internal void FireNotice(NpgsqlError e)
{
if (Notice != null)
{
try
{
Notice(this, new NpgsqlNoticeEventArgs(e));
}
catch
{
} //Eat exceptions from user code.
}
}
internal NpgsqlNoticeEventArgs(NpgsqlError eNotice)
{
Notice = eNotice;
}
/*/// <value>Counts the numbers of Connections that share
* /// this Connector. Used in Release() to decide wether this
* /// connector is to be moved to the PooledConnectors list.</value>
* // internal int mShareCount;*/
/// <summary>
/// Opens the physical connection to the server.
/// </summary>
/// <remarks>Usually called by the RequestConnector
/// Method of the connection pool manager.</remarks>
internal void Open()
{
ServerVersion = null;
// If Connection.ConnectionString specifies a protocol version, we will
// not try to fall back to version 2 on failure.
_backendProtocolVersion = (settings.Protocol == ProtocolVersion.Unknown)
? ProtocolVersion.Version3
: settings.Protocol;
// Reset state to initialize new connector in pool.
CurrentState = NpgsqlClosedState.Instance;
// Keep track of time remaining; Even though there may be multiple timeout-able calls,
// this allows us to still respect the caller's timeout expectation.
int connectTimeRemaining = this.ConnectionTimeout * 1000;
DateTime attemptStart = DateTime.Now;
// Get a raw connection, possibly SSL...
CurrentState.Open(this, connectTimeRemaining);
try
{
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
catch (NpgsqlException ne)
{
connectTimeRemaining -= Convert.ToInt32((DateTime.Now - attemptStart).TotalMilliseconds);
// Check for protocol not supported. If we have been told what protocol to use,
// we will not try this step.
if (settings.Protocol != ProtocolVersion.Unknown)
{
throw;
}
// If we attempted protocol version 3, it may be possible to drop back to version 2.
if (BackendProtocolVersion != ProtocolVersion.Version3)
{
throw;
}
NpgsqlError Error0 = (NpgsqlError)ne.Errors[0];
// If NpgsqlError..ctor() encounters a version 2 error,
// it will set its own protocol version to version 2. That way, we can tell
// easily if the error was a FATAL: protocol error.
if (Error0.BackendProtocolVersion != ProtocolVersion.Version2)
{
throw;
}
// Try using the 2.0 protocol.
_mediator.ResetResponses();
BackendProtocolVersion = ProtocolVersion.Version2;
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this, connectTimeRemaining);
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
// Change the state of connection to open and ready.
_connection_state = ConnectionState.Open;
CurrentState = NpgsqlReadyState.Instance;
// Fall back to the old way, SELECT VERSION().
// This should not happen for protocol version 3+.
if (ServerVersion == null)
{
//NpgsqlCommand command = new NpgsqlCommand("set DATESTYLE TO ISO;select version();", this);
//ServerVersion = new Version(PGUtil.ExtractServerVersion((string) command.ExecuteScalar()));
using (NpgsqlCommand command = new NpgsqlCommand("set DATESTYLE TO ISO;select version();", this))
{
ServerVersion = new Version(PGUtil.ExtractServerVersion((string)command.ExecuteScalar()));
}
}
// Adjust client encoding.
NpgsqlParameterStatus clientEncodingParam = null;
if (
!ServerParameters.TryGetValue("client_encoding", out clientEncodingParam) ||
(!string.Equals(clientEncodingParam.ParameterValue, "UTF8", StringComparison.OrdinalIgnoreCase) && !string.Equals(clientEncodingParam.ParameterValue, "UNICODE", StringComparison.OrdinalIgnoreCase))
)
{
new NpgsqlCommand("SET CLIENT_ENCODING TO UTF8", this).ExecuteBlind();
}
if (!string.IsNullOrEmpty(settings.SearchPath))
{
/*NpgsqlParameter p = new NpgsqlParameter("p", DbType.String);
* p.Value = settings.SearchPath;
* NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH TO :p,public", this);
* commandSearchPath.Parameters.Add(p);
* commandSearchPath.ExecuteNonQuery();*/
/*NpgsqlParameter p = new NpgsqlParameter("p", DbType.String);
* p.Value = settings.SearchPath;
* NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH TO :p,public", this);
* commandSearchPath.Parameters.Add(p);
* commandSearchPath.ExecuteNonQuery();*/
// TODO: Add proper message when finding a semicolon in search_path.
// This semicolon could lead to a sql injection security hole as someone could write in connection string:
// searchpath=public;delete from table; and it would be executed.
if (settings.SearchPath.Contains(";"))
{
throw new InvalidOperationException();
}
// This is using string concatenation because set search_path doesn't allow type casting. ::text
NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH=" + settings.SearchPath, this);
commandSearchPath.ExecuteBlind();
}
if (!string.IsNullOrEmpty(settings.ApplicationName))
{
if (!SupportsApplicationName)
{
//TODO
//throw new InvalidOperationException(resman.GetString("Exception_ApplicationNameNotSupported"));
throw new InvalidOperationException("ApplicationName not supported.");
}
if (settings.ApplicationName.Contains(";"))
{
throw new InvalidOperationException();
}
NpgsqlCommand commandApplicationName = new NpgsqlCommand("SET APPLICATION_NAME='" + settings.ApplicationName + "'", this);
commandApplicationName.ExecuteBlind();
}
/*
* Try to set SSL negotiation to 0. As of 2010-03-29, recent problems in SSL library implementations made
* postgresql to add a parameter to set a value when to do this renegotiation or 0 to disable it.
* Currently, Npgsql has a problem with renegotiation so, we are trying to disable it here.
* This only works on postgresql servers where the ssl renegotiation settings is supported of course.
* See http://lists.pgfoundry.org/pipermail/npgsql-devel/2010-February/001065.html for more information.
*/
try
{
NpgsqlCommand commandSslrenegotiation = new NpgsqlCommand("SET ssl_renegotiation_limit=0", this);
commandSslrenegotiation.ExecuteBlind();
}
catch {}
/*
* Set precision digits to maximum value possible. For postgresql before 9 it was 2, after that, it is 3.
* This way, we set first to 2 and then to 3. If there is an error because of 3, it will have been set to 2 at least.
* Check bug report #1010992 for more information.
*/
try
{
NpgsqlCommand commandSingleDoublePrecision = new NpgsqlCommand("SET extra_float_digits=2;SET extra_float_digits=3;", this);
commandSingleDoublePrecision.ExecuteBlind();
}
catch {}
/*
* Set lc_monetary format to 'C' ir order to get a culture agnostic representation of money.
* I noticed that on Windows, even when the lc_monetary is English_United States.UTF-8, negative
* money is formatted as ($value) with parentheses to indicate negative value.
* By going with a culture agnostic format, we get a consistent behavior.
*/
try
{
NpgsqlCommand commandMonetaryFormatC = new NpgsqlCommand("SET lc_monetary='C';", this);
commandMonetaryFormatC.ExecuteBlind();
}
catch
{
}
// Make a shallow copy of the type mapping that the connector will own.
// It is possible that the connector may add types to its private
// mapping that will not be valid to another connector, even
// if connected to the same backend version.
_oidToNameMapping = NpgsqlTypesHelper.CreateAndLoadInitialTypesMapping(this).Clone();
ProcessServerVersion();
// The connector is now fully initialized. Beyond this point, it is
// safe to release it back to the pool rather than closing it.
IsInitialized = true;
}
private Object FastpathV2(Int32 fnid, Boolean resulttype, FastpathArg[] args)
{
// added Oct 7 1998 to give us thread safety
lock (stream)
{
// send the function call
try
{
// 70 is 'F' in ASCII. Note: don't use SendChar() here as it adds padding
// that confuses the backend. The 0 terminates the command line.
stream.WriteByte((Byte)70);
stream.WriteByte((Byte)0);
PGUtil.WriteInt32(stream,fnid);
PGUtil.WriteInt32(stream,args.Length);
for (Int32 i = 0;i < args.Length;i++)
args[i].Send(stream);
// This is needed, otherwise data can be lost
stream.Flush();
}
catch (IOException ioe)
{
//Should be sending exception as second arg.
throw new Exception("postgresql.fp.send: " + ioe.ToString());
}
// Now handle the result
// Now loop, reading the results
Object result = null; // our result
String errorMessage = "";
Byte[] input_buffer = new Byte[512];
Int32 c;
Boolean l_endQuery = false;
while (!l_endQuery)
{
c = (Char)stream.ReadByte();
switch (c)
{
case 'A': // Asynchronous Notify
//TODO: do something with this
Int32 pid = PGUtil.ReadInt32(stream,input_buffer);
String msg = PGUtil.ReadString(stream,conn.Connector.Encoding);
conn.Connector.CheckErrorsAndNotifications();
break;
//------------------------------
// Error message returned
case 'E':
NpgsqlError e = new NpgsqlError(conn.BackendProtocolVersion);
e.ReadFromStream(stream,conn.Connector.Encoding);
errorMessage += e.Message;
break;
//------------------------------
// Notice from backend
case 'N':
NpgsqlError notice = new NpgsqlError(conn.BackendProtocolVersion);
notice.ReadFromStream(stream,conn.Connector.Encoding);
errorMessage += notice.Message;
break;
case 'V':
Char l_nextChar = (Char)stream.ReadByte();
if (l_nextChar == 'G')
{
Int32 sz = PGUtil.ReadInt32(stream,input_buffer);
// Return an Integer if
if (resulttype)
result = PGUtil.ReadInt32(stream,input_buffer);
else
{
Byte[] buf = new Byte[sz];
Int32 bytes_from_stream = 0;
Int32 total_bytes_read = 0;
Int32 size = sz;
do
{
bytes_from_stream = stream.Read(buf, total_bytes_read, size);
total_bytes_read += bytes_from_stream;
size -= bytes_from_stream;
}
while(size > 0);
result = buf;
}
//There should be a trailing '0'
Int32 l_endChar = (Char)stream.ReadByte();
}
else
{
//it must have been a '0', thus no results
}
break;
case 'Z':
l_endQuery = true;
break;
default:
throw new Exception("postgresql.fp.protocol " + c.ToString());
}
}
if ( errorMessage != null )
throw new Exception("postgresql.fp.error" + errorMessage);
return result;
}
}
internal void FireNotice(NpgsqlError e)
{
if (Notice != null)
{
try
{
Notice(this, new NpgsqlNoticeEventArgs(e));
}
catch
{
} //Eat exceptions from user code.
}
}
protected IEnumerable<IServerResponseObject> ProcessBackendResponses_Ver_3(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
using (new ContextResetter(context))
{
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
NpgsqlRowDescription lastRowDescription = null;
List<NpgsqlError> errors = new List<NpgsqlError>();
for (;;)
{
// Check the first Byte of response.
