private ContentReader GetContentReaderFromXnb(string originalAssetName, ref Stream stream, BinaryReader xnbReader, char platform, Action <IDisposable> recordDisposableObject)
{
byte version = xnbReader.ReadByte();
byte flags = xnbReader.ReadByte();
bool compressed = (flags & 0x80) != 0;
if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
/* Decompress the XNB
* Thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
*/
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
// This will replace the XNB stream at the end
MemoryStream decompressedStream = new MemoryStream(
new byte[decompressedSize],
0,
decompressedSize,
true,
true // This MUST be true! Readers may need GetBuffer()!
);
/* Read in the whole XNB file at once, into a temp buffer.
* For slow disks, the extra malloc is more than worth the
* performance improvement from not constantly fread()ing!
*/
MemoryStream compressedStream = new MemoryStream(
new byte[compressedSize],
0,
compressedSize,
true,
true
);
stream.Read(compressedStream.GetBuffer(), 0, compressedSize);
// Default window size for XNB encoded files is 64Kb (need 16 bits to represent it)
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
long pos = 0;
while (pos < compressedSize)
{
/* The compressed stream is separated into blocks that will
* decompress into 32kB or some other size if specified.
* Normal, 32kB output blocks will have a short indicating
* the size of the block before the block starts. Blocks
* that have a defined output will be preceded by a byte of
* value 0xFF (255), then a short indicating the output size
* and another for the block size. All shorts for these
* cases are encoded in big endian order.
*/
int hi = compressedStream.ReadByte();
int lo = compressedStream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000; // Frame size is 32kB by default
// Does this block define a frame size?
if (hi == 0xFF)
{
hi = lo;
lo = (byte)compressedStream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)compressedStream.ReadByte();
lo = (byte)compressedStream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
// Either says there is nothing to decode
if (block_size == 0 || frame_size == 0)
{
break;
}
dec.Decompress(compressedStream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
/* Reset the position of the input just in case the bit
* buffer read in some unused bytes.
*/
compressedStream.Seek(pos, SeekOrigin.Begin);
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException(
"Decompression of " + originalAssetName + " failed. "
);
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(
this,
decompressedStream,
originalAssetName,
version,
platform,
recordDisposableObject
);
}
else
{
reader = new ContentReader(
this,
stream,
originalAssetName,
version,
platform,
recordDisposableObject
);
}
return(reader);
}
private static Stream PrepareStream(Stream input, string assetName)
{
Stream stream;
try
{
bool flag; //Compressionflag
BinaryReader reader = new BinaryReader(input);
if (((reader.ReadByte() != 0x58) || (reader.ReadByte() != 0x4e)) || (reader.ReadByte() != 0x42)) //First three bytes have to be "XNB"
{
throw new ContentLoadException("Bad XNB Magic");
}
if (reader.ReadByte() != 0x77) //Platform have to be "w" -> stands for windows
{
throw new ContentLoadException("Bad XNB Platform");
}
switch (reader.ReadUInt16()) //Version
{
case 3:
case 4:
flag = false; //Not compressed Stream
break;
case 0x8003:
case 0x8004:
flag = true; //Compressed Stream
break;
default:
throw new ContentLoadException("Bad XNB Version");
}
int num = reader.ReadInt32(); //Number of bytes
if (input.CanSeek && ((num - 10) > (input.Length - input.Position))) //Check if we can read the expected number of bytes
{
throw new ContentLoadException("Bad XNB Size");
}
// is the stream compressed?
if (flag)
{
// ... let's decompress it!
// get the decompressed size (num is our compressed size)
int decompressedSize = reader.ReadInt32();
// create a memory stream of that size
MemoryStream output = new MemoryStream(decompressedSize);
// save our initial position
long pos = input.Position;
// default window size for XNB encoded files is 64Kb (need 16 bits to represent it)
LzxDecoder decoder = new LzxDecoder(16);
// start our decode process
while (pos < num)
{
// the compressed stream is seperated into blocks that will decompress
// into 32Kb or some other size if specified.
// normal, 32Kb output blocks will have a short indicating the size
// of the block before the block starts
// blocks that have a defined output will be preceded by a byte of value
// 0xFF (255), then a short indicating the output size and another
// for the block size
// all shorts for these cases are encoded in big endian order
int hi, lo, block_size, frame_size;
// let's get the first byte
hi = reader.ReadByte();
// does this block define a frame size?
