public MySettings Load(string fileName)
{
try
{
MySettings settings = new MySettings();
if (File.Exists(fileName))
{
settings = (new JavaScriptSerializer()).Deserialize <MySettings>(File.ReadAllText(fileName));
return(settings);
}
// else case and the copy routine to be depreciated!
else
{
MainForm.ShowMessageBox(
"Saved application settings not found, copying defaults.",
"Settings not loaded",
MessageBoxButtons.OK);
settings = CopySettings();
return(settings);
}
}
catch (System.Exception excep)
{
MainForm.ShowMessageBox(
"Problem loading application settings:\n" + excep.Message + "\nUsing built in defaults.",
"Settings not loaded",
MessageBoxButtons.OK);
MySettings s = new MySettings();
return(s);
}
}
public bool Save(MySettings pSettings, string fileName)
{
try
{
File.WriteAllText(fileName, (new JavaScriptSerializer()).Serialize(pSettings));
return(true);
}
catch (System.Exception excep)
{
MainForm.DisplayText("Application settings save failed: " + excep.Message);
return(false);
}
}
public bool Save(MySettings pSettings, string FileName)
{
try
{
MainForm.DisplayText("Writing " + FileName);
File.WriteAllText(FileName, JsonConvert.SerializeObject(pSettings, Formatting.Indented));
return(true);
}
catch (System.Exception excep)
{
MainForm.DisplayText("Application settings save failed: " + excep.Message);
return(false);
}
}
public MySettings Load(string FileName)
{
try
{
#if TRANSFER
TransferSettings(FileName); // does not return
// in case it does:
MainForm.ShowMessageBox(
"TransferSettings(FileName) returned!\n" +
"Please report this issue to [email protected].",
"Sloppy progrfammer error",
MessageBoxButtons.OK);
Application.Exit();
#endif
MySettings settings = new MySettings();
if (File.Exists(FileName))
{
MainForm.DisplayText("Reading " + FileName);
settings = JsonConvert.DeserializeObject <MySettings>(File.ReadAllText(FileName));
return(settings);
}
else
{
DialogResult dialogResult = MainForm.ShowMessageBox(
"SAVED SETTINGS FILE NOT FOUND. \n\n" +
"If this is the first time you are running this program, this is expected. " +
"Click OK, startup continues and the program uses built-in default values.\n\n" +
"If you are updating from an earlier version, click cancel now, " +
"then run the settings transfer program." +
"Please see https://www.liteplacer.com/downloads/ for instructions and download link.",
"Settings file not found", MessageBoxButtons.OKCancel);
if (dialogResult == DialogResult.Cancel)
{
Environment.Exit(0);
}
return(settings);
}
}
catch (System.Exception excep)
{
MainForm.ShowMessageBox(
"Problem loading application settings:\n" + excep.Message + "\nUsing built in defaults.",
"Settings not loaded",
MessageBoxButtons.OK);
MySettings s = new MySettings();
return(s);
}
}
private void CopySettings(string FileName)
{
try
{
Properties.Settings.Default.Upgrade();
MySettings s = new MySettings();
s.Cameras_KeepActive = Properties.Settings.Default.Cameras_KeepActive;
s.Cameras_RobustSwitch = Properties.Settings.Default.Cameras_RobustSwitch;
s.CNC_AltJogSpeed = Properties.Settings.Default.CNC_AltJogSpeed;
s.CNC_AspeedMax = Properties.Settings.Default.CNC_AspeedMax;
s.CNC_CtlrJogSpeed = Properties.Settings.Default.CNC_CtlrJogSpeed;
