private void butOK_Click(object sender, System.EventArgs e)
{
RepeatCharge[] chargeList = RepeatCharges.Refresh(0);
int countAdded = 0;
DateTime possibleDate;
Procedure proc;
for (int i = 0; i < chargeList.Length; i++)
{
if (chargeList[i].DateStart > DateTime.Today) //not started yet
{
continue;
}
//if(chargeList[i].DateStop.Year>1880//not blank
// && chargeList[i].DateStop<DateTime.Today)//but already ended
//{
// continue;
//}
//get a list dates of all completed procedures with this Code and patNum
ArrayList ALdates = RepeatCharges.GetDates(ProcedureCodes.GetCodeNum(chargeList[i].ProcCode), chargeList[i].PatNum);
possibleDate = chargeList[i].DateStart;
//start looping through possible dates, beginning with the start date of the repeating charge
while (possibleDate <= DateTime.Today)
{
if (possibleDate < DateTime.Today.AddMonths(-3))
{
possibleDate = possibleDate.AddMonths(1);
continue; //don't go back more than three months
}
//check to see if the possible date is present in the list
if (ALdates.Contains(possibleDate))
{
possibleDate = possibleDate.AddMonths(1);
continue;
}
if (chargeList[i].DateStop.Year > 1880 && //not blank
chargeList[i].DateStop < possibleDate) //but already ended
{
break;
}
//otherwise, insert a procedure to db
proc = new Procedure();
proc.CodeNum = ProcedureCodes.GetCodeNum(chargeList[i].ProcCode);
proc.DateEntryC = DateTime.Today;
proc.PatNum = chargeList[i].PatNum;
proc.ProcDate = possibleDate;
proc.DateTP = possibleDate;
proc.ProcFee = chargeList[i].ChargeAmt;
proc.ProcStatus = ProcStat.C;
proc.ProvNum = PrefC.GetLong(PrefName.PracticeDefaultProv);
proc.MedicalCode = ProcedureCodes.GetProcCode(proc.CodeNum).MedicalCode;
proc.BaseUnits = ProcedureCodes.GetProcCode(proc.CodeNum).BaseUnits;
Procedures.Insert(proc); //no recall synch needed because dental offices don't use this feature
countAdded++;
possibleDate = possibleDate.AddMonths(1);
}
}
MessageBox.Show(countAdded.ToString() + " " + Lan.g(this, "procedures added."));
DialogResult = DialogResult.OK;
}
private void butOK_Click(object sender, System.EventArgs e)
{
RepeatCharge[] chargeList = RepeatCharges.Refresh(0); //Gets all repeating charges for all patients, they may be disabled
int countAdded = 0;
int claimsAdded = 0;
DateTime startDate;
Procedure proc;
for (int i = 0; i < chargeList.Length; i++)
{
if (!chargeList[i].IsEnabled) //first make sure it is not disabled
{
continue;
}
if (chargeList[i].DateStart > DateTime.Today) //not started yet
{
continue;
}
//if(chargeList[i].DateStop.Year>1880//not blank
// && chargeList[i].DateStop<DateTime.Today)//but already ended
//{
// continue;
//}
//get a list dates of all completed procedures with this Code and patNum
ArrayList ALdates = RepeatCharges.GetDates(ProcedureCodes.GetCodeNum(chargeList[i].ProcCode), chargeList[i].PatNum);
startDate = chargeList[i].DateStart;
//This is the repeating date using the old methodology. It is necessary for checking if the repeating procedure was already added using the old methodology.
DateTime possibleDateOld = startDate;
//This is a more accurate repeating date which will allow procedures to be added on the 28th and later.