BackEndMessageCode message = (BackEndMessageCode) stream.ReadByte();
switch (message)
{
case BackEndMessageCode.ErrorResponse:
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion, stream);
error.ErrorSql = mediator.SqlSent;
errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!context.RequireReadyForQuery)
{
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
// Get the length in case we're getting AuthenticationGSSContinue
int authDataLength = PGUtil.ReadInt32(stream) - 8;
AuthenticationRequestType authType = (AuthenticationRequestType) PGUtil.ReadInt32(stream);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
case AuthenticationRequestType.AuthenticationClearTextPassword:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
case AuthenticationRequestType.AuthenticationMD5Password:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Password;
byte[] saltUserName = ENCODING_UTF8.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = ENCODING_UTF8.GetBytes(prehash);
crypt_buf = new byte[prehashbytes.Length + 4];
stream.Read(crypt_buf, prehashbytes.Length, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
prehashbytes.CopyTo(crypt_buf, 0);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(ENCODING_UTF8.GetBytes(sb.ToString()));
break;
#if WINDOWS && UNMANAGED
case AuthenticationRequestType.AuthenticationSSPI:
{
if (context.IntegratedSecurity)
{
// For SSPI we have to get the IP-Address (hostname doesn't work)
string ipAddressString = ((IPEndPoint)context.Socket.RemoteEndPoint).Address.ToString();
context.SSPI = new SSPIHandler(ipAddressString, "POSTGRES");
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.SSPI.Continue(null));
break;
}
else
{
// TODO: correct exception
throw new Exception();
}
}
case AuthenticationRequestType.AuthenticationGSSContinue:
{
byte[] authData = new byte[authDataLength];
PGUtil.CheckedStreamRead(stream, authData, 0, authDataLength);
byte[] passwd_read = context.SSPI.Continue(authData);
if (passwd_read.Length != 0)
{
context.Authenticate(passwd_read);
}
break;
}
#endif
default:
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
errors.Add(
new NpgsqlError(context.BackendProtocolVersion,
String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.RowDescription:
yield return lastRowDescription = new NpgsqlRowDescriptionV3(stream, context.OidToNameMapping, context.CompatVersion);
break;
case BackEndMessageCode.ParameterDescription:
// Do nothing,for instance, just read...
int lenght = PGUtil.ReadInt32(stream);
int nb_param = PGUtil.ReadInt16(stream);
for (int i = 0; i < nb_param; i++)
{
int typeoid = PGUtil.ReadInt32(stream);
}
break;
case BackEndMessageCode.DataRow:
yield return new ForwardsOnlyRow(new StringRowReaderV3(lastRowDescription, stream));
break;
case BackEndMessageCode.ReadyForQuery:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
PGUtil.ReadInt32(stream);
stream.ReadByte();
ChangeState(context, NpgsqlReadyState.Instance);
if (errors.Count != 0)
{
throw new NpgsqlException(errors);
}
yield break;
case BackEndMessageCode.BackendKeyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion, stream);
context.BackEndKeyData = backend_keydata;
// Wait for ReadForQuery message
break;
case BackEndMessageCode.NoticeResponse:
// Notices and errors are identical except that we
// just throw notices away completely ignored.
context.FireNotice(new NpgsqlError(context.BackendProtocolVersion, stream));
break;
case BackEndMessageCode.CompletedResponse:
PGUtil.ReadInt32(stream);
yield return new CompletedResponse(stream);
break;
case BackEndMessageCode.ParseComplete:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParseComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream);
yield break;
case BackEndMessageCode.BindComplete:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BindComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream);
yield break;
case BackEndMessageCode.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.NotificationResponse:
// Eat the length
PGUtil.ReadInt32(stream);
context.FireNotification(new NpgsqlNotificationEventArgs(stream, true));
if (context.IsNotificationThreadRunning)
{
yield break;
}
break;
case BackEndMessageCode.ParameterStatus:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
NpgsqlParameterStatus parameterStatus = new NpgsqlParameterStatus(stream);
NpgsqlEventLog.LogMsg(resman, "Log_ParameterStatus", LogLevel.Debug, parameterStatus.Parameter,
parameterStatus.ParameterValue);
context.AddParameterStatus(parameterStatus);
if (parameterStatus.Parameter == "server_version")
{
// Deal with this here so that if there are
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
string versionString = parameterStatus.ParameterValue.Trim();
for (int idx = 0; idx != versionString.Length; ++idx)
{
char c = parameterStatus.ParameterValue[idx];
if (!char.IsDigit(c) && c != '.')
{
versionString = versionString.Substring(0, idx);
break;
}
}
context.ServerVersion = new Version(versionString);
}
break;
case BackEndMessageCode.NoData:
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.CopyInResponse:
// Enter COPY sub protocol and start pushing data to server
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyInResponse");
ChangeState(context, NpgsqlCopyInState.Instance);
PGUtil.ReadInt32(stream); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyOutResponse:
// Enter COPY sub protocol and start pulling data from server
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyOutResponse");
ChangeState(context, NpgsqlCopyOutState.Instance);
PGUtil.ReadInt32(stream); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyData");
Int32 len = PGUtil.ReadInt32(stream) - 4;
byte[] buf = new byte[len];
PGUtil.ReadBytes(stream, buf, 0, len);
context.Mediator.ReceivedCopyData = buf;
yield break; // read data from server one chunk at a time while staying in copy operation mode
case BackEndMessageCode.CopyDone:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyDone");
PGUtil.ReadInt32(stream); // CopyDone can not have content so this is always 4
// This will be followed by normal CommandComplete + ReadyForQuery so no op needed
break;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throwing an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char) message));
}
}
}
}
protected IEnumerable <IServerResponseObject> ProcessBackendResponses_Ver_3(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
using (new ContextResetter(context))
{
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
List <NpgsqlError> errors = new List <NpgsqlError>();
for (;;)
{
// Check the first Byte of response.
BackEndMessageCode message = (BackEndMessageCode)stream.ReadByte();
switch (message)
{
case BackEndMessageCode.ErrorResponse:
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion, stream);
error.ErrorSql = mediator.SqlSent;
errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!context.RequireReadyForQuery)
{
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
// Get the length in case we're getting AuthenticationGSSContinue
int authDataLength = PGUtil.ReadInt32(stream) - 8;
AuthenticationRequestType authType = (AuthenticationRequestType)PGUtil.ReadInt32(stream);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
case AuthenticationRequestType.AuthenticationClearTextPassword:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
case AuthenticationRequestType.AuthenticationMD5Password:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Password;
byte[] saltUserName = BackendEncoding.UTF8Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = BackendEncoding.UTF8Encoding.GetBytes(prehash);
crypt_buf = new byte[prehashbytes.Length + 4];
stream.Read(crypt_buf, prehashbytes.Length, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
prehashbytes.CopyTo(crypt_buf, 0);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(BackendEncoding.UTF8Encoding.GetBytes(sb.ToString()));
break;
#if WINDOWS && UNMANAGED
case AuthenticationRequestType.AuthenticationSSPI:
{
if (context.IntegratedSecurity)
{
// For SSPI we have to get the IP-Address (hostname doesn't work)
string ipAddressString = ((IPEndPoint)context.Socket.RemoteEndPoint).Address.ToString();
context.SSPI = new SSPIHandler(ipAddressString, "POSTGRES");
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.SSPI.Continue(null));
break;
}
else
{
// TODO: correct exception
throw new Exception();
}
}
case AuthenticationRequestType.AuthenticationGSSContinue:
{
byte[] authData = new byte[authDataLength];
PGUtil.CheckedStreamRead(stream, authData, 0, authDataLength);
byte[] passwd_read = context.SSPI.Continue(authData);
if (passwd_read.Length != 0)
{
context.Authenticate(passwd_read);
}
break;
}
#endif
default:
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
errors.Add(
new NpgsqlError(context.BackendProtocolVersion,
String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.RowDescription:
yield return(new NpgsqlRowDescriptionV3(stream, context.OidToNameMapping, context.CompatVersion));
break;
case BackEndMessageCode.ParameterDescription:
// Do nothing,for instance, just read...
int lenght = PGUtil.ReadInt32(stream);
int nb_param = PGUtil.ReadInt16(stream);
for (int i = 0; i < nb_param; i++)
{
int typeoid = PGUtil.ReadInt32(stream);
}
break;
case BackEndMessageCode.DataRow:
yield return(new StringRowReaderV3(stream));
break;
case BackEndMessageCode.ReadyForQuery:
// NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
PGUtil.ReadInt32(stream);
stream.ReadByte();
ChangeState(context, NpgsqlReadyState.Instance);
if (errors.Count != 0)
{
throw new NpgsqlException(errors);
}
yield break;
case BackEndMessageCode.BackendKeyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion, stream);
context.BackEndKeyData = backend_keydata;
// Wait for ReadForQuery message
break;
case BackEndMessageCode.NoticeResponse:
// Notices and errors are identical except that we
// just throw notices away completely ignored.
context.FireNotice(new NpgsqlError(context.BackendProtocolVersion, stream));
break;
case BackEndMessageCode.CompletedResponse:
PGUtil.ReadInt32(stream);
yield return(new CompletedResponse(stream));
break;
case BackEndMessageCode.ParseComplete:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParseComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.BindComplete:
// NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BindComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.NotificationResponse:
// Eat the length
PGUtil.ReadInt32(stream);
context.FireNotification(new NpgsqlNotificationEventArgs(stream, true));
if (context.IsNotificationThreadRunning)
{
yield break;
}
break;
case BackEndMessageCode.ParameterStatus:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
NpgsqlParameterStatus parameterStatus = new NpgsqlParameterStatus(stream);
NpgsqlEventLog.LogMsg(resman, "Log_ParameterStatus", LogLevel.Debug, parameterStatus.Parameter,
parameterStatus.ParameterValue);
context.AddParameterStatus(parameterStatus);
if (parameterStatus.Parameter == "server_version")
{
// Deal with this here so that if there are
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
string versionString = parameterStatus.ParameterValue.Trim();
for (int idx = 0; idx != versionString.Length; ++idx)
{
char c = parameterStatus.ParameterValue[idx];
if (!char.IsDigit(c) && c != '.')
