public L_Message(String RAW_Message, House _theHouse, Dictionary <String, IMAXDevice> OutputDeviceList)
{
DevicesInThisMessage = new List <IMAXDevice>();
if (RAW_Message.Length < 2)
{
throw new MAXException("Unable to process the RAW Message.");
}
if (!RAW_Message.StartsWith("L:"))
{
throw new MAXException("Unable to process the RAW Message. Not a L Message.");
}
RawMessageDecoded = Base64.Decode(RAW_Message.Remove(0, 2));
// Tokenize RAW Message
List <byte[]> Tokenized = TokenizeMessage.Tokenize(RawMessageDecoded);
foreach (byte[] array in Tokenized)
{
StringBuilder sb = new StringBuilder();
for (int i = 0; i <= 2; i++)
{
sb.Append(string.Format("{0:x}", array[i]).PadLeft(2, '0'));
}
// get data 1 and data 2 out
// on position 5,6
byte Data1 = array[4];
byte Data2 = array[5];
String binValueData1 = Convert.ToString(Data1, 2);
binValueData1 = binValueData1.PadLeft(8, '0');
String binValueData2 = Convert.ToString(Data2, 2);
binValueData2 = binValueData2.PadLeft(8, '0');
Int32 Cursor = 7; // the current position, skipping ?1,
String RFAddress = sb.ToString();
#region look for this RF Adress in the House's device list
List <IMAXDevice> AllDevices = _theHouse.GetAllDevices();
IMAXDevice foundDevice = null;
foreach (IMAXDevice _device in AllDevices)
{
if (_device.RFAddress == RFAddress)
{
if (_device.Type == DeviceTypes.HeatingThermostat)
{
foundDevice = new HeatingThermostat();
foundDevice.AssociatedRoom = _device.AssociatedRoom;
foundDevice.Name = _device.Name;
foundDevice.RFAddress = _device.RFAddress;
foundDevice.SerialNumber = _device.SerialNumber;
}
if (_device.Type == DeviceTypes.ShutterContact)
{
foundDevice = new ShutterContact();
foundDevice.AssociatedRoom = _device.AssociatedRoom;
foundDevice.Name = _device.Name;
foundDevice.RFAddress = _device.RFAddress;
foundDevice.SerialNumber = _device.SerialNumber;
}
break;
}
}
#endregion
if (foundDevice != null)
{
// remove the device from the house to add it later again...
DevicesInThisMessage.Add(foundDevice);
#region HeatingThermostat
if (foundDevice.Type == DeviceTypes.HeatingThermostat)
{
HeatingThermostat KnownDevice = (HeatingThermostat)foundDevice;
#region get all those flags out of Data1 and Data2
#region Valid
if (binValueData1[3] == '1')
{
KnownDevice.Valid = true;
}
else
{
KnownDevice.Valid = false;
}
#endregion
#region Error
if (binValueData1[4] == '1')
{
KnownDevice.Error = true;
}
else
{
KnownDevice.Error = false;
}
#endregion
#region IsAnswer
if (binValueData1[5] == '1')
{
KnownDevice.IsAnswer = true;
}
else
{
KnownDevice.IsAnswer = false;
}
#endregion
#region LowBattery
if (binValueData2[0] == '1')
{
KnownDevice.LowBattery = true;
}
else
{
KnownDevice.LowBattery = false;
}
#endregion
#region LinkError
if (binValueData2[1] == '1')
{
KnownDevice.LinkError = true;
}
else
{
KnownDevice.LinkError = false;
}
#endregion
#region PanelLock
if (binValueData2[2] == '1')
{
KnownDevice.PanelLock = true;
}
else
{
KnownDevice.PanelLock = false;
}
#endregion
#region GatewayOK
if (binValueData2[3] == '1')
{
KnownDevice.GatewayOK = true;
}
else
{
KnownDevice.GatewayOK = false;
}
#endregion
#region Mode
String ModeValue = binValueData2[6] + "" + binValueData2[7];
switch (ModeValue)
{
case "00":
KnownDevice.Mode = ThermostatModes.automatic;
break;
case "01":
KnownDevice.Mode = ThermostatModes.manual;
break;
case "10":
KnownDevice.Mode = ThermostatModes.vacation;
break;
case "11":
KnownDevice.Mode = ThermostatModes.boost;
break;
default:
break;
}
#endregion
#endregion
// hurray, we've got a device we know how to handle B-)