s.CNC_EnableMouseWheelJog = Properties.Settings.Default.CNC_EnableMouseWheelJog;
s.CNC_EnableNumPadJog = Properties.Settings.Default.CNC_EnableNumPadJog;
s.CNC_NormalJogSpeed = Properties.Settings.Default.CNC_NormalJogSpeed;
s.CNC_SerialPort = Properties.Settings.Default.CNC_SerialPort;
s.CNC_SlackCompensation = Properties.Settings.Default.CNC_SlackCompensation;
s.CNC_SlackCompensationA = Properties.Settings.Default.CNC_SlackCompensationA;
s.CNC_SmallMovementSpeed = Properties.Settings.Default.CNC_SmallMovementSpeed;
s.CNC_SquareCorrection = Properties.Settings.Default.CNC_SquareCorrection;
s.CNC_ZspeedMax = Properties.Settings.Default.CNC_ZspeedMax;
s.DownCam_DrawTicks = Properties.Settings.Default.DownCam_DrawTicks;
s.DownCam_index = Properties.Settings.Default.DownCam_index;
s.Downcam_InvertedHomeMark = Properties.Settings.Default.Downcam_InvertedHomeMark;
s.DownCam_MeasurementDelay = Properties.Settings.Default.DownCam_MeasurementDelay;
s.DownCam_NozzleOffsetX = Properties.Settings.Default.DownCam_NozzleOffsetX;
s.DownCam_NozzleOffsetY = Properties.Settings.Default.DownCam_NozzleOffsetY;
s.DownCam_SnapshotColor = Properties.Settings.Default.DownCam_SnapshotColor;
s.DownCam_XmmPerPixel = Properties.Settings.Default.DownCam_XmmPerPixel;
s.DownCam_YmmPerPixel = Properties.Settings.Default.DownCam_YmmPerPixel;
s.DownCam_Zoom = Properties.Settings.Default.DownCam_Zoom;
s.DownCam_Zoomfactor = Properties.Settings.Default.DownCam_Zoomfactor;
s.DowncamMoniker = Properties.Settings.Default.DowncamMoniker;
s.General_BelowPCB_Allowance = Properties.Settings.Default.General_BelowPCB_Allowance;
s.General_CheckForUpdates = Properties.Settings.Default.General_CheckForUpdates;
s.General_JigOffsetX = Properties.Settings.Default.General_JigOffsetX;
s.General_JigOffsetY = Properties.Settings.Default.General_JigOffsetY;
s.General_MachineSizeX = Properties.Settings.Default.General_MachineSizeX;
s.General_MachineSizeY = Properties.Settings.Default.General_MachineSizeY;
s.General_Mark1Name = Properties.Settings.Default.General_Mark1Name;
s.General_Mark1X = Properties.Settings.Default.General_Mark1X;
s.General_Mark1Y = Properties.Settings.Default.General_Mark1Y;
s.General_Mark2Name = Properties.Settings.Default.General_Mark2Name;
s.General_Mark2X = Properties.Settings.Default.General_Mark2X;
s.General_Mark2Y = Properties.Settings.Default.General_Mark2Y;
s.General_Mark3Name = Properties.Settings.Default.General_Mark3Name;
s.General_Mark3X = Properties.Settings.Default.General_Mark3X;
s.General_Mark3Y = Properties.Settings.Default.General_Mark3Y;
s.General_Mark4Name = Properties.Settings.Default.General_Mark4Name;
s.General_Mark4X = Properties.Settings.Default.General_Mark4X;
s.General_Mark4Y = Properties.Settings.Default.General_Mark4Y;
s.General_Mark5Name = Properties.Settings.Default.General_Mark5Name;
s.General_Mark5X = Properties.Settings.Default.General_Mark5X;
s.General_Mark5Y = Properties.Settings.Default.General_Mark5Y;
s.General_Mark6Name = Properties.Settings.Default.General_Mark6Name;
s.General_Mark6X = Properties.Settings.Default.General_Mark6X;
s.General_Mark6Y = Properties.Settings.Default.General_Mark6Y;
s.General_MediumSpeed = Properties.Settings.Default.General_MediumSpeed;