{
versionString = versionString.Substring(0, idx);
break;
}
}
context.ServerVersion = new Version(versionString);
}
break;
case BackEndMessageCode.NoData:
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
PGUtil.ReadInt32(stream);
break;
case BackEndMessageCode.CopyInResponse:
// Enter COPY sub protocol and start pushing data to server
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyInResponse");
ChangeState(context, NpgsqlCopyInState.Instance);
PGUtil.ReadInt32(stream); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyOutResponse:
// Enter COPY sub protocol and start pulling data from server
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyOutResponse");
ChangeState(context, NpgsqlCopyOutState.Instance);
PGUtil.ReadInt32(stream); // length redundant
context.CurrentState.StartCopy(context, ReadCopyHeader(stream));
yield break;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyData");
Int32 len = PGUtil.ReadInt32(stream) - 4;
byte[] buf = new byte[len];
PGUtil.ReadBytes(stream, buf, 0, len);
context.Mediator.ReceivedCopyData = buf;
yield break; // read data from server one chunk at a time while staying in copy operation mode
case BackEndMessageCode.CopyDone:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CopyDone");
PGUtil.ReadInt32(stream); // CopyDone can not have content so this is always 4
// This will be followed by normal CommandComplete + ReadyForQuery so no op needed
break;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throwing an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char)message));
}
}
}
}
private Object FastpathV3(Int32 fnid, Boolean resulttype, FastpathArg[] args)
{
// give thread safety
lock (stream)
{
// send the function call
{
Int32 l_msgLen = 0;
l_msgLen += 16;
for (Int32 i = 0; i < args.Length; i++)
{
l_msgLen += args[i].SendSize();
}
stream
.WriteByte(ASCIIByteArrays.FunctionCallMessageCode)
.WriteInt32(l_msgLen)
.WriteInt32(fnid)
.WriteInt16(1)
.WriteInt16(1)
.WriteInt16((short)args.Length);
for (Int32 i = 0; i < args.Length; i++)
{
args[i].Send(stream);
}
stream.WriteInt16(1);
// This is needed, otherwise data can be lost
stream.Flush();
}
// Now handle the result
// Now loop, reading the results
Object result = null; // our result
Exception error = null;
Int32 c;
Boolean l_endQuery = false;
while (!l_endQuery)
{
c = (Char) stream.ReadByte();
switch (c)
{
case 'A': // Asynchronous Notify
Int32 msglen = stream.ReadInt32();
Int32 pid = stream.ReadInt32();
String msg = stream.ReadString();
stream.ReadString();
String param = stream.ReadString();
break;
//------------------------------
// Error message returned
case 'E':
NpgsqlError e = new NpgsqlError(stream);
throw new NpgsqlException(e.ToString());
//------------------------------
// Notice from backend
case 'N':
Int32 l_nlen = stream.ReadInt32();
conn.Connector.FireNotice(new NpgsqlError(stream));
break;
case 'V':
Int32 l_msgLen = stream.ReadInt32();
Int32 l_valueLen = stream.ReadInt32();
if (l_valueLen == -1)
{
//null value
}
else if (l_valueLen == 0)
{
result = new Byte[0];
}
else
{
// Return an Integer if
if (resulttype)
{
result = stream.ReadInt32();
}
else
{
Byte[] buf = new Byte[l_valueLen];
Int32 bytes_from_stream = 0;
Int32 total_bytes_read = 0;
Int32 size = l_valueLen;
do
{
bytes_from_stream = stream.Read(buf, total_bytes_read, size);
total_bytes_read += bytes_from_stream;
size -= bytes_from_stream;
}
while (size > 0);
result = buf;
}
}
break;
case 'Z':
//TODO: use size better
if (stream.ReadInt32() != 5)
{
throw new Exception("Received Z");
}
//TODO: handle transaction status
Char l_tStatus = (Char) stream.ReadByte();
l_endQuery = true;
break;
default:
throw new Exception(string.Format("postgresql.fp.protocol received {0}", c));
}
}
if (error != null)
{
throw error;
}
return result;
}
}
internal NpgsqlException(NpgsqlError error)
: base(error.ToString())
{
this.errors = new NpgsqlError[1];
errors[0] = error;
}
protected virtual void ProcessBackendResponses_Ver_3( NpgsqlConnector context )
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
// Often used buffers
Byte[] inputBuffer = new Byte[ 4 ];
String Str;
Boolean readyForQuery = false;
byte[] asciiRowBytes = new byte[300];
char[] asciiRowChars = new char[300];
while (!readyForQuery)
{
// Check the first Byte of response.
Int32 message = stream.ReadByte();
switch ( message )
{
case NpgsqlMessageTypes_Ver_3.ErrorResponse :
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion);
error.ReadFromStream(stream, context.Encoding);
error.ErrorSql = mediator.SqlSent;
mediator.Errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (! mediator.RequireReadyForQuery)
{
return;
}
break;
case NpgsqlMessageTypes_Ver_3.AuthenticationRequest :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
// Eat length
PGUtil.ReadInt32(stream, inputBuffer);
{
Int32 authType = PGUtil.ReadInt32(stream, inputBuffer);
if ( authType == NpgsqlMessageTypes_Ver_3.AuthenticationOk )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
}
if ( authType == NpgsqlMessageTypes_Ver_3.AuthenticationClearTextPassword )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState( context, NpgsqlStartupState.Instance );
context.Authenticate(context.Password);
break;
}
if ( authType == NpgsqlMessageTypes_Ver_3.AuthenticationMD5Password )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Encoding.GetBytes(context.Password);
byte[] saltUserName = context.Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder ();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
sb.Append (b.ToString ("x2"));
String prehash = sb.ToString();
byte[] prehashbytes = context.Encoding.GetBytes(prehash);
stream.Read(inputBuffer, 0, 4);
// Send the PasswordPacket.
ChangeState( context, NpgsqlStartupState.Instance );
// 2.
crypt_buf = new byte[prehashbytes.Length + 4];
prehashbytes.CopyTo(crypt_buf, 0);
inputBuffer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder ("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
sb.Append (b.ToString ("x2"));
context.Authenticate(sb.ToString ());
break;
}
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
mediator.Errors.Add(new NpgsqlError(context.BackendProtocolVersion, String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
}
return;
case NpgsqlMessageTypes_Ver_3.RowDescription:
// This is the RowDescription message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "RowDescription");
{
NpgsqlRowDescription rd = new NpgsqlRowDescription(context.BackendProtocolVersion);
rd.ReadFromStream(stream, context.Encoding, context.OidToNameMapping);
mediator.AddRowDescription(rd);
}
// Now wait for the AsciiRow messages.
break;
case NpgsqlMessageTypes_Ver_3.ParameterDescription:
// Do nothing,for instance, just read...
int lenght = PGUtil.ReadInt32(stream, inputBuffer);
int nb_param = PGUtil.ReadInt16(stream, inputBuffer);
for (int i=0; i < nb_param; i++)
{
int typeoid = PGUtil.ReadInt32(stream, inputBuffer);
}
break;
case NpgsqlMessageTypes_Ver_3.DataRow:
// This is the AsciiRow message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "DataRow");
{
NpgsqlAsciiRow asciiRow = new NpgsqlAsciiRow(context.Mediator.LastRowDescription, context.BackendProtocolVersion, asciiRowBytes, asciiRowChars);
asciiRow.ReadFromStream(stream, context.Encoding);
// Add this row to the rows array.
mediator.AddAsciiRow(asciiRow);
}
// Now wait for CompletedResponse message.
break;
case NpgsqlMessageTypes_Ver_3.ReadyForQuery :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
PGUtil.ReadInt32(stream, inputBuffer);
PGUtil.ReadString(stream, context.Encoding, 1);
readyForQuery = true;
ChangeState( context, NpgsqlReadyState.Instance );
break;
case NpgsqlMessageTypes_Ver_3.BackendKeyData :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion);
backend_keydata.ReadFromStream(stream);
mediator.SetBackendKeydata(backend_keydata);
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.NoticeResponse :
// Notices and errors are identical except that we
// just throw notices away completely ignored.
{
NpgsqlError notice = new NpgsqlError(context.BackendProtocolVersion);
notice.ReadFromStream(stream, context.Encoding);
mediator.Notices.Add(notice);
NpgsqlEventLog.LogMsg(resman, "Log_NoticeResponse", LogLevel.Debug, notice.Message);
}
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.CompletedResponse :
// This is the CompletedResponse message.
// Get the string returned.
PGUtil.ReadInt32(stream, inputBuffer);
Str = PGUtil.ReadString(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_CompletedResponse", LogLevel.Debug, Str);
// Add result from the processing.
mediator.AddCompletedResponse(Str);
break;
case NpgsqlMessageTypes_Ver_3.ParseComplete :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParseComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream, inputBuffer);
readyForQuery = true;
break;
case NpgsqlMessageTypes_Ver_3.BindComplete :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BindComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream, inputBuffer);
readyForQuery = true;
break;
case NpgsqlMessageTypes_Ver_3.EmptyQueryResponse :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadInt32(stream, inputBuffer);
break;
case NpgsqlMessageTypes_Ver_3.NotificationResponse :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "NotificationResponse");
// Eat the length
PGUtil.ReadInt32(stream, inputBuffer);
{
// Process ID sending notification
Int32 PID = PGUtil.ReadInt32(stream, inputBuffer);
// Notification string
String notificationResponse = PGUtil.ReadString( stream, context.Encoding );
// Additional info, currently not implemented by PG (empty string always), eat it
PGUtil.ReadString( stream, context.Encoding );
mediator.AddNotification(new NpgsqlNotificationEventArgs(PID, notificationResponse));
}
if (context.IsNotificationThreadRunning)
readyForQuery = true;
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.ParameterStatus :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
NpgsqlParameterStatus parameterStatus = new NpgsqlParameterStatus();
parameterStatus.ReadFromStream(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_ParameterStatus", LogLevel.Debug, parameterStatus.Parameter, parameterStatus.ParameterValue);
mediator.AddParameterStatus(parameterStatus.Parameter, parameterStatus);
if (parameterStatus.Parameter == "server_version")
{
// Add this one under our own name so that if the parameter name
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
mediator.AddParameterStatus("__npgsql_server_version", parameterStatus);
// context.ServerVersionString = parameterStatus.ParameterValue;
}
break;
case NpgsqlMessageTypes_Ver_3.NoData :
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
PGUtil.ReadInt32(stream, inputBuffer);
break;
case -1:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default :
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char)message));
}
}
}
protected virtual void ProcessBackendResponses_Ver_2( NpgsqlConnector context )
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
// Often used buffer
Byte[] inputBuffer = new Byte[ 4 ];
Boolean readyForQuery = false;
byte[] asciiRowBytes = new byte[300];
char[] asciiRowChars = new char[300];
while (!readyForQuery)
{
// Check the first Byte of response.
switch ( stream.ReadByte() )
{
case NpgsqlMessageTypes_Ver_2.ErrorResponse :
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion);
error.ReadFromStream(stream, context.Encoding);
error.ErrorSql = mediator.SqlSent;
mediator.Errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (! mediator.RequireReadyForQuery)
{
return;
}
break;
case NpgsqlMessageTypes_Ver_2.AuthenticationRequest :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
{
Int32 authType = PGUtil.ReadInt32(stream, inputBuffer);
if ( authType == NpgsqlMessageTypes_Ver_2.AuthenticationOk )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
}
if ( authType == NpgsqlMessageTypes_Ver_2.AuthenticationClearTextPassword )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState( context, NpgsqlStartupState.Instance );
context.Authenticate(context.Password);
break;
}
if ( authType == NpgsqlMessageTypes_Ver_2.AuthenticationMD5Password )
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Encoding.GetBytes(context.Password);
byte[] saltUserName = context.Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder ();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
sb.Append (b.ToString ("x2"));
String prehash = sb.ToString();
byte[] prehashbytes = context.Encoding.GetBytes(prehash);
byte[] saltServer = new byte[4];
stream.Read(saltServer, 0, 4);
// Send the PasswordPacket.
