public static void GenerateInsets(SliceLayerPart part, int offset, int insetCount)
{
part.AvoidCrossingBoundery = part.TotalOutline.Offset(-offset);
if (insetCount == 0)
{
// if we have no insets defined still create one
part.Insets.Add(part.TotalOutline);
}
else // generate the insets
{
for (int i = 0; i < insetCount; i++)
{
part.Insets.Add(new Polygons());
part.Insets[i] = part.TotalOutline.Offset(-offset * i - offset / 2);
double minimumDistanceToCreateNewPosition = 10;
part.Insets[i] = Clipper.CleanPolygons(part.Insets[i], minimumDistanceToCreateNewPosition);
if (part.Insets[i].Count < 1)
{
part.Insets.RemoveAt(part.Insets.Count - 1);
break;
}
}
}
}
public static void dumpLayerparts(SliceDataStorage storage, string filename)
{
StreamWriter streamToWriteTo = new StreamWriter(filename);
streamToWriteTo.Write("<!DOCTYPE html><html><body>");
Point3 modelSize = storage.modelSize;
Point3 modelMin = storage.modelMin;
for (int volumeIdx = 0; volumeIdx < storage.volumes.Count; volumeIdx++)
{
for (int layerNr = 0; layerNr < storage.volumes[volumeIdx].layers.Count; layerNr++)
{
streamToWriteTo.Write("<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" style=\"width: 500px; height:500px\">\n");
SliceLayer layer = storage.volumes[volumeIdx].layers[layerNr];
for (int i = 0; i < layer.parts.Count; i++)
{
SliceLayerPart part = layer.parts[i];
for (int j = 0; j < part.outline.Count; j++)
{
streamToWriteTo.Write("<polygon points=\"");
for (int k = 0; k < part.outline[j].Count; k++)
{
streamToWriteTo.Write("{0},{1} ".FormatWith((float)(part.outline[j][k].X - modelMin.x) / modelSize.x * 500, (float)(part.outline[j][k].Y - modelMin.y) / modelSize.y * 500));
}
if (j == 0)
{
streamToWriteTo.Write("\" style=\"fill:gray; stroke:black;stroke-width:1\" />\n");
}
else
{
streamToWriteTo.Write("\" style=\"fill:red; stroke:black;stroke-width:1\" />\n");
}
}
}
streamToWriteTo.Write("</svg>\n");
}
}
streamToWriteTo.Write("</body></html>");
streamToWriteTo.Close();
}
private static Polygons AddAllOutlines(SliceLayer layerToAdd, SliceLayerPart partToUseAsBounds, Polygons polysToAddTo, ref bool makeInfillSolid, ConfigSettings config)
{
Polygons polysToIntersect = new Polygons();
for (int partIndex = 0; partIndex < layerToAdd.parts.Count; partIndex++)
{
var partToConsider = layerToAdd.parts[partIndex];
if (config.smallProtrusionProportion > 0)
{
// If the part under consideration intersects the part from the current layer and
// the area of that intersection is less than smallProtrusionProportion % of the part under consideration solidify the infill
var intersection = partToUseAsBounds.TotalOutline.CreateIntersection(partToConsider.TotalOutline);
if (intersection.Count > 0) // They do intersect
{
if (intersection.TotalArea() < partToConsider.TotalOutline.TotalArea() * config.smallProtrusionProportion)
{
makeInfillSolid = true;
return(polysToAddTo);
}
}
}
if (partToUseAsBounds.BoundingBox.Hit(partToConsider.BoundingBox))
{
polysToIntersect =
polysToIntersect.CreateUnion(
layerToAdd.parts[partIndex].Insets[partToConsider.Insets.Count - 1]);
polysToIntersect = Clipper.CleanPolygons(polysToIntersect, cleanDistance_um);
}
}
polysToAddTo = polysToAddTo.CreateIntersection(polysToIntersect);
return(polysToAddTo);
}
private void CalculateInfillData(SliceDataStorage storage, int volumeIndex, int layerIndex, SliceLayerPart part, ref Polygons fillPolygons, ref Polygons bridgePolygons)
{
// generate infill the bottom layers including bridging
foreach (Polygons outline in part.SolidBottomOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
if (layerIndex > 0)
{
double bridgeAngle;
if (Bridge.BridgeAngle(outline, storage.volumes[volumeIndex].layers[layerIndex - 1], out bridgeAngle))
{
Infill.GenerateLinePaths(outline, ref bridgePolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, bridgeAngle);
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.firstLayerExtrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
}
// generate infill for the top layers
foreach (Polygons outline in part.SolidTopOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
// generate infill intermediate layers
foreach (Polygons outline in part.SolidInfillOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
if (true) // use the old infill method
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle + 90 * (layerIndex % 2));
}
else // use the new concentric infill (not tested enough yet) have to handle some bad casses better
{
