private void HelpForm_Load(object sender, EventArgs e)
{
string sHelpContent = String.Empty;
try
{
sHelpContent = TokenUtilities.GetEmbeddedText("MassiveDarknessRandomDungeonGenerator.MDRandomDungeonGeneratorHelpContents.rtf");
}
catch (Exception exHelp)
{
// use default help content
sHelpContent = @"{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0 Courier New;}{\f1\fnil\fcharset2 Symbol;}}" +
@" {\*\generator Msftedit 5.41.21.2510;}\viewkind4\uc1\pard\fs22 Unable to load About contents: " + exHelp.Message + @" \par}";
}
rtxtHelpContent.Rtf = sHelpContent;
}
private void ParseConfigFile(string filename)
{
try
{
string sConfigContents = TokenUtilities.GetEmbeddedText("MassiveDarknessRandomDungeonGenerator.MassiveDarknessInfo.cfg");
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.LoadXml(sConfigContents);
// Extract the Tile sets
XmlNodeList xmlTileSets = xmlDoc.GetElementsByTagName("TileSet");
foreach (XmlNode xmlTileSet in xmlTileSets)
{
TileSet newTileSet = new TileSet(xmlTileSet);
lstTilesets.Items.Add(newTileSet);
}
// Extract the Chips
XmlNodeList xmlChips = xmlDoc.GetElementsByTagName("Chip");
foreach (XmlNode xmlChip in xmlChips)
{
Chip newChip = new Chip(xmlChip);
lstChips.Add(newChip);
switch (newChip.Name.ToLower())
{
case "start":
chpStart = newChip;
break;
case "exit":
chpExit = newChip;
break;
case "door":
chpDoor = newChip;
break;
case "bridge":
chpBridge = newChip;
break;
case "lvl1":
chpLevel1 = newChip;
break;
case "lvl2":
chpLevel2 = newChip;
break;
case "lvl3":
chpLevel3 = newChip;
break;
case "lvl4":
chpLevel4 = newChip;
break;
case "lvl5":
chpLevel5 = newChip;
break;
default:
break;
}
}
// Extract the Dice
XmlNodeList xmlDice = xmlDoc.GetElementsByTagName("Die");
foreach (XmlNode xmlDie in xmlDice)
{
Die newDie = new Die(xmlDie);
lstDice.Add(newDie);
switch (newDie.Name.ToLower())
{
case "red":
dieRed = newDie;
break;
case "green":
dieGreen = newDie;
break;
default:
break;
}
}
// Validate the extraction of the Chips and Dice
if ((null == chpStart) || (null == chpExit) || (null == chpDoor) || (null == chpBridge))
{
sLoadErrors += Environment.NewLine + "Error parsing configuration file: Chip extraction failed.";
}
if ((null == chpLevel1) || (null == chpLevel2) || (null == chpLevel3) || (null == chpLevel4) || (null == chpLevel5))
{
sLoadErrors += Environment.NewLine + "Error parsing configuration file: Chip Level extraction failed.";
}
if ((null == dieRed) || (null == dieGreen))
{
sLoadErrors += Environment.NewLine + "Error parsing configuration file: Die extraction failed.";
}
}
catch (Exception exXMLParse)
{
sLoadErrors = "Error parsing configuration file:" + Environment.NewLine + Environment.NewLine + exXMLParse.Message;
}
}
public void PerformSummaryLayout(Graphics grDungeon, StringBuilder sbBGMapEditorFileContents)
{
// Load the summary tile image
Image iTileImage = TokenUtilities.GetTokenImage(this, false, "", true);
if (null != iTileImage)
{
grDungeon.DrawImage(iTileImage, new Rectangle(ptLayoutTileLayoutLocation.X, ptLayoutTileLayoutLocation.Y, iTileImage.Width, iTileImage.Height));
}
// Add the current summary tile to the MAP file
sbBGMapEditorFileContents.AppendLine(sBGMapEditorLayoutTilePath + ";tile;" + ptLayoutTileLayoutLocation.X.ToString() + "x" + ptLayoutTileLayoutLocation.Y.ToString() + ";5");
// Add the bridge
if (null != cBridge)
{
Point ptBridgeLocation = new Point(ptLayoutTileLayoutLocation.X, ptLayoutTileLayoutLocation.Y);
