/// <summary>
/// WireProfile constructor (default - builds from self-contained data)
/// </summary>
public WireProfile(Viewer viewer) // Nasty: void return type is not allowed. (See MSDN for compiler error CS0542.)
: base(viewer, 0) //call the dummy base constructor so that no data is pre-populated
{
LODMethod = LODMethods.ComponentAdditive;
LODWire lod; // Local LOD instance
LODItemWire lodItem; // Local LODItem instance
Polyline pl; // Local polyline instance
Polyline vertical;
expectedSegmentLength = 40; //segment of wire is expected to be 40 meters
lod = new LODWire(800.0f); // Create LOD for railsides with specified CutoffRadius
lodItem = new LODItemWire("Wire");
var normalvalue = 0.707f;
if (File.Exists(viewer.Simulator.RoutePath + "\\Textures\\overheadwire.ace"))
{
lodItem.TexName = "overheadwire.ace";
}
else
{
Trace.TraceInformation("Ignored missing overheadwire.ace, using default. You can copy the overheadwire.ace from OR\'s AddOns folder to {0}\\Textures", viewer.Simulator.RoutePath);
lodItem.TexName = "..\\..\\..\\global\\textures\\dieselsmoke.ace";
}
lodItem.ShaderName = "TexDiff";
lodItem.LightModelName = "OptSpecular0";
lodItem.AlphaTestMode = 0;
lodItem.TexAddrModeName = "Wrap";
lodItem.ESD_Alternative_Texture = 0;
lodItem.MipMapLevelOfDetailBias = 0;
LODItem.LoadMaterial(viewer, lodItem);
float topHeight = (float)viewer.Simulator.TRK.Tr_RouteFile.OverheadWireHeight;
float u1 = 0.25f, v1 = 0.25f;
pl = new Polyline(this, "TopWire", 5);
pl.DeltaTexCoord = new Vector2(0.00f, 0.00f);
pl.Vertices.Add(new Vertex(-0.01f, topHeight + 0.02f, 0.0f, -normalvalue, normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(0.01f, topHeight + 0.02f, 0.0f, normalvalue, normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(0.01f, topHeight, 0.0f, normalvalue, -normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(-0.01f, topHeight, 0.0f, -normalvalue, -normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(-0.01f, topHeight + 0.02f, 0.0f, -normalvalue, normalvalue, 0f, u1, v1));
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
if (viewer.Settings.DoubleWire)
{
pl = new Polyline(this, "TopWire1", 5);
pl.DeltaTexCoord = new Vector2(0.00f, 0.00f);
topHeight += 1.0f;
pl.Vertices.Add(new Vertex(-0.01f, topHeight + 0.02f, 0.0f, -normalvalue, normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(0.01f, topHeight + 0.02f, 0.0f, normalvalue, normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(0.01f, topHeight, 0.0f, normalvalue, -normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(-0.01f, topHeight, 0.0f, -normalvalue, -normalvalue, 0f, u1, v1));
pl.Vertices.Add(new Vertex(-0.01f, topHeight + 0.02f, 0.0f, -normalvalue, normalvalue, 0f, u1, v1));
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
vertical = new Polyline(this, "TopWireVertical", 5);
vertical.DeltaTexCoord = new Vector2(0.00f, 0.00f);
vertical.Vertices.Add(new Vertex(-0.008f, topHeight, 0.008f, -normalvalue, 0f, normalvalue, u1, v1));
vertical.Vertices.Add(new Vertex(-.008f, topHeight, -.008f, normalvalue, 0f, normalvalue, u1, v1));
vertical.Vertices.Add(new Vertex(.008f, topHeight, -.008f, normalvalue, 0f, -normalvalue, u1, v1));
vertical.Vertices.Add(new Vertex(.008f, topHeight, .008f, -normalvalue, 0f, -normalvalue, u1, v1));
vertical.Vertices.Add(new Vertex(-.008f, topHeight, .008f, -normalvalue, 0f, normalvalue, u1, v1));
lodItem.VerticalPolylines = new ArrayList();
lodItem.VerticalPolylines.Add(vertical);
lodItem.VerticalAccumulate(vertical.Vertices.Count);
}
lod.LODItems.Add(lodItem); // Append to LODItems array
base.LODs.Add(lod); // Append this lod to LODs array
}
/// <summary>
/// Builds a Wire LOD to WireProfile specifications as one vertex buffer and one index buffer.
/// The order in which the buffers are built reflects the nesting in the TrProfile. The nesting order is:
/// (Polylines (Vertices)). All vertices and indices are built contiguously for an LOD.
