private void StartDebugging(LaunchOptions launchOptions)
{
Debug.Assert(_engineCallback != null);
Debug.Assert(_pollThread == null);
Debug.Assert(_debuggedProcess == null);
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread(Logger);
var cancellationTokenSource = new CancellationTokenSource();
using (cancellationTokenSource)
{
_pollThread.RunOperation(ResourceStrings.InitializingDebugger, cancellationTokenSource, (HostWaitLoop waitLoop) =>
{
try
{
_debuggedProcess = new DebuggedProcess(true, launchOptions, _engineCallback, _pollThread, _breakpointManager, this, _configStore, waitLoop);
}
finally
{
// If there is an exception from the DebuggeedProcess constructor, it is our responsibility to dispose the DeviceAppLauncher,
// otherwise the DebuggedProcess object takes ownership.
if (_debuggedProcess == null && launchOptions.DeviceAppLauncher != null)
{
launchOptions.DeviceAppLauncher.Dispose();
}
}
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
return(_debuggedProcess.Initialize(waitLoop, cancellationTokenSource.Token));
});
}
}
// Attach the debug engine to a program.
int IDebugEngine2.Attach(IDebugProgram2[] rgpPrograms, IDebugProgramNode2[] rgpProgramNodes, uint celtPrograms, IDebugEventCallback2 ad7Callback, enum_ATTACH_REASON dwReason)
{
Debug.Assert(_ad7ProgramId == Guid.Empty);
if (celtPrograms != 1)
{
Debug.Fail("SampleEngine only expects to see one program in a process");
throw new ArgumentException();
}
try
{
AD_PROCESS_ID processId = EngineUtils.GetProcessId(rgpPrograms[0]);
EngineUtils.RequireOk(rgpPrograms[0].GetProgramId(out _ad7ProgramId));
// Attach can either be called to attach to a new process, or to complete an attach
// to a launched process
if (_pollThread == null)
{
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread();
_engineCallback = new EngineCallback(this, ad7Callback);
// Complete the win32 attach on the poll thread
_pollThread.RunOperation(new Operation(delegate
{
throw new NotImplementedException();
}));
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
}
else
{
if (!EngineUtils.ProcIdEquals(processId, _debuggedProcess.Id))
{
Debug.Fail("Asked to attach to a process while we are debugging");
return(Constants.E_FAIL);
}
}
AD7EngineCreateEvent.Send(this);
AD7ProgramCreateEvent.Send(this);
this.ProgramCreateEventSent = true;
return(Constants.S_OK);
}
catch (MIException e)
{
return(e.HResult);
}
catch (Exception e)
{
return(EngineUtils.UnexpectedException(e));
}
}
// Called by the SDM to indicate that a synchronous debug event, previously sent by the DE to the SDM,
// was received and processed. The only event the sample engine sends in this fashion is Program Destroy.
// It responds to that event by shutting down the engine.
public int ContinueFromSynchronousEvent(IDebugEvent2 eventObject)
{
try
{
if (eventObject is AD7ProgramCreateEvent)
{
Exception exception = null;
try
{
_engineCallback.OnLoadComplete();
// At this point breakpoints and exception settings have been sent down, so we can resume the target
_pollThread.RunOperation(() =>
{
return(_debuggedProcess.ResumeFromLaunch());
});
}
catch (Exception e)
{
exception = e;
// Return from the catch block so that we can let the exception unwind - the stack can get kind of big
}
if (exception != null)
{
// If something goes wrong, report the error and then stop debugging. The SDM will drop errors
// from ContinueFromSynchronousEvent, so we want to deal with them ourself.
SendStartDebuggingError(exception);
_debuggedProcess.Terminate();
}
return(Constants.S_OK);
}
else if (eventObject is AD7ProgramDestroyEvent)
{
Dispose();
}
else
{
Debug.Fail("Unknown syncronious event");
}
}
catch (Exception e)
{
return(EngineUtils.UnexpectedException(e));
}
return(Constants.S_OK);
}
// Launches a process by means of the debug engine.
// Normally, Visual Studio launches a program using the IDebugPortEx2::LaunchSuspended method and then attaches the debugger
// to the suspended program. However, there are circumstances in which the debug engine may need to launch a program
// (for example, if the debug engine is part of an interpreter and the program being debugged is an interpreted language),
// in which case Visual Studio uses the IDebugEngineLaunch2::LaunchSuspended method
// The IDebugEngineLaunch2::ResumeProcess method is called to start the process after the process has been successfully launched in a suspended state.
int IDebugEngineLaunch2.LaunchSuspended(string pszServer, IDebugPort2 port, string exe, string args, string dir, string env, string options, enum_LAUNCH_FLAGS launchFlags, uint hStdInput, uint hStdOutput, uint hStdError, IDebugEventCallback2 ad7Callback, out IDebugProcess2 process)
{
Debug.Assert(_pollThread == null);
Debug.Assert(_engineCallback == null);
Debug.Assert(_debuggedProcess == null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
// Check if the logger was enabled late.
