internal RBNode <ScanSegment> FindLowestIntersectorNode(Point start, Point end)
{
Debug.Assert(ScanDirection.IsPerpendicular(start, end), "non-perpendicular segment passed");
// Find the last segment that starts at or before 'start'.
this.lookupSegment.Update(start, start);
RBNode <ScanSegment> node = this.segmentTree.FindLast(this.findIntersectorPred);
// We have a segment that intersects start/end, or one that ends before 'start' and thus we
// must iterate to find the lowest bisector. TODOperf: see how much that iteration costs us
// (here and Highest); consider a BSP tree or interval tree (maybe 2-d RBTree for updatability).
if (PointComparer.Equal(start, end))
{
if ((null != node) && (ScanDirection.Compare(node.Item.End, start) < 0))
{
node = null;
}
}
else
{
this.lookupSegment.Update(start, end);
while ((null != node) && !node.Item.IntersectsSegment(this.lookupSegment))
{
// If the node segment starts after 'end', no intersection was found.
if (ScanDirection.Compare(node.Item.Start, end) > 0)
{
return(null);
}
node = this.segmentTree.Next(node);
}
}
return(node);
}
// Find the highest perpendicular scanseg that intersects the segment endpoints.
internal ScanSegment FindHighestIntersector(Point start, Point end)
{
Debug.Assert(ScanDirection.IsPerpendicular(start, end), "non-perpendicular segment passed");
// Find the last segment that starts at or before 'end'.
this.lookupSegment.Update(end, end);
RBNode <ScanSegment> node = this.segmentTree.FindLast(this.findIntersectorPred);
// Now we either have a segment that intersects start/end, or one that ends before
// 'end' and need to iterate to find the highest bisector.
if (PointComparer.Equal(start, end))
{
if ((null != node) && (ScanDirection.Compare(node.Item.End, start) < 0))
{
node = null;
}
}
else
{
this.lookupSegment.Update(start, end);
while ((null != node) && !node.Item.IntersectsSegment(this.lookupSegment))
{
// If the node segment ends before 'start', no intersection was found.
if (ScanDirection.Compare(node.Item.End, start) < 0)
{
return(null);
}
node = this.segmentTree.Previous(node);
}
}
return((null != node) ? node.Item : null);
}
// Append a vertex before LowestVisibilityVertex or after HighestVisibilityVertex.
internal void AppendVisibilityVertex(VisibilityGraph vg, VisibilityVertex newVertex)
{
Debug.Assert(null != newVertex, "newVertex must not be null");
Debug.Assert((null == LowestVisibilityVertex) == (null == HighestVisibilityVertex), "Mismatched null Lowest/HighestVisibilityVertex");
Debug.Assert(StaticGraphUtility.PointIsOnSegment(this, newVertex.Point), "newVertex is out of segment range");
if (null == HighestVisibilityVertex)
{
if (!AddGroupCrossingsBeforeHighestVisibilityVertex(vg, newVertex))
{
SetInitialVisibilityVertex(newVertex);
}
}
else
{
// In the event of overlaps where ScanSegments share a Start/End at a border, SegmentIntersector
// may be appending the same Vertex twice. If that point is on the border of a group,
// then we may have just added the border-crossing edge as well.
if (PointComparer.IsPureLower(newVertex.Point, HighestVisibilityVertex.Point))
{
Debug.Assert(null != vg.FindEdge(newVertex.Point, HighestVisibilityVertex.Point)
, "unexpected low/middle insertion to ScanSegment");
return;
}
// Add the new edge. This will always be in the ascending direction.
if (!AddGroupCrossingsBeforeHighestVisibilityVertex(vg, newVertex))
{
AppendHighestVisibilityVertex(newVertex);
}
}
}
/// <summary>
/// For ordering V segments in the scanline by X.
/// </summary>
/// <param name="first"></param>
/// <param name="second"></param>
/// <returns></returns>
public int Compare(ScanSegment first, ScanSegment second)
{
if (first == second)
{
return(0);
}
if (first == null)
{
return(-1);
}
if (second == null)
{
return(1);
}
// Note: Unlike the ScanSegment-generating scanline, this scanline has no slope
// calculations so no additional rounding error is introduced.
int cmp = PointComparer.Compare(first.Start.X, second.Start.X);
// Separate segments may join at Start and End due to overlap, so compare the Y positions;
// the Close (lowest Y) comes before the Open.
if (0 == cmp)
{
cmp = PointComparer.Compare(first.Start.Y, second.Start.Y);
}
return(cmp);
}
private static VisibilityVertex GetSpliceTarget(ref VisibilityVertex spliceSource, Directions spliceTargetDir, Point nextExtendPoint)
{
// Look for the target. There may be a dead-ended edge starting at the current spliceSource
// edge that has a vertex closer to the extension line; in that case keep walking until we
// have the closest vertex on the Source side of the extension line as spliceSource.