/// </summary>
/// <param name="viewer">Viewer.</param>
/// <param name="lodIndex">Index of LOD mesh to be generated from profile.</param>
/// <param name="lodItemIndex">Index of LOD mesh to be generated from profile.</param>
public ShapePrimitive BuildPrimitive(Viewer viewer, int lodIndex, int lodItemIndex)
{
// Call for track section to initialize itself
if (DTrackData.IsCurved == 0)
{
LinearGen();
}
else
{
CircArcGen();
}
// Count vertices and indices
LODWire lod = (LODWire)TrProfile.LODs[lodIndex];
LODItemWire lodItem = (LODItemWire)lod.LODItems[lodItemIndex];
NumVertices = (int)(lodItem.NumVertices * (NumSections + 1) + 2 * lodItem.VerticalNumVertices * NumSections);
NumIndices = (short)(lodItem.NumSegments * NumSections * 6 + lodItem.VerticalNumSegments * NumSections * 6);
// (Cells x 2 triangles/cell x 3 indices/triangle)
// Allocate memory for vertices and indices
VertexList = new VertexPositionNormalTexture[NumVertices]; // numVertices is now aggregate
TriangleListIndices = new short[NumIndices]; // as is NumIndices
// Build the mesh for lod
VertexIndex = 0;
IndexIndex = 0;
// Initial load of baseline cross section polylines for this LOD only:
foreach (Polyline pl in lodItem.Polylines)
{
foreach (Vertex v in pl.Vertices)
{
VertexList[VertexIndex].Position = v.Position;
VertexList[VertexIndex].Normal = v.Normal;
VertexList[VertexIndex].TextureCoordinate = v.TexCoord;
VertexIndex++;
}
}
// Initial load of base cross section complete
// Now generate and load subsequent cross sections
OldRadius = -center;
uint stride = VertexIndex;
for (uint i = 0; i < NumSections; i++)
{
foreach (Polyline pl in lodItem.Polylines)
{
uint plv = 0; // Polyline vertex index
foreach (Vertex v in pl.Vertices)
{
if (DTrackData.IsCurved == 0)
{
LinearGen(stride, pl); // Generation call
}
else
{
CircArcGen(stride, pl);
}
if (plv > 0)
{
// Sense for triangles is clockwise
// First triangle:
TriangleListIndices[IndexIndex++] = (short)VertexIndex;
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1 - stride);
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1);
// Second triangle:
TriangleListIndices[IndexIndex++] = (short)VertexIndex;
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - stride);
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1 - stride);
}
VertexIndex++;
plv++;
}
}
OldRadius = radius; // Get ready for next segment
}
if (lodItem.VerticalPolylines != null && lodItem.VerticalPolylines.Count > 0)
{
// Now generate and load subsequent cross sections
OldRadius = -center;
float coveredLength = SegmentLength;
for (uint i = 0; i < NumSections; i++)
{
stride = 0;
radius = Vector3.Transform(OldRadius, sectionRotation);
Vector3 p;
// Initial load of baseline cross section polylines for this LOD only:
if (i == 0)
{
foreach (Polyline pl in lodItem.VerticalPolylines)
{
foreach (Vertex v in pl.Vertices)
{
VertexList[VertexIndex].Position = v.Position;
VertexList[VertexIndex].Normal = v.Normal;
VertexList[VertexIndex].TextureCoordinate = v.TexCoord;
VertexIndex++;
stride++;
}
}
}
else
{
foreach (Polyline pl in lodItem.VerticalPolylines)
{
foreach (Vertex v in pl.Vertices)
{
if (DTrackData.IsCurved != 0)
{
OldV = v.Position - center - OldRadius;
// Rotate the point about local origin and reposition it (including elevation change)
p = DDY + center + radius + v.Position;// +Vector3.Transform(OldV, sectionRotation);
VertexList[VertexIndex].Position = new Vector3(p.X, p.Y, p.Z);
}
else
{
VertexList[VertexIndex].Position = v.Position + new Vector3(0, 0, -coveredLength);
}
VertexList[VertexIndex].Normal = v.Normal;
VertexList[VertexIndex].TextureCoordinate = v.TexCoord;
VertexIndex++;
stride++;
}
}
}
foreach (Polyline pl in lodItem.VerticalPolylines)
{
uint plv = 0; // Polyline vertex index
foreach (Vertex v in pl.Vertices)
{
LinearVerticalGen(stride, pl); // Generation call
if (plv > 0)
{
// Sense for triangles is clockwise
// First triangle:
TriangleListIndices[IndexIndex++] = (short)VertexIndex;
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1 - stride);
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1);
// Second triangle:
TriangleListIndices[IndexIndex++] = (short)VertexIndex;
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - stride);
TriangleListIndices[IndexIndex++] = (short)(VertexIndex - 1 - stride);
}
VertexIndex++;
plv++;
}
}
if (i != 0)
{
OldRadius = radius; // Get ready for next segment
coveredLength += SegmentLength;
}
}
}
// Create and populate a new ShapePrimitive
var indexBuffer = new IndexBuffer(viewer.GraphicsDevice, typeof(short), NumIndices, BufferUsage.WriteOnly);
indexBuffer.SetData(TriangleListIndices);
return(new ShapePrimitive(lodItem.LODMaterial, new SharedShape.VertexBufferSet(VertexList, viewer.GraphicsDevice), indexBuffer, 0, NumVertices, NumIndices / 3, new[] { -1 }, 0));
}
/// <summary>
/// WireProfile constructor (default - builds from self-contained data)
/// </summary>
public WireProfile(Viewer viewer) // Nasty: void return type is not allowed. (See MSDN for compiler error CS0542.)