((HeatingThermostat)foundDevice).Temperature = (double)array[Cursor] / 2;
Cursor++;
OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
}
#endregion
#region ShutterContact
if (foundDevice.Type == DeviceTypes.ShutterContact)
{
ShutterContact KnownDevice = (ShutterContact)foundDevice;
#region get all those flags out of Data1 and Data2
#region Valid
if (binValueData1[3] == '1')
{
KnownDevice.Valid = true;
}
else
{
KnownDevice.Valid = false;
}
#endregion
#region Error
if (binValueData1[4] == '1')
{
KnownDevice.Error = true;
}
else
{
KnownDevice.Error = false;
}
#endregion
#region IsAnswer
if (binValueData1[5] == '1')
{
KnownDevice.IsAnswer = true;
}
else
{
KnownDevice.IsAnswer = false;
}
#endregion
#region LowBattery
if (binValueData2[0] == '1')
{
KnownDevice.LowBattery = true;
}
else
{
KnownDevice.LowBattery = false;
}
#endregion
#region LinkError
if (binValueData2[1] == '1')
{
KnownDevice.LinkError = true;
}
else
{
KnownDevice.LinkError = false;
}
#endregion
#region PanelLock
if (binValueData2[2] == '1')
{
KnownDevice.PanelLock = true;
}
else
{
KnownDevice.PanelLock = false;
}
#endregion
#region GatewayOK
if (binValueData2[3] == '1')
{
KnownDevice.GatewayOK = true;
}
else
{
KnownDevice.GatewayOK = false;
}
#endregion
#region Mode
String ModeValue = binValueData2[6] + "" + binValueData2[7];
switch (ModeValue)
{
case "00":
KnownDevice.ShutterState = ShutterContactModes.closed;
break;
case "10":
KnownDevice.ShutterState = ShutterContactModes.open;
break;
default:
break;
}
#endregion
#endregion
OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
}
#endregion
}
}
}
public L_Message(String RAW_Message, House _theHouse, Dictionary<String,IMAXDevice> OutputDeviceList)
{
DevicesInThisMessage = new List<IMAXDevice>();
if (RAW_Message.Length < 2)
throw new MAXException("Unable to process the RAW Message.");
if (!RAW_Message.StartsWith("L:"))
throw new MAXException("Unable to process the RAW Message. Not a L Message.");
RawMessageDecoded = Base64.Decode(RAW_Message.Remove(0,2));
// Tokenize RAW Message
List<byte[]> Tokenized = TokenizeMessage.Tokenize(RawMessageDecoded);
foreach(byte[] array in Tokenized)
{
StringBuilder sb = new StringBuilder();
for(int i=0;i<=2;i++)
{
sb.Append(string.Format("{0:x}", array[i]).PadLeft(2, '0'));
}
// get data 1 and data 2 out
// on position 5,6
byte Data1 = array[4];
byte Data2 = array[5];
String binValueData1 = Convert.ToString(Data1,2);
binValueData1 = binValueData1.PadLeft(8, '0');
String binValueData2 = Convert.ToString(Data2,2);
binValueData2 = binValueData2.PadLeft(8, '0');
Int32 Cursor = 7; // the current position, skipping ?1,
String RFAddress = sb.ToString();
#region look for this RF Adress in the House's device list
List<IMAXDevice> AllDevices = _theHouse.GetAllDevices();
IMAXDevice foundDevice = null;
foreach(IMAXDevice _device in AllDevices)
{
if (_device.RFAddress == RFAddress)
{
if (_device.Type == DeviceTypes.HeatingThermostat)
{
foundDevice = new HeatingThermostat();
foundDevice.AssociatedRoom = _device.AssociatedRoom;
foundDevice.Name = _device.Name;
foundDevice.RFAddress = _device.RFAddress;
foundDevice.SerialNumber = _device.SerialNumber;
}
if (_device.Type == DeviceTypes.ShutterContact)
{
foundDevice = new ShutterContact();
foundDevice.AssociatedRoom = _device.AssociatedRoom;
foundDevice.Name = _device.Name;
foundDevice.RFAddress = _device.RFAddress;
foundDevice.SerialNumber = _device.SerialNumber;
}
break;
}
}
#endregion
if (foundDevice != null)
{
// remove the device from the house to add it later again...
