Exemple #1
0
        public SecP384R1FieldElement(BigInteger x)
        {
            if (x == null || x.SignValue < 0 || x.CompareTo(Q) >= 0)
            {
                throw new ArgumentException("value invalid for SecP384R1FieldElement", "x");
            }

            this.x = SecP384R1Field.FromBigInteger(x);
        }
Exemple #2
0
 public override ECFieldElement Multiply(ECFieldElement b)
 {
     uint[] z = Nat.Create(12);
     SecP384R1Field.Multiply(x, ((SecP384R1FieldElement)b).x, z);
     return(new SecP384R1FieldElement(z));
 }
Exemple #3
0
 public override ECFieldElement Subtract(ECFieldElement b)
 {
     uint[] z = Nat.Create(12);
     SecP384R1Field.Subtract(x, ((SecP384R1FieldElement)b).x, z);
     return(new SecP384R1FieldElement(z));
 }
Exemple #4
0
 public override ECFieldElement AddOne()
 {
     uint[] z = Nat.Create(12);
     SecP384R1Field.AddOne(x, z);
     return(new SecP384R1FieldElement(z));
 }
Exemple #5
0
        /**
         * return a sqrt root - the routine verifies that the calculation returns the right value - if
         * none exists it returns null.
         */
        public override ECFieldElement Sqrt()
        {
            // Raise this element to the exponent 2^382 - 2^126 - 2^94 + 2^30

            uint[] x1 = this.x;
            if (Nat.IsZero(12, x1) || Nat.IsOne(12, x1))
            {
                return(this);
            }

            uint[] t1 = Nat.Create(12);
            uint[] t2 = Nat.Create(12);
            uint[] t3 = Nat.Create(12);
            uint[] t4 = Nat.Create(12);

            SecP384R1Field.Square(x1, t1);
            SecP384R1Field.Multiply(t1, x1, t1);

            SecP384R1Field.SquareN(t1, 2, t2);
            SecP384R1Field.Multiply(t2, t1, t2);

            SecP384R1Field.Square(t2, t2);
            SecP384R1Field.Multiply(t2, x1, t2);

            SecP384R1Field.SquareN(t2, 5, t3);
            SecP384R1Field.Multiply(t3, t2, t3);

            SecP384R1Field.SquareN(t3, 5, t4);
            SecP384R1Field.Multiply(t4, t2, t4);

            SecP384R1Field.SquareN(t4, 15, t2);
            SecP384R1Field.Multiply(t2, t4, t2);

            SecP384R1Field.SquareN(t2, 2, t3);
            SecP384R1Field.Multiply(t1, t3, t1);

            SecP384R1Field.SquareN(t3, 28, t3);
            SecP384R1Field.Multiply(t2, t3, t2);

            SecP384R1Field.SquareN(t2, 60, t3);
            SecP384R1Field.Multiply(t3, t2, t3);

            uint[] r = t2;

            SecP384R1Field.SquareN(t3, 120, r);
            SecP384R1Field.Multiply(r, t3, r);

            SecP384R1Field.SquareN(r, 15, r);
            SecP384R1Field.Multiply(r, t4, r);

            SecP384R1Field.SquareN(r, 33, r);
            SecP384R1Field.Multiply(r, t1, r);

            SecP384R1Field.SquareN(r, 64, r);
            SecP384R1Field.Multiply(r, x1, r);

            SecP384R1Field.SquareN(r, 30, t1);
            SecP384R1Field.Square(t1, t2);

            return(Nat.Eq(12, x1, t2) ? new SecP384R1FieldElement(t1) : null);
        }
Exemple #6
0
        public override ECPoint Add(ECPoint b)
        {
            if (this.IsInfinity)
            {
                return(b);
            }
            if (b.IsInfinity)
            {
                return(this);
            }
            if (this == b)
            {
                return(Twice());
            }

            ECCurve curve = this.Curve;

            SecP384R1FieldElement X1 = (SecP384R1FieldElement)this.RawXCoord, Y1 = (SecP384R1FieldElement)this.RawYCoord;
            SecP384R1FieldElement X2 = (SecP384R1FieldElement)b.RawXCoord, Y2 = (SecP384R1FieldElement)b.RawYCoord;

            SecP384R1FieldElement Z1 = (SecP384R1FieldElement)this.RawZCoords[0];
            SecP384R1FieldElement Z2 = (SecP384R1FieldElement)b.RawZCoords[0];

            uint c;

            uint[] tt1 = Nat.Create(24);
            uint[] tt2 = Nat.Create(24);
            uint[] t3  = Nat.Create(12);
            uint[] t4  = Nat.Create(12);

            bool Z1IsOne = Z1.IsOne;

            uint[] U2, S2;
            if (Z1IsOne)
            {
                U2 = X2.x;
                S2 = Y2.x;
            }
            else
            {
                S2 = t3;
                SecP384R1Field.Square(Z1.x, S2);

                U2 = tt2;
                SecP384R1Field.Multiply(S2, X2.x, U2);

                SecP384R1Field.Multiply(S2, Z1.x, S2);
                SecP384R1Field.Multiply(S2, Y2.x, S2);
            }

            bool Z2IsOne = Z2.IsOne;

            uint[] U1, S1;
            if (Z2IsOne)
            {
                U1 = X1.x;
                S1 = Y1.x;
            }
            else
            {
                S1 = t4;
                SecP384R1Field.Square(Z2.x, S1);