ChangeState( context, NpgsqlStartupState.Instance );
// 2.
crypt_buf = new byte[prehashbytes.Length + saltServer.Length];
prehashbytes.CopyTo(crypt_buf, 0);
saltServer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder ("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
sb.Append (b.ToString ("x2"));
context.Authenticate(sb.ToString ());
break;
}
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
mediator.Errors.Add(new NpgsqlError(context.BackendProtocolVersion, String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
}
return;
case NpgsqlMessageTypes_Ver_2.RowDescription:
// This is the RowDescription message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "RowDescription");
{
NpgsqlRowDescription rd = new NpgsqlRowDescription(context.BackendProtocolVersion);
rd.ReadFromStream(stream, context.Encoding, context.OidToNameMapping);
// Initialize the array list which will contain the data from this rowdescription.
mediator.AddRowDescription(rd);
}
// Now wait for the AsciiRow messages.
break;
case NpgsqlMessageTypes_Ver_2.AsciiRow:
// This is the AsciiRow message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AsciiRow");
{
NpgsqlAsciiRow asciiRow = new NpgsqlAsciiRow(context.Mediator.LastRowDescription, context.BackendProtocolVersion, asciiRowBytes, asciiRowChars);
asciiRow.ReadFromStream(stream, context.Encoding);
// Add this row to the rows array.
mediator.AddAsciiRow(asciiRow);
}
// Now wait for CompletedResponse message.
break;
case NpgsqlMessageTypes_Ver_2.BinaryRow:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BinaryRow");
{
NpgsqlBinaryRow binaryRow = new NpgsqlBinaryRow(context.Mediator.LastRowDescription);
binaryRow.ReadFromStream(stream, context.Encoding);
mediator.AddBinaryRow(binaryRow);
}
break;
case NpgsqlMessageTypes_Ver_2.ReadyForQuery :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
readyForQuery = true;
ChangeState( context, NpgsqlReadyState.Instance );
break;
case NpgsqlMessageTypes_Ver_2.BackendKeyData :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion);
backend_keydata.ReadFromStream(stream);
mediator.SetBackendKeydata(backend_keydata);
// Wait for ReadForQuery message
break;
;
case NpgsqlMessageTypes_Ver_2.NoticeResponse :
{
NpgsqlError notice = new NpgsqlError(context.BackendProtocolVersion);
notice.ReadFromStream(stream, context.Encoding);
mediator.Notices.Add(notice);
NpgsqlEventLog.LogMsg(resman, "Log_NoticeResponse", LogLevel.Debug, notice.Message);
}
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_2.CompletedResponse :
// This is the CompletedResponse message.
// Get the string returned.
String result = PGUtil.ReadString(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_CompletedResponse", LogLevel.Debug, result);
// Add result from the processing.
mediator.AddCompletedResponse(result);
// Now wait for ReadyForQuery message.
break;
case NpgsqlMessageTypes_Ver_2.CursorResponse :
// This is the cursor response message.
// It is followed by a C NULL terminated string with the name of
// the cursor in a FETCH case or 'blank' otherwise.
// In this case it should be always 'blank'.
// [FIXME] Get another name for this function.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CursorResponse");
String cursorName = PGUtil.ReadString(stream, context.Encoding);
// Continue waiting for ReadyForQuery message.
break;
case NpgsqlMessageTypes_Ver_2.EmptyQueryResponse :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadString(stream, context.Encoding);
break;
case NpgsqlMessageTypes_Ver_2.NotificationResponse :
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "NotificationResponse");
Int32 PID = PGUtil.ReadInt32(stream, inputBuffer);
String notificationResponse = PGUtil.ReadString( stream, context.Encoding );
mediator.AddNotification(new NpgsqlNotificationEventArgs(PID, notificationResponse));
if (context.IsNotificationThreadRunning)
readyForQuery = true;
// Wait for ReadForQuery message
break;
case -1:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default :
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException("Backend sent unrecognized response type");
}
}
}
IServerMessage ReadMessageInternal()
{
for (;;)
{
// Check the first Byte of response.
Stream.Read(_buffer, 0, 1);
var message = (BackEndMessageCode) _buffer[0];
switch (message)
{
case BackEndMessageCode.ErrorResponse:
var error = new NpgsqlError(Stream);
_log.Trace("Received backend error: " + error.Message);
error.ErrorSql = Mediator.GetSqlSent();
// We normally accumulate errors until the query ends (ReadyForQuery). But
// during the connection phase errors need to be thrown immediately
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (State == ConnectorState.Connecting) {
throw new NpgsqlException(error);
}
_pendingErrors.Add(error);
continue;
case BackEndMessageCode.AuthenticationRequest:
// Get the length in case we're getting AuthenticationGSSContinue
var authDataLength = Stream.ReadInt32() - 8;
var authType = (AuthenticationRequestType)Stream.ReadInt32();
_log.Trace("Received AuthenticationRequest of type " + authType);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
continue;
case AuthenticationRequestType.AuthenticationClearTextPassword:
// Send the PasswordPacket.
SendPasswordMessage(PGUtil.NullTerminateArray(Password));
continue;
case AuthenticationRequestType.AuthenticationMD5Password:
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
var md5 = MD5.Create();
// 1.
var passwd = Password;
var saltUserName = BackendEncoding.UTF8Encoding.GetBytes(UserName);
var cryptBuf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(cryptBuf, 0);
saltUserName.CopyTo(cryptBuf, passwd.Length);
var sb = new StringBuilder();
var hashResult = md5.ComputeHash(cryptBuf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
var prehash = sb.ToString();
var prehashbytes = BackendEncoding.UTF8Encoding.GetBytes(prehash);
cryptBuf = new byte[prehashbytes.Length + 4];
Stream.Read(cryptBuf, prehashbytes.Length, 4);
// Send the PasswordPacket.
// 2.
prehashbytes.CopyTo(cryptBuf, 0);
sb = new StringBuilder("md5");
// This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(cryptBuf);
foreach (var b in hashResult)
{
sb.Append(b.ToString("x2"));
}
SendPasswordMessage(PGUtil.NullTerminateArray(BackendEncoding.UTF8Encoding.GetBytes(sb.ToString())));
continue;
case AuthenticationRequestType.AuthenticationGSS:
{
if (IntegratedSecurity)
{
// For GSSAPI we have to use the supplied hostname
SSPI = new SSPIHandler(Host, "POSTGRES", true);
SendPasswordMessage(SSPI.Continue(null));
continue;
}
else
{
// TODO: correct exception
throw new Exception();
}
}
case AuthenticationRequestType.AuthenticationSSPI:
{
if (IntegratedSecurity)
{
// For SSPI we have to get the IP-Address (hostname doesn't work)
var ipAddressString = ((IPEndPoint)Socket.RemoteEndPoint).Address.ToString();
SSPI = new SSPIHandler(ipAddressString, "POSTGRES", false);
SendPasswordMessage(SSPI.Continue(null));
continue;
}
else
{
// TODO: correct exception
throw new Exception();
}
}
case AuthenticationRequestType.AuthenticationGSSContinue:
{
var authData = new byte[authDataLength];
Stream.CheckedStreamRead(authData, 0, authDataLength);
var passwdRead = SSPI.Continue(authData);
if (passwdRead.Length != 0)
{
SendPasswordMessage(passwdRead);
}
continue;
}
default:
throw new NotSupportedException(String.Format(L10N.AuthenticationMethodNotSupported, authType));
}
case BackEndMessageCode.RowDescription:
_log.Trace("Received RowDescription");
return new NpgsqlRowDescription(Stream, OidToNameMapping);
case BackEndMessageCode.ParameterDescription:
_log.Trace("Received ParameterDescription");
// PostgreSQL has found out what parameter types we must use
Stream.ReadInt32();
var nbParam = Stream.ReadInt16();
var typeoids = new int[nbParam];
for (var i = 0; i < nbParam; i++)
{
typeoids[i] = Stream.ReadInt32(); // typeoid
}
return new ParameterDescriptionResponse(typeoids);
case BackEndMessageCode.DataRow:
_log.Trace("Received DataRow");
State = ConnectorState.Fetching;
return new StringRowReader(Stream);
case BackEndMessageCode.ReadyForQuery:
_log.Trace("Received ReadyForQuery");
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
Stream.ReadInt32();
Stream.ReadByte();
State = ConnectorState.Ready;
if (_pendingErrors.Any()) {
var e = new NpgsqlException(_pendingErrors);
_pendingErrors.Clear();
throw e;
}
return ReadyForQueryMsg.Instance;
case BackEndMessageCode.BackendKeyData:
_log.Trace("Received BackendKeyData");
BackEndKeyData = new NpgsqlBackEndKeyData(Stream);
// Wait for ReadForQuery message
continue;
case BackEndMessageCode.NoticeResponse:
_log.Trace("Received NoticeResponse");
// Notices and errors are identical except that we
// just throw notices away completely ignored.
FireNotice(new NpgsqlError(Stream));
continue;
case BackEndMessageCode.CompletedResponse:
_log.Trace("Received CompletedResponse");
Stream.ReadInt32();
return new CompletedResponse(Stream);
case BackEndMessageCode.ParseComplete:
_log.Trace("Received ParseComplete");
// Just read up the message length.
Stream.ReadInt32();
continue;
case BackEndMessageCode.BindComplete:
_log.Trace("Received BindComplete");
// Just read up the message length.
Stream.ReadInt32();
continue;
case BackEndMessageCode.EmptyQueryResponse:
_log.Trace("Received EmptyQueryResponse");
Stream.ReadInt32();
continue;
case BackEndMessageCode.NotificationResponse:
_log.Trace("Received NotificationResponse");
// Eat the length
Stream.ReadInt32();
FireNotification(new NpgsqlNotificationEventArgs(Stream, true));
if (IsNotificationThreadRunning) {
throw new Exception("Internal state error, notification thread is running");
}
continue;
case BackEndMessageCode.ParameterStatus:
var paramStatus = new NpgsqlParameterStatus(Stream);
_log.TraceFormat("Received ParameterStatus {0}={1}", paramStatus.Parameter, paramStatus.ParameterValue);
AddParameterStatus(paramStatus);
if (paramStatus.Parameter == "server_version")
{
// Deal with this here so that if there are
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
var versionString = paramStatus.ParameterValue.Trim();
for (var idx = 0; idx != versionString.Length; ++idx)
{
var c = paramStatus.ParameterValue[idx];
if (!char.IsDigit(c) && c != '.')
