/// <summary>
/// Initializes a new instance of the ComposeDeploymentUpgradeProgressInfo class.
/// </summary>
/// <param name="deploymentName">The name of the target deployment.</param>
/// <param name="applicationName">The name of the target application, including the 'fabric:' URI scheme.</param>
/// <param name="upgradeState">The state of the compose deployment upgrade.
/// . Possible values include: 'Invalid', 'ProvisioningTarget', 'RollingForwardInProgress', 'RollingForwardPending',
/// 'UnprovisioningCurrent', 'RollingForwardCompleted', 'RollingBackInProgress', 'UnprovisioningTarget',
/// 'RollingBackCompleted', 'Failed'</param>
/// <param name="upgradeStatusDetails">Additional detailed information about the status of the pending upgrade.</param>
/// <param name="upgradeKind">The kind of upgrade out of the following possible values. Possible values include:
/// 'Invalid', 'Rolling'</param>
/// <param name="rollingUpgradeMode">The mode used to monitor health during a rolling upgrade. The values are
/// UnmonitoredAuto, UnmonitoredManual, and Monitored. Possible values include: 'Invalid', 'UnmonitoredAuto',
/// 'UnmonitoredManual', 'Monitored'</param>
/// <param name="forceRestart">If true, then processes are forcefully restarted during upgrade even when the code
/// version has not changed (the upgrade only changes configuration or data).</param>
/// <param name="upgradeReplicaSetCheckTimeoutInSeconds">The maximum amount of time to block processing of an upgrade
/// domain and prevent loss of availability when there are unexpected issues. When this timeout expires, processing of
/// the upgrade domain will proceed regardless of availability loss issues. The timeout is reset at the start of each
/// upgrade domain. Valid values are between 0 and 42949672925 inclusive. (unsigned 32-bit integer).</param>
/// <param name="monitoringPolicy">Describes the parameters for monitoring an upgrade in Monitored mode.</param>
/// <param name="applicationHealthPolicy">Defines a health policy used to evaluate the health of an application or one
/// of its children entities.
/// </param>
/// <param name="targetApplicationTypeVersion">The target application type version (found in the application manifest)
/// for the application upgrade.</param>
/// <param name="upgradeDuration">The estimated amount of time that the overall upgrade elapsed. It is first
/// interpreted as a string representing an ISO 8601 duration. If that fails, then it is interpreted as a number
/// representing the total number of milliseconds.</param>
/// <param name="currentUpgradeDomainDuration">The estimated amount of time spent processing current Upgrade Domain. It
/// is first interpreted as a string representing an ISO 8601 duration. If that fails, then it is interpreted as a
/// number representing the total number of milliseconds.</param>
/// <param name="applicationUnhealthyEvaluations">List of health evaluations that resulted in the current aggregated
/// health state.</param>
/// <param name="currentUpgradeDomainProgress">Information about the current in-progress upgrade domain.</param>
/// <param name="startTimestampUtc">The estimated UTC datetime when the upgrade started.</param>
/// <param name="failureTimestampUtc">The estimated UTC datetime when the upgrade failed and FailureAction was
/// executed.</param>
/// <param name="failureReason">The cause of an upgrade failure that resulted in FailureAction being executed. Possible
/// values include: 'None', 'Interrupted', 'HealthCheck', 'UpgradeDomainTimeout', 'OverallUpgradeTimeout'</param>
/// <param name="upgradeDomainProgressAtFailure">Information about the upgrade domain progress at the time of upgrade
/// failure.</param>
/// <param name="applicationUpgradeStatusDetails">Additional details of application upgrade including failure
/// message.</param>
public ComposeDeploymentUpgradeProgressInfo(
string deploymentName = default(string),
string applicationName = default(string),
ComposeDeploymentUpgradeState?upgradeState = default(ComposeDeploymentUpgradeState?),