if (hi == 0xFF)
{
// get our bytes
hi = reader.ReadByte();
lo = reader.ReadByte();
// make a beautiful short baby together
frame_size = (hi << 8) | lo;
// let's read the block size
hi = reader.ReadByte();
lo = reader.ReadByte();
block_size = (hi << 8) | lo;
// add the read in bytes to the position
pos += 5;
}
else
{
// just block size, so let's read the rest
lo = reader.ReadByte();
block_size = (hi << 8) | lo;
// frame size is 32Kb by default
frame_size = 32768;
// add the read in bytes to the position
pos += 2;
}
// either says there is nothing to decode
if (block_size == 0 || frame_size == 0)
{
break;
}
// let's decompress the sucker
decoder.Decompress(input, block_size, output, frame_size);
// let's increment the input position by the block size
pos += block_size;
// reset the position of the input just incase the bit buffer
// read in some unused bytes
input.Seek(pos, SeekOrigin.Begin);
}
// finished decoding everything, let's set the decompressed buffer
// to the beginning and return that
output.Seek(0, SeekOrigin.Begin);
stream = output;
}
else // if not, return the input stream untouched
{
stream = input;
}
}
catch (IOException exception)
{
throw new ContentLoadException("Bad XNB", exception);
}
return(stream);
}
private ContentReader GetContentReaderFromXnb(string originalAssetName, ref Stream stream, BinaryReader xnbReader, Action <IDisposable> recordDisposableObject)
{
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte x = xnbReader.ReadByte();
byte n = xnbReader.ReadByte();
byte b = xnbReader.ReadByte();
byte platform = xnbReader.ReadByte();
if (x != 'X' || n != 'N' || b != 'B' ||
!(targetPlatformIdentifiers.Contains((char)platform)))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
byte version = xnbReader.ReadByte();
byte flags = xnbReader.ReadByte();
bool compressedLzx = (flags & ContentCompressedLzx) != 0;
bool compressedLz4 = (flags & ContentCompressedLz4) != 0;
if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressedLzx || compressedLz4)
{
// Decompress the xnb
int decompressedSize = xnbReader.ReadInt32();
MemoryStream decompressedStream = null;
if (compressedLzx)
{
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
// default window size for XNB encoded files is 64Kb (need 16 bits to represent it)
LzxDecoder dec = new LzxDecoder(16);
decompressedStream = new MemoryStream(decompressedSize);
int compressedSize = xnbLength - 14;
long startPos = stream.Position;
long pos = startPos;
while (pos - startPos < compressedSize)
{
// the compressed stream is seperated into blocks that will decompress
// into 32Kb or some other size if specified.
// normal, 32Kb output blocks will have a short indicating the size
// of the block before the block starts
// blocks that have a defined output will be preceded by a byte of value
// 0xFF (255), then a short indicating the output size and another
// for the block size
// all shorts for these cases are encoded in big endian order
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000; // frame size is 32Kb by default
// does this block define a frame size?
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
// either says there is nothing to decode
if (block_size == 0 || frame_size == 0)
{
break;
}
dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
// reset the position of the input just incase the bit buffer
// read in some unused bytes
stream.Seek(pos, SeekOrigin.Begin);
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + " failed. ");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
}
else if (compressedLz4)
{
// Decompress to a byte[] because Windows 8 doesn't support MemoryStream.GetBuffer()
var buffer = new byte[decompressedSize];
using (var decoderStream = new Lz4DecoderStream(stream))
{
if (decoderStream.Read(buffer, 0, buffer.Length) != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + " failed. ");
}
}
// Creating the MemoryStream with a byte[] shares the buffer so it doesn't allocate any more memory
decompressedStream = new MemoryStream(buffer);
}
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice,
originalAssetName, version, recordDisposableObject);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice,
originalAssetName, version, recordDisposableObject);
}
return(reader);
}
private ContentReader GetContentReaderFromXnb(string originalAssetName, ref Stream stream, BinaryReader xnbReader, Action <IDisposable> recordDisposableObject)
{
// The first 4 bytes should be the "XNB" header.
byte x = xnbReader.ReadByte();
byte n = xnbReader.ReadByte();
byte b = xnbReader.ReadByte();
byte platform = xnbReader.ReadByte();
if (x != 'X' || n != 'N' || b != 'B' ||
!(targetPlatformIdentifiers.Contains((char)platform)))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
byte version = xnbReader.ReadByte();
byte flags = xnbReader.ReadByte();
bool compressed = (flags & 0x80) != 0;
if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
/* Decompress the XNB
* Thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
*/
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
// Default window size for XNB encoded files is 64Kb (need 16 bits to represent it)
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
long startPos = stream.Position;
long pos = startPos;
while (pos - startPos < compressedSize)
{
/* The compressed stream is separated into blocks that will
* decompress into 32kB or some other size if specified.
* Normal, 32kB output blocks will have a short indicating
* the size of the block before the block starts. Blocks
* that have a defined output will be preceded by a byte of
* value 0xFF (255), then a short indicating the output size
* and another for the block size. All shorts for these
* cases are encoded in big endian order.