Directions prevDir = PointComparer.GetPureDirection(spliceSource.Point, nextExtendPoint);
Directions nextDir = prevDir;
var spliceTarget = spliceSource;
while (nextDir == prevDir)
{
spliceSource = spliceTarget;
spliceTarget = StaticGraphUtility.FindNextVertex(spliceSource, spliceTargetDir);
if (null == spliceTarget)
{
break;
}
if (PointComparer.Equal(spliceTarget.Point, nextExtendPoint))
{
// If we encountered an existing vertex for the extension chain, update spliceTarget
// to be after it and we're done with this loop.
spliceTarget = StaticGraphUtility.FindNextVertex(spliceTarget, spliceTargetDir);
break;
}
nextDir = PointComparer.GetPureDirection(spliceTarget.Point, nextExtendPoint);
}
return(spliceTarget);
}
internal VisibilityEdge FindPerpendicularOrContainingEdge(VisibilityVertex startVertex
, Directions dir, Point pointLocation)
{
// Return the edge in 'dir' from startVertex that is perpendicular to pointLocation.
// startVertex must therefore be located such that pointLocation is in 'dir' direction from it,
// or is on the same line.
StaticGraphUtility.Assert(0 == (CompassVector.OppositeDir(dir)
& PointComparer.GetDirections(startVertex.Point, pointLocation))
, "the ray from 'dir' is away from pointLocation", ObstacleTree, VisGraph);
while (true)
{
VisibilityVertex nextVertex = StaticGraphUtility.FindNextVertex(startVertex, dir);
if (null == nextVertex)
{
break;
}
Directions dirCheck = PointComparer.GetDirections(nextVertex.Point, pointLocation);
// If the next vertex is past the intersection with pointLocation, this edge brackets it.
if (0 != (CompassVector.OppositeDir(dir) & dirCheck))
{
return(VisGraph.FindEdge(startVertex.Point, nextVertex.Point));
}
startVertex = nextVertex;
}
return(null);
}
internal void ConnectVertexToTargetVertex(VisibilityVertex sourceVertex, VisibilityVertex targetVertex, Directions finalEdgeDir, double weight)
{
// finalDir is the required direction of the final edge to the targetIntersect
// (there will be two edges if we have to add a bend vertex).
StaticGraphUtility.Assert(PointComparer.IsPureDirection(finalEdgeDir), "finalEdgeDir is not pure", ObstacleTree, VisGraph);
// targetIntersect may be CenterVertex if that is on an extreme bend or a flat border.
if (PointComparer.Equal(sourceVertex.Point, targetVertex.Point))
{
return;
}
// If the target is collinear with sourceVertex we can just create one edge to it.
Directions targetDirs = PointComparer.GetDirections(sourceVertex.Point, targetVertex.Point);
if (PointComparer.IsPureDirection(targetDirs))
{
FindOrAddEdge(sourceVertex, targetVertex);
return;
}
// Not collinear so we need to create a bend vertex and edge if they don't yet exist.
Point bendPoint = StaticGraphUtility.FindBendPointBetween(sourceVertex.Point, targetVertex.Point, finalEdgeDir);
VisibilityVertex bendVertex = FindOrAddVertex(bendPoint);
FindOrAddEdge(sourceVertex, bendVertex, weight);
// Now create the outer target vertex if it doesn't exist.