s.General_MuteLogging = Properties.Settings.Default.General_MuteLogging;
s.General_ParkX = Properties.Settings.Default.General_ParkX;
s.General_ParkY = Properties.Settings.Default.General_ParkY;
s.General_PickupCenterX = Properties.Settings.Default.General_PickupCenterX;
s.General_PickupCenterY = Properties.Settings.Default.General_PickupCenterY;
s.General_PickupReleaseTime = Properties.Settings.Default.General_PickupReleaseTime;
s.General_PickupVacuumTime = Properties.Settings.Default.General_PickupVacuumTime;
s.General_PlacementBackOff = Properties.Settings.Default.General_PlacementBackOff;
s.General_ShadeGuard_mm = Properties.Settings.Default.General_ShadeGuard_mm;
s.General_UpgradeRequired = Properties.Settings.Default.General_UpgradeRequired;
s.General_ZprobingHysteresis = Properties.Settings.Default.General_ZprobingHysteresis;
s.General_ZTestTravel = Properties.Settings.Default.General_ZTestTravel;
s.General_ZtoPCB = Properties.Settings.Default.General_ZtoPCB;
s.Job_Xoffset = Properties.Settings.Default.Job_Xoffset;
s.Job_Yoffset = Properties.Settings.Default.Job_Yoffset;
s.Nozzles_AfullSpeed = Properties.Settings.Default.Nozzles_AfullSpeed;
s.Nozzles_Aspeed = Properties.Settings.Default.Nozzles_Aspeed;
s.Nozzles_CalibrationDistance = Properties.Settings.Default.Nozzles_CalibrationDistance;
s.Nozzles_CalibrationMaxSize = Properties.Settings.Default.Nozzles_CalibrationMaxSize;
s.Nozzles_CalibrationMinSize = Properties.Settings.Default.Nozzles_CalibrationMinSize;
s.Nozzles_count = Properties.Settings.Default.Nozzles_count;
s.Nozzles_current = Properties.Settings.Default.Nozzles_current;
s.Nozzles_default = Properties.Settings.Default.Nozzles_default;
s.Nozzles_Enabled = Properties.Settings.Default.Nozzles_Enabled;
s.Nozzles_FirstMoveFullSpeed = Properties.Settings.Default.Nozzles_FirstMoveFullSpeed;
s.Nozzles_FirstMoveSlackCompensation = Properties.Settings.Default.Nozzles_FirstMoveSlackCompensation;
s.Nozzles_LastMoveFullSpeed = Properties.Settings.Default.Nozzles_LastMoveFullSpeed;
s.Nozzles_maximum = Properties.Settings.Default.Nozzles_maximum;
s.Nozzles_Timeout = Properties.Settings.Default.Nozzles_Timeout;
s.Nozzles_XYfullSpeed = Properties.Settings.Default.Nozzles_XYfullSpeed;
s.Nozzles_XYspeed = Properties.Settings.Default.Nozzles_XYspeed;
s.Nozzles_ZfullSpeed = Properties.Settings.Default.Nozzles_ZfullSpeed;
s.Nozzles_Zspeed = Properties.Settings.Default.Nozzles_Zspeed;
s.Panel_UseBoardFids = Properties.Settings.Default.Panel_UseBoardFids;
s.Panel_XFirstOffset = Properties.Settings.Default.Panel_XFirstOffset;
s.Panel_XIncrement = Properties.Settings.Default.Panel_XIncrement;
s.Panel_XRepeats = Properties.Settings.Default.Panel_XRepeats;
s.Panel_YFirstOffset = Properties.Settings.Default.Panel_YFirstOffset;
s.Panel_YIncrement = Properties.Settings.Default.Panel_YIncrement;
s.Panel_YRepeats = Properties.Settings.Default.Panel_YRepeats;
s.Placement_Depth = Properties.Settings.Default.Placement_Depth;
s.Placement_FiducialConfirmation = Properties.Settings.Default.Placement_FiducialConfirmation;
s.Placement_FiducialsType = Properties.Settings.Default.Placement_FiducialsType;
s.Placement_FiducialTolerance = Properties.Settings.Default.Placement_FiducialTolerance;