double oldInfillPercent = config.infillPercent;
config.infillPercent = 100;
Infill.GenerateConcentricInfill(config, outline, ref fillPolygons);
config.infillPercent = oldInfillPercent;
}
}
double fillAngle = config.infillStartingAngle;
// generate the infill for this part on this layer
if (config.infillPercent > 0)
{
switch (config.infillType)
{
case ConfigConstants.INFILL_TYPE.LINES:
if ((layerIndex & 1) == 1)
{
fillAngle += 90;
}
Infill.GenerateLineInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.GRID:
Infill.GenerateGridInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.TRIANGLES:
Infill.GenerateTriangleInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.HEXAGON:
Infill.GenerateHexagonInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle, layerIndex);
break;
case ConfigConstants.INFILL_TYPE.CONCENTRIC:
Infill.GenerateConcentricInfill(config, part.InfillOutlines, ref fillPolygons);
break;
default:
throw new NotImplementedException();
}
}
}
public static void generateSparse(int layerIndex, SliceVolumeStorage storage, int extrusionWidth, int downSkinCount, int upSkinCount)
{
SliceLayer layer = storage.layers[layerIndex];
for (int partNr = 0; partNr < layer.parts.Count; partNr++)
{
SliceLayerPart part = layer.parts[partNr];
Polygons sparse = part.insets[part.insets.Count - 1].Offset(-extrusionWidth / 2);
Polygons downskin = sparse;
Polygons upskin = sparse;
if ((int)(layerIndex - downSkinCount) >= 0)
{
SliceLayer layer2 = storage.layers[layerIndex - downSkinCount];
for (int partNr2 = 0; partNr2 < layer2.parts.Count; partNr2++)
{
if (part.boundaryBox.hit(layer2.parts[partNr2].boundaryBox))
{
if (layer2.parts[partNr2].insets.Count > 1)
{
downskin = downskin.CreateDifference(layer2.parts[partNr2].insets[layer2.parts[partNr2].insets.Count - 2]);
}
else
{
downskin = downskin.CreateDifference(layer2.parts[partNr2].insets[layer2.parts[partNr2].insets.Count - 1]);
}
}
}
}
if ((int)(layerIndex + upSkinCount) < (int)storage.layers.Count)
{
SliceLayer layer2 = storage.layers[layerIndex + upSkinCount];
for (int partNr2 = 0; partNr2 < layer2.parts.Count; partNr2++)
{
if (part.boundaryBox.hit(layer2.parts[partNr2].boundaryBox))
{
if (layer2.parts[partNr2].insets.Count > 1)
{
upskin = upskin.CreateDifference(layer2.parts[partNr2].insets[layer2.parts[partNr2].insets.Count - 2]);
}
else
{
upskin = upskin.CreateDifference(layer2.parts[partNr2].insets[layer2.parts[partNr2].insets.Count - 1]);
}
}
}
}
Polygons result = upskin.CreateUnion(downskin);
double minAreaSize = 3.0;//(2 * M_PI * ((double)(config.extrusionWidth) / 1000.0) * ((double)(config.extrusionWidth) / 1000.0)) * 3;
for (int i = 0; i < result.Count; i++)
{
double area = Math.Abs(result[i].Area()) / 1000.0 / 1000.0;
if (area < minAreaSize) /* Only create an up/down skin if the area is large enough. So you do not create tiny blobs of "trying to fill" */
{
result.RemoveAt(i);
i -= 1;
}
}
part.sparseOutline = sparse.CreateDifference(result);
}
}
private static Polygons RemoveAdditionalOutlinesForPart(SliceLayer layerToSubtract, SliceLayerPart partToUseAsBounds, Polygons polygonsToSubtractFrom)
{
for (int partIndex = 0; partIndex < layerToSubtract.parts.Count; partIndex++)
{
if (partToUseAsBounds.BoundingBox.Hit(layerToSubtract.parts[partIndex].BoundingBox))
{
polygonsToSubtractFrom = polygonsToSubtractFrom.CreateDifference(layerToSubtract.parts[partIndex].Insets[layerToSubtract.parts[partIndex].Insets.Count - 1]);
polygonsToSubtractFrom = Clipper.CleanPolygons(polygonsToSubtractFrom, cleanDistance_um);
}
}
return polygonsToSubtractFrom;
}
private static Polygons AddAllOutlines(SliceLayer layerToAdd, SliceLayerPart partToUseAsBounds, Polygons polysToAddTo, ref bool makeInfillSolid, ConfigSettings config)
{
Polygons polysToIntersect = new Polygons();
for (int partIndex = 0; partIndex < layerToAdd.parts.Count; partIndex++)
{
var partToConsider = layerToAdd.parts[partIndex];
if (config.smallProtrusionProportion > 0)
{
// If the part under consideration intersects the part from the current layer and
// the area of that intersection is less than smallProtrusionProportion % of the part under consideration solidify the infill
var intersection = partToUseAsBounds.TotalOutline.CreateIntersection(partToConsider.TotalOutline);
if (intersection.Count > 0) // They do intersect
{
if (intersection.TotalArea() < partToConsider.TotalOutline.TotalArea() * config.smallProtrusionProportion)
{
makeInfillSolid = true;
return polysToAddTo;