*/
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000; // Frame size is 32kB by default
// Does this block define a frame size?
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
// Either says there is nothing to decode
if (block_size == 0 || frame_size == 0)
{
break;
}
dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
/* Reset the position of the input just in case the bit
* buffer read in some unused bytes.
*/
stream.Seek(pos, SeekOrigin.Begin);
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException(
"Decompression of " + originalAssetName + " failed. "
);
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(
this,
decompressedStream,
this.graphicsDeviceService.GraphicsDevice,
originalAssetName,
version,
recordDisposableObject
);
}
else
{
reader = new ContentReader(
this,
stream,
this.graphicsDeviceService.GraphicsDevice,
originalAssetName,
version,
recordDisposableObject
);
}
return(reader);
}
private ContentReader GetContentReaderFromXnb(string originalAssetName, ref Stream stream, BinaryReader xnbReader, Action <IDisposable> recordDisposableObject)
{
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte x = xnbReader.ReadByte();
byte n = xnbReader.ReadByte();
byte b = xnbReader.ReadByte();
byte platform = xnbReader.ReadByte();
if (x != 'X' || n != 'N' || b != 'B' ||
!(targetPlatformIdentifiers.Contains((char)platform)))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
byte version = xnbReader.ReadByte();
byte flags = xnbReader.ReadByte();
bool compressed = (flags & 0x80) != 0;
if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
//decompress the xnb
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
// default window size for XNB encoded files is 64Kb (need 16 bits to represent it)
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
long startPos = stream.Position;
long pos = startPos;
#if ANDROID
// Android native stream does not support the Position property. LzxDecoder.Decompress also uses
// Seek. So we read the entirity of the stream into a memory stream and replace stream with the
// memory stream.
MemoryStream memStream = new MemoryStream();
stream.CopyTo(memStream);
memStream.Seek(0, SeekOrigin.Begin);
stream.Dispose();
stream = memStream;
// Position is at the start of the MemoryStream as Stream.CopyTo copies from current position
pos = 0;
#endif
while (pos - startPos < compressedSize)
{
// the compressed stream is seperated into blocks that will decompress
// into 32Kb or some other size if specified.
// normal, 32Kb output blocks will have a short indicating the size
// of the block before the block starts
// blocks that have a defined output will be preceded by a byte of value
// 0xFF (255), then a short indicating the output size and another
// for the block size
// all shorts for these cases are encoded in big endian order
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000; // frame size is 32Kb by default
// does this block define a frame size?
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
// either says there is nothing to decode
if (block_size == 0 || frame_size == 0)
{
break;
}
dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
// reset the position of the input just incase the bit buffer
// read in some unused bytes
stream.Seek(pos, SeekOrigin.Begin);
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + " failed. ");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice,
originalAssetName, version, recordDisposableObject);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice,
originalAssetName, version, recordDisposableObject);
}
return(reader);
}
private uint ReadHuffSym(ushort[] table, byte[] lengths, uint nsyms, uint nbits, LzxDecoder.BitBuffer bitbuf)
{
bitbuf.EnsureBits((byte) 16);
uint num1;
if ((num1 = (uint) table[(IntPtr) bitbuf.PeekBits((byte) nbits)]) >= nsyms)
{
uint num2 = (uint) (1 << 32 - (int) nbits);
uint num3;
do
{
num2 >>= 1;
num3 = num1 << 1 | (((int) bitbuf.GetBuffer() & (int) num2) != 0 ? 1U : 0U);
if ((int) num2 == 0)
return 0U;
}
while ((num1 = (uint) table[(IntPtr) num3]) >= nsyms);
}
uint num4 = (uint) lengths[(IntPtr) num1];
bitbuf.RemoveBits((byte) num4);
return num1;
}
private ContentReader GetContentReaderFromXnb(string originalAssetName, ref Stream stream, BinaryReader xnbReader, Action <IDisposable> recordDisposableObject)
{
byte num1 = xnbReader.ReadByte();
byte num2 = xnbReader.ReadByte();
byte num3 = xnbReader.ReadByte();
byte num4 = xnbReader.ReadByte();
if ((int)num1 != 88 || (int)num2 != 78 || (int)num3 != 66 || (int)num4 != 119 && (int)num4 != 120 && (int)num4 != 109)