string upgradeStatusDetails = default(string),
UpgradeKind?upgradeKind = Common.UpgradeKind.Rolling,
UpgradeMode?rollingUpgradeMode = Common.UpgradeMode.UnmonitoredAuto,
bool?forceRestart = default(bool?),
long?upgradeReplicaSetCheckTimeoutInSeconds = default(long?),
MonitoringPolicyDescription monitoringPolicy = default(MonitoringPolicyDescription),
ApplicationHealthPolicy applicationHealthPolicy = default(ApplicationHealthPolicy),
string targetApplicationTypeVersion = default(string),
string upgradeDuration = default(string),
string currentUpgradeDomainDuration = default(string),
IEnumerable <HealthEvaluationWrapper> applicationUnhealthyEvaluations = default(IEnumerable <HealthEvaluationWrapper>),
CurrentUpgradeDomainProgressInfo currentUpgradeDomainProgress = default(CurrentUpgradeDomainProgressInfo),
string startTimestampUtc = default(string),
string failureTimestampUtc = default(string),
FailureReason?failureReason = default(FailureReason?),
FailureUpgradeDomainProgressInfo upgradeDomainProgressAtFailure = default(FailureUpgradeDomainProgressInfo),
string applicationUpgradeStatusDetails = default(string))
{
this.DeploymentName = deploymentName;
this.ApplicationName = applicationName;
this.UpgradeState = upgradeState;
this.UpgradeStatusDetails = upgradeStatusDetails;
this.UpgradeKind = upgradeKind;
this.RollingUpgradeMode = rollingUpgradeMode;
this.ForceRestart = forceRestart;
this.UpgradeReplicaSetCheckTimeoutInSeconds = upgradeReplicaSetCheckTimeoutInSeconds;
this.MonitoringPolicy = monitoringPolicy;
this.ApplicationHealthPolicy = applicationHealthPolicy;
this.TargetApplicationTypeVersion = targetApplicationTypeVersion;
this.UpgradeDuration = upgradeDuration;
this.CurrentUpgradeDomainDuration = currentUpgradeDomainDuration;
this.ApplicationUnhealthyEvaluations = applicationUnhealthyEvaluations;
this.CurrentUpgradeDomainProgress = currentUpgradeDomainProgress;
this.StartTimestampUtc = startTimestampUtc;
this.FailureTimestampUtc = failureTimestampUtc;
this.FailureReason = failureReason;
this.UpgradeDomainProgressAtFailure = upgradeDomainProgressAtFailure;
this.ApplicationUpgradeStatusDetails = applicationUpgradeStatusDetails;
}
/// <summary>
/// Initializes a new instance of the ApplicationUpgradeProgressInfo class.
/// </summary>
/// <param name="name">The name of the target application, including the 'fabric:' URI scheme.</param>
/// <param name="typeName">The application type name as defined in the application manifest.</param>
/// <param name="targetApplicationTypeVersion">The target application type version (found in the application manifest)
/// for the application upgrade.</param>
/// <param name="upgradeDomains">List of upgrade domains and their statuses. Not applicable to node-by-node
/// upgrades.</param>
/// <param name="upgradeUnits">List of upgrade units and their statuses.</param>
/// <param name="upgradeState">The state of the upgrade domain. Possible values include: 'Invalid',
/// 'RollingBackInProgress', 'RollingBackCompleted', 'RollingForwardPending', 'RollingForwardInProgress',
/// 'RollingForwardCompleted', 'Failed'</param>
/// <param name="nextUpgradeDomain">The name of the next upgrade domain to be processed. Not applicable to node-by-node
/// upgrades.</param>
/// <param name="rollingUpgradeMode">The mode used to monitor health during a rolling upgrade. The values are
/// UnmonitoredAuto, UnmonitoredManual, Monitored, and UnmonitoredDeferred. Possible values include: 'Invalid',
/// 'UnmonitoredAuto', 'UnmonitoredManual', 'Monitored', 'UnmonitoredDeferred'</param>
/// <param name="upgradeDescription">Describes the parameters for an application upgrade. Note that upgrade description
/// replaces the existing application description. This means that if the parameters are not specified, the existing
/// parameters on the applications will be overwritten with the empty parameters list. This would result in the
/// application using the default value of the parameters from the application manifest. If you do not want to change