DateTime possibleDateNew = startDate;
int countMonths = 0;
//start looping through possible dates, beginning with the start date of the repeating charge
while (possibleDateNew <= DateTime.Today)
{
//Only allow back dating up to one month and 20 days.
if (possibleDateNew < DateTime.Today.AddDays(-50))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue; //don't go back more than one month and 20 days
}
//check to see if the possible date is present in the list
if (ALdates.Contains(possibleDateNew) ||
ALdates.Contains(possibleDateOld))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue;
}
if (chargeList[i].DateStop.Year > 1880 && //not blank
chargeList[i].DateStop < possibleDateNew) //but already ended
{
break;
}
//otherwise, insert a procedure to db
proc = new Procedure();
proc.CodeNum = ProcedureCodes.GetCodeNum(chargeList[i].ProcCode);
proc.DateEntryC = DateTimeOD.Today;
proc.PatNum = chargeList[i].PatNum;
proc.ProcDate = possibleDateNew;
proc.DateTP = possibleDateNew;
proc.ProcFee = chargeList[i].ChargeAmt;
proc.ProcStatus = ProcStat.C;
proc.ProvNum = PrefC.GetLong(PrefName.PracticeDefaultProv);
proc.MedicalCode = ProcedureCodes.GetProcCode(proc.CodeNum).MedicalCode;
proc.BaseUnits = ProcedureCodes.GetProcCode(proc.CodeNum).BaseUnits;
proc.DiagnosticCode = PrefC.GetString(PrefName.ICD9DefaultForNewProcs);
//Check if the repeating charge has been flagged to copy it's note into the billing note of the procedure.
if (chargeList[i].CopyNoteToProc)
{
proc.BillingNote = chargeList[i].Note;
}
Procedures.Insert(proc); //no recall synch needed because dental offices don't use this feature
countAdded++;
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
if (chargeList[i].CreatesClaim && !ProcedureCodes.GetProcCode(chargeList[i].ProcCode).NoBillIns)
{
List <PatPlan> patPlanList = PatPlans.Refresh(chargeList[i].PatNum);
List <InsSub> subList = InsSubs.RefreshForFam(Patients.GetFamily(chargeList[i].PatNum));
List <InsPlan> insPlanList = InsPlans.RefreshForSubList(subList);;
List <Benefit> benefitList = Benefits.Refresh(patPlanList, subList);
Claim claimCur;
List <Procedure> procCurList = new List <Procedure>();
procCurList.Add(proc);
if (patPlanList.Count == 0) //no current insurance, do not create a claim
{
continue;
}
//create the claimprocs
Procedures.ComputeEstimates(proc, proc.PatNum, new List <ClaimProc>(), true, insPlanList, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
//get claimprocs for this proc, may be more than one
List <ClaimProc> claimProcList = ClaimProcs.GetForProc(ClaimProcs.Refresh(proc.PatNum), proc.ProcNum);
string claimType = "P";
if (patPlanList.Count == 1 && PatPlans.GetOrdinal(PriSecMed.Medical, patPlanList, insPlanList, subList) > 0) //if there's exactly one medical plan
{
claimType = "Med";
}
claimCur = CreateClaim(claimType, patPlanList, insPlanList, claimProcList, proc, subList);
claimProcList = ClaimProcs.Refresh(proc.PatNum);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
if (PatPlans.GetOrdinal(PriSecMed.Secondary, patPlanList, insPlanList, subList) > 0 && //if there exists a secondary plan
!CultureInfo.CurrentCulture.Name.EndsWith("CA")) //and not canada (don't create secondary claim for canada)
{
claimCur = CreateClaim("S", patPlanList, insPlanList, claimProcList, proc, subList);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
claimProcList = ClaimProcs.Refresh(proc.PatNum);
claimCur.ClaimStatus = "H";
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
}
}
}
}
//MessageBox.Show(countAdded.ToString()+" "+Lan.g(this,"procedures added."));
MessageBox.Show(countAdded.ToString() + " " + Lan.g(this, "procedures added.") + "\r\n" + claimsAdded.ToString() + " " + Lan.g(this, "claims added."));
DialogResult = DialogResult.OK;
}