FindOrAddEdge(bendVertex, targetVertex, weight);
}
void DevTrace_VerifyVertex(VisibilityVertex vertex)
{
if (transGraphVerify.IsLevel(1))
{
Directions dir = Directions.North;
for (int idir = 0; idir < 4; ++idir, dir = CompassVector.RotateRight(dir))
{
int count = 0;
int cEdges = vertex.InEdges.Count; // indexing is faster than foreach for Lists
for (int ii = 0; ii < cEdges; ++ii)
{
var edge = vertex.InEdges[ii];
if (PointComparer.GetPureDirection(vertex.Point, edge.SourcePoint) == dir)
{
++count;
}
}
// Avoid GetEnumerator overhead.
var outEdgeNode = vertex.OutEdges.IsEmpty() ? null : vertex.OutEdges.TreeMinimum();
for (; outEdgeNode != null; outEdgeNode = vertex.OutEdges.Next(outEdgeNode))
{
var edge = outEdgeNode.Item;
if (PointComparer.GetPureDirection(vertex.Point, edge.TargetPoint) == dir)
{
++count;
}
}
Debug.Assert(count < 2, "vertex has multiple edges in one direction");
}
}
}
internal static bool FindBracketingVertices(VisibilityVertex sourceVertex, Point targetPoint, Directions dirToTarget
, out VisibilityVertex bracketSource, out VisibilityVertex bracketTarget)
{
// Walk from the source to target until we bracket target or there is no nextVertex
// in the desired direction.
bracketSource = sourceVertex;
for (; ;)
{
bracketTarget = StaticGraphUtility.FindNextVertex(bracketSource, dirToTarget);
if (null == bracketTarget)
{
break;
}
if (PointComparer.Equal(bracketTarget.Point, targetPoint))
{
// Desired edge already exists.
return(true);
}
if (dirToTarget != PointComparer.GetPureDirection(bracketTarget.Point, targetPoint))
{
// bracketTarget is past vertex in the traversal direction.
break;
}
bracketSource = bracketTarget;
}
return(null != bracketTarget);
}
static internal Point RawIntersection(IntersectionInfo xx, Point origin)
{
// If this fires, then you didn't pass the LineSegment as the first argument to GetAllIntersections.
Debug.Assert(xx.Segment0 is LineSegment, "LineSegment was not first arg to GetAllIntersections");
// The intersection snaps the end of the intersection to the PolylinePoint at the start/end
// of the interesecting segment on the obstacle if the intersection is Curve.CloseIntersections
// to that segment endpoint, which can return a point that is just more than Curve.DistanceEpsilon
// off the line. Therefore, re-create the intersection using the LineSegment and intersection
// parameters (this assumes the LineSegment.End is not Curve.CloseIntersections to the intersection).
Point point = xx.Segment0[xx.Par0];
#if TEST_MSAGL
// This may legitimately be rounding-error'd in the same way as xx.IntersectionPoint (and the
// caller addresses this later). The purpose of the assert is to verify that the LineSegment
// interception is not outside the bbox in the perpendicular direction.
var lineSeg = (LineSegment)xx.Segment0;
if (StaticGraphUtility.IsVertical(PointComparer.GetDirections(lineSeg.Start, lineSeg.End)))
{
Debug.Assert(PointComparer.Equal(point.X, origin.X), "segment0 obstacle intersection is off the vertical line");
}
else
{
Debug.Assert(PointComparer.Equal(point.Y, origin.Y), "segment0 obstacle intersection is off the horizontal line");
}
#endif // TEST_MSAGL
return(ApproximateComparer.Round(point));
}
/// <summary>
/// Move along the linked list until we hit the ScanSegment that contains the point.
/// </summary>
internal bool TraverseToSegmentContainingPoint(Point point)
{
// This is not a simple Next() because scan segments are extended "through" obstacles
// (intermixing overlapped and non-overlapped) and thus a ScanSegment's Start and End
// may not be in the vertexPoints collection and the ScanSegment must be skipped.
if (this.CurrentSegment.ContainsPoint(point))
{
return(true);
}
var pointCoord = this.IsHorizontal ? point.Y : point.X;
if (!PointComparer.Equal(this.Coord, pointCoord))
{
Debug.Assert(PointComparer.Compare(this.Coord, pointCoord) == -1, "point is before current Coord");
while (this.MoveNext())
{
// Skip to the end of the linked list if this point is not on the same coordinate.