: base(viewer, 0) //call the dummy base constructor so that no data is pre-populated
{
LODMethod = LODMethods.ComponentAdditive;
LODWire lod; // Local LOD instance
LODItemWire lodItem; // Local LODItem instance
Polyline pl; // Local polyline instance
Polyline vertical;
expectedSegmentLength = 40; //segment of wire is expected to be 40 meters
lod = new LODWire(800.0f); // Create LOD for railsides with specified CutoffRadius
lodItem = new LODItemWire("Wire");
if (File.Exists(viewer.Simulator.RoutePath + "\\Textures\\overheadwire.ace"))
{
lodItem.TexName = "overheadwire.ace";
}
else if (File.Exists(viewer.Simulator.BasePath + "\\global\\textures\\overheadwire.ace"))
{
lodItem.TexName = "..\\..\\..\\global\\textures\\overheadwire.ace";
}
else
{
Trace.TraceInformation("Ignored missing overheadwire.ace, using default. You can copy the overheadwire.ace from OR\'s AddOns folder to {0}\\Textures", viewer.Simulator.RoutePath);
lodItem.TexName = "..\\..\\..\\global\\textures\\dieselsmoke.ace";
}
lodItem.ShaderName = "TexDiff";
lodItem.LightModelName = "DarkShade";
lodItem.AlphaTestMode = 0;
lodItem.TexAddrModeName = "Wrap";
lodItem.ESD_Alternative_Texture = 0;
lodItem.MipMapLevelOfDetailBias = 0;
LODItem.LoadMaterial(viewer, lodItem);
bool drawTriphaseWire = (viewer.Simulator.TRK.Tr_RouteFile.TriphaseEnabled == "Off" ? false :
viewer.Simulator.TRK.Tr_RouteFile.TriphaseEnabled == "On");
bool drawDoubleWire = (viewer.Simulator.TRK.Tr_RouteFile.DoubleWireEnabled == "Off" ? false :
viewer.Simulator.TRK.Tr_RouteFile.DoubleWireEnabled == "On" || viewer.Settings.DoubleWire);
float topHeight = (float)viewer.Simulator.TRK.Tr_RouteFile.OverheadWireHeight;
float topWireOffset = (viewer.Simulator.TRK.Tr_RouteFile.DoubleWireHeight > 0 ?
viewer.Simulator.TRK.Tr_RouteFile.DoubleWireHeight : 1.0f);
float dist = (viewer.Simulator.TRK.Tr_RouteFile.TriphaseWidth > 0 ?
viewer.Simulator.TRK.Tr_RouteFile.TriphaseWidth : 1.0f);
if (drawTriphaseWire)
{
pl = SingleWireProfile("TopWireLeft", topHeight, -dist / 2);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
pl = SingleWireProfile("TopWireRight", topHeight, dist / 2);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
}
else
{
pl = SingleWireProfile("TopWire", topHeight);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
}
if (drawDoubleWire)
{
topHeight += topWireOffset;
if (drawTriphaseWire)
{
pl = SingleWireProfile("TopWire1Left", topHeight, -dist / 2);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
pl = SingleWireProfile("TopWire1Right", topHeight, dist / 2);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
vertical = VerticalWireProfile("TopWireVerticalLeft", topHeight, -dist / 2);
lodItem.VerticalPolylines = new ArrayList();
lodItem.VerticalPolylines.Add(vertical);
lodItem.VerticalAccumulate(vertical.Vertices.Count);
vertical = VerticalWireProfile("TopWireVerticalRight", topHeight, dist / 2);
lodItem.VerticalPolylines.Add(vertical);
lodItem.VerticalAccumulate(vertical.Vertices.Count);
}
else
{
pl = SingleWireProfile("TopWire1", topHeight);
lodItem.Polylines.Add(pl);
lodItem.Accum(pl.Vertices.Count);
vertical = VerticalWireProfile("TopWireVertical", topHeight);
lodItem.VerticalPolylines = new ArrayList();
lodItem.VerticalPolylines.Add(vertical);
lodItem.VerticalAccumulate(vertical.Vertices.Count);
}
}
lod.LODItems.Add(lodItem); // Append to LODItems array
base.LODs.Add(lod); // Append this lod to LODs array
}