                U1 = tt1;
                SecP384R1Field.Multiply(S1, X1.x, U1);

                SecP384R1Field.Multiply(S1, Z2.x, S1);
                SecP384R1Field.Multiply(S1, Y1.x, S1);
            }

            uint[] H = Nat.Create(12);
            SecP384R1Field.Subtract(U1, U2, H);

            uint[] R = Nat.Create(12);
            SecP384R1Field.Subtract(S1, S2, R);

            // Check if b == this or b == -this
            if (Nat.IsZero(12, H))
            {
                if (Nat.IsZero(12, R))
                {
                    // this == b, i.e. this must be doubled
                    return(this.Twice());
                }

                // this == -b, i.e. the result is the point at infinity
                return(curve.Infinity);
            }

            uint[] HSquared = t3;
            SecP384R1Field.Square(H, HSquared);

            uint[] G = Nat.Create(12);
            SecP384R1Field.Multiply(HSquared, H, G);

            uint[] V = t3;
            SecP384R1Field.Multiply(HSquared, U1, V);

            SecP384R1Field.Negate(G, G);
            Nat384.Mul(S1, G, tt1);

            c = Nat.AddBothTo(12, V, V, G);
            SecP384R1Field.Reduce32(c, G);

            SecP384R1FieldElement X3 = new SecP384R1FieldElement(t4);

            SecP384R1Field.Square(R, X3.x);
            SecP384R1Field.Subtract(X3.x, G, X3.x);

            SecP384R1FieldElement Y3 = new SecP384R1FieldElement(G);

            SecP384R1Field.Subtract(V, X3.x, Y3.x);
            Nat384.Mul(Y3.x, R, tt2);
            SecP384R1Field.AddExt(tt1, tt2, tt1);
            SecP384R1Field.Reduce(tt1, Y3.x);

            SecP384R1FieldElement Z3 = new SecP384R1FieldElement(H);

            if (!Z1IsOne)
            {
                SecP384R1Field.Multiply(Z3.x, Z1.x, Z3.x);
            }
            if (!Z2IsOne)
            {
                SecP384R1Field.Multiply(Z3.x, Z2.x, Z3.x);
            }

            ECFieldElement[] zs = new ECFieldElement[] { Z3 };

            return(new SecP384R1Point(curve, X3, Y3, zs, IsCompressed));
        }
Exemple #7
0
        public override ECPoint Twice()
        {
            if (this.IsInfinity)
            {
                return(this);
            }

            ECCurve curve = this.Curve;

            SecP384R1FieldElement Y1 = (SecP384R1FieldElement)this.RawYCoord;

            if (Y1.IsZero)
            {
                return(curve.Infinity);
            }

            SecP384R1FieldElement X1 = (SecP384R1FieldElement)this.RawXCoord, Z1 = (SecP384R1FieldElement)this.RawZCoords[0];

            uint c;

            uint[] t1 = Nat.Create(12);
            uint[] t2 = Nat.Create(12);

            uint[] Y1Squared = Nat.Create(12);
            SecP384R1Field.Square(Y1.x, Y1Squared);

            uint[] T = Nat.Create(12);
            SecP384R1Field.Square(Y1Squared, T);

            bool Z1IsOne = Z1.IsOne;

            uint[] Z1Squared = Z1.x;
            if (!Z1IsOne)
            {
                Z1Squared = t2;
                SecP384R1Field.Square(Z1.x, Z1Squared);
            }

            SecP384R1Field.Subtract(X1.x, Z1Squared, t1);

            uint[] M = t2;
            SecP384R1Field.Add(X1.x, Z1Squared, M);
            SecP384R1Field.Multiply(M, t1, M);
            c = Nat.AddBothTo(12, M, M, M);
            SecP384R1Field.Reduce32(c, M);

            uint[] S = Y1Squared;
            SecP384R1Field.Multiply(Y1Squared, X1.x, S);
            c = Nat.ShiftUpBits(12, S, 2, 0);
            SecP384R1Field.Reduce32(c, S);

            c = Nat.ShiftUpBits(12, T, 3, 0, t1);
            SecP384R1Field.Reduce32(c, t1);

            SecP384R1FieldElement X3 = new SecP384R1FieldElement(T);

            SecP384R1Field.Square(M, X3.x);
            SecP384R1Field.Subtract(X3.x, S, X3.x);
            SecP384R1Field.Subtract(X3.x, S, X3.x);

            SecP384R1FieldElement Y3 = new SecP384R1FieldElement(S);

            SecP384R1Field.Subtract(S, X3.x, Y3.x);
            SecP384R1Field.Multiply(Y3.x, M, Y3.x);
            SecP384R1Field.Subtract(Y3.x, t1, Y3.x);

            SecP384R1FieldElement Z3 = new SecP384R1FieldElement(M);

            SecP384R1Field.Twice(Y1.x, Z3.x);
            if (!Z1IsOne)
            {
                SecP384R1Field.Multiply(Z3.x, Z1.x, Z3.x);
            }

            return(new SecP384R1Point(curve, X3, Y3, new ECFieldElement[] { Z3 }, IsCompressed));
        }