{
versionString = versionString.Substring(0, idx);
break;
}
}
ServerVersion = new Version(versionString);
}
continue;
case BackEndMessageCode.NoData:
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
_log.Trace("Received NoData");
Stream.ReadInt32();
continue;
case BackEndMessageCode.CopyInResponse:
_log.Trace("Received CopyInResponse");
// Enter COPY sub protocol and start pushing data to server
State = ConnectorState.CopyIn;
Stream.ReadInt32(); // length redundant
StartCopyIn(ReadCopyHeader());
return CopyInResponseMsg.Instance;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyOutResponse:
_log.Trace("Received CopyOutResponse");
// Enter COPY sub protocol and start pulling data from server
State = ConnectorState.CopyOut;
Stream.ReadInt32(); // length redundant
StartCopyOut(ReadCopyHeader());
return CopyOutResponseMsg.Instance;
// Either StartCopy called us again to finish the operation or control should be passed for user to feed copy data
case BackEndMessageCode.CopyData:
_log.Trace("Received CopyData");
var len = Stream.ReadInt32() - 4;
var buf = new byte[len];
Stream.ReadBytes(buf, 0, len);
Mediator.ReceivedCopyData = buf;
return CopyDataMsg.Instance;
// read data from server one chunk at a time while staying in copy operation mode
case BackEndMessageCode.CopyDone:
_log.Trace("Received CopyDone");
Stream.ReadInt32(); // CopyDone can not have content so this is always 4
// This will be followed by normal CommandComplete + ReadyForQuery so no op needed
continue;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throwing an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char) message));
}
}
}
protected virtual void ProcessBackendResponses_Ver_3(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
// Often used buffers
Byte[] inputBuffer = new Byte[4];
String Str;
Boolean readyForQuery = false;
byte[] asciiRowBytes = new byte[300];
char[] asciiRowChars = new char[300];
while (!readyForQuery)
{
// Check the first Byte of response.
Int32 message = stream.ReadByte();
switch (message)
{
case NpgsqlMessageTypes_Ver_3.ErrorResponse:
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion);
error.ReadFromStream(stream, context.Encoding);
error.ErrorSql = mediator.SqlSent;
mediator.Errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!mediator.RequireReadyForQuery)
{
return;
}
break;
case NpgsqlMessageTypes_Ver_3.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
// Eat length
PGUtil.ReadInt32(stream, inputBuffer);
{
Int32 authType = PGUtil.ReadInt32(stream, inputBuffer);
if (authType == NpgsqlMessageTypes_Ver_3.AuthenticationOk)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
}
if (authType == NpgsqlMessageTypes_Ver_3.AuthenticationClearTextPassword)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
}
if (authType == NpgsqlMessageTypes_Ver_3.AuthenticationMD5Password)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Encoding.GetBytes(context.Password);
byte[] saltUserName = context.Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = context.Encoding.GetBytes(prehash);
stream.Read(inputBuffer, 0, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
crypt_buf = new byte[prehashbytes.Length + 4];
prehashbytes.CopyTo(crypt_buf, 0);
inputBuffer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(sb.ToString());
break;
}
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
mediator.Errors.Add(new NpgsqlError(context.BackendProtocolVersion, String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
}
return;
case NpgsqlMessageTypes_Ver_3.RowDescription:
// This is the RowDescription message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "RowDescription");
{
NpgsqlRowDescription rd = new NpgsqlRowDescription(context.BackendProtocolVersion);
rd.ReadFromStream(stream, context.Encoding, context.OidToNameMapping);
mediator.AddRowDescription(rd);
}
// Now wait for the AsciiRow messages.
break;
case NpgsqlMessageTypes_Ver_3.ParameterDescription:
// Do nothing,for instance, just read...
int lenght = PGUtil.ReadInt32(stream, inputBuffer);
int nb_param = PGUtil.ReadInt16(stream, inputBuffer);
for (int i = 0; i < nb_param; i++)
{
int typeoid = PGUtil.ReadInt32(stream, inputBuffer);
}
break;
case NpgsqlMessageTypes_Ver_3.DataRow:
// This is the AsciiRow message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "DataRow");
{
NpgsqlAsciiRow asciiRow = new NpgsqlAsciiRow(context.Mediator.LastRowDescription, context.BackendProtocolVersion, asciiRowBytes, asciiRowChars);
asciiRow.ReadFromStream(stream, context.Encoding);
// Add this row to the rows array.
mediator.AddAsciiRow(asciiRow);
}
// Now wait for CompletedResponse message.
break;
case NpgsqlMessageTypes_Ver_3.ReadyForQuery:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
// Possible status bytes returned:
// I = Idle (no transaction active).
// T = In transaction, ready for more.
// E = Error in transaction, queries will fail until transaction aborted.
// Just eat the status byte, we have no use for it at this time.
PGUtil.ReadInt32(stream, inputBuffer);
PGUtil.ReadString(stream, context.Encoding, 1);
readyForQuery = true;
ChangeState(context, NpgsqlReadyState.Instance);
break;
case NpgsqlMessageTypes_Ver_3.BackendKeyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion);
backend_keydata.ReadFromStream(stream);
mediator.SetBackendKeydata(backend_keydata);
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.NoticeResponse:
// Notices and errors are identical except that we
// just throw notices away completely ignored.
{
NpgsqlError notice = new NpgsqlError(context.BackendProtocolVersion);
notice.ReadFromStream(stream, context.Encoding);
mediator.Notices.Add(notice);
NpgsqlEventLog.LogMsg(resman, "Log_NoticeResponse", LogLevel.Debug, notice.Message);
}
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.CompletedResponse:
// This is the CompletedResponse message.
// Get the string returned.
PGUtil.ReadInt32(stream, inputBuffer);
Str = PGUtil.ReadString(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_CompletedResponse", LogLevel.Debug, Str);
// Add result from the processing.
mediator.AddCompletedResponse(Str);
break;
case NpgsqlMessageTypes_Ver_3.ParseComplete:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParseComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream, inputBuffer);
readyForQuery = true;
break;
case NpgsqlMessageTypes_Ver_3.BindComplete:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BindComplete");
// Just read up the message length.
PGUtil.ReadInt32(stream, inputBuffer);
readyForQuery = true;
break;
case NpgsqlMessageTypes_Ver_3.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadInt32(stream, inputBuffer);
break;
case NpgsqlMessageTypes_Ver_3.NotificationResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "NotificationResponse");
// Eat the length
PGUtil.ReadInt32(stream, inputBuffer);
{
// Process ID sending notification
Int32 PID = PGUtil.ReadInt32(stream, inputBuffer);
// Notification string
String notificationResponse = PGUtil.ReadString(stream, context.Encoding);
// Additional info, currently not implemented by PG (empty string always), eat it
PGUtil.ReadString(stream, context.Encoding);
mediator.AddNotification(new NpgsqlNotificationEventArgs(PID, notificationResponse));
}
if (context.IsNotificationThreadRunning)
{
readyForQuery = true;
}
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_3.ParameterStatus:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
NpgsqlParameterStatus parameterStatus = new NpgsqlParameterStatus();
parameterStatus.ReadFromStream(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_ParameterStatus", LogLevel.Debug, parameterStatus.Parameter, parameterStatus.ParameterValue);
mediator.AddParameterStatus(parameterStatus.Parameter, parameterStatus);
if (parameterStatus.Parameter == "server_version")
{
// Add this one under our own name so that if the parameter name
// changes in a future backend version, we can handle it here in the
// protocol handler and leave everybody else put of it.
mediator.AddParameterStatus("__npgsql_server_version", parameterStatus);
// context.ServerVersionString = parameterStatus.ParameterValue;
}
break;
case NpgsqlMessageTypes_Ver_3.NoData:
// This nodata message may be generated by prepare commands issued with queries which doesn't return rows
// for example insert, update or delete.
// Just eat the message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ParameterStatus");
PGUtil.ReadInt32(stream, inputBuffer);
break;
case -1:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException(String.Format("Backend sent unrecognized response type: {0}", (Char)message));
}
}
}
protected virtual void ProcessBackendResponses_Ver_2(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
// Often used buffer
Byte[] inputBuffer = new Byte[4];
Boolean readyForQuery = false;
byte[] asciiRowBytes = new byte[300];
char[] asciiRowChars = new char[300];
while (!readyForQuery)
{
// Check the first Byte of response.
switch (stream.ReadByte())
{
case NpgsqlMessageTypes_Ver_2.ErrorResponse:
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion);
error.ReadFromStream(stream, context.Encoding);
error.ErrorSql = mediator.SqlSent;
mediator.Errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!mediator.RequireReadyForQuery)
{
return;
}
break;
case NpgsqlMessageTypes_Ver_2.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
{
Int32 authType = PGUtil.ReadInt32(stream, inputBuffer);
if (authType == NpgsqlMessageTypes_Ver_2.AuthenticationOk)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
}
if (authType == NpgsqlMessageTypes_Ver_2.AuthenticationClearTextPassword)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
}
if (authType == NpgsqlMessageTypes_Ver_2.AuthenticationMD5Password)
{
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Encoding.GetBytes(context.Password);
byte[] saltUserName = context.Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = context.Encoding.GetBytes(prehash);
byte[] saltServer = new byte[4];
stream.Read(saltServer, 0, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
crypt_buf = new byte[prehashbytes.Length + saltServer.Length];
prehashbytes.CopyTo(crypt_buf, 0);
saltServer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(sb.ToString());
break;
}
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
mediator.Errors.Add(new NpgsqlError(context.BackendProtocolVersion, String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
}
return;
case NpgsqlMessageTypes_Ver_2.RowDescription:
// This is the RowDescription message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "RowDescription");
{
NpgsqlRowDescription rd = new NpgsqlRowDescription(context.BackendProtocolVersion);
rd.ReadFromStream(stream, context.Encoding, context.OidToNameMapping);
// Initialize the array list which will contain the data from this rowdescription.
mediator.AddRowDescription(rd);
}
// Now wait for the AsciiRow messages.
break;
case NpgsqlMessageTypes_Ver_2.AsciiRow:
// This is the AsciiRow message.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AsciiRow");
{
NpgsqlAsciiRow asciiRow = new NpgsqlAsciiRow(context.Mediator.LastRowDescription, context.BackendProtocolVersion, asciiRowBytes, asciiRowChars);
asciiRow.ReadFromStream(stream, context.Encoding);
// Add this row to the rows array.
mediator.AddAsciiRow(asciiRow);
}
// Now wait for CompletedResponse message.
break;
case NpgsqlMessageTypes_Ver_2.BinaryRow:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BinaryRow");
{
NpgsqlBinaryRow binaryRow = new NpgsqlBinaryRow(context.Mediator.LastRowDescription);
binaryRow.ReadFromStream(stream, context.Encoding);
mediator.AddBinaryRow(binaryRow);
}
break;
case NpgsqlMessageTypes_Ver_2.ReadyForQuery:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "ReadyForQuery");
readyForQuery = true;
ChangeState(context, NpgsqlReadyState.Instance);
break;
case NpgsqlMessageTypes_Ver_2.BackendKeyData:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "BackendKeyData");
// BackendKeyData message.
NpgsqlBackEndKeyData backend_keydata = new NpgsqlBackEndKeyData(context.BackendProtocolVersion);
backend_keydata.ReadFromStream(stream);
mediator.SetBackendKeydata(backend_keydata);
// Wait for ReadForQuery message
break;
;
case NpgsqlMessageTypes_Ver_2.NoticeResponse:
{
NpgsqlError notice = new NpgsqlError(context.BackendProtocolVersion);
notice.ReadFromStream(stream, context.Encoding);
mediator.Notices.Add(notice);
NpgsqlEventLog.LogMsg(resman, "Log_NoticeResponse", LogLevel.Debug, notice.Message);
}
// Wait for ReadForQuery message
break;
case NpgsqlMessageTypes_Ver_2.CompletedResponse:
// This is the CompletedResponse message.
// Get the string returned.
