/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Parses out the line and gets the required information from it
/// </summary>
/// <param name="processedLineStr">a line string without block terminator or format parameters</param>
/// <param name="stateMachine">The state machine containing the implied modal values</param>
/// <returns>z success, nz fail</returns>
public override int ParseLine(string processedLineStr, ExcellonFileStateMachine stateMachine)
{
int outInt = -1;
int nextStartPos = 0;
bool retBool;
//DebugMessage("Excellon ParseLine(TChange) started");
if (processedLineStr == null)
{
return(100);
}
if (processedLineStr.StartsWith("T") == false)
{
return(200);
}
// now the TCode line will have an T tag
// LOOK FOR THE T TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'T', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// this is not an error - just means we did not find one
}
else
{
// this will have a integer number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetInteger(processedLineStr, nextStartPos, ref outInt, ref nextStartPos);
if (retBool != true)
{
LogMessage("Excellon ParseLine(T) failed on call to ParseNumberFromString_TillNonDigit_RetInteger");
return(333);
}
else
{
// set the value now
toolNumber = outInt;
}
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Parses out the line and gets the required information from it
/// </summary>
/// <param name="processedLineStr">a line string without block terminator or format parameters</param>
/// <param name="stateMachine">The state machine containing the implied modal values</param>
/// <returns>z success, nz fail</returns>
public override int ParseLine(string processedLineStr, ExcellonFileStateMachine stateMachine)
{
int outInt = -1;
int nextStartPos = 0;
bool retBool;
//DebugMessage("Excellon ParseLine(M) started");
if (processedLineStr == null)
{
return(100);
}
if (processedLineStr.StartsWith("G") == false)
{
return(200);
}
// now the GCode line will have an G tag
// LOOK FOR THE G TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'G', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// this is not an error - just means we did not find one
LogMessage("Excellon ParseLine(G) failed on call to FindCharacterReturnNextPos no next char found.");
return(101);
}
else
{
// this will have a integer number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetInteger(processedLineStr, nextStartPos, ref outInt, ref nextStartPos);
if (retBool != true)
{
LogMessage("Excellon ParseLine(G) failed on call to ParseNumberFromString_TillNonDigit_RetInteger");
return(333);
}
else
{
// set the value now
currentGCode = outInt;
}
// validate the GCode
switch (currentGCode)
{
case 0:
// this is not ok, it is Rout Mode
LogMessage("Excellon ParseLine(G) code G00, routing mode is not supported");
return(1091);
case 5:
// this is ok, it is just Drill Mode
return(0);
case 90:
// this is ok, it is just absolute mode
return(0);
case 91:
// this is not ok, it is incrememtal mode
LogMessage("Excellon ParseLine(G) code G91, incremental mode is not supported");
return(1095);
default:
LogMessage("Excellon ParseLine(G) unknown code G" + CurrentGCode.ToString());
return(102);
}
}
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Parses out the line and gets the required information from it
/// </summary>
/// <param name="processedLineStr">a line string without block terminator or format parameters</param>
/// <param name="stateMachine">The state machine containing the implied modal values</param>
/// <returns>z success, nz fail</returns>
public override int ParseLine(string processedLineStr, GerberFileStateMachine stateMachine)
{
int outInt = -1;
int nextStartPos = 0;
bool retBool;
//LogMessage("ParseLine(G) started");
if (processedLineStr == null)
{
return(100);
}
if (processedLineStr.StartsWith("G") == false)
{
return(200);
}
// now the GCode line will have an G tag
// LOOK FOR THE G TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'G', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// this is an error - we have to find one
LogMessage("ParseLine(G) failed on call to FindCharacterReturnNextPos");
return(332);
}
// this will have a float number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetInteger(processedLineStr, nextStartPos, ref outInt, ref nextStartPos);
if (retBool != true)
{
LogMessage("ParseLine(G) failed on call to ParseNumberFromString_TillNonDigit_RetInteger");
return(333);
}
switch (outInt)
{
case 1:
{
// This is just an linear interpolation
currentGCode = outInt;
break;
}
case 4:
{
// This is just an Ignore data block we can just ignore its contents
// set the value now
currentGCode = outInt;
break;
}
case 70:
{
// This is INCHES mode
currentGCode = outInt;
stateMachine.GerberFileUnits = ApplicationUnitsEnum.INCHES;
break;
}
case 71:
{
// This is Millimeters mode
currentGCode = outInt;
stateMachine.GerberFileUnits = ApplicationUnitsEnum.MILLIMETERS;
break;
}
case 75:
{
// This is just circular interpolation enabled
// we ignore it
currentGCode = outInt;
break;
}
case 90:
{
// This is absolute coordinates enabled
currentGCode = outInt;
stateMachine.GerberFileCoordinateMode = GerberCoordinateModeEnum.COORDINATE_ABSOLUTE;
break;
}
case 91:
{
// This is incremental coordinates enabled
currentGCode = outInt;
stateMachine.GerberFileCoordinateMode = GerberCoordinateModeEnum.COORDINATE_INCREMENTAL;
break;
}
default:
{
LogMessage("ParseLine(G) failed. Unknown GCode of" + outInt.ToString());
return(334);
}
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Populate the object from an Aperture Definition pararameter
/// </summary>