}
return(false);
}
for (;;)
{
// In the event of mismatched rounding on horizontal versus vertical intersections
// with a sloped obstacle side, we may have a point that is just before or just
// after the current segment. If the point is in some space that doesn't have a
// scansegment, and if we are "close enough" to one end or the other of a scansegment,
// then grow the scansegment enough to include the new point.
if ((null == this.CurrentSegment.NextSegment) ||
PointComparer.GetDirections(this.CurrentSegment.End, point)
== PointComparer.GetDirections(point, this.CurrentSegment.NextSegment.Start))
{
if (ApproximateComparer.CloseIntersections(this.CurrentSegment.End, point))
{
this.CurrentSegment.Update(this.CurrentSegment.Start, point);
return(true);
}
}
if (!this.MoveNext())
{
return(false);
}
if (this.CurrentSegment.ContainsPoint(point))
{
return(true);
}
// This is likely the reverse of the above; the point rounding mismatched to just before
// rather than just after the current segment.
if (PointComparer.IsPureLower(point, this.CurrentSegment.Start))
{
Debug.Assert(ApproximateComparer.CloseIntersections(this.CurrentSegment.Start, point), "Skipped over the point in the ScanSegment linked list");
this.CurrentSegment.Update(point, this.CurrentSegment.End);
return(true);
}
}
}
private void LookForCloserNonGroupIntersectionToRestrictRay(IList <IntersectionInfo> intersections)
{
int numberOfGoodIntersections = 0;
IntersectionInfo closestIntersectionInfo = null;
var localLeastDistSquared = this.restrictedRayLengthSquared;
var testDirection = PointComparer.GetDirections(restrictedIntersectionTestSegment.Start, restrictedIntersectionTestSegment.End);
foreach (var intersectionInfo in intersections)
{
var intersect = SpliceUtility.RawIntersection(intersectionInfo, currentRestrictedRay.Start);
var dirToIntersect = PointComparer.GetDirections(currentRestrictedRay.Start, intersect);
if (dirToIntersect == CompassVector.OppositeDir(testDirection))
{
continue;
}
++numberOfGoodIntersections;
if (Directions.None == dirToIntersect)
{
localLeastDistSquared = 0.0;
closestIntersectionInfo = intersectionInfo;
continue;
}
var distSquared = (intersect - currentRestrictedRay.Start).LengthSquared;
if (distSquared < localLeastDistSquared)
{
// Rounding may falsely report two intersections as different when they are actually "Close",
// e.g. a horizontal vs. vertical intersection on a slanted edge.
var rawDistSquared = (intersectionInfo.IntersectionPoint - currentRestrictedRay.Start).LengthSquared;
if (rawDistSquared < ApproximateComparer.SquareOfDistanceEpsilon)
{
continue;
}
localLeastDistSquared = distSquared;
closestIntersectionInfo = intersectionInfo;
}
}
if (null != closestIntersectionInfo)
{
// If there was only one intersection and it is quite close to an end, ignore it.
// If there is more than one intersection, we have crossed the obstacle so we want it.
if (numberOfGoodIntersections == 1)
{
var intersect = SpliceUtility.RawIntersection(closestIntersectionInfo, currentRestrictedRay.Start);
if (ApproximateComparer.CloseIntersections(intersect, this.currentRestrictedRay.Start) ||
ApproximateComparer.CloseIntersections(intersect, this.currentRestrictedRay.End))
{
return;
}
}
this.restrictedRayLengthSquared = localLeastDistSquared;
currentRestrictedRay.End = SpliceUtility.MungeClosestIntersectionInfo(currentRestrictedRay.Start, closestIntersectionInfo
, !StaticGraphUtility.IsVertical(currentRestrictedRay.Start, currentRestrictedRay.End));
}
}
internal void MergeFrom(PointAndCrossingsList other)
{
Reset();
if ((null == other) || (0 == other.ListOfPointsAndCrossings.Count))
{
return;
}
if (0 == this.ListOfPointsAndCrossings.Count)
{
this.ListOfPointsAndCrossings.AddRange(other.ListOfPointsAndCrossings);
}
if (null == this.ListOfPointsAndCrossings)
{
this.ListOfPointsAndCrossings = new List <PointAndCrossings>(other.ListOfPointsAndCrossings);
return;
}
// Do the usual sorted-list merge.