String result = PGUtil.ReadString(stream, context.Encoding);
NpgsqlEventLog.LogMsg(resman, "Log_CompletedResponse", LogLevel.Debug, result);
// Add result from the processing.
mediator.AddCompletedResponse(result);
// Now wait for ReadyForQuery message.
break;
case NpgsqlMessageTypes_Ver_2.CursorResponse:
// This is the cursor response message.
// It is followed by a C NULL terminated string with the name of
// the cursor in a FETCH case or 'blank' otherwise.
// In this case it should be always 'blank'.
// [FIXME] Get another name for this function.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CursorResponse");
String cursorName = PGUtil.ReadString(stream, context.Encoding);
// Continue waiting for ReadyForQuery message.
break;
case NpgsqlMessageTypes_Ver_2.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadString(stream, context.Encoding);
break;
case NpgsqlMessageTypes_Ver_2.NotificationResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "NotificationResponse");
Int32 PID = PGUtil.ReadInt32(stream, inputBuffer);
String notificationResponse = PGUtil.ReadString(stream, context.Encoding);
mediator.AddNotification(new NpgsqlNotificationEventArgs(PID, notificationResponse));
if (context.IsNotificationThreadRunning)
{
readyForQuery = true;
}
// Wait for ReadForQuery message
break;
case -1:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
// FIXME
// what exception should we really throw here?
throw new NotSupportedException("Backend sent unrecognized response type");
}
}
}
BackendMessage DoReadSingleMessage(DataRowLoadingMode dataRowLoadingMode = DataRowLoadingMode.NonSequential, bool ignoreNotifications = true)
{
NpgsqlError error = null;
while (true)
{
var buf = Buffer;
Buffer.Ensure(5);
var messageCode = (BackendMessageCode) Buffer.ReadByte();
Contract.Assume(Enum.IsDefined(typeof(BackendMessageCode), messageCode), "Unknown message code: " + messageCode);
var len = Buffer.ReadInt32() - 4; // Transmitted length includes itself
if (messageCode == BackendMessageCode.DataRow && dataRowLoadingMode != DataRowLoadingMode.NonSequential)
{
if (dataRowLoadingMode == DataRowLoadingMode.Skip)
{
Buffer.Skip(len);
continue;
}
}
else if (len > Buffer.ReadBytesLeft)
{
buf = buf.EnsureOrAllocateTemp(len);
}
var msg = ParseServerMessage(buf, messageCode, len, dataRowLoadingMode);
if (msg != null || !ignoreNotifications && (messageCode == BackendMessageCode.NoticeResponse || messageCode == BackendMessageCode.NotificationResponse))
{
if (error != null)
{
Contract.Assert(messageCode == BackendMessageCode.ReadyForQuery, "Expected ReadyForQuery after ErrorResponse");
throw new NpgsqlException(error);
}
return msg;
}
else if (messageCode == BackendMessageCode.ErrorResponse)
{
error = new NpgsqlError(buf);
}
}
}
internal NpgsqlException(NpgsqlError error)
: base(error.ToString())
{
this.errors = new NpgsqlError[1];
errors[0] = error;
}
private Object FastpathV2(Int32 fnid, Boolean resulttype, FastpathArg[] args)
{
// added Oct 7 1998 to give us thread safety
lock (stream)
{
// send the function call
stream
.WriteBytesNullTerminated((byte)ASCIIBytes.F)
.WriteInt32(fnid)
.WriteInt32(args.Length);
for (Int32 i = 0; i < args.Length; i++)
{
args[i].Send(stream);
}
// This is needed, otherwise data can be lost
stream.Flush();
// Now handle the result
// Now loop, reading the results
Object result = null; // our result
String errorMessage = "";
Int32 c;
Boolean l_endQuery = false;
while (!l_endQuery)
{
c = (Char) stream.ReadByte();
switch (c)
{
case 'A': // Asynchronous Notify
//TODO: do something with this
Int32 pid = PGUtil.ReadInt32(stream);
String msg = PGUtil.ReadString(stream);
break;
//------------------------------
// Error message returned
case 'E':
NpgsqlError e = new NpgsqlError(conn.BackendProtocolVersion, stream);
errorMessage += e.Message;
break;
//------------------------------
// Notice from backend
case 'N':
NpgsqlError notice = new NpgsqlError(conn.BackendProtocolVersion, stream);
errorMessage += notice.Message;
break;
case 'V':
Char l_nextChar = (Char) stream.ReadByte();
if (l_nextChar == 'G')
{
Int32 sz = PGUtil.ReadInt32(stream);
// Return an Integer if
if (resulttype)
{
result = PGUtil.ReadInt32(stream);
}
else
{
Byte[] buf = new Byte[sz];
Int32 bytes_from_stream = 0;
Int32 total_bytes_read = 0;
Int32 size = sz;
do
{
bytes_from_stream = stream.Read(buf, total_bytes_read, size);
total_bytes_read += bytes_from_stream;
size -= bytes_from_stream;
}
while (size > 0);
result = buf;
}
//There should be a trailing '0'
Int32 l_endChar = (Char) stream.ReadByte();
}
else
{
//it must have been a '0', thus no results
}
break;
case 'Z':
l_endQuery = true;
break;
default:
throw new NpgsqlException(string.Format("postgresql.fp.protocol {0}", c));
}
}
if (errorMessage != null)
{
throw new NpgsqlException("postgresql.fp.error" + errorMessage);
}
return result;
}
}
protected IEnumerable <IServerResponseObject> ProcessBackendResponses_Ver_2(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
using (new ContextResetter(context))
{
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
List <NpgsqlError> errors = new List <NpgsqlError>();
for (;;)
{
// Check the first Byte of response.
switch ((BackEndMessageCode)stream.ReadByte())
{
case BackEndMessageCode.ErrorResponse:
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion, stream);
error.ErrorSql = mediator.GetSqlSent();
errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!context.RequireReadyForQuery)
{
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
AuthenticationRequestType authType = (AuthenticationRequestType)PGUtil.ReadInt32(stream);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
case AuthenticationRequestType.AuthenticationClearTextPassword:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
context.Stream.Flush();
break;
case AuthenticationRequestType.AuthenticationMD5Password:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Password;
byte[] saltUserName = BackendEncoding.UTF8Encoding.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = BackendEncoding.UTF8Encoding.GetBytes(prehash);
byte[] saltServer = new byte[4];
stream.Read(saltServer, 0, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
crypt_buf = new byte[prehashbytes.Length + saltServer.Length];
prehashbytes.CopyTo(crypt_buf, 0);
saltServer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(BackendEncoding.UTF8Encoding.GetBytes(sb.ToString()));
context.Stream.Flush();
break;
default:
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
errors.Add(
new NpgsqlError(context.BackendProtocolVersion,
String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.RowDescription:
yield return(new NpgsqlRowDescriptionV2(stream, context.OidToNameMapping, context.CompatVersion));
break;
case BackEndMessageCode.DataRow:
yield return(new StringRowReaderV2(stream));
break;
case BackEndMessageCode.BinaryRow:
throw new NotSupportedException();
case BackEndMessageCode.ReadyForQuery:
ChangeState(context, NpgsqlReadyState.Instance);
if (errors.Count != 0)
{
throw new NpgsqlException(errors);
}
yield break;
case BackEndMessageCode.BackendKeyData:
context.BackEndKeyData = new NpgsqlBackEndKeyData(context.BackendProtocolVersion, stream);
break;
case BackEndMessageCode.NoticeResponse:
context.FireNotice(new NpgsqlError(context.BackendProtocolVersion, stream));
break;
case BackEndMessageCode.CompletedResponse:
yield return(new CompletedResponse(stream));
break;
case BackEndMessageCode.CursorResponse:
// This is the cursor response message.
// It is followed by a C NULL terminated string with the name of
// the cursor in a FETCH case or 'blank' otherwise.
// In this case it should be always 'blank'.
// [FIXME] Get another name for this function.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CursorResponse");
String cursorName = PGUtil.ReadString(stream);
// Continue waiting for ReadyForQuery message.
break;
case BackEndMessageCode.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadString(stream);
break;
case BackEndMessageCode.NotificationResponse:
context.FireNotification(new NpgsqlNotificationEventArgs(stream, false));
if (context.IsNotificationThreadRunning)
{
yield break;
}
break;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
throw new DataException("Backend sent unrecognized response type");
}
}
}
}
/*/// <value>Counts the numbers of Connections that share
* /// this Connector. Used in Release() to decide wether this
* /// connector is to be moved to the PooledConnectors list.</value>
* // internal int mShareCount;*/
/// <summary>
/// Opens the physical connection to the server.
/// </summary>
/// <remarks>Usually called by the RequestConnector
/// Method of the connection pool manager.</remarks>
internal void Open()
{
ServerVersion = null;
// If Connection.ConnectionString specifies a protocol version, we will
// not try to fall back to version 2 on failure.
_backendProtocolVersion = (settings.Protocol == ProtocolVersion.Unknown)
? ProtocolVersion.Version3
: settings.Protocol;
// Reset state to initialize new connector in pool.
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
try
{
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
catch (NpgsqlException ne)
{
// Check for protocol not supported. If we have been told what protocol to use,
// we will not try this step.
if (settings.Protocol != ProtocolVersion.Unknown)
{
throw;
}
// If we attempted protocol version 3, it may be possible to drop back to version 2.
if (BackendProtocolVersion != ProtocolVersion.Version3)
{
throw;
}
NpgsqlError Error0 = (NpgsqlError)ne.Errors[0];
// If NpgsqlError..ctor() encounters a version 2 error,
// it will set its own protocol version to version 2. That way, we can tell
// easily if the error was a FATAL: protocol error.
if (Error0.BackendProtocolVersion != ProtocolVersion.Version2)
{
throw;
}
// Try using the 2.0 protocol.
_mediator.ResetResponses();
BackendProtocolVersion = ProtocolVersion.Version2;
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
// Change the state of connection to open and ready.
_connection_state = ConnectionState.Open;
CurrentState = NpgsqlReadyState.Instance;
// Fall back to the old way, SELECT VERSION().
// This should not happen for protocol version 3+.
if (ServerVersion == null)
{
NpgsqlCommand command = new NpgsqlCommand("set DATESTYLE TO ISO;select version();", this);
ServerVersion = new Version(PGUtil.ExtractServerVersion((string)command.ExecuteScalar()));
}
// Adjust client encoding.
NpgsqlParameterStatus clientEncodingParam = null;
if (
!ServerParameters.TryGetValue("client_encoding", out clientEncodingParam) ||
(!string.Equals(clientEncodingParam.ParameterValue, "UTF8", StringComparison.OrdinalIgnoreCase) && !string.Equals(clientEncodingParam.ParameterValue, "UNICODE", StringComparison.OrdinalIgnoreCase))
)
{
new NpgsqlCommand("SET CLIENT_ENCODING TO UTF8", this).ExecuteBlind();
}
if (!string.IsNullOrEmpty(settings.SearchPath))
{
/*NpgsqlParameter p = new NpgsqlParameter("p", DbType.String);
* p.Value = settings.SearchPath;
* NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH TO :p,public", this);
* commandSearchPath.Parameters.Add(p);
* commandSearchPath.ExecuteNonQuery();*/
/*NpgsqlParameter p = new NpgsqlParameter("p", DbType.String);
* p.Value = settings.SearchPath;
* NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH TO :p,public", this);
* commandSearchPath.Parameters.Add(p);
* commandSearchPath.ExecuteNonQuery();*/
// TODO: Add proper message when finding a semicolon in search_path.