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
byte num5 = xnbReader.ReadByte();
bool flag = ((int)xnbReader.ReadByte() & 128) != 0;
if ((int)num5 != 5 && (int)num5 != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
int num6 = xnbReader.ReadInt32();
ContentReader contentReader;
if (flag)
{
int num7 = num6 - 14;
int capacity = xnbReader.ReadInt32();
MemoryStream memoryStream = new MemoryStream(capacity);
LzxDecoder lzxDecoder = new LzxDecoder(16);
int num8 = 0;
long position = stream.Position;
long offset = position;
while (offset - position < (long)num7)
{
int num9 = stream.ReadByte();
int num10 = stream.ReadByte();
int inLen = num9 << 8 | num10;
int outLen = 32768;
long num11;
if (num9 == (int)byte.MaxValue)
{
outLen = num10 << 8 | (int)(byte)stream.ReadByte();
inLen = (int)(byte)stream.ReadByte() << 8 | (int)(byte)stream.ReadByte();
num11 = offset + 5L;
}
else
{
num11 = offset + 2L;
}
if (inLen != 0 && outLen != 0)
{
lzxDecoder.Decompress(stream, inLen, (Stream)memoryStream, outLen);
offset = num11 + (long)inLen;
num8 += outLen;
stream.Seek(offset, SeekOrigin.Begin);
}
else
{
break;
}
}
if (memoryStream.Position != (long)capacity)
{
throw new ContentLoadException("Decompression of " + originalAssetName + " failed. ");
}
memoryStream.Seek(0L, SeekOrigin.Begin);
contentReader = new ContentReader(this, (Stream)memoryStream, this.graphicsDeviceService.GraphicsDevice, originalAssetName, (int)num5, recordDisposableObject);
}
else
{
contentReader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice, originalAssetName, (int)num5, recordDisposableObject);
}
return(contentReader);
}
private void ReadLengths(byte[] lens, uint first, uint last, LzxDecoder.BitBuffer bitbuf)
{
for (uint index = 0U; index < 20U; ++index)
{
uint num = bitbuf.ReadBits((byte) 4);
this.m_state.PRETREE_len[(IntPtr) index] = (byte) num;
}
this.MakeDecodeTable(20U, 6U, this.m_state.PRETREE_len, this.m_state.PRETREE_table);
uint num1 = first;
while (num1 < last)
{
int num2 = (int) this.ReadHuffSym(this.m_state.PRETREE_table, this.m_state.PRETREE_len, 20U, 6U, bitbuf);
switch (num2)
{
case 17:
uint num3 = bitbuf.ReadBits((byte) 4) + 4U;
while ((int) num3-- != 0)
lens[(IntPtr) num1++] = (byte) 0;
continue;
case 18:
uint num4 = bitbuf.ReadBits((byte) 5) + 20U;
while ((int) num4-- != 0)
lens[(IntPtr) num1++] = (byte) 0;
continue;
case 19:
uint num5 = bitbuf.ReadBits((byte) 1) + 4U;
int num6 = (int) this.ReadHuffSym(this.m_state.PRETREE_table, this.m_state.PRETREE_len, 20U, 6U, bitbuf);
int num7 = (int) lens[(IntPtr) num1] - num6;
if (num7 < 0)
num7 += 17;
while ((int) num5-- != 0)
lens[(IntPtr) num1++] = (byte) num7;
continue;
default:
int num8 = (int) lens[(IntPtr) num1] - num2;
if (num8 < 0)
num8 += 17;
lens[(IntPtr) num1++] = (byte) num8;
continue;
}
}
}
protected T ReadAsset <T>(string assetName, Action <IDisposable> recordDisposableObject)
{
if (string.IsNullOrEmpty(assetName))
{
throw new ArgumentNullException();
}
if (disposed)
{
throw new ObjectDisposedException("ContentManager");
}
string originalAssetName = assetName;
object result = null;
if (this.graphicsDeviceService == null)
{
this.graphicsDeviceService = serviceProvider.GetService(typeof(IGraphicsDeviceService)) as IGraphicsDeviceService;
if (this.graphicsDeviceService == null)
{
throw new InvalidOperationException("No Graphics Device Service");
}
}
// Replace Windows path separators with local path separators
assetName = Path.Combine(_rootDirectory, assetName.Replace('\\', Path.DirectorySeparatorChar));
// Get the real file name
if ((typeof(T) == typeof(Texture2D)))
{
assetName = Texture2DReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(SpriteFont)))
{
assetName = SpriteFontReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(Effect)))
{
assetName = Effect.Normalize(assetName);
}
else if ((typeof(T) == typeof(Song)))
{
assetName = SongReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(SoundEffect)))
{
assetName = SoundEffectReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(Video)))
{
assetName = Video.Normalize(assetName);
}
else
{
throw new NotSupportedException("Format not supported");
}
if (string.IsNullOrEmpty(assetName))
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
if (!Path.HasExtension(assetName))
{
assetName = string.Format("{0}.xnb", assetName);
}
if (Path.GetExtension(assetName).ToUpper() == ".XNB")
{
// Load a XNB file
//Loads from Assets directory + /assetName
Stream stream = OpenStream(assetName);
BinaryReader xnbReader = new BinaryReader(stream);
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte[] headerBuffer = new byte[3];
