public Arc ArcCreation(Part workPart, Line line1, Line line2)
{
Tag[] tagg = new Tag[2];
tagg[0] = line1.Tag;
tagg[1] = line2.Tag;
double[] center = new Double[3] {
0, 0, 0
};
int[] trims = new int[3];
trims[0] = 0;
trims[1] = 0;
trims[2] = 0;
int[] alm = new int[2] {
0, 0
};
Tag fillet;
UFSession theUfSession = UFSession.GetUFSession();
theUfSession.Curve.CreateFillet(0, tagg, center, 3, trims, alm, out fillet);
NXOpen.TaggedObject taggedObject = NXOpen.Utilities.NXObjectManager.Get(fillet);
Arc arc = (Arc)taggedObject;
return(arc);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
TaggedObject[] obj = this.selePart.GetSelectedObjects();
if (selectedObject is NXOpen.Assemblies.Component)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(part);
if (info.Type == PartType.Workpiece || info.Type == PartType.Work)
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
if (obj.Length > 0)
{
// Part part = (obj[0] as NXOpen.Assemblies.Component).Prototype as Part;
if (selectedObject is Face)
{
Face seleFace = selectedObject as Face;
Part selePart = (seleFace.Prototype as Face).OwningPart as Part;
if (selePart.Tag == this.selectPart.Tag)
{
return(UFConstants.UF_UI_SEL_ACCEPT);
}
}
else if (selectedObject is Point)
{
return(UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
Model.MoldInfoModel info = builder.Model.Asm.MoldInfo;
if (this.selePart.GetSelectedObjects().Length != 0)
{
Part part = (this.selePart.GetSelectedObjects()[0] as NXOpen.Assemblies.Component).Prototype as Part;
string name = AttributeUtils.GetAttrForString(part, "PartType");
if (name.Equals("Workpiece", StringComparison.CurrentCultureIgnoreCase))
{
return(UFConstants.UF_UI_SEL_ACCEPT);
}
if (selectedObject is Face)
{
Face seleFace = selectedObject as Face;
Part selePart = (seleFace.Prototype as Face).OwningPart as Part;
if (selePart.Tag != part.Tag)
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
if (selectedObject is NXOpen.Assemblies.Component)
{
if (ParentAssmblieInfo.IsWork(selectedObject as NXOpen.Assemblies.Component))
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
string partType = AttributeUtils.GetAttrForString(part, "PartType");
if (!partType.Equals("Electrode"))
{
return(UFConstants.UF_UI_SEL_REJECT);
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
if (selectedObject is NXOpen.Assemblies.Component)
{
NXOpen.Assemblies.Component ct = selectedObject as NXOpen.Assemblies.Component;
if (EDMModel.IsEDM(ct.Prototype as Part))
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
NXOpen.Assemblies.Component ct = selectedObject as NXOpen.Assemblies.Component;
if (ct != null)
{
if (ParentAssmblieInfo.IsElectrode(ct) || ParentAssmblieInfo.IsWorkpiece(ct) || !ParentAssmblieInfo.IsParent(ct) || ParentAssmblieInfo.IsWork(ct))
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_FAILURE);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
NXOpen.Assemblies.Component ct = (selectedObject as NXOpen.Assemblies.Component);
if (ct != null)
{
if (!ParentAssmblieInfo.IsElectrode(ct))
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
if (part != null)
{
if (!ElectrodeModel.IsElectrode(part))
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
if (selectedObject is NXOpen.Assemblies.Component)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(part);
if (info.Type == PartType.Electrode)
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb 过滤选择
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
if (superBox != null && superBox.ToolingBoxFeature != null) //边界盒没高度
{
if (selectedObject is Face)
{
Face face = selectedObject as Face;
if (face.GetBody().Tag == superBox.ToolingBoxFeature.GetBodies()[0].Tag)
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
if (selectedObject is Edge)
{
Edge edge = selectedObject as Edge;
if (edge.GetBody().Tag == superBox.ToolingBoxFeature.GetBodies()[0].Tag)
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
if (selectedObject is Point)
{
Point pt = selectedObject as Point;
int parents;
Tag[] parentTags;
Tag bodyTag = Tag.Null;
int type;
int subtype;
theUFSession.So.AskParents(pt.Tag, UFConstants.UF_SO_ASK_ALL_PARENTS, out parents, out parentTags);
for (int i = 0; i < parents; i++)
{
theUFSession.Obj.AskTypeAndSubtype(parentTags[i], out type, out subtype);
if (type == UFConstants.UF_solid_type)
{
theUFSession.Modl.AskEdgeBody(parentTags[i], out bodyTag);
if (bodyTag == superBox.ToolingBoxFeature.GetBodies()[0].Tag)
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
}
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
NXOpen.Assemblies.Component ct = selectedObject as Component;
Component workPartCt = workPart.ComponentAssembly.RootComponent;
if (ct != null)
{
if (ct.Parent.Equals(workPartCt))
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
else
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_FAILURE);
}
}
else
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
Model.MoldInfoModel info = new Model.MoldInfoModel();
info.GetAttribute(asmPart);
if (this.selePart.GetSelectedObjects().Length != 0)
{
Part part = (this.selePart.GetSelectedObjects()[0] as NXOpen.Assemblies.Component).Prototype as Part;
if (!part.Name.Equals(info.MoldNumber + "-" + info.WorkpieceNumber + info.EditionNumber))
{
return(UFConstants.UF_UI_SEL_REJECT);
}
if (selectedObject is Face)
{
Face seleFace = selectedObject as Face;