}
}
}
if (partToUseAsBounds.BoundingBox.Hit(partToConsider.BoundingBox))
{
polysToIntersect =
polysToIntersect.CreateUnion(
layerToAdd.parts[partIndex].Insets[partToConsider.Insets.Count - 1]);
polysToIntersect = Clipper.CleanPolygons(polysToIntersect, cleanDistance_um);
}
}
polysToAddTo = polysToAddTo.CreateIntersection(polysToIntersect);
return polysToAddTo;
}
private void CalculateInfillData(SliceDataStorage storage, int volumeIndex, int layerIndex, SliceLayerPart part, ref Polygons fillPolygons, ref Polygons bridgePolygons)
{
// generate infill the bottom layers including bridging
foreach (Polygons outline in part.SolidBottomOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
if (layerIndex > 0)
{
double bridgeAngle;
if (Bridge.BridgeAngle(outline, storage.volumes[volumeIndex].layers[layerIndex - 1], out bridgeAngle))
{
Infill.GenerateLinePaths(outline, ref bridgePolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, bridgeAngle);
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.firstLayerExtrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
}
// generate infill for the top layers
foreach (Polygons outline in part.SolidTopOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle);
}
// generate infill intermediate layers
foreach (Polygons outline in part.SolidInfillOutlines.CreateLayerOutlines(PolygonsHelper.LayerOpperation.EvenOdd))
{
if (true) // use the old infill method
{
Infill.GenerateLinePaths(outline, ref fillPolygons, config.extrusionWidth_um, config.infillExtendIntoPerimeter_um, config.infillStartingAngle + 90 * (layerIndex % 2));
}
else // use the new concentric infill (not tested enough yet) have to handle some bad casses better
{
double oldInfillPercent = config.infillPercent;
config.infillPercent = 100;
Infill.GenerateConcentricInfill(config, outline, ref fillPolygons);
config.infillPercent = oldInfillPercent;
}
}
double fillAngle = config.infillStartingAngle;
// generate the infill for this part on this layer
if (config.infillPercent > 0)
{
switch (config.infillType)
{
case ConfigConstants.INFILL_TYPE.LINES:
if ((layerIndex & 1) == 1)
{
fillAngle += 90;
}
Infill.GenerateLineInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.GRID:
Infill.GenerateGridInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.TRIANGLES:
Infill.GenerateTriangleInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.HEXAGON:
Infill.GenerateHexagonInfill(config, part.InfillOutlines, ref fillPolygons, fillAngle, layerIndex);
break;
case ConfigConstants.INFILL_TYPE.CONCENTRIC:
Infill.GenerateConcentricInfill(config, part.InfillOutlines, ref fillPolygons);
break;
default:
throw new NotImplementedException();
}
}
}
//Add a single layer from a single mesh-volume to the GCode
private void AddVolumeLayerToGCode(SliceDataStorage storage, GCodePlanner gcodeLayer, int volumeIndex, int layerIndex, int extrusionWidth_um, int fanSpeedPercent)
{
int prevExtruder = gcodeLayer.getExtruder();
bool extruderChanged = gcodeLayer.SetExtruder(volumeIndex);
SliceLayer layer = storage.volumes[volumeIndex].layers[layerIndex];
if (extruderChanged)
{
addWipeTower(storage, gcodeLayer, layerIndex, prevExtruder, extrusionWidth_um);
}
if (storage.wipeShield.Count > 0 && storage.volumes.Count > 1)
{
gcodeLayer.SetAlwaysRetract(true);
gcodeLayer.WritePolygonsByOptimizer(storage.wipeShield[layerIndex], skirtConfig);
gcodeLayer.SetAlwaysRetract(!config.avoidCrossingPerimeters);
}
PathOrderOptimizer partOrderOptimizer = new PathOrderOptimizer(new IntPoint());
for (int partIndex = 0; partIndex < layer.parts.Count; partIndex++)
{
if (config.continuousSpiralOuterPerimeter && partIndex > 0)
{
continue;
}
partOrderOptimizer.AddPolygon(layer.parts[partIndex].Insets[0][0]);
}
partOrderOptimizer.Optimize();
for (int partIndex = 0; partIndex < partOrderOptimizer.bestPolygonOrderIndex.Count; partIndex++)
{
if (config.continuousSpiralOuterPerimeter && partIndex > 0)
{
continue;
}
SliceLayerPart part = layer.parts[partOrderOptimizer.bestPolygonOrderIndex[partIndex]];
if (config.avoidCrossingPerimeters)
{
gcodeLayer.SetOuterPerimetersToAvoidCrossing(part.AvoidCrossingBoundery);
}
else
{
gcodeLayer.SetAlwaysRetract(true);
}
Polygons fillPolygons = new Polygons();
Polygons bridgePolygons = new Polygons();
CalculateInfillData(storage, volumeIndex, layerIndex, part, ref fillPolygons, ref bridgePolygons);
// Write the bridge polgons out first so the perimeter will have more to hold to while bridging the gaps.