switch (iConnectedCorridorZoneEdge)
{
case 1:
ptBridgeLocation.Offset(2 * (iLayoutTileWidth / 3), iLayoutTileHeight);
break;
case 2:
ptBridgeLocation.Offset(iLayoutTileWidth / 3, iLayoutTileHeight);
break;
case 3:
ptBridgeLocation.Offset(0, iLayoutTileHeight);
break;
case 4:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.LayoutTileHeight, 2 * (iLayoutTileHeight / 3));
break;
case 5:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.LayoutTileHeight, iLayoutTileHeight / 3);
break;
case 6:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.LayoutTileHeight, 0);
break;
case 7:
ptBridgeLocation.Offset(0, -1 * cBridge.LayoutTileHeight);
break;
case 8:
ptBridgeLocation.Offset(iLayoutTileWidth / 3, -1 * cBridge.LayoutTileHeight);
break;
case 9:
ptBridgeLocation.Offset(2 * (iLayoutTileWidth / 3), -1 * cBridge.LayoutTileHeight);
break;
case 10:
ptBridgeLocation.Offset(iLayoutTileWidth, 0);
break;
case 11:
ptBridgeLocation.Offset(iLayoutTileWidth, iLayoutTileHeight / 3);
break;
case 12:
ptBridgeLocation.Offset(iLayoutTileWidth, 2 * (iLayoutTileHeight / 3));
break;
default:
break;
}
sbBGMapEditorFileContents.AppendLine(cBridge.BGMapEditorLayoutTilePath + ";tile;" + ptBridgeLocation.X.ToString() + "x" + ptBridgeLocation.Y.ToString() + ";5");
Image iBridgeImage = TokenUtilities.GetTokenImage(cBridge, false, "", true);
if (null != iBridgeImage)
{
grDungeon.DrawImage(iBridgeImage, new Rectangle(ptBridgeLocation.X, ptBridgeLocation.Y, iBridgeImage.Width, iBridgeImage.Height));
}
}
}
public void PerformLayout(Graphics grDungeon, StringBuilder sbBGMapEditorFileContents, bool bUseFullColorTiles)
{
// Load the tile image
Image iTileImage = TokenUtilities.GetTokenImage(this, bUseFullColorTiles);
if (null != iTileImage)
{
grDungeon.DrawImage(iTileImage, new Rectangle(ptDungeonLayoutLocation.X, ptDungeonLayoutLocation.Y, iTileImage.Width, iTileImage.Height));
}
// Add the current tile to the MAP file
if (true == bUseFullColorTiles)
{
sbBGMapEditorFileContents.AppendLine(sBGMapEditorFullColorTilePath + ";tile;" + ptDungeonLayoutLocation.X.ToString() + "x" + ptDungeonLayoutLocation.Y.ToString() + ";25");
}
else
{
sbBGMapEditorFileContents.AppendLine(sBGMapEditorTilePath + ";tile;" + ptDungeonLayoutLocation.X.ToString() + "x" + ptDungeonLayoutLocation.Y.ToString() + ";25");
}
// Add the bridge
if (null != cBridge)
{
string sBridgeTokenPath = cBridge.BGMapEditorTilePath;
Point ptBridgeLocation = new Point(ptDungeonLayoutLocation.X, ptDungeonLayoutLocation.Y);
switch (iConnectedCorridorZoneEdge)
{
case 1:
ptBridgeLocation.Offset(2 * (iWidth / 3), iHeight);
break;
case 2:
ptBridgeLocation.Offset(iWidth / 3, iHeight);
break;
case 3:
ptBridgeLocation.Offset(0, iHeight);
break;
case 4:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.Height, 2 * (iHeight / 3));
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
case 5:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.Height, iHeight / 3);
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
case 6:
// It is rotated 90 degrees, so use the Height for the X-width offset
ptBridgeLocation.Offset(-1 * cBridge.Height, 0);
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
case 7:
ptBridgeLocation.Offset(0, -1 * cBridge.Height);
break;
case 8:
ptBridgeLocation.Offset(iWidth / 3, -1 * cBridge.Height);
break;
case 9:
ptBridgeLocation.Offset(2 * (iWidth / 3), -1 * cBridge.Height);
break;
case 10:
ptBridgeLocation.Offset(iWidth, 0);
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
case 11:
ptBridgeLocation.Offset(iWidth, iHeight / 3);
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
case 12:
ptBridgeLocation.Offset(iWidth, 2 * (iHeight / 3));
sBridgeTokenPath = sBridgeTokenPath.Replace("r_0.png", "r_90.png");
break;
default:
break;
}
sbBGMapEditorFileContents.AppendLine(sBridgeTokenPath + ";chip;" + ptBridgeLocation.X.ToString() + "x" + ptBridgeLocation.Y.ToString() + ";0");
Image iBridgeImage = TokenUtilities.GetTokenImage(cBridge, false, sBridgeTokenPath);
if (null != iBridgeImage)
{
grDungeon.DrawImage(iBridgeImage, new Rectangle(ptBridgeLocation.X, ptBridgeLocation.Y, iBridgeImage.Width, iBridgeImage.Height));
}
}
// Add the start marker
int iStartZone = 0;
if (null != cStart)
{
iStartZone = TokenUtilities.DetermineFarthestZone(iConnectedCorridorZone, lstCorridorZones);
// Determine where the center of the start zone is, then offset the point so that the start token is centered in the zone
Point ptStart = TokenUtilities.DetermineZoneCenter(this, iStartZone);
ptStart.Offset(-1 * (cStart.Width / 2), -1 * (cStart.Height / 2));
sbBGMapEditorFileContents.AppendLine(cStart.BGMapEditorTilePath + ";chip;" + ptStart.X.ToString() + "x" + ptStart.Y.ToString() + ";0");
Image imgStartImage = TokenUtilities.GetTokenImage(cStart);
if (null != imgStartImage)
{
grDungeon.DrawImage(imgStartImage, new Rectangle(ptStart.X, ptStart.Y, cStart.Width, cStart.Height));
}
}
// Add the exit marker
int iExitZone = 0;
if (null != cExit)
{
iExitZone = TokenUtilities.DetermineFarthestZone(iPreviousConnectedCorridorZone, lstCorridorZones);
// Determine where the center of the exit zone is, then offset the point so that the exit token is centered in the zone
Point ptExit = TokenUtilities.DetermineZoneCenter(this, iExitZone);
ptExit.Offset(-1 * (cExit.Width / 2), -1 * (cExit.Height / 2));
sbBGMapEditorFileContents.AppendLine(cExit.BGMapEditorTilePath + ";chip;" + ptExit.X.ToString() + "x" + ptExit.Y.ToString() + ";0");
Image imgExitImage = TokenUtilities.GetTokenImage(cExit);
if (null != imgExitImage)
{
grDungeon.DrawImage(imgExitImage, new Rectangle(ptExit.X, ptExit.Y, cExit.Width, cExit.Height));
}
}
// Add the level marker
// ** The level marker must go in a cooridor
// - Give preference to the center of the tile
// - Do not put the level marker in the same zone as the start or Exit marker
int iSelectedZone = 5;
if (false == lstCorridorZones.Contains(5))
{
// randomly choose another zone, since the center of the tile is not a cooridor
ArrayList lstPossibleLevelCorridorZones = new ArrayList(lstCorridorZones);
if (null != cStart)
{
// This is a START tile, exclude the start zone
lstPossibleLevelCorridorZones.Remove(iStartZone);
}
else if (null != cExit)
{
// This is an Exit tile, exclude the start zone
lstPossibleLevelCorridorZones.Remove(iExitZone);
}
int iZoneIndex = TokenUtilities.rndGenerator.Next(0, lstPossibleLevelCorridorZones.Count);
iSelectedZone = (int)(lstPossibleLevelCorridorZones[iZoneIndex]);
}
// Determine where the center of the selected zone is, then offset the point so that the level token is centered in the zone
Point ptLevel = TokenUtilities.DetermineZoneCenter(this, iSelectedZone);
ptLevel.Offset(-1 * (cLevel.Width / 2), -1 * (cLevel.Height / 2));
sbBGMapEditorFileContents.AppendLine(cLevel.BGMapEditorTilePath + ";chip;" + ptLevel.X.ToString() + "x" + ptLevel.Y.ToString() + ";0");