/// any existing parameter values, please get the application parameters first using the GetApplicationInfo query and
/// then supply those values as Parameters in this ApplicationUpgradeDescription.</param>
/// <param name="upgradeDurationInMilliseconds">The estimated total amount of time spent processing the overall
/// upgrade.</param>
/// <param name="upgradeDomainDurationInMilliseconds">The estimated total amount of time spent processing the current
/// upgrade domain.</param>
/// <param name="unhealthyEvaluations">List of health evaluations that resulted in the current aggregated health
/// state.</param>
/// <param name="currentUpgradeDomainProgress">Information about the current in-progress upgrade domain. Not applicable
/// to node-by-node upgrades.</param>
/// <param name="currentUpgradeUnitsProgress">Information about the current in-progress upgrade units.</param>
/// <param name="startTimestampUtc">The estimated UTC datetime when the upgrade started.</param>
/// <param name="failureTimestampUtc">The estimated UTC datetime when the upgrade failed and FailureAction was
/// executed.</param>
/// <param name="failureReason">The cause of an upgrade failure that resulted in FailureAction being executed. Possible
/// values include: 'None', 'Interrupted', 'HealthCheck', 'UpgradeDomainTimeout', 'OverallUpgradeTimeout'</param>
/// <param name="upgradeDomainProgressAtFailure">Information about the upgrade domain progress at the time of upgrade
/// failure.</param>
/// <param name="upgradeStatusDetails">Additional detailed information about the status of the pending upgrade.</param>
/// <param name="isNodeByNode">Indicates whether this upgrade is node-by-node.</param>
public ApplicationUpgradeProgressInfo(
string name = default(string),
string typeName = default(string),
string targetApplicationTypeVersion = default(string),
IEnumerable <UpgradeDomainInfo> upgradeDomains = default(IEnumerable <UpgradeDomainInfo>),
IEnumerable <UpgradeUnitInfo> upgradeUnits = default(IEnumerable <UpgradeUnitInfo>),
UpgradeState?upgradeState = default(UpgradeState?),
string nextUpgradeDomain = default(string),
UpgradeMode?rollingUpgradeMode = Common.UpgradeMode.UnmonitoredAuto,
ApplicationUpgradeDescription upgradeDescription = default(ApplicationUpgradeDescription),
string upgradeDurationInMilliseconds = default(string),
string upgradeDomainDurationInMilliseconds = default(string),
IEnumerable <HealthEvaluationWrapper> unhealthyEvaluations = default(IEnumerable <HealthEvaluationWrapper>),
CurrentUpgradeDomainProgressInfo currentUpgradeDomainProgress = default(CurrentUpgradeDomainProgressInfo),
CurrentUpgradeUnitsProgressInfo currentUpgradeUnitsProgress = default(CurrentUpgradeUnitsProgressInfo),
string startTimestampUtc = default(string),
string failureTimestampUtc = default(string),
FailureReason?failureReason = default(FailureReason?),
FailureUpgradeDomainProgressInfo upgradeDomainProgressAtFailure = default(FailureUpgradeDomainProgressInfo),
string upgradeStatusDetails = default(string),
bool?isNodeByNode = false)
{
this.Name = name;
this.TypeName = typeName;
this.TargetApplicationTypeVersion = targetApplicationTypeVersion;
this.UpgradeDomains = upgradeDomains;
this.UpgradeUnits = upgradeUnits;
this.UpgradeState = upgradeState;
this.NextUpgradeDomain = nextUpgradeDomain;
this.RollingUpgradeMode = rollingUpgradeMode;
this.UpgradeDescription = upgradeDescription;
this.UpgradeDurationInMilliseconds = upgradeDurationInMilliseconds;
this.UpgradeDomainDurationInMilliseconds = upgradeDomainDurationInMilliseconds;
this.UnhealthyEvaluations = unhealthyEvaluations;
this.CurrentUpgradeDomainProgress = currentUpgradeDomainProgress;
this.CurrentUpgradeUnitsProgress = currentUpgradeUnitsProgress;
this.StartTimestampUtc = startTimestampUtc;
this.FailureTimestampUtc = failureTimestampUtc;
this.FailureReason = failureReason;
this.UpgradeDomainProgressAtFailure = upgradeDomainProgressAtFailure;
this.UpgradeStatusDetails = upgradeStatusDetails;
this.IsNodeByNode = isNodeByNode;
}
