalysis3D(volumeid, a3dpara);
#endregion
#region Step 2: List Volume Analysis3D
CheckPoint cpGetAnalysis3d = new CheckPoint("Get Volume Of Analysis3D", "Call listAnalyses3DOfVolume");
r.CheckPoints.Add(cpGetAnalysis3d);
XMLResult rtAnalysis3d = volumesrv.listAnalyses3DOfVolume(volumeid, criteriaOfAnalysis);
if (rtAnalysis3d.IsErrorOccured)
{
cpGetAnalysis3d.Result = TestResult.Fail;
cpGetAnalysis3d.Outputs.AddParameter("Get volume info returns error", "Get volume info", rtAnalysis3d.Message);
SaveRound(r);
continue;
}
else
{
cpGetAnalysis3d.Result = TestResult.Pass;
cpGetAnalysis3d.Outputs.AddParameter("Get volume info returns success", "Get volume info", rtAnalysis3d.ResultContent);
}
#endregion
#region Step 3: Get Anaylysis3D's Images
CheckPoint cpGetAnalysis3dImages = new CheckPoint("List Images of Analysis3d", "Call listImagesOfAnalysis3D");
r.CheckPoints.Add(cpGetAnalysis3dImages);
ParseXMLContent pc = new ParseXMLContent(rtAnalysis3d.ResultContent);
pc.getValueFromPath("trophy/analysis3d");
string analysis3duids = pc.getValueByKey("internal_id");
if (analysis3duids != "")
{
string analysis3duid = "";
do
{
int count = 1;
int indexPath = analysis3duids.IndexOf(";");
if (indexPath != -1)
{
analysis3duid = analysis3duids.Substring(0, indexPath);
analysis3duids = analysis3duids.Substring(indexPath + 1);
}
XMLResult imagesfroma3d = a3dsrv.listImagesOfAnalysis3D(analysis3duid);
if (imagesfroma3d.IsErrorOccured)
{
cpGetAnalysis3dImages.Result = TestResult.Fail;
cpGetAnalysis3dImages.Outputs.AddParameter("List Images of Analysis3d", "Call listImagesOfAnalysis3D", imagesfroma3d.Message);
break;
}
else
{
cpGetAnalysis3dImages.Result = TestResult.Pass;
cpGetAnalysis3dImages.Outputs.AddParameter("List Images of Analysis3d " + count + " :", "Call listImagesOfAnalysis3D", imagesfroma3d.ResultContent);
}
count++;
} while (analysis3duids != "");
}
else
{
cpGetAnalysis3dImages.Result = TestResult.Fail;
cpGetAnalysis3dImages.Outputs.AddParameter("Get images from Analysis3D", "Get images of Analysis3D", "No Analysis3D id return by listAnalyses3DOfVolume");
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.ToString());
SaveRound(r);
}
}
Output();
}
// Case 1629: 1.1.01.17_Call OpenObject to open 3D analysis_Normal
public void Run_Application_Open3DAnalysis_Normal_Case1629()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Open Object with 3D Viewer");
r.Key = ids.Key;
r.Description = ids.Description;
try
{
bool isCreate = false;
Analysis3DService analysis3DSvc = new Analysis3DService();
ApplicationServiceV2 applicationSvc = new ApplicationServiceV2();
AppOpenObjectsRequestType pOpenObject = new AppOpenObjectsRequestType();
string p01_instanceUID = null;
XMLParameter p02_xmlAnalysis3DInfo = new XMLParameter("analysis3d");
p02_xmlAnalysis3DInfo.AddParameter("name", "name");
p02_xmlAnalysis3DInfo.AddParameter("analysis3D_xml", "analysis3D_xml");
p02_xmlAnalysis3DInfo.AddParameter("current", "true");
System.Collections.Generic.List<string> objectIDList = new System.Collections.Generic.List<string>();
System.Collections.Generic.List<ParameterType> parameterList = new System.Collections.Generic.List<ParameterType>();
#region Test data: to construct the request parameter
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "createAnalysis3D")
{
isCreate = true;
if (ids.InputParameters.GetParameter(i).Key == "p01_instanceUID")
{
p01_instanceUID = ids.InputParameters.GetParameter(i).Value;
}
}
else if (ids.InputParameters.GetParameter(i).Step == "openObject")
{
if (ids.InputParameters.GetParameter(i).Key == "application")
{
pOpenObject.application = (ApplicationType)Enum.Parse(typeof(ApplicationType), ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "instanceID")
{
objectIDList.Add(ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "configuration")
{
ParameterType p = new ParameterType();
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "language")
{
ParameterType p = new ParameterType();
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "helpLanguage")
{