/// <param name="adParamBlock">The AD string param block, no param, or block
/// delimiters. Just the AD block</param>
/// <param name="nextStartPos">the next start position after all of the ADX leading text</param>
/// <returns>z success, nz fail</returns>
public override int PopulateFromParameter(string adParamBlock, int nextStartPos)
{
float outFloat = 0;
bool retBool;
if (adParamBlock == null)
{
return(100);
}
if (adParamBlock.StartsWith(GerberFile.RS274_AD_CMD) == false)
{
return(200);
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter (C) malformed adParamBlock. No data after comma");
return(722);
}
// set this now
DefinitionBlock = adParamBlock;
// od x <XAxisHoleDimension> x <YAxisHoleDimension>
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter (Ca) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(133);
}
else
{
// set the value now
outerDiameter = outFloat;
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// we are done
return(0);
}
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(adParamBlock, 'X', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// this is not an error - just means we are all done
return(0);
}
// ###
// These are optional
// ###
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter (Ce) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(135);
}
else
{
// set the value now
HoleDiameter = outFloat;
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Parses out the line and gets the required information from it
/// </summary>
/// <param name="processedLineStr">a line string without block terminator or format parameters</param>
/// <param name="stateMachine">The state machine containing the implied modal values</param>
/// <returns>z success, nz fail</returns>
public override int ParseLine(string processedLineStr, ExcellonFileStateMachine stateMachine)
{
float outFloat = 0;
int outInt = 0;
int nextStartPos = 0;
bool retBool;
//LogMessage("ParseLine(XY) started");
if (processedLineStr == null)
{
return(100);
}
if (processedLineStr.StartsWith("R") == false)
{
return(200);
}
// now the line will have some combination of R, X and Y tags in some order
// LOOK FOR THE X TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'R', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// we have to have this
LogMessage("ParseLine(R) lineNumber=" + LineNumber.ToString() + " failed. No R repeat quantity found.");
return(3331);
}
else
{
// this will have a integer number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetInteger(processedLineStr, nextStartPos, ref outInt, ref nextStartPos);
if (retBool != true)
{
LogMessage("ParseLine(R) failed on call to ParseNumberFromString_TillNonDigit_RetInteger");
return(3332);
}
else
{
// set the value now
repeatCount = outInt;
}
}
// LOOK FOR THE X TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'X', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// we have to have this
LogMessage("ParseLine(R) lineNumber=" + LineNumber.ToString() + " failed. No X coordinate found.");
return(1331);
}
else
{
// this will have a float number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(processedLineStr, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
// just means not found
}
else
{
// set the value now
xOffset = DecimalScaleNumber(outFloat, stateMachine.ExcellonFileManager.DrillingNumberOfDecimalPlaces, stateMachine.ExcellonFileManager.DrillingCoordinateZerosMode);
}
}
// LOOK FOR THE Y TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'Y', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// just means not found
}
else
{
// this will have a float number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(processedLineStr, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("ParseLine(R) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(2332);
}
else
{
// set the value now
yOffset = DecimalScaleNumber(outFloat, stateMachine.ExcellonFileManager.DrillingNumberOfDecimalPlaces, stateMachine.ExcellonFileManager.DrillingCoordinateZerosMode);
}
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Populate the object from an Aperture Definition pararameter
/// </summary>
/// <param name="adParamBlock">The AD string param block, no param, or block
/// delimiters. Just the AD block</param>
/// <param name="nextStartPos">the next start position after all of the ADX leading text</param>
/// <returns>z success, nz fail</returns>
public override int PopulateFromParameter(string adParamBlock, int nextStartPos)
{
float outFloat = 0;
bool retBool;
if (adParamBlock == null)
{
return(100);
}
if (adParamBlock.StartsWith(GerberFile.RS274_AD_CMD) == false)
{
return(200);
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter (P) malformed adParamBlock. No data after comma");
return(722);
}
// set this now
DefinitionBlock = adParamBlock;
// OutsideDimension x NumSides X <degreesRotation> x <HoleDiameter> x <YAxisHoleDimension>
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter (Pa) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(163);
}
else
{
// set the value now
outsideDimension = outFloat;
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter (Pb) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(1631);
}
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(adParamBlock, 'X', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter (Pc) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(1631);
}
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter (Pd) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(164);
}
else
{
int workingNumSides = (int)outFloat;
if (workingNumSides < 3)
{