xnbReader.Read(headerBuffer, 0, 3);
string headerString = Encoding.UTF8.GetString(headerBuffer, 0, 3);
byte platform = xnbReader.ReadByte();
if (string.Compare(headerString, "XNB") != 0 ||
!(platform == 'w' || platform == 'x' || platform == 'm'))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
ushort version = xnbReader.ReadUInt16();
int graphicsProfile = version & 0x7f00;
version &= 0x80ff;
bool compressed = false;
if (version == 0x8005 || version == 0x8004)
{
compressed = true;
}
else if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
//decompress the xnb
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
int newFileSize = decompressedSize + 10;
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
int pos = 0;
while (pos < compressedSize)
{
// let's seek to the correct position
stream.Seek(pos + 14, SeekOrigin.Begin);
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000;
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
if (block_size == 0 || frame_size == 0)
{
break;
}
int lzxRet = dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + "failed. " +
" Try decompressing with nativeDecompressXnb first.");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice);
}
ContentTypeReaderManager typeManager = new ContentTypeReaderManager(reader);
reader.TypeReaders = typeManager.LoadAssetReaders(reader);
foreach (ContentTypeReader r in reader.TypeReaders)
{
r.Initialize(typeManager);
}
// we need to read a byte here for things to work out, not sure why
reader.ReadByte();
// Get the 1-based index of the typereader we should use to start decoding with
int index = reader.ReadByte();
ContentTypeReader contentReader = reader.TypeReaders[index - 1];
result = reader.ReadObject <T>(contentReader);
reader.Close();
stream.Close();
}
else
{
if ((typeof(T) == typeof(Texture2D)))
{
//Basically the same as Texture2D.FromFile but loading from the assets instead of a filePath
Stream assetStream = OpenStream(assetName);
Bitmap image = BitmapFactory.DecodeStream(assetStream);
ESImage theTexture = new ESImage(image, graphicsDeviceService.GraphicsDevice.PreferedFilter);
result = new Texture2D(theTexture)
{
Name = Path.GetFileNameWithoutExtension(assetName)
};
}
if ((typeof(T) == typeof(SpriteFont)))
{
//result = new SpriteFont(Texture2D.FromFile(graphicsDeviceService.GraphicsDevice,assetName), null, null, null, 0, 0.0f, null, null);
throw new NotImplementedException();
}
if ((typeof(T) == typeof(Song)))
{
result = new Song(assetName);
}
if ((typeof(T) == typeof(SoundEffect)))
{
result = new SoundEffect(assetName);
}
if ((typeof(T) == typeof(Video)))
{
result = new Video(assetName);
}
}
/*else
* {
* // Load a XNB file
* //Loads from Assets directory + /assetName
* Stream assetStream = OpenStream(assetName);
*
* ContentReader reader = new ContentReader(this, assetStream, this.graphicsDeviceService.GraphicsDevice);
* ContentTypeReaderManager typeManager = new ContentTypeReaderManager(reader);
* reader.TypeReaders = typeManager.LoadAssetReaders(reader);
* foreach (ContentTypeReader r in reader.TypeReaders)
* {
* r.Initialize(typeManager);
* }
* // we need to read a byte here for things to work out, not sure why
* reader.ReadByte();
*
* // Get the 1-based index of the typereader we should use to start decoding with
* int index = reader.ReadByte();
* ContentTypeReader contentReader = reader.TypeReaders[index - 1];
* result = reader.ReadObject<T>(contentReader);
*
* reader.Close();
* assetStream.Close();
* }*/
if (result == null)
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
// Store references to the asset for later use
T asset = (T)result;
if (asset is IDisposable && recordDisposableObject != null)
{
recordDisposableObject(asset as IDisposable);
}
else
{
disposableAssets.Add(asset as IDisposable);
}
loadedAssets.Add(originalAssetName, asset);
return((T)result);
}
public T Load <T>(string assetName)
{
string originalAssetName = assetName;
object result = null;
if (this.graphicsDeviceService == null)
{
this.graphicsDeviceService = serviceProvider.GetService(typeof(IGraphicsDeviceService)) as IGraphicsDeviceService;
if (this.graphicsDeviceService == null)
{
throw new InvalidOperationException("No Graphics Device Service");
}
}
if (string.IsNullOrEmpty(assetName))
{
throw new ArgumentException("assetname");
}
if (!string.IsNullOrEmpty(_rootDirectory))
{
assetName = _rootDirectory + Path.DirectorySeparatorChar + assetName;
}
// Check for windows-style directory separator character
assetName = assetName.Replace('\\', Path.DirectorySeparatorChar);