Logger.LoadMIDebugLogger(_configStore);
process = null;
_engineCallback = new EngineCallback(this, ad7Callback);
Exception exception;
try
{
// Note: LaunchOptions.GetInstance can be an expensive operation and may push a wait message loop
LaunchOptions launchOptions = LaunchOptions.GetInstance(_configStore, exe, args, dir, options, _engineCallback, TargetEngine.Native, Logger);
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread(Logger);
var cancellationTokenSource = new CancellationTokenSource();
using (cancellationTokenSource)
{
_pollThread.RunOperation(ResourceStrings.InitializingDebugger, cancellationTokenSource, (HostWaitLoop waitLoop) =>
{
try
{
_debuggedProcess = new DebuggedProcess(true, launchOptions, _engineCallback, _pollThread, _breakpointManager, this, _configStore);
}
finally
{
// If there is an exception from the DebuggeedProcess constructor, it is our responsibility to dispose the DeviceAppLauncher,
// otherwise the DebuggedProcess object takes ownership.
if (_debuggedProcess == null && launchOptions.DeviceAppLauncher != null)
{
launchOptions.DeviceAppLauncher.Dispose();
}
}
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
return _debuggedProcess.Initialize(waitLoop, cancellationTokenSource.Token);
});
}
EngineUtils.RequireOk(port.GetProcess(_debuggedProcess.Id, out process));
return Constants.S_OK;
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
exception = e;
// Return from the catch block so that we can let the exception unwind - the stack can get kind of big
}
// If we just return the exception as an HRESULT, we will loose our message, so we instead send up an error event, and then
// return E_ABORT.
Logger.Flush();
SendStartDebuggingError(exception);
Dispose();
return Constants.E_ABORT;
}
// Attach the debug engine to a program.
int IDebugEngine2.Attach(IDebugProgram2[] rgpPrograms, IDebugProgramNode2[] rgpProgramNodes, uint celtPrograms, IDebugEventCallback2 ad7Callback, enum_ATTACH_REASON dwReason)
{
Debug.Assert(_ad7ProgramId == Guid.Empty);
if (celtPrograms != 1)
{
Debug.Fail("SampleEngine only expects to see one program in a process");
throw new ArgumentException();
}
try
{
AD_PROCESS_ID processId = EngineUtils.GetProcessId(rgpPrograms[0]);
EngineUtils.RequireOk(rgpPrograms[0].GetProgramId(out _ad7ProgramId));
// Attach can either be called to attach to a new process, or to complete an attach
// to a launched process
if (_pollThread == null)
{
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread(Logger);
_engineCallback = new EngineCallback(this, ad7Callback);
// Complete the win32 attach on the poll thread
_pollThread.RunOperation(new Operation(delegate
{
throw new NotImplementedException();
}));
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
}
else
{
if (!EngineUtils.ProcIdEquals(processId, _debuggedProcess.Id))
{
Debug.Fail("Asked to attach to a process while we are debugging");
return Constants.E_FAIL;
}
}
AD7EngineCreateEvent.Send(this);
AD7ProgramCreateEvent.Send(this);
this.ProgramCreateEventSent = true;
return Constants.S_OK;
}
catch (MIException e)
{
return e.HResult;
}
catch (Exception e) when (ExceptionHelper.BeforeCatch(e, Logger, reportOnlyCorrupting: true))
{
return EngineUtils.UnexpectedException(e);
}
}
// Launches a process by means of the debug engine.
// Normally, Visual Studio launches a program using the IDebugPortEx2::LaunchSuspended method and then attaches the debugger
// to the suspended program. However, there are circumstances in which the debug engine may need to launch a program
// (for example, if the debug engine is part of an interpreter and the program being debugged is an interpreted language),
// in which case Visual Studio uses the IDebugEngineLaunch2::LaunchSuspended method
// The IDebugEngineLaunch2::ResumeProcess method is called to start the process after the process has been successfully launched in a suspended state.
int IDebugEngineLaunch2.LaunchSuspended(string pszServer, IDebugPort2 port, string exe, string args, string dir, string env, string options, enum_LAUNCH_FLAGS launchFlags, uint hStdInput, uint hStdOutput, uint hStdError, IDebugEventCallback2 ad7Callback, out IDebugProcess2 process)
{
Debug.Assert(_pollThread == null);
Debug.Assert(_engineCallback == null);
Debug.Assert(_debuggedProcess == null);
Debug.Assert(_ad7ProgramId == Guid.Empty);
process = null;
_engineCallback = new EngineCallback(this, ad7Callback);
Exception exception;
try
{
// Note: LaunchOptions.GetInstance can be an expensive operation and may push a wait message loop
LaunchOptions launchOptions = LaunchOptions.GetInstance(_registryRoot, exe, args, dir, options, _engineCallback);
// We are being asked to debug a process when we currently aren't debugging anything
_pollThread = new WorkerThread();
var cancellationTokenSource = new CancellationTokenSource();
using (cancellationTokenSource)
{
_pollThread.RunOperation(ResourceStrings.InitializingDebugger, cancellationTokenSource, (MICore.WaitLoop waitLoop) =>
{
try
{
_debuggedProcess = new DebuggedProcess(true, launchOptions, _engineCallback, _pollThread, _breakpointManager, this);
}
finally
{
// If there is an exception from the DebuggeedProcess constructor, it is our responsibility to dispose the DeviceAppLauncher,
// otherwise the DebuggedProcess object takes ownership.
if (_debuggedProcess == null && launchOptions.DeviceAppLauncher != null)
{
launchOptions.DeviceAppLauncher.Dispose();
}
}
_pollThread.PostedOperationErrorEvent += _debuggedProcess.OnPostedOperationError;
return(_debuggedProcess.Initialize(waitLoop, cancellationTokenSource.Token));
});
}
EngineUtils.RequireOk(port.GetProcess(_debuggedProcess.Id, out process));
return(Constants.S_OK);
}
catch (Exception e)
{
exception = e;
// Return from the catch block so that we can let the exception unwind - the stack can get kind of big
}
// If we just return the exception as an HRESULT, we will loose our message, so we instead send up an error event, and then
// return E_ABORT.
Logger.Flush();
SendStartDebuggingError(exception);
Dispose();
return(Constants.E_ABORT);
}