s.Placement_OmitNozzleCalibration = Properties.Settings.Default.Placement_OmitNozzleCalibration;
s.Placement_SkipMeasurements = Properties.Settings.Default.Placement_SkipMeasurements;
s.Placement_UpdateJobGridAtRuntime = Properties.Settings.Default.Placement_UpdateJobGridAtRuntime;
s.UpCam_index = Properties.Settings.Default.UpCam_index;
s.UpCam_MeasurementDelay = Properties.Settings.Default.UpCam_MeasurementDelay;
s.UpCam_PositionX = Properties.Settings.Default.UpCam_PositionX;
s.UpCam_PositionY = Properties.Settings.Default.UpCam_PositionY;
s.UpCam_SnapshotColor = Properties.Settings.Default.UpCam_SnapshotColor;
s.UpCam_XmmPerPixel = Properties.Settings.Default.UpCam_XmmPerPixel;
s.UpCam_YmmPerPixel = Properties.Settings.Default.UpCam_YmmPerPixel;
s.UpCam_Zoom = Properties.Settings.Default.UpCam_Zoom;
s.UpCam_Zoomfactor = Properties.Settings.Default.UpCam_Zoomfactor;
s.UpcamMoniker = Properties.Settings.Default.UpcamMoniker;
if (Save(s, FileName))
{
MainForm.ShowMessageBox(
"New format settings file created.\n" +
"You can now update the software.",
"Settings saved",
MessageBoxButtons.OK);
}
}
catch (System.Exception excep)
{
MainForm.ShowMessageBox(
"Problem saving the new format file:\n" + excep.Message + "\n",
"Problem in save",
MessageBoxButtons.OK);
}
Environment.Exit(0);
}
private static MySettings CopySettings()
{
MySettings s = new MySettings();
s.Cameras_KeepActive = Properties.Settings.Default.Cameras_KeepActive;
s.Cameras_RobustSwitch = Properties.Settings.Default.Cameras_RobustSwitch;
s.CNC_AltJogSpeed = Properties.Settings.Default.CNC_AltJogSpeed;
s.CNC_AspeedMax = Properties.Settings.Default.CNC_AspeedMax;
s.CNC_CtlrJogSpeed = Properties.Settings.Default.CNC_CtlrJogSpeed;
s.CNC_EnableMouseWheelJog = Properties.Settings.Default.CNC_EnableMouseWheelJog;
s.CNC_EnableNumPadJog = Properties.Settings.Default.CNC_EnableNumPadJog;
s.CNC_NormalJogSpeed = Properties.Settings.Default.CNC_NormalJogSpeed;
s.CNC_SerialPort = Properties.Settings.Default.CNC_SerialPort;
s.CNC_SlackCompensation = Properties.Settings.Default.CNC_SlackCompensation;
s.CNC_SlackCompensationA = Properties.Settings.Default.CNC_SlackCompensationA;
s.CNC_SmallMovementSpeed = Properties.Settings.Default.CNC_SmallMovementSpeed;
s.CNC_SquareCorrection = Properties.Settings.Default.CNC_SquareCorrection;
s.CNC_ZspeedMax = Properties.Settings.Default.CNC_ZspeedMax;
s.DownCam_DrawTicks = Properties.Settings.Default.DownCam_DrawTicks;
s.DownCam_index = Properties.Settings.Default.DownCam_index;
s.Downcam_InvertedHomeMark = Properties.Settings.Default.Downcam_InvertedHomeMark;
s.DownCam_MeasurementDelay = Properties.Settings.Default.DownCam_MeasurementDelay;
s.DownCam_NozzleOffsetX = Properties.Settings.Default.DownCam_NozzleOffsetX;
s.DownCam_NozzleOffsetY = Properties.Settings.Default.DownCam_NozzleOffsetY;
s.DownCam_SnapshotColor = Properties.Settings.Default.DownCam_SnapshotColor;
s.DownCam_XmmPerPixel = Properties.Settings.Default.DownCam_XmmPerPixel;
s.DownCam_YmmPerPixel = Properties.Settings.Default.DownCam_YmmPerPixel;
s.DownCam_Zoom = Properties.Settings.Default.DownCam_Zoom;
s.DownCam_Zoomfactor = Properties.Settings.Default.DownCam_Zoomfactor;
s.DowncamMoniker = Properties.Settings.Default.DowncamMoniker;