// Get the real file name
if ((typeof(T) == typeof(Texture2D)))
{
assetName = Texture2DReader.Normalize(assetName);
}
if ((typeof(T) == typeof(SpriteFont)))
{
assetName = SpriteFontReader.Normalize(assetName);
}
if ((typeof(T) == typeof(Song)))
{
assetName = SongReader.Normalize(assetName);
}
if ((typeof(T) == typeof(SoundEffect)))
{
assetName = SoundEffectReader.Normalize(assetName);
}
if ((typeof(T) == typeof(Video)))
{
assetName = Video.Normalize(assetName);
}
if ((typeof(T) == typeof(Effect)))
{
assetName = Effect.Normalize(assetName);
}
if (string.IsNullOrEmpty(assetName))
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
if (!Path.HasExtension(assetName))
{
assetName = string.Format("{0}.xnb", assetName);
}
if (Path.GetExtension(assetName).ToUpper() == ".XNB")
{
// Load a XNB file
FileStream stream = new FileStream(assetName, FileMode.Open, FileAccess.Read, FileShare.Read);
BinaryReader xnbReader = new BinaryReader(stream);
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte[] headerBuffer = new byte[3];
xnbReader.Read(headerBuffer, 0, 3);
string headerString = Encoding.UTF8.GetString(headerBuffer, 0, 3);
byte platform = xnbReader.ReadByte();
if (string.Compare(headerString, "XNB") != 0 ||
!(platform == 'w' || platform == 'x' || platform == 'm'))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
ushort version = xnbReader.ReadUInt16();
int graphicsProfile = version & 0x7f00;
version &= 0x80ff;
bool compressed = false;
if (version == 0x8005 || version == 0x8004)
{
compressed = true;
}
else if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
//decompress the xnb
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
int newFileSize = decompressedSize + 10;
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
int pos = 0;
while (pos < compressedSize)
{
// let's seek to the correct position
stream.Seek(pos + 14, SeekOrigin.Begin);
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000;
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
if (block_size == 0 || frame_size == 0)
{
break;
}
int lzxRet = dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + "failed. " +
" Try decompressing with nativeDecompressXnb first.");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice);
}
ContentTypeReaderManager typeManager = new ContentTypeReaderManager(reader);
reader.TypeReaders = typeManager.LoadAssetReaders(reader);
foreach (ContentTypeReader r in reader.TypeReaders)
{
r.Initialize(typeManager);
}
// we need to read a byte here for things to work out, not sure why
reader.ReadByte();
// Get the 1-based index of the typereader we should use to start decoding with
int index = reader.ReadByte();
ContentTypeReader contentReader = reader.TypeReaders[index - 1];
result = reader.ReadObject <T>(contentReader);
reader.Close();
stream.Close();
}
else
{
if ((typeof(T) == typeof(Texture2D)))
{
result = Texture2D.FromFile(graphicsDeviceService.GraphicsDevice, assetName);
}
if ((typeof(T) == typeof(SpriteFont)))
{
//result = new SpriteFont(Texture2D.FromFile(graphicsDeviceService.GraphicsDevice,assetName), null, null, null, 0, 0.0f, null, null);
throw new NotImplementedException();
}
if ((typeof(T) == typeof(Song)))
{
result = new Song(assetName);
}
if ((typeof(T) == typeof(SoundEffect)))
{
result = new SoundEffect(assetName);
}
if ((typeof(T) == typeof(Video)))
{
result = new Video(assetName);
}
if ((typeof(T) == typeof(Effect)))
{
result = new Effect(graphicsDeviceService.GraphicsDevice, assetName);
}
}
if (result == null)
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
return((T)result);
}
protected T ReadAsset <T>(string assetName, Action <IDisposable> recordDisposableObject, int lod = 0)
{
if (string.IsNullOrEmpty(assetName))
{
throw new ArgumentNullException("assetName");
}
if (disposed)
{
throw new ObjectDisposedException("ContentManager");
}
//GC.GetTotalMemory(true);
//Process currentProcess = System.Diagnostics.Process.GetCurrentProcess();
//long memstart = currentProcess.WorkingSet64;
string originalAssetName = assetName;
object result = null;
if (this.graphicsDeviceService == null)
{
this.graphicsDeviceService = serviceProvider.GetService(typeof(IGraphicsDeviceService)) as IGraphicsDeviceService;
if (this.graphicsDeviceService == null)
{
throw new InvalidOperationException("No Graphics Device Service");
}
}
// Replace Windows path separators with local path separators
assetName = GetRealFilename <T>(assetName);
if (string.IsNullOrEmpty(assetName))
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
if (!Path.HasExtension(assetName))
{
assetName = string.Format("{0}.xnb", assetName);