int thisIndex = 0, thisMax = this.ListOfPointsAndCrossings.Count;
int otherIndex = 0, otherMax = other.ListOfPointsAndCrossings.Count;
var newCrossingsList = new List <PointAndCrossings>(this.ListOfPointsAndCrossings.Count);
while ((thisIndex < thisMax) || (otherIndex < otherMax))
{
if (thisIndex >= thisMax)
{
newCrossingsList.Add(other.ListOfPointsAndCrossings[otherIndex++]);
continue;
}
if (otherIndex >= otherMax)
{
newCrossingsList.Add(this.ListOfPointsAndCrossings[thisIndex++]);
continue;
}
PointAndCrossings thisPac = this.ListOfPointsAndCrossings[thisIndex];
PointAndCrossings otherPac = other.ListOfPointsAndCrossings[otherIndex];
int cmp = PointComparer.Compare(thisPac.Location, otherPac.Location);
if (0 == cmp)
{
// No duplicates
newCrossingsList.Add(thisPac);
++thisIndex;
++otherIndex;
}
else if (-1 == cmp)
{
newCrossingsList.Add(thisPac);
++thisIndex;
}
else
{
newCrossingsList.Add(otherPac);
++otherIndex;
}
}
this.ListOfPointsAndCrossings = newCrossingsList;
}
HitTestBehavior InsideObstacleHitTest(Point location, Obstacle obstacle)
{
if ((obstacle == insideHitTestIgnoreObstacle1) || (obstacle == insideHitTestIgnoreObstacle2))
{
// It's one of the two obstacles we already know about.
return(HitTestBehavior.Continue);
}
if (obstacle.IsGroup)
{
// Groups are handled differently from overlaps; we create ScanSegments (overlapped
// if within a non-group obstacle, else non-overlapped), and turn on/off access across
// the Group boundary vertices.
return(HitTestBehavior.Continue);
}
if (!StaticGraphUtility.PointIsInRectangleInterior(location, obstacle.VisibilityBoundingBox))
{
// The point is on the obstacle boundary, not inside it.
return(HitTestBehavior.Continue);
}
// Note: There are rounding issues using Curve.PointRelativeToCurveLocation at angled
// obstacle boundaries, hence this function.
Point high = StaticGraphUtility.RectangleBorderIntersect(obstacle.VisibilityBoundingBox, location
, insideHitTestScanDirection.Direction)
+ insideHitTestScanDirection.DirectionAsPoint;
Point low = StaticGraphUtility.RectangleBorderIntersect(obstacle.VisibilityBoundingBox, location
, insideHitTestScanDirection.OppositeDirection)
- insideHitTestScanDirection.DirectionAsPoint;
var testSeg = new LineSegment(low, high);
IList <IntersectionInfo> xxs = Curve.GetAllIntersections(testSeg, obstacle.VisibilityPolyline, true /*liftIntersections*/);
// If this is an extreme point it can have one intersection, in which case we're either on the border
// or outside; if it's a collinear flat boundary, there can be 3 intersections to this point which again
// means we're on the border (and 3 shouldn't happen anymore with the curve intersection fixes and
// PointIsInsideRectangle check above). So the interesting case is that we have 2 intersections.
if (2 == xxs.Count)
{
Point firstInt = SpliceUtility.RawIntersection(xxs[0], location);
Point secondInt = SpliceUtility.RawIntersection(xxs[1], location);
// If we're on either intersection, we're on the border rather than inside.
if (!PointComparer.Equal(location, firstInt) && !PointComparer.Equal(location, secondInt) &&
(location.CompareTo(firstInt) != location.CompareTo(secondInt)))
{
// We're inside. However, this may be an almost-flat side, in which case rounding
// could have reported the intersection with the start or end of the same side and
// a point somewhere on the interior of that side. Therefore if both intersections
// are on the same side (integral portion of the parameter), we consider location
// to be on the border. testSeg is always xxs[*].Segment0.
Debug.Assert(testSeg == xxs[0].Segment0, "incorrect parameter ordering to GetAllIntersections");
if (!ApproximateComparer.Close(Math.Floor(xxs[0].Par1), Math.Floor(xxs[1].Par1)))
{
return(HitTestBehavior.Stop);
}
}
}
return(HitTestBehavior.Continue);
}
static internal VisibilityVertex FindNextVertex(VisibilityVertex vertex, Directions dir)
{
// This function finds the next vertex in the desired direction relative to the
// current vertex, not necessarily the edge orientation, hence it does not use
// EdgeDirection(). This is so the caller can operate on a desired movement
// direction without having to track whether we're going forward or backward
// through the In/OutEdge chain.
int cEdges = vertex.InEdges.Count; // indexing is faster than foreach for Lists
for (int ii = 0; ii < cEdges; ++ii)
{
var edge = vertex.InEdges[ii];
if (PointComparer.GetPureDirection(vertex.Point, edge.SourcePoint) == dir)
{
return(edge.Source);
}
}
// Avoid GetEnumerator overhead.