// It would be even better to slow down the perimeters that are part of bridges but that is a bit harder.
if (bridgePolygons.Count > 0)
{
gcode.WriteFanCommand(config.bridgeFanSpeedPercent);
gcodeLayer.WritePolygonsByOptimizer(bridgePolygons, bridgConfig);
gcode.WriteFanCommand(fanSpeedPercent);
}
if (config.numberOfPerimeters > 0)
{
if (partIndex != lastPartIndex)
{
// force a retract if changing islands
gcodeLayer.ForceRetract();
lastPartIndex = partIndex;
}
if (config.continuousSpiralOuterPerimeter)
{
if (layerIndex >= config.numberOfBottomLayers)
{
inset0Config.spiralize = true;
}
}
// If we are on the very first layer we start with the outside in so that we can stick to the bed better.
if (config.outsidePerimetersFirst || layerIndex == 0 || inset0Config.spiralize)
{
// First the outside (this helps with accuracy)
if (part.Insets.Count > 0)
{
gcodeLayer.WritePolygonsByOptimizer(part.Insets[0], inset0Config);
}
if (!inset0Config.spiralize)
{
for (int perimeterIndex = 1; perimeterIndex < part.Insets.Count; perimeterIndex++)
{
gcodeLayer.WritePolygonsByOptimizer(part.Insets[perimeterIndex], insetXConfig);
}
}
}
else // This is so we can do overhanges better (the outside can stick a bit to the inside).
{
// Print everything but the first perimeter from the outside in so the little parts have more to stick to.
for (int perimeterIndex = 1; perimeterIndex < part.Insets.Count; perimeterIndex++)
{
gcodeLayer.WritePolygonsByOptimizer(part.Insets[perimeterIndex], insetXConfig);
}
// then 0
if (part.Insets.Count > 0)
{
gcodeLayer.WritePolygonsByOptimizer(part.Insets[0], inset0Config);
}
}
}
gcodeLayer.WritePolygonsByOptimizer(fillPolygons, fillConfig);
//After a layer part, make sure the nozzle is inside the comb boundary, so we do not retract on the perimeter.
if (!config.continuousSpiralOuterPerimeter || layerIndex < config.numberOfBottomLayers)
{
gcodeLayer.MoveInsideTheOuterPerimeter(extrusionWidth_um * 2);
}
}
gcodeLayer.SetOuterPerimetersToAvoidCrossing(null);
}
private void writeGCode(SliceDataStorage storage)
{
gcode.WriteComment("filamentDiameter = {0}".FormatWith(config.filamentDiameter));
gcode.WriteComment("extrusionWidth = {0}".FormatWith(config.extrusionWidth));
gcode.WriteComment("firstLayerExtrusionWidth = {0}".FormatWith(config.firstLayerExtrusionWidth));
gcode.WriteComment("layerThickness = {0}".FormatWith(config.layerThickness));
gcode.WriteComment("firstLayerThickness = {0}".FormatWith(config.firstLayerThickness));
if (fileNumber == 1)
{
if (gcode.GetOutputType() == ConfigConstants.OUTPUT_TYPE.ULTIGCODE)
{
gcode.WriteComment("TYPE:UltiGCode");
gcode.WriteComment("TIME:<__TIME__>");
gcode.WriteComment("MATERIAL:<FILAMENT>");
gcode.WriteComment("MATERIAL2:<FILAMEN2>");
}
gcode.WriteCode(config.startCode);
if (gcode.GetOutputType() == ConfigConstants.OUTPUT_TYPE.BFB)
{
gcode.WriteComment("enable auto-retraction");
gcode.WriteLine("M227 S{0} P{1}".FormatWith(config.retractionOnTravel * 2560, config.retractionOnTravel * 2560));
}
}
else
{
gcode.WriteFanCommand(0);
gcode.ResetExtrusionValue();
gcode.WriteRetraction();
gcode.setZ(maxObjectHeight + 5000);
gcode.WriteMove(gcode.GetPositionXY(), config.travelSpeed, 0);
gcode.WriteMove(new IntPoint(storage.modelMin.x, storage.modelMin.y), config.travelSpeed, 0);
}
fileNumber++;
int totalLayers = storage.volumes[0].layers.Count;
// let's remove any of the layers on top that are empty
{
for (int layerIndex = totalLayers - 1; layerIndex >= 0; layerIndex--)
{
bool layerHasData = false;
foreach (SliceVolumeStorage currentVolume in storage.volumes)
{
SliceLayer currentLayer = currentVolume.layers[layerIndex];
for (int partIndex = 0; partIndex < currentVolume.layers[layerIndex].parts.Count; partIndex++)
{
SliceLayerPart currentPart = currentLayer.parts[partIndex];