// This semicolon could lead to a sql injection security hole as someone could write in connection string:
// searchpath=public;delete from table; and it would be executed.
if (settings.SearchPath.Contains(";"))
{
throw new InvalidOperationException();
}
// This is using string concatenation because set search_path doesn't allow type casting. ::text
NpgsqlCommand commandSearchPath = new NpgsqlCommand("SET SEARCH_PATH=" + settings.SearchPath, this);
commandSearchPath.ExecuteBlind();
}
/*
* Try to set SSL negotiation to 0. As of 2010-03-29, recent problems in SSL library implementations made
* postgresql to add a parameter to set a value when to do this renegotiation or 0 to disable it.
* Currently, Npgsql has a problem with renegotiation so, we are trying to disable it here.
* This only works on postgresql servers where the ssl renegotiation settings is supported of course.
* See http://lists.pgfoundry.org/pipermail/npgsql-devel/2010-February/001065.html for more information.
*/
try
{
NpgsqlCommand commandSslrenegotiation = new NpgsqlCommand("SET ssl_renegotiation_limit=0", this);
commandSslrenegotiation.ExecuteBlind();
}
catch {}
// Make a shallow copy of the type mapping that the connector will own.
// It is possible that the connector may add types to its private
// mapping that will not be valid to another connector, even
// if connected to the same backend version.
_oidToNameMapping = NpgsqlTypesHelper.CreateAndLoadInitialTypesMapping(this).Clone();
ProcessServerVersion();
// The connector is now fully initialized. Beyond this point, it is
// safe to release it back to the pool rather than closing it.
IsInitialized = true;
}
protected IEnumerable<IServerResponseObject> ProcessBackendResponses_Ver_2(NpgsqlConnector context)
{
NpgsqlEventLog.LogMethodEnter(LogLevel.Debug, CLASSNAME, "ProcessBackendResponses");
using (new ContextResetter(context))
{
Stream stream = context.Stream;
NpgsqlMediator mediator = context.Mediator;
NpgsqlRowDescription lastRowDescription = null;
List<NpgsqlError> errors = new List<NpgsqlError>();
for (;;)
{
// Check the first Byte of response.
switch ((BackEndMessageCode) stream.ReadByte())
{
case BackEndMessageCode.ErrorResponse:
{
NpgsqlError error = new NpgsqlError(context.BackendProtocolVersion, stream);
error.ErrorSql = mediator.SqlSent;
errors.Add(error);
NpgsqlEventLog.LogMsg(resman, "Log_ErrorResponse", LogLevel.Debug, error.Message);
}
// Return imediately if it is in the startup state or connected state as
// there is no more messages to consume.
// Possible error in the NpgsqlStartupState:
// Invalid password.
// Possible error in the NpgsqlConnectedState:
// No pg_hba.conf configured.
if (!context.RequireReadyForQuery)
{
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.AuthenticationRequest:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "AuthenticationRequest");
AuthenticationRequestType authType = (AuthenticationRequestType) PGUtil.ReadInt32(stream);
switch (authType)
{
case AuthenticationRequestType.AuthenticationOk:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationOK", LogLevel.Debug);
break;
case AuthenticationRequestType.AuthenticationClearTextPassword:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationClearTextRequest", LogLevel.Debug);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
context.Authenticate(context.Password);
break;
case AuthenticationRequestType.AuthenticationMD5Password:
NpgsqlEventLog.LogMsg(resman, "Log_AuthenticationMD5Request", LogLevel.Debug);
// Now do the "MD5-Thing"
// for this the Password has to be:
// 1. md5-hashed with the username as salt
// 2. md5-hashed again with the salt we get from the backend
MD5 md5 = MD5.Create();
// 1.
byte[] passwd = context.Password;
byte[] saltUserName = ENCODING_UTF8.GetBytes(context.UserName);
byte[] crypt_buf = new byte[passwd.Length + saltUserName.Length];
passwd.CopyTo(crypt_buf, 0);
saltUserName.CopyTo(crypt_buf, passwd.Length);
StringBuilder sb = new StringBuilder();
byte[] hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
String prehash = sb.ToString();
byte[] prehashbytes = ENCODING_UTF8.GetBytes(prehash);
byte[] saltServer = new byte[4];
stream.Read(saltServer, 0, 4);
// Send the PasswordPacket.
ChangeState(context, NpgsqlStartupState.Instance);
// 2.
crypt_buf = new byte[prehashbytes.Length + saltServer.Length];
prehashbytes.CopyTo(crypt_buf, 0);
saltServer.CopyTo(crypt_buf, prehashbytes.Length);
sb = new StringBuilder("md5"); // This is needed as the backend expects md5 result starts with "md5"
hashResult = md5.ComputeHash(crypt_buf);
foreach (byte b in hashResult)
{
sb.Append(b.ToString("x2"));
}
context.Authenticate(ENCODING_UTF8.GetBytes(sb.ToString()));
break;
default:
// Only AuthenticationClearTextPassword and AuthenticationMD5Password supported for now.
errors.Add(
new NpgsqlError(context.BackendProtocolVersion,
String.Format(resman.GetString("Exception_AuthenticationMethodNotSupported"), authType)));
throw new NpgsqlException(errors);
}
break;
case BackEndMessageCode.RowDescription:
yield return lastRowDescription = new NpgsqlRowDescriptionV2(stream, context.OidToNameMapping, context.CompatVersion);
;
break;
case BackEndMessageCode.DataRow:
yield return new ForwardsOnlyRow(new StringRowReaderV2(lastRowDescription, stream));
break;
case BackEndMessageCode.BinaryRow:
throw new NotSupportedException();
case BackEndMessageCode.ReadyForQuery:
ChangeState(context, NpgsqlReadyState.Instance);
if (errors.Count != 0)
{
throw new NpgsqlException(errors);
}
yield break;
case BackEndMessageCode.BackendKeyData:
context.BackEndKeyData = new NpgsqlBackEndKeyData(context.BackendProtocolVersion, stream);
break;
case BackEndMessageCode.NoticeResponse:
context.FireNotice(new NpgsqlError(context.BackendProtocolVersion, stream));
break;
case BackEndMessageCode.CompletedResponse:
yield return new CompletedResponse(stream);
break;
case BackEndMessageCode.CursorResponse:
// This is the cursor response message.
// It is followed by a C NULL terminated string with the name of
// the cursor in a FETCH case or 'blank' otherwise.
// In this case it should be always 'blank'.
// [FIXME] Get another name for this function.
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "CursorResponse");
String cursorName = PGUtil.ReadString(stream);
// Continue waiting for ReadyForQuery message.
break;
case BackEndMessageCode.EmptyQueryResponse:
NpgsqlEventLog.LogMsg(resman, "Log_ProtocolMessage", LogLevel.Debug, "EmptyQueryResponse");
PGUtil.ReadString(stream);
break;
case BackEndMessageCode.NotificationResponse:
context.FireNotification(new NpgsqlNotificationEventArgs(stream, false));
if (context.IsNotificationThreadRunning)
{
yield break;
}
break;
case BackEndMessageCode.IO_ERROR:
// Connection broken. Mono returns -1 instead of throw an exception as ms.net does.
throw new IOException();
default:
// This could mean a number of things
// We've gotten out of sync with the backend?
// We need to implement this type?
// Backend has gone insane?
throw new DataException("Backend sent unrecognized response type");
}
}
}
}
/// <summary>
/// Opens the physical connection to the server.
/// </summary>
/// <remarks>Usually called by the RequestConnector
/// Method of the connection pool manager.</remarks>
internal void Open()
{
ServerVersion = null;
// If Connection.ConnectionString specifies a protocol version, we will
// not try to fall back to version 2 on failure.
_backendProtocolVersion = (settings.Protocol == ProtocolVersion.Unknown)
? ProtocolVersion.Version3
: settings.Protocol;
// Reset state to initialize new connector in pool.
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
try
{
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
catch (NpgsqlException ne)
{
// Check for protocol not supported. If we have been told what protocol to use,
// we will not try this step.
if (settings.Protocol != ProtocolVersion.Unknown)
{
throw;
}
// If we attempted protocol version 3, it may be possible to drop back to version 2.
if (BackendProtocolVersion != ProtocolVersion.Version3)
{
throw;
}
NpgsqlError Error0 = (NpgsqlError)ne.Errors[0];
// If NpgsqlError..ctor() encounters a version 2 error,
// it will set its own protocol version to version 2. That way, we can tell
// easily if the error was a FATAL: protocol error.
if (Error0.BackendProtocolVersion != ProtocolVersion.Version2)
{
throw;
}
// Try using the 2.0 protocol.
_mediator.ResetResponses();
BackendProtocolVersion = ProtocolVersion.Version2;
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
// Change the state of connection to open and ready.
State = ConnectionState.Open;
CurrentState = NpgsqlReadyState.Instance;
// Fall back to the old way, SELECT VERSION().
// This should not happen for protocol version 3+.
if (ServerVersion == null)
{
using (NpgsqlCommand command = new NpgsqlCommand("set DATESTYLE TO ISO;select version();", this))
{
ServerVersion = new Version(PGUtil.ExtractServerVersion((string)command.ExecuteScalar()));
}
}
StringBuilder sbInit = new StringBuilder();
// Adjust client encoding.
NpgsqlParameterStatus clientEncodingParam = null;
if (!ServerParameters.TryGetValue("client_encoding", out clientEncodingParam) ||
!string.Equals(clientEncodingParam.ParameterValue, "UTF8", StringComparison.OrdinalIgnoreCase) && !string.Equals(clientEncodingParam.ParameterValue, "UNICODE", StringComparison.OrdinalIgnoreCase))
{
sbInit.AppendLine("SET CLIENT_ENCODING TO UTF8;");
}
if (!string.IsNullOrEmpty(settings.SearchPath))
{
// TODO: Add proper message when finding a semicolon in search_path.
// This semicolon could lead to a sql injection security hole as someone could write in connection string:
// searchpath=public;delete from table; and it would be executed.
if (settings.SearchPath.Contains(";"))
{
throw new InvalidOperationException();
}
sbInit.AppendLine("SET SEARCH_PATH=" + settings.SearchPath + ";");
}
if (!string.IsNullOrEmpty(settings.ApplicationName))
{
if (!SupportsApplicationName)
{
//TODO
//throw new InvalidOperationException(resman.GetString("Exception_ApplicationNameNotSupported"));
throw new InvalidOperationException("ApplicationName not supported.");
}
if (settings.ApplicationName.Contains(";"))
{
throw new InvalidOperationException();
}
sbInit.AppendLine("SET APPLICATION_NAME='" + settings.ApplicationName.Replace('\'', '-') + "';");
}
/*
* Try to set SSL negotiation to 0. As of 2010-03-29, recent problems in SSL library implementations made
* postgresql to add a parameter to set a value when to do this renegotiation or 0 to disable it.