var outEdgeNode = vertex.OutEdges.IsEmpty() ? null : vertex.OutEdges.TreeMinimum();
for (; outEdgeNode != null; outEdgeNode = vertex.OutEdges.Next(outEdgeNode))
{
var edge = outEdgeNode.Item;
if (PointComparer.GetPureDirection(vertex.Point, edge.TargetPoint) == dir)
{
return(edge.Target);
}
}
return(null);
}
static internal Point SegmentIntersection(Point first, Point second, Point from)
{
Directions dir = PointComparer.GetPureDirection(first, second);
Point intersect = IsVertical(dir) ? new Point(first.X, from.Y) : new Point(from.X, first.Y);
return(intersect);
}
static internal bool RectangleInteriorsIntersect(Rectangle a, Rectangle b)
{
return((PointComparer.Compare(a.Bottom, b.Top) < 0) &&
(PointComparer.Compare(b.Bottom, a.Top) < 0) &&
(PointComparer.Compare(a.Left, b.Right) < 0) &&
(PointComparer.Compare(b.Left, a.Right) < 0));
}
static internal bool PointIsInRectangleInterior(Point point, Rectangle rect)
{
return((PointComparer.Compare(point.Y, rect.Top) < 0) &&
(PointComparer.Compare(rect.Bottom, point.Y) < 0) &&
(PointComparer.Compare(point.X, rect.Right) < 0) &&
(PointComparer.Compare(rect.Left, point.X) < 0));
}
internal bool ContainsPoint(Point test)
{
// This may be off the line so do not use GetPureDirections.
return(PointComparer.Equal(this.Start, test) ||
PointComparer.Equal(this.End, test) ||
(PointComparer.GetDirections(this.Start, test) == PointComparer.GetDirections(test, this.End)));
}
static internal Tuple <Point, Point> SortAscending(Point a, Point b)
{
Directions dir = PointComparer.GetDirections(a, b);
Debug.Assert((Directions.None == dir) || PointComparer.IsPureDirection(dir), "SortAscending with impure direction");
return(((Directions.None == dir) || IsAscending(dir)) ? new Tuple <Point, Point>(a, b) : new Tuple <Point, Point>(b, a));
}
internal PointAndCrossingsList GetOrderedListBetween(Point start, Point end)
{
if (0 == pointCrossingMap.Count)
{
return(null);
}
if (PointComparer.Compare(start, end) > 0)
{
Point temp = start;
start = end;
end = temp;
}
// Start and end are inclusive.
pointList.Clear();
foreach (var intersection in pointCrossingMap.Keys)
{
if ((PointComparer.Compare(intersection, start) >= 0) && (PointComparer.Compare(intersection, end) <= 0))
{
pointList.Add(intersection);
}
}
pointList.Sort();
var pointAndCrossingList = new PointAndCrossingsList();
var numCrossings = pointList.Count;
for (int ii = 0; ii < numCrossings; ++ii)
{
Point intersect = pointList[ii];
pointAndCrossingList.Add(intersect, pointCrossingMap[intersect]);
}
return(pointAndCrossingList);
}
void ScanIntersect(ScanSegment hSeg)
{
// Find the VSeg in the scanline with the lowest X-intersection with HSeg, then iterate
// all VSegs in the scan line after that until we leave the HSeg range.
// We only use FindFirstHSeg in this routine, to find the first satisfying node,
// so we don't care that we leave leftovers in it.
findFirstHSeg = hSeg;
RBNode <ScanSegment> segNode = verticalSegmentsScanLine.FindFirst(findFirstPred);
for (; null != segNode; segNode = verticalSegmentsScanLine.Next(segNode))
{
ScanSegment vSeg = segNode.Item;
if (1 == PointComparer.Compare(vSeg.Start.X, hSeg.End.X))
{
break; // Out of HSeg range
}
VisibilityVertex newVertex = visGraph.AddVertex(new Point(vSeg.Start.X, hSeg.Start.Y));
// HSeg has just opened so if we are overlapped and newVertex already existed,
// it was because we just closed a previous HSeg or VSeg and are now opening one
// whose Start is the same as previous. So we may be appending a vertex that
// is already the *Seg.HighestVisibilityVertex, which will be a no-op. Otherwise
// this will add a (possibly Overlapped)VisibilityEdge in the *Seg direction.