if (currentPart.TotalOutline.Count > 0)
{
layerHasData = true;
break;
}
}
}
if (layerHasData)
{
break;
}
totalLayers--;
}
}
gcode.WriteComment("Layer count: {0}".FormatWith(totalLayers));
// keep the raft generation code inside of raft
Raft.GenerateRaftGCodeIfRequired(storage, config, gcode);
int volumeIndex = 0;
for (int layerIndex = 0; layerIndex < totalLayers; layerIndex++)
{
if (MatterSlice.Canceled)
{
return;
}
LogOutput.Log("Writing Layers {0}/{1}\n".FormatWith(layerIndex + 1, totalLayers));
LogOutput.logProgress("export", layerIndex + 1, totalLayers);
int extrusionWidth_um = config.extrusionWidth_um;
if (layerIndex == 0)
{
extrusionWidth_um = config.firstLayerExtrusionWidth_um;
}
if (layerIndex == 0)
{
skirtConfig.setData(config.firstLayerSpeed, extrusionWidth_um, "SKIRT");
inset0Config.setData(config.firstLayerSpeed, extrusionWidth_um, "WALL-OUTER");
insetXConfig.setData(config.firstLayerSpeed, extrusionWidth_um, "WALL-INNER");
fillConfig.setData(config.firstLayerSpeed, extrusionWidth_um, "FILL", false);
bridgConfig.setData(config.firstLayerSpeed, extrusionWidth_um, "BRIDGE");
supportNormalConfig.setData(config.firstLayerSpeed, config.supportExtrusionWidth_um, "SUPPORT");
supportInterfaceConfig.setData(config.firstLayerSpeed, config.extrusionWidth_um, "SUPPORT-INTERFACE");
}
else
{
skirtConfig.setData(config.insidePerimetersSpeed, extrusionWidth_um, "SKIRT");
inset0Config.setData(config.outsidePerimeterSpeed, extrusionWidth_um, "WALL-OUTER");
insetXConfig.setData(config.insidePerimetersSpeed, extrusionWidth_um, "WALL-INNER");
fillConfig.setData(config.infillSpeed, extrusionWidth_um, "FILL", false);
bridgConfig.setData(config.bridgeSpeed, extrusionWidth_um, "BRIDGE");
supportNormalConfig.setData(config.supportMaterialSpeed, config.supportExtrusionWidth_um, "SUPPORT");
supportInterfaceConfig.setData(config.supportMaterialSpeed, config.extrusionWidth_um, "SUPPORT-INTERFACE");
}
gcode.WriteComment("LAYER:{0}".FormatWith(layerIndex));
if (layerIndex == 0)
{
gcode.SetExtrusion(config.firstLayerThickness_um, config.filamentDiameter_um, config.extrusionMultiplier);
}
else
{
gcode.SetExtrusion(config.layerThickness_um, config.filamentDiameter_um, config.extrusionMultiplier);
}
GCodePlanner gcodeLayer = new GCodePlanner(gcode, config.travelSpeed, config.minimumTravelToCauseRetraction_um);
// get the correct height for this layer
int z = config.firstLayerThickness_um + layerIndex * config.layerThickness_um;
if (config.enableRaft)
{
z += config.raftBaseThickness_um + config.raftInterfaceThicknes_um + config.raftSurfaceLayers * config.raftSurfaceThickness_um;
if (layerIndex == 0)
{
// We only raise the first layer of the print up by the air gap.
// To give it:
// Less press into the raft
// More time to cool
// more surface area to air while extruding
z += config.raftAirGap_um;
}
}
gcode.setZ(z);
// We only create the skirt if we are on layer 0 and the first volume and there is no raft.
if (layerIndex == 0 && volumeIndex == 0 && !Raft.ShouldGenerateRaft(config))
{
AddSkirtToGCode(storage, gcodeLayer, volumeIndex, layerIndex);
}
bool printSupportFirst = (storage.support.generated && config.supportExtruder >= 0 && config.supportExtruder == gcodeLayer.getExtruder());
if (printSupportFirst)
{
AddSupportToGCode(storage, gcodeLayer, layerIndex, config);
}
int fanSpeedPercent = GetFanSpeed(layerIndex, gcodeLayer);
for (int volumeCnt = 0; volumeCnt < storage.volumes.Count; volumeCnt++)
{
if (volumeCnt > 0)
{
volumeIndex = (volumeIndex + 1) % storage.volumes.Count;
}
AddVolumeLayerToGCode(storage, gcodeLayer, volumeIndex, layerIndex, extrusionWidth_um, fanSpeedPercent);
}
if (!printSupportFirst)
{
AddSupportToGCode(storage, gcodeLayer, layerIndex, config);
}
//Finish the layer by applying speed corrections for minimum layer times.