LogMessage("PopulateFromParameter (Pe) failed numSides < 3 is " + workingNumSides.ToString());
return(165);
}
// set the value now
numSides = workingNumSides;
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// we are done
return(0);
}
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(adParamBlock, 'X', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// this is not an error - just means we are all done
return(0);
}
// ###
// These are optional
// ###
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter (Pe) failed on call to ParseNumberFromString_TillNonDigit_RetFloat");
return(166);
}
else
{
// set the value now
DegreesRotation = outFloat;
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// this is not an error - just means we are all done
return(0);
}
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(adParamBlock, 'X', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
// this is not an error - just means we are all done
return(0);
}
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(adParamBlock, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
// this is not an error - just means we are all done
return(0);
}
else
{
// set the value now
HoleDiameter = outFloat;
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Parses out the line and gets the required information from it
/// </summary>
/// <param name="processedLineStr">a line string without block terminator or format parameters</param>
/// <param name="stateMachine">The state machine containing the implied modal values</param>
/// <returns>z success, nz fail</returns>
public override int ParseLine(string processedLineStr, GerberFileStateMachine stateMachine)
{
float outFloat = 0;
int nextStartPos = 0;
bool retBool;
LogMessage("ParseLine(OF) started");
if (processedLineStr == null)
{
return(100);
}
if (processedLineStr.StartsWith(GerberFile.RS274_OF_CMD) == false)
{
return(200);
}
// now the line will have some combination of A and B tags in some order
// LOOK FOR THE A TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'A', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// just means not found
}
else
{
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(processedLineStr, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
// this is not an error - just means we are all done
return(0);
}
else
{
// set the value now
xOffset = outFloat;
}
}
// LOOK FOR THE B TAG
nextStartPos = 0;
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(processedLineStr, 'B', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > processedLineStr.Length))
{
// just means not found
}
else
{
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetFloat(processedLineStr, nextStartPos, ref outFloat, ref nextStartPos);
if (retBool != true)
{
// this is not an error - just means we are all done
return(0);
}
else
{
// set the value now
yOffset = outFloat;
}
}
return(0);
}
/// +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
/// <summary>
/// Populate the object from an Aperture Definition prarameter
/// </summary>
/// <param name="adParamBlock">The AD string param block, no param, or block
/// delimiters. Just the AD block</param>
/// <returns>z success, nz fail</returns>
public int PopulateFromParameter(string adParamBlock)
{
//DebugMessage("PopulateFromParameter() started");
int outInt = -1;
int nextStartPos = -1;
bool retBool;
if (adParamBlock == null)
{
return(100);
}
if (adParamBlock.StartsWith(GerberFile.RS274_AD_CMD) == false)
{
return(200);
}
// convert to a character array
char[] adChars = adParamBlock.ToCharArray();
if (adChars == null)
{
return(300);
}
if (adChars.Length < 5)
{
return(400);
}
// we have to have a 'D' here to define the D number
if (adChars[2] != 'D')
{
return(200);
}
// get the D number
retBool = GerberParseUtils.ParseNumberFromString_TillNonDigit_RetInteger(adParamBlock, 3, ref outInt, ref nextStartPos);
if (retBool != true)
{
LogMessage("PopulateFromParameter failed on call to ParseNumberFromString_TillNonDigit_RetInteger");
return(322);
}
else
{
// set the dNumber now
dNumber = outInt;
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter malformed adParamBlock. No data after Dnumber");
return(422);
}
// at this point we have to take care. if the aperature definitition contains one of a
// specific set of chars then we are dealing with a normal aperture. If it does not it must
// be a named aperture referring to a macro
// set the aperture object
adCodeAperture = GetApertureObjFromString(adParamBlock.Substring(nextStartPos));
nextStartPos++;
if (adCodeAperture == null)
{
LogMessage("PopulateFromParameter failed on call to GetApertureObjFromCharacter");
return(522);
}
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
LogMessage("PopulateFromParameter malformed adParamBlock. No data after ADType");
return(622);
}
// re-sync and position just after the ',' char in the aperture parameter definition
nextStartPos = GerberParseUtils.FindCharacterReturnNextPos(adParamBlock, ',', nextStartPos);
if ((nextStartPos < 0) || (nextStartPos > adParamBlock.Length))
{
if ((adCodeAperture is GerberAperture_Macro) == false)
{
// have to have this for normal apertures
LogMessage("PopulateFromParameter malformed adParamBlock. No data after comma");
return(722);
}
else
{
// we are a macro aperture with no params
nextStartPos = adParamBlock.Length;
}
}
// now let the aperture object populate itself
int retInt = adCodeAperture.PopulateFromParameter(adParamBlock, nextStartPos);
if (retInt != 0)
{
LogMessage("PopulateFromParameter call to adCodeAperture.PopulateFromParameter returned " + retInt.ToString());
return(723);
}
return(0);
}