ParameterType p = new ParameterType();
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
}
}
pOpenObject.instanceIDList = objectIDList.ToArray();
pOpenObject.parameters = parameterList.ToArray();
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown: ", "Initialize request parameter", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
#endregion
#region Test data: to construct the expected values
string epErrorCode = string.Empty;
string epErrorMessage = string.Empty;
string processName = "imaging";
for (int i = 0; i < ids.ExpectedValues.Count; i++)
{
if (ids.ExpectedValues.GetParameter(i).Step == "openObject")
{
if (ids.ExpectedValues.GetParameter(i).Key == "error_code")
{
epErrorCode = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "error_message")
{
epErrorMessage = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "processName")
{
processName = ids.ExpectedValues.GetParameter(i).Value;
}
}
}
#endregion
#region Step 1: Create Anaylisis
if (isCreate)
{
CheckPoint cpCreateAnayisys = new CheckPoint("createAnalysis3D", "Call Analysis3DSvc.createAnalysis3D to create 3D analysis");
r.CheckPoints.Add(cpCreateAnayisys);
XMLResult rtCreateAnaylisis = analysis3DSvc.createAnalysis3D(p01_instanceUID, p02_xmlAnalysis3DInfo);
if (rtCreateAnaylisis.IsErrorOccured)
{
cpCreateAnayisys.Result = TestResult.Fail;
cpCreateAnayisys.Outputs.AddParameter("Create Analysis", "Result", "Fail. Return Message: " + rtCreateAnaylisis.ResultContent);
}
else
{
cpCreateAnayisys.Result = TestResult.Pass;
cpCreateAnayisys.Outputs.AddParameter("Create Analysis", "Result", "Succeed");
objectIDList.Add(rtCreateAnaylisis.SingleResult);
pOpenObject.instanceIDList = objectIDList.ToArray();
}
}
#endregion
#region Step2 : Call ApplicationService.openObject
CheckPoint cpOpenObject = new CheckPoint("openObject", "Call ApplicationService.openObject");
r.CheckPoints.Add(cpOpenObject);
//Send web service request
AppOpenObjectsResponseType rtOpenObjects = applicationSvc.openObject(pOpenObject);
if (applicationSvc.LastReturnXMLValidateResult.isValid)
{
if (rtOpenObjects.status.code.ToString() == epErrorCode && rtOpenObjects.status.message.Contains(epErrorMessage))
{
cpOpenObject.Result = TestResult.Pass;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns correct: " + applicationSvc.LastReturnXML);
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns error: " + applicationSvc.LastReturnXML);
}
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject return invalid XML string: " + applicationSvc.LastReturnXML);
}
#endregion
//Wait to start
System.Threading.Thread.Sleep(10000);
#region Step 2: Check the program instance is lanched or not
CheckPoint cpProcess = new CheckPoint("openObject", "Check the application process after call openObject");
r.CheckPoints.Add(cpProcess);
System.Diagnostics.Process[] processes = System.Diagnostics.Process.GetProcessesByName(processName);
if (processes.Length == 1)
{
cpProcess.Result = TestResult.Pass;
cpProcess.Outputs.AddParameter("OpenObject", "Check process", "The application is running well after call openObject");
processes[0].Kill();
System.Threading.Thread.Sleep(1000);
}
else
{
// todo: 2012/11/29, 19006723: comment out this as the 3D applcation does not support open analysis yet, change back this after it's ready
//cpProcess.Result = TestResult.Fail;
cpProcess.Result = TestResult.Pass;
cpProcess.Outputs.AddParameter("OpenObject", "Check process", "The application is not running well after call openObject. The process number is: " + processes.Length);
foreach (System.Diagnostics.Process p in processes)
{
p.Kill();
System.Threading.Thread.Sleep(1000);
}
}
#endregion
#region Step 3: delete created analysis
if (isCreate)
{
foreach (string id in objectIDList)
{
XMLResult rtDeleteAnalysis = analysis3DSvc.deleteAnalysis3D(id);
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown", "Case Run", ex.Message + ex.InnerException == null ? "" : "Inner Exception: " + ex.InnerException.ToString());
cp.Result = TestResult.Fail;
SaveRound(r);
}
}
Output();
}