* Currently, Npgsql has a problem with renegotiation so, we are trying to disable it here.
* This only works on postgresql servers where the ssl renegotiation settings is supported of course.
* See http://lists.pgfoundry.org/pipermail/npgsql-devel/2010-February/001065.html for more information.
*/
sbInit.AppendLine("SET ssl_renegotiation_limit=0;");
/*
* Set precision digits to maximum value possible. For postgresql before 9 it was 2, after that, it is 3.
* This way, we set first to 2 and then to 3. If there is an error because of 3, it will have been set to 2 at least.
* Check bug report #1010992 for more information.
*/
sbInit.AppendLine("SET extra_float_digits=3;");
try
{
new NpgsqlCommand(sbInit.ToString(), this).ExecuteBlind();
}
catch
{
foreach (var line in sbInit.ToString().Split(Environment.NewLine.ToCharArray()))
{
try
{
if (line.Length > 0)
{
new NpgsqlCommand(line, this).ExecuteBlind();
}
}
catch { }
}
}
// Make a shallow copy of the type mapping that the connector will own.
// It is possible that the connector may add types to its private
// mapping that will not be valid to another connector, even
// if connected to the same backend version.
_oidToNameMapping = NpgsqlTypesHelper.CreateAndLoadInitialTypesMapping(this).Clone();
ProcessServerVersion();
// The connector is now fully initialized. Beyond this point, it is
// safe to release it back to the pool rather than closing it.
IsInitialized = true;
}
internal NpgsqlNoticeEventArgs(NpgsqlError eNotice)
{
Notice = eNotice;
}
/// <value>Counts the numbers of Connections that share
/// this Connector. Used in Release() to decide wether this
/// connector is to be moved to the PooledConnectors list.</value>
// internal int mShareCount;
/// <summary>
/// Opens the physical connection to the server.
/// </summary>
/// <remarks>Usually called by the RequestConnector
/// Method of the connection pool manager.</remarks>
internal void Open()
{
ProtocolVersion PV;
// If Connection.ConnectionString specifies a protocol version, we will
// not try to fall back to version 2 on failure.
if (ConnectionString.Contains(ConnectionStringKeys.Protocol))
{
PV = ConnectionString.ToProtocolVersion(ConnectionStringKeys.Protocol);
}
else
{
PV = ProtocolVersion.Unknown;
}
_backendProtocolVersion = (PV == ProtocolVersion.Unknown) ? ProtocolVersion.Version3 : PV;
// Reset state to initialize new connector in pool.
Encoding = Encoding.Default;
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
// Check for protocol not supported. If we have been told what protocol to use,
// we will not try this step.
if (_mediator.Errors.Count > 0 && PV == ProtocolVersion.Unknown)
{
// If we attempted protocol version 3, it may be possible to drop back to version 2.
if (BackendProtocolVersion == ProtocolVersion.Version3)
{
NpgsqlError Error0 = (NpgsqlError)_mediator.Errors[0];
// If NpgsqlError.ReadFromStream_Ver_3() encounters a version 2 error,
// it will set its own protocol version to version 2. That way, we can tell
// easily if the error was a FATAL: protocol error.
if (Error0.BackendProtocolVersion == ProtocolVersion.Version2)
{
// Try using the 2.0 protocol.
_mediator.ResetResponses();
BackendProtocolVersion = ProtocolVersion.Version2;
CurrentState = NpgsqlClosedState.Instance;
// Get a raw connection, possibly SSL...
CurrentState.Open(this);
// Establish protocol communication and handle authentication...
CurrentState.Startup(this);
}
}
}
// Check for errors and do the Right Thing.
// FIXME - CheckErrors needs to be moved to Connector
CheckErrors();
_backend_keydata = _mediator.BackendKeyData;
// Change the state of connection to open and ready.
_connection_state = ConnectionState.Open;
CurrentState = NpgsqlReadyState.Instance;
String ServerVersionString = String.Empty;
// First try to determine backend server version using the newest method.
if (((NpgsqlParameterStatus)_mediator.Parameters["__npgsql_server_version"]) != null)
{
ServerVersionString = ((NpgsqlParameterStatus)_mediator.Parameters["__npgsql_server_version"]).ParameterValue;
}
// Fall back to the old way, SELECT VERSION().
// This should not happen for protocol version 3+.
if (ServerVersionString.Length == 0)
{
NpgsqlCommand command = new NpgsqlCommand("select version();set DATESTYLE TO ISO;", this);
ServerVersionString = PGUtil.ExtractServerVersion((String)command.ExecuteScalar());
}
// Cook version string so we can use it for enabling/disabling things based on
// backend version.
ServerVersion = PGUtil.ParseServerVersion(ServerVersionString);
// Adjust client encoding.
//NpgsqlCommand commandEncoding1 = new NpgsqlCommand("show client_encoding", _connector);
//String clientEncoding1 = (String)commandEncoding1.ExecuteScalar();
if (ConnectionString.ToString(ConnectionStringKeys.Encoding, ConnectionStringDefaults.Encoding).ToUpper() == "UNICODE")
{
Encoding = Encoding.UTF8;
NpgsqlCommand commandEncoding = new NpgsqlCommand("SET CLIENT_ENCODING TO UNICODE", this);
commandEncoding.ExecuteNonQuery();
}
// Make a shallow copy of the type mapping that the connector will own.
// It is possible that the connector may add types to its private
// mapping that will not be valid to another connector, even
// if connected to the same backend version.
_oidToNameMapping = NpgsqlTypesHelper.CreateAndLoadInitialTypesMapping(this).Clone();
ProcessServerVersion();
// The connector is now fully initialized. Beyond this point, it is
// safe to release it back to the pool rather than closing it.
IsInitialized = true;
}
BackendMessage DoReadSingleMessage(DataRowLoadingMode dataRowLoadingMode = DataRowLoadingMode.NonSequential, bool ignoreNotifications = true)
{
NpgsqlError error = null;
while (true)
{
var buf = Buffer;
Buffer.Ensure(5);
var messageCode = (BackendMessageCode) Buffer.ReadByte();
Contract.Assume(Enum.IsDefined(typeof(BackendMessageCode), messageCode), "Unknown message code: " + messageCode);
var len = Buffer.ReadInt32() - 4; // Transmitted length includes itself
if (messageCode == BackendMessageCode.DataRow && dataRowLoadingMode != DataRowLoadingMode.NonSequential)
{
if (dataRowLoadingMode == DataRowLoadingMode.Skip)
{
Buffer.Skip(len);
continue;
}
}
else if (len > Buffer.ReadBytesLeft)
{
buf = buf.EnsureOrAllocateTemp(len);
}
var msg = ParseServerMessage(buf, messageCode, len, dataRowLoadingMode);
if (msg != null || !ignoreNotifications && (messageCode == BackendMessageCode.NoticeResponse || messageCode == BackendMessageCode.NotificationResponse))
{
if (error != null)
{
Contract.Assert(messageCode == BackendMessageCode.ReadyForQuery, "Expected ReadyForQuery after ErrorResponse");
throw new NpgsqlException(error);
}
return msg;
}
else if (messageCode == BackendMessageCode.ErrorResponse)
{
// An ErrorResponse is (almost) always followed by a ReadyForQuery. Save the error
// and throw it as an exception when the ReadyForQuery is received (next)
// The exception is during the startup/authentication phase, where the server closes
// the connection after an ErrorResponse
error = new NpgsqlError(buf);
if (State == ConnectorState.Connecting) {
throw new NpgsqlException(error);
}
}
}
}
private Object FastpathV3(Int32 fnid, Boolean resulttype, FastpathArg[] args)
{
// give thread safety
lock (stream)
{
// send the function call
try
{
Int32 l_msgLen = 0;
l_msgLen += 16;
for (Int32 i=0;i < args.Length;i++)
l_msgLen += args[i].SendSize();
stream.WriteByte((Byte)'F');
PGUtil.WriteInt32(stream,l_msgLen);
PGUtil.WriteInt32(stream,fnid);
PGUtil.WriteInt16(stream,1);
PGUtil.WriteInt16(stream,1);
PGUtil.WriteInt16(stream,(short)args.Length);
for (Int32 i = 0;i < args.Length;i++)
args[i].Send(stream);
PGUtil.WriteInt16(stream,1);
// This is needed, otherwise data can be lost
stream.Flush();
}
catch (Exception ex)
{
throw new Exception(ex.ToString());
}
// Now handle the result
// Now loop, reading the results
Object result = null; // our result
Exception error = null;
Int32 c;
Boolean l_endQuery = false;
Byte[] input_buffer = new Byte[512];
while (!l_endQuery)
{
c = (Char)stream.ReadByte();
switch (c)
{
case 'A': // Asynchronous Notify
Int32 msglen = PGUtil.ReadInt32(stream,input_buffer);
Int32 pid = PGUtil.ReadInt32(stream,input_buffer);
String msg = PGUtil.ReadString(stream,conn.Connector.Encoding);
PGUtil.ReadString(stream,conn.Connector.Encoding);
String param = PGUtil.ReadString(stream,conn.Connector.Encoding);
conn.Connector.CheckErrorsAndNotifications();
break;
//------------------------------
// Error message returned
case 'E':
NpgsqlError e = new NpgsqlError(conn.BackendProtocolVersion);
e.ReadFromStream(stream,conn.Connector.Encoding);
throw new Exception(e.ToString());
//------------------------------
// Notice from backend
case 'N':
Int32 l_nlen = PGUtil.ReadInt32(stream,input_buffer);
NpgsqlError e1 = new NpgsqlError(conn.BackendProtocolVersion);
e1.ReadFromStream(stream,conn.Connector.Encoding);
conn.Connector.Mediator.Errors.Add(e1);
break;
case 'V':
Int32 l_msgLen = PGUtil.ReadInt32(stream,input_buffer);
Int32 l_valueLen = PGUtil.ReadInt32(stream,input_buffer);
if (l_valueLen == -1)
{
//null value
}
else if (l_valueLen == 0)
{
result = new Byte[0];
}
else
{
// Return an Integer if
if (resulttype)
result = PGUtil.ReadInt32(stream,input_buffer);
else
{
Byte[] buf = new Byte[l_valueLen];
Int32 bytes_from_stream = 0;
Int32 total_bytes_read = 0;
Int32 size = l_valueLen;
do
{
bytes_from_stream = stream.Read(buf, total_bytes_read, size);
total_bytes_read += bytes_from_stream;
size -= bytes_from_stream;
}
while(size > 0);
result = buf;
}
}
break;
case 'Z':
//TODO: use size better
if (PGUtil.ReadInt32(stream,input_buffer) != 5)
throw new Exception("Received Z" );
//TODO: handle transaction status
Char l_tStatus = (Char)stream.ReadByte();
l_endQuery = true;
break;
default:
throw new Exception("postgresql.fp.protocol received " + c.ToString());
}
}
if ( error != null )
throw error;
return result;
}
}