s.General_BelowPCB_Allowance = Properties.Settings.Default.General_BelowPCB_Allowance;
s.General_CheckForUpdates = Properties.Settings.Default.General_CheckForUpdates;
s.General_JigOffsetX = Properties.Settings.Default.General_JigOffsetX;
s.General_JigOffsetY = Properties.Settings.Default.General_JigOffsetY;
s.General_MachineSizeX = Properties.Settings.Default.General_MachineSizeX;
s.General_MachineSizeY = Properties.Settings.Default.General_MachineSizeY;
s.General_Mark1Name = Properties.Settings.Default.General_Mark1Name;
s.General_Mark1X = Properties.Settings.Default.General_Mark1X;
s.General_Mark1Y = Properties.Settings.Default.General_Mark1Y;
s.General_Mark2Name = Properties.Settings.Default.General_Mark2Name;
s.General_Mark2X = Properties.Settings.Default.General_Mark2X;
s.General_Mark2Y = Properties.Settings.Default.General_Mark2Y;
s.General_Mark3Name = Properties.Settings.Default.General_Mark3Name;
s.General_Mark3X = Properties.Settings.Default.General_Mark3X;
s.General_Mark3Y = Properties.Settings.Default.General_Mark3Y;
s.General_Mark4Name = Properties.Settings.Default.General_Mark4Name;
s.General_Mark4X = Properties.Settings.Default.General_Mark4X;
s.General_Mark4Y = Properties.Settings.Default.General_Mark4Y;
s.General_Mark5Name = Properties.Settings.Default.General_Mark5Name;
s.General_Mark5X = Properties.Settings.Default.General_Mark5X;
s.General_Mark5Y = Properties.Settings.Default.General_Mark5Y;
s.General_Mark6Name = Properties.Settings.Default.General_Mark6Name;
s.General_Mark6X = Properties.Settings.Default.General_Mark6X;
s.General_Mark6Y = Properties.Settings.Default.General_Mark6Y;
s.General_MediumSpeed = Properties.Settings.Default.General_MediumSpeed;
s.General_MuteLogging = Properties.Settings.Default.General_MuteLogging;
s.General_ParkX = Properties.Settings.Default.General_ParkX;
s.General_ParkY = Properties.Settings.Default.General_ParkY;
s.General_PickupCenterX = Properties.Settings.Default.General_PickupCenterX;
s.General_PickupCenterY = Properties.Settings.Default.General_PickupCenterY;
s.General_PickupReleaseTime = Properties.Settings.Default.General_PickupReleaseTime;
s.General_PickupVacuumTime = Properties.Settings.Default.General_PickupVacuumTime;
s.General_PlacementBackOff = Properties.Settings.Default.General_PlacementBackOff;
s.General_ShadeGuard_mm = Properties.Settings.Default.General_ShadeGuard_mm;
s.General_UpgradeRequired = Properties.Settings.Default.General_UpgradeRequired;
s.General_ZprobingHysteresis = Properties.Settings.Default.General_ZprobingHysteresis;
s.General_ZTestTravel = Properties.Settings.Default.General_ZTestTravel;
s.General_ZtoPCB = Properties.Settings.Default.General_ZtoPCB;
s.Job_Xoffset = Properties.Settings.Default.Job_Xoffset;
s.Job_Yoffset = Properties.Settings.Default.Job_Yoffset;
s.Nozzles_AfullSpeed = Properties.Settings.Default.Nozzles_AfullSpeed;
s.Nozzles_Aspeed = Properties.Settings.Default.Nozzles_Aspeed;
s.Nozzles_CalibrationDistance = Properties.Settings.Default.Nozzles_CalibrationDistance;
s.Nozzles_CalibrationMaxSize = Properties.Settings.Default.Nozzles_CalibrationMaxSize;
s.Nozzles_CalibrationMinSize = Properties.Settings.Default.Nozzles_CalibrationMinSize;