gcodeLayer.ForceMinimumLayerTime(config.minimumLayerTimeSeconds, config.minimumPrintingSpeed);
gcode.WriteFanCommand(fanSpeedPercent);
int currentLayerThickness_um = config.layerThickness_um;
if (layerIndex <= 0)
{
currentLayerThickness_um = config.firstLayerThickness_um;
}
gcodeLayer.WriteGCode(config.doCoolHeadLift, currentLayerThickness_um);
}
LogOutput.Log("Wrote layers in {0:0.00}s.\n".FormatWith(timeKeeper.Elapsed.Seconds));
timeKeeper.Restart();
gcode.TellFileSize();
gcode.WriteFanCommand(0);
//Store the object height for when we are printing multiple objects, as we need to clear every one of them when moving to the next position.
maxObjectHeight = Math.Max(maxObjectHeight, storage.modelSize.z);
}
public static void GenerateTopAndBottom(int layerIndex, SliceVolumeStorage storage, int extrusionWidth, int downLayerCount, int upLayerCount)
{
SliceLayer layer = storage.layers[layerIndex];
for (int partIndex = 0; partIndex < layer.parts.Count; partIndex++)
{
SliceLayerPart part = layer.parts[partIndex];
Polygons insetWithOffset = part.Insets[part.Insets.Count - 1].Offset(-extrusionWidth / 2);
Polygons infillOutlines = new Polygons(insetWithOffset);
// calculate the bottom outlines
if (downLayerCount > 0)
{
Polygons bottomOutlines = new Polygons(insetWithOffset);
if (layerIndex - 1 >= 0)
{
bottomOutlines = RemoveAdditionalOutlinesForPart(storage.layers[layerIndex - 1], part, bottomOutlines);
RemoveSmallAreas(extrusionWidth, bottomOutlines);
}
infillOutlines = infillOutlines.CreateDifference(bottomOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.SolidBottomOutlines = bottomOutlines;
}
// calculate the top outlines
if (upLayerCount > 0)
{
Polygons topOutlines = new Polygons(insetWithOffset);
topOutlines = topOutlines.CreateDifference(part.SolidBottomOutlines);
topOutlines = Clipper.CleanPolygons(topOutlines, cleanDistance_um);
if (part.Insets.Count > 1)
{
// Add thin wall filling by taking the area between the insets.
Polygons thinWalls = part.Insets[0].Offset(-extrusionWidth / 2).CreateDifference(part.Insets[1].Offset(extrusionWidth / 2));
topOutlines.AddAll(thinWalls);
}
if (layerIndex + 1 < storage.layers.Count)
{
topOutlines = RemoveAdditionalOutlinesForPart(storage.layers[layerIndex + 1], part, topOutlines);
RemoveSmallAreas(extrusionWidth, topOutlines);
}
infillOutlines = infillOutlines.CreateDifference(topOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.SolidTopOutlines = topOutlines;
}
// calculate the solid infill outlines
if (upLayerCount > 1 || downLayerCount > 1)
{
Polygons solidInfillOutlines = new Polygons(insetWithOffset);
solidInfillOutlines = solidInfillOutlines.CreateDifference(part.SolidBottomOutlines);
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
solidInfillOutlines = solidInfillOutlines.CreateDifference(part.SolidTopOutlines);
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
int upEnd = layerIndex + upLayerCount + 1;
if (upEnd <= storage.layers.Count && layerIndex - downLayerCount >= 0)
{
Polygons totalPartsToRemove = new Polygons(insetWithOffset);
int upStart = layerIndex + 2;
for (int layerToTest = upStart; layerToTest < upEnd; layerToTest++)
{
totalPartsToRemove = AddAllOutlines(storage.layers[layerToTest], part, totalPartsToRemove);
totalPartsToRemove = Clipper.CleanPolygons(totalPartsToRemove, cleanDistance_um);
}
int downStart = layerIndex - 1;
int downEnd = layerIndex - downLayerCount;
for (int layerToTest = downStart; layerToTest >= downEnd; layerToTest--)
{
totalPartsToRemove = AddAllOutlines(storage.layers[layerToTest], part, totalPartsToRemove);
totalPartsToRemove = Clipper.CleanPolygons(totalPartsToRemove, cleanDistance_um);
}
solidInfillOutlines = solidInfillOutlines.CreateDifference(totalPartsToRemove);
RemoveSmallAreas(extrusionWidth, solidInfillOutlines);
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
}
part.SolidInfillOutlines = solidInfillOutlines;
infillOutlines = infillOutlines.CreateDifference(solidInfillOutlines);
}
RemoveSmallAreas(extrusionWidth, infillOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.InfillOutlines = infillOutlines;
}
}
private static Polygons RemoveAdditionalOutlinesForPart(SliceLayer layerToSubtract, SliceLayerPart partToUseAsBounds, Polygons polygonsToSubtractFrom)