Part selePart = (seleFace.Prototype as Face).OwningPart as Part;
if (selePart.Tag != part.Tag)
{
return(UFConstants.UF_UI_SEL_REJECT);
}
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
/// <summary>
/// 简单干涉
/// </summary>
public static NXOpen.GeometricAnalysis.SimpleInterference.Result SimpleInterference(NXOpen.TaggedObject firstBody, NXOpen.TaggedObject secondBody)
{
var workPart = NXOpen.Session.GetSession().Parts.Work;
NXOpen.GeometricAnalysis.SimpleInterference simpleInterference1;
simpleInterference1 = workPart.AnalysisManager.CreateSimpleInterferenceObject();
simpleInterference1.InterferenceType = NXOpen.GeometricAnalysis.SimpleInterference.InterferenceMethod.InterferenceSolid;
simpleInterference1.FaceInterferenceType = NXOpen.GeometricAnalysis.SimpleInterference.FaceInterferenceMethod.FirstPairOnly;
simpleInterference1.FirstBody.Value = firstBody;
simpleInterference1.SecondBody.Value = secondBody;
NXOpen.GeometricAnalysis.SimpleInterference.Result result1;
result1 = simpleInterference1.PerformCheck();
NXOpen.NXObject nXObject1;
nXObject1 = simpleInterference1.Commit();
simpleInterference1.Destroy();
return(result1);
}
public static void Main(string[] args)
{
NXOpen.Session theSession = NXOpen.Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
//Variable Declaration
double a = double.Parse(args[0]);
double G = 1.618;
double b = G * a;
double L = 10;
double t = double.Parse(args[1]);
NXOpen.FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.UseBlankTemplate = false;
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;
fileNew1.TemplatePresentationName = "Model";
fileNew1.ItemType = "";
fileNew1.Specialization = "";
fileNew1.SetCanCreateAltrep(false);
fileNew1.NewFileName = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.prt";
fileNew1.MasterFileName = "";
fileNew1.MakeDisplayedPart = true;
NXOpen.NXObject nXObject1;
nXObject1 = fileNew1.Commit();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
fileNew1.Destroy();
theSession.ApplicationSwitchImmediate("UG_APP_MODELING");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);
NXOpen.Unit unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
NXOpen.Point3d point1 = new NXOpen.Point3d(0, 0, 0);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXOpen.NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = (NXOpen.Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Line...
// ----------------------------------------------
NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint1 = new NXOpen.Point3d(0, b, 0.0);
NXOpen.Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
//
NXOpen.Point3d startPoint2 = new NXOpen.Point3d(0.0, b, 0.0);
NXOpen.Point3d endPoint2 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint3 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Point3d endPoint3 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint4 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Point3d endPoint4 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Features.Feature nullNXOpen_Features_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);
NXOpen.Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
NXOpen.Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
NXOpen.Body[] targetBodies1 = new NXOpen.Body[1];
NXOpen.Body nullNXOpen_Body = null;
targetBodies1[0] = nullNXOpen_Body;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = t.ToString();
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
NXOpen.CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
section1.AddToSection(rules1, null, null, null, helpPoint1, NXOpen.Section.Mode.Create, false);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
NXOpen.Expression expression8 = extrudeBuilder1.Limits.StartExtend.Value;
NXOpen.Expression expression9 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression7);
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.OutputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
NXOpen.TaggedObject[] objects1 = new NXOpen.TaggedObject[0];
igesCreator1.SetDrawingArray(objects1);
NXOpen.NXObject nXObject20;
nXObject20 = igesCreator1.Commit();
igesCreator1.Destroy();
while (!System.IO.File.Exists("J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs"))
{
System.Threading.Thread.Sleep(10);
}
}
public static void Main(string[] args)
{
NXOpen.Session theSession = NXOpen.Session.GetSession();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId1;
markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = "J:\\ME 578 Systems\\Midterm\\GoldBeam.prt";
igesCreator1.OutputFile = "C:\\Users\\tyguy147\\AppData\\Local\\Temp\\GoldBeam.igs";
theSession.SetUndoMarkName(markId1, "Export to IGES Options Dialog");
igesCreator1.OutputFile = "J:\\ME 578 Systems\\Midterm\\Tests\\GoldBeam.igs";
NXOpen.Session.UndoMarkId markId2;
markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
theSession.DeleteUndoMark(markId2, null);
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
NXOpen.TaggedObject[] objects1 = new NXOpen.TaggedObject[0];
igesCreator1.SetDrawingArray(objects1);
igesCreator1.ViewList = "Top,Front,Right,Back,Bottom,Left,Isometric,Trimetric,User Defined";
NXOpen.NXObject nXObject1;
nXObject1 = igesCreator1.Commit();
theSession.DeleteUndoMark(markId3, null);
theSession.SetUndoMarkName(markId1, "Export to IGES Options");
igesCreator1.Destroy();
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
}