DevicesInThisMessage.Add(foundDevice);
#region HeatingThermostat
if (foundDevice.Type == DeviceTypes.HeatingThermostat)
{
HeatingThermostat KnownDevice = (HeatingThermostat)foundDevice;
#region get all those flags out of Data1 and Data2
#region Valid
if (binValueData1[3] == '1')
KnownDevice.Valid = true;
else
KnownDevice.Valid = false;
#endregion
#region Error
if (binValueData1[4] == '1')
KnownDevice.Error = true;
else
KnownDevice.Error = false;
#endregion
#region IsAnswer
if (binValueData1[5] == '1')
KnownDevice.IsAnswer = true;
else
KnownDevice.IsAnswer = false;
#endregion
#region LowBattery
if (binValueData2[0] == '1')
KnownDevice.LowBattery = true;
else
KnownDevice.LowBattery = false;
#endregion
#region LinkError
if (binValueData2[1] == '1')
KnownDevice.LinkError = true;
else
KnownDevice.LinkError = false;
#endregion
#region PanelLock
if (binValueData2[2] == '1')
KnownDevice.PanelLock = true;
else
KnownDevice.PanelLock = false;
#endregion
#region GatewayOK
if (binValueData2[3] == '1')
KnownDevice.GatewayOK = true;
else
KnownDevice.GatewayOK = false;
#endregion
#region Mode
String ModeValue = binValueData2[6]+""+binValueData2[7];
switch(ModeValue)
{
case "00":
KnownDevice.Mode = ThermostatModes.automatic;
break;
case "01":
KnownDevice.Mode = ThermostatModes.manual;
break;
case "10":
KnownDevice.Mode = ThermostatModes.vacation;
break;
case "11":
KnownDevice.Mode = ThermostatModes.boost;
break;
default:
break;
}
#endregion
#endregion
// hurray, we've got a device we know how to handle B-)
((HeatingThermostat)foundDevice).Temperature = (double)array[Cursor]/2;
Cursor++;
OutputDeviceList.Add(KnownDevice.SerialNumber,KnownDevice);
}
#endregion
#region ShutterContact
if (foundDevice.Type == DeviceTypes.ShutterContact)
{
ShutterContact KnownDevice = (ShutterContact)foundDevice;
#region get all those flags out of Data1 and Data2
#region Valid
if (binValueData1[3] == '1')
KnownDevice.Valid = true;
else
KnownDevice.Valid = false;
#endregion
#region Error
if (binValueData1[4] == '1')
KnownDevice.Error = true;
else
KnownDevice.Error = false;
#endregion
#region IsAnswer
if (binValueData1[5] == '1')
KnownDevice.IsAnswer = true;
else
KnownDevice.IsAnswer = false;
#endregion
#region LowBattery
if (binValueData2[0] == '1')
KnownDevice.LowBattery = true;
else
KnownDevice.LowBattery = false;
#endregion
#region LinkError
if (binValueData2[1] == '1')
KnownDevice.LinkError = true;
else
KnownDevice.LinkError = false;
#endregion
#region PanelLock
if (binValueData2[2] == '1')
KnownDevice.PanelLock = true;
else
KnownDevice.PanelLock = false;
#endregion
#region GatewayOK
if (binValueData2[3] == '1')
KnownDevice.GatewayOK = true;
else
KnownDevice.GatewayOK = false;
#endregion
#region Mode
String ModeValue = binValueData2[6]+""+binValueData2[7];
switch(ModeValue)
{
case "00":
KnownDevice.ShutterState = ShutterContactModes.closed;
break;
case "10":
KnownDevice.ShutterState = ShutterContactModes.open;
break;
default:
break;
}
#endregion
#endregion
OutputDeviceList.Add(KnownDevice.SerialNumber, KnownDevice);
}
#endregion
}
#endregion Constructors
#region Properties
public MAXMessageType MessageType
{
get
{
return MAXMessageType.C;
}
}