{
for (int partIndex = 0; partIndex < layerToSubtract.parts.Count; partIndex++)
{
if (partToUseAsBounds.BoundingBox.Hit(layerToSubtract.parts[partIndex].BoundingBox))
{
polygonsToSubtractFrom = polygonsToSubtractFrom.CreateDifference(layerToSubtract.parts[partIndex].Insets[layerToSubtract.parts[partIndex].Insets.Count - 1]);
polygonsToSubtractFrom = Clipper.CleanPolygons(polygonsToSubtractFrom, cleanDistance_um);
}
}
return(polygonsToSubtractFrom);
}
public static void GenerateTopAndBottom(int layerIndex, SliceVolumeStorage storage, int extrusionWidth, ConfigSettings config)
{
var downLayerCount = config.numberOfBottomLayers;
var upLayerCount = config.numberOfTopLayers;
SliceLayer layer = storage.layers[layerIndex];
for (int partIndex = 0; partIndex < layer.parts.Count; partIndex++)
{
SliceLayerPart part = layer.parts[partIndex];
Polygons insetWithOffset = part.Insets[part.Insets.Count - 1].Offset(-extrusionWidth / 2);
Polygons infillOutlines = new Polygons(insetWithOffset);
// calculate the bottom outlines
if (downLayerCount > 0)
{
Polygons bottomOutlines = new Polygons(insetWithOffset);
if (layerIndex - 1 >= 0)
{
bottomOutlines = RemoveAdditionalOutlinesForPart(storage.layers[layerIndex - 1], part, bottomOutlines);
RemoveSmallAreas(extrusionWidth, bottomOutlines);
}
infillOutlines = infillOutlines.CreateDifference(bottomOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.SolidBottomOutlines = bottomOutlines;
}
// calculate the top outlines
if (upLayerCount > 0)
{
Polygons topOutlines = new Polygons(insetWithOffset);
topOutlines = topOutlines.CreateDifference(part.SolidBottomOutlines);
topOutlines = Clipper.CleanPolygons(topOutlines, cleanDistance_um);
if (part.Insets.Count > 1)
{
// Add thin wall filling by taking the area between the insets.
Polygons thinWalls = part.Insets[0].Offset(-extrusionWidth / 2).CreateDifference(part.Insets[1].Offset(extrusionWidth / 2));
topOutlines.AddAll(thinWalls);
}
if (layerIndex + 1 < storage.layers.Count)
{
topOutlines = RemoveAdditionalOutlinesForPart(storage.layers[layerIndex + 1], part, topOutlines);
RemoveSmallAreas(extrusionWidth, topOutlines);
}
infillOutlines = infillOutlines.CreateDifference(topOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.SolidTopOutlines = topOutlines;
}
// calculate the solid infill outlines
if (upLayerCount > 1 || downLayerCount > 1)
{
var solidInfillOutlines = new Polygons(insetWithOffset);
solidInfillOutlines = solidInfillOutlines.CreateDifference(part.SolidBottomOutlines);
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
solidInfillOutlines = solidInfillOutlines.CreateDifference(part.SolidTopOutlines);
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
var upStart = layerIndex + 2;
var upEnd = layerIndex + upLayerCount + 1;
var downStart = layerIndex - 1;
var downEnd = layerIndex - downLayerCount;
if (upEnd <= storage.layers.Count && downEnd >= 0)
{
var makeInfillSolid = false;
var totalPartsToRemove = new Polygons(insetWithOffset);
for (var layerToTest = upStart; layerToTest < upEnd; layerToTest++)
{
totalPartsToRemove = AddAllOutlines(storage.layers[layerToTest], part, totalPartsToRemove, ref makeInfillSolid, config);
totalPartsToRemove = Clipper.CleanPolygons(totalPartsToRemove, cleanDistance_um);
if (makeInfillSolid)
{
break;
}
}
for (var layerToTest = downStart; layerToTest >= downEnd; layerToTest--)
{
totalPartsToRemove = AddAllOutlines(storage.layers[layerToTest], part, totalPartsToRemove, ref makeInfillSolid, config);
totalPartsToRemove = Clipper.CleanPolygons(totalPartsToRemove, cleanDistance_um);
if (makeInfillSolid)
{
break;
}
}
if (!makeInfillSolid)
{
solidInfillOutlines = solidInfillOutlines.CreateDifference(totalPartsToRemove);
RemoveSmallAreas(extrusionWidth, solidInfillOutlines);
}
solidInfillOutlines = Clipper.CleanPolygons(solidInfillOutlines, cleanDistance_um);
}
part.SolidInfillOutlines = solidInfillOutlines;
infillOutlines = infillOutlines.CreateDifference(solidInfillOutlines);
Polygons totalInfillOutlines = null;
double totalInfillArea = 0.0;
if (config.infillSolidProportion > 0)
{
totalInfillOutlines = infillOutlines.CreateUnion(solidInfillOutlines);
