/// <summary>
/// Calculates response of Hartley oscillator with respect to change in varactor reverse bias voltage.
/// </summary>
/// <param name="C_3A">Capacitance that sits ON EITHER SIDE of varactor Cj.</param>
/// <param name="C_3B">Capacitance that sits in parallel with C_3A - Cj - C_3A series combination.</param>
/// <returns></returns>
static XY CalcHartleyVoltageResponse(double C_3A, double C_3B)
{
XY Cj = ImportData.ReadCSVtoXY(ImportData.OutputDataPath);
XY freq = new XY(Cj.x);
XY C3 = new XY(Cj.x);
//This block of variables is necessary for initializing inductance.
//Inductance is initialized to resonate with first-calculated C3 value at 49.5 MHz.
double L1;
double L2;
double omega0 = 2 * Math.PI * 49.5 * Math.Pow(10, 6); //Frequency I want for voltage == 0.0.
double beta = 80.0;
for (int n = 0; n < freq.N; n++)
{
C3.y[n] = C_3B + MenialOperations.Parallel(0.5 * C_3A, Cj.y[n]);
Hartley_CwBtoL(C3.y[0], omega0, beta, out L1, out L2);
freq.y[n] = Math.Pow(C3.y[n] * (L1 + L2), -0.50) / (2.0 * Math.PI);
//Debug.WriteLine("Run " + n + ": " + C3.y[n] + " " + L1 + " " + L2 + " " + freq.y[n]);
}
ExportData.WriteXYtoCSV("C:\\Users\\Mehdy Faik\\Desktop\\Work\\Work\\Side Hustles\\Microwave\\Microwave\\Microwave\\Data\\hartley.csv", freq);
return(freq);
}
public static XY LTSpiceVaractorImport(string path, string pathOut)
{
//String.
string DataHeader = "Step Information:";
string curLine;
//Numerical.
int numRuns = -1;
int curRun = 0;
double MaxGainForRun = Double.MinValue;
double MaxGainFreqForRun = Double.MinValue;
double CurFreq = Double.MinValue;
string CurFreqString = "";
double CurGain = Double.MinValue;
string CurGainString = "";
double[] TestVoltages = new double[1];
double[] ResonantFrequencies = new double[1];
double[] VaractorCapacitances = new double[1];
//Circuit constants.
double L = 2000 * MenialOperations.n;
double C1 = 10 * MenialOperations.p;
double C2 = 10 * MenialOperations.p;
//Open stream to target file.
System.IO.StreamReader fr = new System.IO.StreamReader(path);
while (!fr.EndOfStream)
{
curLine = fr.ReadLine();
//Case 1: Very first occurrence of DataHeader.
if (curLine.Contains(DataHeader) && numRuns == -1)
{
int.TryParse(curLine.Substring(curLine.IndexOf('/') + 1, curLine.IndexOf(')') - curLine.IndexOf('/') - 1), out numRuns);
TestVoltages = new double[numRuns];
TestVoltages[0] = ParseTestParameter(MenialOperations.SubstringProperly(curLine, curLine.IndexOf('=') + 1, curLine.IndexOf('(')).Trim());
ResonantFrequencies = new double[numRuns];
VaractorCapacitances = new double[numRuns];
}
//Case 2: Non-first occurrence of DataHeader.
else if (curLine.Contains(DataHeader))
{
//Store necessary data.
ResonantFrequencies[curRun] = MaxGainFreqForRun;
TestVoltages[curRun + 1] = ParseTestParameter(MenialOperations.SubstringProperly(curLine, curLine.IndexOf('=') + 1, curLine.IndexOf('(')).Trim());
//Reset maxes.
MaxGainForRun = Double.MinValue; //New run -> Recorded max gain from previous run is now obsolete
MaxGainFreqForRun = Double.MinValue;
curRun++; //New run -> new test voltage -> new resonant frequency -> new varactor capacitance.
}
//Case 3: Dealing with number.
else if (curLine.Contains("dB"))
{
//Getting freq.
//Take substring from [0] to ind(e) + 5.
CurFreqString = MenialOperations.SubstringProperly(curLine, 0, curLine.IndexOf('e') + 5);
CurFreq = ParseScientificNotation(CurFreqString);
curLine = curLine.Replace(CurFreqString, ""); //Chop it off.
//Getting gain.
//Take substring from [ind('(') + 1] to ind(e) + 5.
CurGainString = MenialOperations.SubstringProperly(curLine, curLine.IndexOf('(') + 1, curLine.IndexOf('e') + 5);
CurGain = ParseScientificNotation(CurGainString);
if (CurGain > MaxGainForRun)
{
MaxGainFreqForRun = CurFreq;
MaxGainForRun = CurGain;
}
}
}
//Case 4: End of file.
ResonantFrequencies[curRun] = MaxGainFreqForRun;
//Calculate varactor capacitances from resonant frequencies in test circuit.
for (int n = 0; n < ResonantFrequencies.Length; n++)
{
double combinedCaps = MenialOperations.Parallel(C1, C2);
double inductiveResonanceFactor = 1.0 / ((2.0 * Math.PI * ResonantFrequencies[n]) * (2.0 * Math.PI * ResonantFrequencies[n]) * L);
VaractorCapacitances[n] = (combinedCaps * inductiveResonanceFactor) / (combinedCaps - inductiveResonanceFactor);
}
//Now print.
//Debug.WriteLine("Voltage, Resonant Frequency, Capacitance");
//Console.WriteLine("Voltage, Resonant Frequency, Capacitance");
//for (int n = 0; n < ResonantFrequencies.Length; n++)
//{
// Debug.WriteLine(TestVoltages[n] + ", " + ResonantFrequencies[n] + ", " + VaractorCapacitances[n]);
// Console.WriteLine(TestVoltages[n] + ", " + ResonantFrequencies[n] + ", " + VaractorCapacitances[n]);
//}
using (StreamWriter fw = new StreamWriter(pathOut))
{
fw.WriteLine("Voltage, Varactor Capacitance");
for (int n = 0; n < ResonantFrequencies.Length; n++)
{
fw.WriteLine(TestVoltages[n] + ", " + VaractorCapacitances[n]);
}
}
//Return.
XY Cj = new Microwave.XY(TestVoltages, VaractorCapacitances);
return(Cj);
//Find number of runs.
//Allocate this # of resFreq terms.
//Also fill out vector for v.
//For each line in the file:
//If it says "Step Information", get this value for v.
//Get the magnitude value. (dB)
//If it's greater than the previous magnitude value:
//Store it.
//Also store the freq.
//Else, move to the next line.
//For each resFreq term:
//Convert this resFreq to the respective capacitance.
}