Image imgLevelImage = TokenUtilities.GetTokenImage(cLevel);
if (null != imgLevelImage)
{
grDungeon.DrawImage(imgLevelImage, new Rectangle(ptLevel.X, ptLevel.Y, cLevel.Width, cLevel.Height));
}
// Add the doors
if (0 < iDoors)
{
// Get a list of all possible door locations, based upon the corridors on the tile
ArrayList lstAvailableDoorLocations = TokenUtilities.DetermineAvailableDoorLocations(lstCorridorZones);
for (int iDoorIterator = 0; iDoorIterator < iDoors; iDoorIterator++)
{
if (0 >= lstAvailableDoorLocations.Count)
{
// No available locations left
break;
}
// Determine door location
int iDoorIndex = TokenUtilities.rndGenerator.Next(0, lstAvailableDoorLocations.Count);
string sDoorToPlace = (string)(lstAvailableDoorLocations[iDoorIndex]);
// Remove the selected door placement so that it cannot be used again
lstAvailableDoorLocations.Remove(sDoorToPlace);
string[] asDoorToPlaceComponents = sDoorToPlace.Split("-".ToCharArray());
// Wastefully create a new point here, as we need to declare it outside of the If statement below
Point ptDoorLocation = new Point(ptDungeonLayoutLocation.X, ptDungeonLayoutLocation.Y);
int iDoorZone;
string sDoorTokenPath = cDoor.BGMapEditorTilePath;
if (true == int.TryParse(asDoorToPlaceComponents[0], out iDoorZone))
{
ptDoorLocation = TokenUtilities.DetermineZoneCenter(this, iDoorZone);
switch (asDoorToPlaceComponents[1])
{
case "Top":
sDoorTokenPath = sDoorTokenPath.Substring(0, sDoorTokenPath.LastIndexOf("r_0.png")) + "r_180.png";
//sDoorTokenPath = sDoorTokenPath.Replace("r_0.png", "r_180.png");
// Offset the point up so that it is at the top, middle of the current zone
ptDoorLocation.Offset(0, -1 * (this.Height / 6));
// Now offset the door location by half of the door width and height
ptDoorLocation.Offset(-1 * (cDoor.Width / 2), -1 * (cDoor.Height / 2));
break;
case "Bottom":
// Offset the point up so that it is at the bottom, middle of the current zone
ptDoorLocation.Offset(0, (this.Height / 6));
// Now offset the door location by half of the door width and height
ptDoorLocation.Offset(-1 * (cDoor.Width / 2), -1 * (cDoor.Height / 2));
break;
case "Left":
sDoorTokenPath = sDoorTokenPath.Substring(0, sDoorTokenPath.LastIndexOf("r_0.png")) + "r_90.png";
// Offset the point up so that it is at the left, middle of the current zone
ptDoorLocation.Offset(-1 * (this.Width / 6), 0);
// Now offset the door location by half of the door width and height (swap width/height since the door is to be rotated 90 degrees)
ptDoorLocation.Offset(-1 * (cDoor.Height / 2), -1 * (cDoor.Width / 2));
break;
case "Right":
default:
sDoorTokenPath = sDoorTokenPath.Substring(0, sDoorTokenPath.LastIndexOf("r_0.png")) + "r_270.png";
// Offset the point up so that it is at the right, middle of the current zone
ptDoorLocation.Offset((this.Height / 6), 0);
// Now offset the door location by half of the door width and height (swap width/height since the door is to be rotated 270 degrees)
ptDoorLocation.Offset(-1 * (cDoor.Height / 2), -1 * (cDoor.Width / 2));
break;
}
}
sbBGMapEditorFileContents.AppendLine(sDoorTokenPath + ";chip;" + ptDoorLocation.X.ToString() + "x" + ptDoorLocation.Y.ToString() + ";0");
Image imgDoorImage = TokenUtilities.GetTokenImage(cDoor, false, sDoorTokenPath);
if (null != imgDoorImage)
{
grDungeon.DrawImage(imgDoorImage, new Rectangle(ptDoorLocation.X, ptDoorLocation.Y, imgDoorImage.Width, imgDoorImage.Height));
}
}
}
}