totalInfillArea = totalInfillOutlines.TotalArea();
}
if (config.infillSolidProportion > 0)
{
var solidInfillArea = solidInfillOutlines.TotalArea();
if (solidInfillArea > totalInfillArea * config.infillSolidProportion)
{
solidInfillOutlines = solidInfillOutlines.CreateUnion(infillOutlines);
infillOutlines = new Polygons();
part.SolidInfillOutlines = solidInfillOutlines;
}
var solidTopOutlinesArea = part.SolidTopOutlines.TotalArea();
if (totalInfillArea < solidTopOutlinesArea * config.infillSolidProportion / 2)
{
var totalSolidTop = totalInfillOutlines.CreateUnion(part.SolidTopOutlines);
part.SolidTopOutlines = totalSolidTop;
part.SolidInfillOutlines = new Polygons();
infillOutlines = part.InfillOutlines = new Polygons();
}
var solidBottomOutlinesArea = part.SolidBottomOutlines.TotalArea();
if (totalInfillArea < solidBottomOutlinesArea * config.infillSolidProportion / 2)
{
var totalSolidBottom = totalInfillOutlines.CreateUnion(part.SolidBottomOutlines);
part.SolidBottomOutlines = totalSolidBottom;
part.SolidInfillOutlines = new Polygons();
infillOutlines = part.InfillOutlines = new Polygons();
}
}
if (config.minInfillArea_mm2 > 0)
{
var infillArea = infillOutlines.TotalArea() / 1e6; // convert from um2 to mm2
if (infillArea < config.minInfillArea_mm2)
{
solidInfillOutlines = solidInfillOutlines.CreateUnion(infillOutlines);
infillOutlines = new Polygons();
part.SolidInfillOutlines = solidInfillOutlines;
}
}
}
RemoveSmallAreas(extrusionWidth, infillOutlines);
infillOutlines = Clipper.CleanPolygons(infillOutlines, cleanDistance_um);
part.InfillOutlines = infillOutlines;
}
}
private void CalculateInfillData(SliceDataStorage storage, int volumeIndex, int layerIndex, int extrusionWidth_um, SliceLayerPart part, ref Polygons fillPolygons, ref Polygons bridgePolygons)
{
// generate infill for outline including bridging
foreach (Polygons outline in part.skinOutline.SplitIntoParts())
{
double partFillAngle = config.infillStartingAngle;
if ((layerIndex & 1) == 1)
{
partFillAngle += 90;
}
if (layerIndex > 0)
{
double bridgeAngle;
if (Bridge.BridgeAngle(outline, storage.volumes[volumeIndex].layers[layerIndex - 1], out bridgeAngle))
{
Infill.GenerateLinePaths(outline, ref bridgePolygons, extrusionWidth_um, config.infillExtendIntoPerimeter_um, bridgeAngle);
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, extrusionWidth_um, config.infillExtendIntoPerimeter_um, partFillAngle);
}
}
else
{
Infill.GenerateLinePaths(outline, ref fillPolygons, extrusionWidth_um, config.infillExtendIntoPerimeter_um, partFillAngle);
}
}
double fillAngle = config.infillStartingAngle;
// generate the infill for this part on this layer
if (config.infillPercent > 0)
{
switch (config.infillType)
{
case ConfigConstants.INFILL_TYPE.LINES:
if ((layerIndex & 1) == 1)
{
fillAngle += 90;
}
Infill.GenerateLineInfill(config, part.sparseOutline, ref fillPolygons, extrusionWidth_um, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.GRID:
Infill.GenerateGridInfill(config, part.sparseOutline, ref fillPolygons, extrusionWidth_um, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.TRIANGLES:
Infill.GenerateTriangleInfill(config, part.sparseOutline, ref fillPolygons, extrusionWidth_um, fillAngle);
break;
case ConfigConstants.INFILL_TYPE.HEXAGON:
Infill.GenerateHexagonInfill(config, part.sparseOutline, ref fillPolygons, extrusionWidth_um, fillAngle, layerIndex);
break;
case ConfigConstants.INFILL_TYPE.CONCENTRIC:
Infill.generateConcentricInfill(config, part.sparseOutline, ref fillPolygons, extrusionWidth_um, fillAngle);
break;
default:
throw new NotImplementedException();
}
}
}
private static Polygons AddAllOutlines(SliceLayer layerToAdd, SliceLayerPart partToUseAsBounds, Polygons polysToAddTo)
{
Polygons polysToIntersect = new Polygons();
for (int partIndex = 0; partIndex < layerToAdd.parts.Count; partIndex++)
{
if (partToUseAsBounds.BoundingBox.Hit(layerToAdd.parts[partIndex].BoundingBox))
{
polysToIntersect = polysToIntersect.CreateUnion(layerToAdd.parts[partIndex].Insets[layerToAdd.parts[partIndex].Insets.Count - 1]);
polysToIntersect = Clipper.CleanPolygons(polysToIntersect, cleanDistance_um);
}
}
polysToAddTo = polysToAddTo.CreateIntersection(polysToIntersect);
return polysToAddTo;
}