s.Nozzles_count = Properties.Settings.Default.Nozzles_count;
s.Nozzles_current = Properties.Settings.Default.Nozzles_current;
s.Nozzles_default = Properties.Settings.Default.Nozzles_default;
s.Nozzles_Enabled = Properties.Settings.Default.Nozzles_Enabled;
s.Nozzles_FirstMoveFullSpeed = Properties.Settings.Default.Nozzles_FirstMoveFullSpeed;
s.Nozzles_FirstMoveSlackCompensation = Properties.Settings.Default.Nozzles_FirstMoveSlackCompensation;
s.Nozzles_LastMoveFullSpeed = Properties.Settings.Default.Nozzles_LastMoveFullSpeed;
s.Nozzles_maximum = Properties.Settings.Default.Nozzles_maximum;
s.Nozzles_Timeout = Properties.Settings.Default.Nozzles_Timeout;
s.Nozzles_XYfullSpeed = Properties.Settings.Default.Nozzles_XYfullSpeed;
s.Nozzles_XYspeed = Properties.Settings.Default.Nozzles_XYspeed;
s.Nozzles_ZfullSpeed = Properties.Settings.Default.Nozzles_ZfullSpeed;
s.Nozzles_Zspeed = Properties.Settings.Default.Nozzles_Zspeed;
s.Panel_UseBoardFids = Properties.Settings.Default.Panel_UseBoardFids;
s.Panel_XFirstOffset = Properties.Settings.Default.Panel_XFirstOffset;
s.Panel_XIncrement = Properties.Settings.Default.Panel_XIncrement;
s.Panel_XRepeats = Properties.Settings.Default.Panel_XRepeats;
s.Panel_YFirstOffset = Properties.Settings.Default.Panel_YFirstOffset;
s.Panel_YIncrement = Properties.Settings.Default.Panel_YIncrement;
s.Panel_YRepeats = Properties.Settings.Default.Panel_YRepeats;
s.Placement_Depth = Properties.Settings.Default.Placement_Depth;
s.Placement_FiducialConfirmation = Properties.Settings.Default.Placement_FiducialConfirmation;
s.Placement_FiducialsType = Properties.Settings.Default.Placement_FiducialsType;
s.Placement_FiducialTolerance = Properties.Settings.Default.Placement_FiducialTolerance;
s.Placement_OmitNozzleCalibration = Properties.Settings.Default.Placement_OmitNozzleCalibration;
s.Placement_SkipMeasurements = Properties.Settings.Default.Placement_SkipMeasurements;
s.Placement_UpdateJobGridAtRuntime = Properties.Settings.Default.Placement_UpdateJobGridAtRuntime;
s.TinyG_a = Properties.Settings.Default.TinyG_a;
s.TinyG_m1 = Properties.Settings.Default.TinyG_m1;
s.TinyG_m2 = Properties.Settings.Default.TinyG_m2;
s.TinyG_m3 = Properties.Settings.Default.TinyG_m3;
s.TinyG_m4 = Properties.Settings.Default.TinyG_m4;
s.TinyG_settings_saved = Properties.Settings.Default.TinyG_settings_saved;
s.TinyG_sys = Properties.Settings.Default.TinyG_sys;
s.TinyG_x = Properties.Settings.Default.TinyG_x;
s.TinyG_y = Properties.Settings.Default.TinyG_y;
s.TinyG_z = Properties.Settings.Default.TinyG_z;
s.UpCam_index = Properties.Settings.Default.UpCam_index;
s.UpCam_MeasurementDelay = Properties.Settings.Default.UpCam_MeasurementDelay;
s.UpCam_PositionX = Properties.Settings.Default.UpCam_PositionX;
s.UpCam_PositionY = Properties.Settings.Default.UpCam_PositionY;
s.UpCam_SnapshotColor = Properties.Settings.Default.UpCam_SnapshotColor;
s.UpCam_XmmPerPixel = Properties.Settings.Default.UpCam_XmmPerPixel;
s.UpCam_YmmPerPixel = Properties.Settings.Default.UpCam_YmmPerPixel;
s.UpCam_Zoom = Properties.Settings.Default.UpCam_Zoom;
s.UpCam_Zoomfactor = Properties.Settings.Default.UpCam_Zoomfactor;
s.UpcamMoniker = Properties.Settings.Default.UpcamMoniker;
return(s);
}