}
if (Path.GetExtension(assetName).ToLower() == ".xnb")
{
// Load a XNB file
using (Stream stream = OpenStream(assetName))
{
using (BinaryReader xnbReader = new BinaryReader(stream))
{
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte[] headerBuffer = new byte[3];
xnbReader.Read(headerBuffer, 0, 3);
string headerString = Encoding.UTF8.GetString(headerBuffer, 0, 3);
byte platform = xnbReader.ReadByte();
if (string.Compare(headerString, "XNB") != 0 ||
!(platform == 'w' || platform == 'x' || platform == 'm'))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
ushort version = xnbReader.ReadUInt16();
int graphicsProfile = version & 0x7f00;
version &= 0x80ff;
bool compressed = false;
if (version == 0x8005 || version == 0x8004)
{
compressed = true;
}
else if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
//decompress the xnb
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
int newFileSize = decompressedSize + 10;
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
LzxDecoder dec = new LzxDecoder(16);
int decodedBytes = 0;
int pos = 0;
while (pos < compressedSize)
{
// let's seek to the correct position
stream.Seek(pos + 14, SeekOrigin.Begin);
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000;
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
{
pos += 2;
}
if (block_size == 0 || frame_size == 0)
{
break;
}
int lzxRet = dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + "failed. " +
" Try decompressing with nativeDecompressXnb first.");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice);
}
using (reader)
{
ContentTypeReaderManager typeManager = new ContentTypeReaderManager(reader);
reader.TypeReaders = typeManager.LoadAssetReaders(reader);
foreach (ContentTypeReader r in reader.TypeReaders)
{
r.Initialize(typeManager);
}
// we need to read a byte here for things to work out, not sure why
reader.ReadByte();
// Get the 1-based index of the typereader we should use to start decoding with
int index = reader.ReadByte();
ContentTypeReader contentReader = reader.TypeReaders[index - 1];
result = reader.ReadObject <T>(contentReader);
}
}
}
}
else
{
if ((typeof(T) == typeof(Texture2D)))
{
using (Stream assetStream = OpenStream(assetName))
{
Texture2D texture = Texture2D.FromFile(graphicsDeviceService.GraphicsDevice, assetStream, lod);
texture.Name = originalAssetName;
result = texture;
}
}
else if ((typeof(T) == typeof(SpriteFont)))
{
//result = new SpriteFont(Texture2D.FromFile(graphicsDeviceService.GraphicsDevice,assetName), null, null, null, 0, 0.0f, null, null);
throw new NotImplementedException();
}
else if ((typeof(T) == typeof(Song)))
{
result = new Song(assetName);
}
else if ((typeof(T) == typeof(SoundEffect)))
{
result = new SoundEffect(assetName);
}
else if ((typeof(T) == typeof(Video)))
{
result = new Video(assetName);
}
else if ((typeof(T) == typeof(Effect)))
{
result = new Effect(graphicsDeviceService.GraphicsDevice, assetName);
}
}
if (result == null)
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
// Store references to the asset for later use
T asset = (T)result;
if (asset is IDisposable)
{
if (recordDisposableObject != null)
{
recordDisposableObject(asset as IDisposable);
}
else
{
disposableAssets.Add(asset as IDisposable);
}
}
loadedAssets.Add(originalAssetName, asset);
//GC.GetTotalMemory(true);
//var memend = currentProcess.WorkingSet64;
//Console.WriteLine("mem: " + assetName + ", " + (memend -memstart).ToString());
return((T)result);
}
protected T ReadAsset<T>(string assetName, Action<IDisposable> recordDisposableObject)
{
if (string.IsNullOrEmpty(assetName))
{
throw new ArgumentNullException("assetName");
}
if (disposed)
{
throw new ObjectDisposedException("ContentManager");
}
string originalAssetName = assetName;
object result = null;
if (this.graphicsDeviceService == null)
{
this.graphicsDeviceService = serviceProvider.GetService(typeof(IGraphicsDeviceService)) as IGraphicsDeviceService;
if (this.graphicsDeviceService == null)
{
throw new InvalidOperationException("No Graphics Device Service");
}
}
// Replace Windows path separators with local path separators
assetName = GetFilename(assetName);
// Get the real file name
if ((typeof(T) == typeof(Curve)))
{
assetName = CurveReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(Texture2D)))
{
assetName = Texture2DReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(SpriteFont)))
{
assetName = SpriteFontReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(Effect)))
{
assetName = Effect.Normalize(assetName);
}
else if ((typeof(T) == typeof(Song)))
{