hSeg.AppendVisibilityVertex(visGraph, newVertex);
vSeg.AppendVisibilityVertex(visGraph, newVertex);
} // endforeach scanline VSeg in range
OnSegmentClose(hSeg);
}
private void AddGroupIntersectionsToRestrictedRay(Obstacle obstacle, IList <IntersectionInfo> intersections)
{
// We'll let the lines punch through any intersections with groups, but track the location so we can enable/disable crossing.
foreach (var intersectionInfo in intersections)
{
var intersect = SpliceUtility.RawIntersection(intersectionInfo, currentRestrictedRay.Start);
// Skip intersections that are past the end of the restricted segment (though there may still be some
// there if we shorten it later, but we'll skip them later).
var distSquared = (intersect - currentRestrictedRay.Start).LengthSquared;
if (distSquared > restrictedRayLengthSquared)
{
continue;
}
var dirTowardIntersect = PointComparer.GetPureDirection(currentRestrictedRay.Start, currentRestrictedRay.End);
var polyline = (Polyline)intersectionInfo.Segment1; // this is the second arg to GetAllIntersections
var dirsOfSide = CompassVector.VectorDirection(polyline.Derivative(intersectionInfo.Par1));
// The derivative is always clockwise, so if the side contains the rightward rotation of the
// direction from the ray origin, then we're hitting it from the inside; otherwise from the outside.
var dirToInsideOfGroup = dirTowardIntersect;
if (0 != (dirsOfSide & CompassVector.RotateRight(dirTowardIntersect)))
{
dirToInsideOfGroup = CompassVector.OppositeDir(dirToInsideOfGroup);
}
CurrentGroupBoundaryCrossingMap.AddIntersection(intersect, obstacle, dirToInsideOfGroup);
}
}
internal bool SegmentCrossesANonGroupObstacle(Point startPoint, Point endPoint)
{
stopAtGroups = false;
wantGroupCrossings = false;
LineSegment obstacleIntersectSeg = RestrictSegmentPrivate(startPoint, endPoint);
return(!PointComparer.Equal(obstacleIntersectSeg.End, endPoint));
}
// ctor
internal void Update(Point start, Point end)
{
Debug.Assert(PointComparer.Equal(start, end) ||
StaticGraphUtility.IsAscending(PointComparer.GetPureDirection(start, end))
, "non-ascending segment");
startPoint = start;
endPoint = end;
}
internal bool CurrentIsBeforeOrAt(Point comparand)
{
if (index >= ListOfPointsAndCrossings.Count)
{
return(false);
}
return(PointComparer.Compare(ListOfPointsAndCrossings[index].Location, comparand) <= 0);
}
private void AppendHighestVisibilityVertex(VisibilityVertex newVertex)
{
if (!PointComparer.Equal(HighestVisibilityVertex.Point, newVertex.Point))
{
AddVisibilityEdge(HighestVisibilityVertex, newVertex);
HighestVisibilityVertex = newVertex;
}
}
static internal bool PointIsOnSegmentInterior(Point first, Point second, Point test)
{
Directions firstDir = PointComparer.GetDirections(first, test);
Directions secondDir = PointComparer.GetDirections(test, second);
Debug.Assert((Directions.None != firstDir) || (Directions.None != secondDir), "zero-length segment");
return(firstDir == secondDir);
}
internal void OnSegmentIntersectorEnd(VisibilityGraph vg)
{
AppendGroupCrossingsThroughPoint(vg, End);
GroupBoundaryPointAndCrossingsList = null;
if ((null == HighestVisibilityVertex) || (PointComparer.IsPureLower(HighestVisibilityVertex.Point, End)))
{
LoadEndOverlapVertexIfNeeded(vg);
}
}
internal void AddOobEdgesFromGraphCorner(TransientGraphUtility transUtil, Point cornerPoint)
{
Directions dirs = PointComparer.GetDirections(cornerPoint, Vertex.Point);
VisibilityVertex cornerVertex = transUtil.VisGraph.FindVertex(cornerPoint);
// For waypoints we want to be able to enter in both directions.
transUtil.ConnectVertexToTargetVertex(cornerVertex, this.Vertex, dirs & (Directions.North | Directions.South), ScanSegment.NormalWeight);
transUtil.ConnectVertexToTargetVertex(cornerVertex, this.Vertex, dirs & (Directions.East | Directions.West), ScanSegment.NormalWeight);
}