assetName = SongReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(SoundEffect)))
{
assetName = SoundEffectReader.Normalize(assetName);
}
else if ((typeof(T) == typeof(Video)))
{
assetName = Video.Normalize(assetName);
}
if (string.IsNullOrEmpty(assetName))
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
if (!Path.HasExtension(assetName))
assetName = string.Format("{0}.xnb", assetName);
if (Path.GetExtension(assetName).ToLower() == ".xnb")
{
// Load a XNB file
Stream stream = OpenStream(assetName);
try
{
using (BinaryReader xnbReader = new BinaryReader(stream))
{
// The first 4 bytes should be the "XNB" header. i use that to detect an invalid file
byte x = xnbReader.ReadByte();
byte n = xnbReader.ReadByte();
byte b = xnbReader.ReadByte();
byte platform = xnbReader.ReadByte();
if (x != 'X' || n != 'N' || b != 'B' ||
!(platform == 'w' || platform == 'x' || platform == 'm'))
{
throw new ContentLoadException("Asset does not appear to be a valid XNB file. Did you process your content for Windows?");
}
byte version = xnbReader.ReadByte();
byte flags = xnbReader.ReadByte();
bool compressed = (flags & 0x80) != 0;
if (version != 5 && version != 4)
{
throw new ContentLoadException("Invalid XNB version");
}
// The next int32 is the length of the XNB file
int xnbLength = xnbReader.ReadInt32();
ContentReader reader;
if (compressed)
{
LzxDecoder dec = new LzxDecoder(16);
//decompress the xnb
//thanks to ShinAli (https://bitbucket.org/alisci01/xnbdecompressor)
int compressedSize = xnbLength - 14;
int decompressedSize = xnbReader.ReadInt32();
int newFileSize = decompressedSize + 10;
MemoryStream decompressedStream = new MemoryStream(decompressedSize);
int decodedBytes = 0;
int pos = 0;
#if ANDROID
// Android native stream does not support the Position property. LzxDecoder.Decompress also uses
// Seek. So we read the entirity of the stream into a memory stream and replace stream with the
// memory stream.
MemoryStream memStream = new MemoryStream();
stream.CopyTo(memStream);
memStream.Seek(0, SeekOrigin.Begin);
stream.Dispose();
stream = memStream;
pos = -14;
#endif
while (pos < compressedSize)
{
// let's seek to the correct position
// The stream should already be in the correct position, and seeking can be slow
stream.Seek(pos + 14, SeekOrigin.Begin);
int hi = stream.ReadByte();
int lo = stream.ReadByte();
int block_size = (hi << 8) | lo;
int frame_size = 0x8000;
if (hi == 0xFF)
{
hi = lo;
lo = (byte)stream.ReadByte();
frame_size = (hi << 8) | lo;
hi = (byte)stream.ReadByte();
lo = (byte)stream.ReadByte();
block_size = (hi << 8) | lo;
pos += 5;
}
else
pos += 2;
if (block_size == 0 || frame_size == 0)
break;
int lzxRet = dec.Decompress(stream, block_size, decompressedStream, frame_size);
pos += block_size;
decodedBytes += frame_size;
}
if (decompressedStream.Position != decompressedSize)
{
throw new ContentLoadException("Decompression of " + originalAssetName + "failed. " +
" Try decompressing with nativeDecompressXnb first.");
}
decompressedStream.Seek(0, SeekOrigin.Begin);
reader = new ContentReader(this, decompressedStream, this.graphicsDeviceService.GraphicsDevice, originalAssetName);
}
else
{
reader = new ContentReader(this, stream, this.graphicsDeviceService.GraphicsDevice, originalAssetName);
}
using (reader)
{
result = reader.ReadAsset<T>();
}
}
}
finally
{
if (stream != null)
{
stream.Dispose();
}
}
}
else
{
if ((typeof(T) == typeof(Texture2D)))
{
#if IPHONE
Texture2D texture = Texture2D.FromFile(graphicsDeviceService.GraphicsDevice, assetName);
texture.Name = originalAssetName;
result = texture;
#else
using (Stream assetStream = OpenStream(assetName))
{
Texture2D texture = Texture2D.FromFile(graphicsDeviceService.GraphicsDevice, assetStream);
texture.Name = originalAssetName;
result = texture;
}
#endif
}
else if ((typeof(T) == typeof(SpriteFont)))
{
//result = new SpriteFont(Texture2D.FromFile(graphicsDeviceService.GraphicsDevice,assetName), null, null, null, 0, 0.0f, null, null);
throw new NotImplementedException();
}
else if ((typeof(T) == typeof(Song)))
{
result = new Song(assetName);
}
else if ((typeof(T) == typeof(SoundEffect)))
{
result = new SoundEffect(assetName);
}
else if ((typeof(T) == typeof(Video)))
{
result = new Video(assetName);
}
else if ((typeof(T) == typeof(Effect)))
{
result = new Effect(graphicsDeviceService.GraphicsDevice, assetName);
}
}
if (result == null)
{
throw new ContentLoadException("Could not load " + originalAssetName + " asset!");
}
if ( recordDisposableObject != null && result is IDisposable )
recordDisposableObject(result as IDisposable);
return (T)result;
}