protected byte[] CreateRequestStatusDatagramCommon(string destinationAddress, byte[] datagram, int cemi_start_pos)
{
var i = 0;
datagram[cemi_start_pos + i++] =
ActionMessageCode != 0x00
? ActionMessageCode
: (byte)0x11;
datagram[cemi_start_pos + i++] = 0x00;
datagram[cemi_start_pos + i++] = 0xAC;
datagram[cemi_start_pos + i++] =
KnxHelper.IsAddressIndividual(destinationAddress)
? (byte)0x50
: (byte)0xF0;
datagram[cemi_start_pos + i++] = myAddress[0];
datagram[cemi_start_pos + i++] = myAddress[1];
byte[] dst_address = KnxHelper.GetAddress(destinationAddress);
datagram[cemi_start_pos + i++] = dst_address[0];
datagram[cemi_start_pos + i++] = dst_address[1];
datagram[cemi_start_pos + i++] = 0x01;
datagram[cemi_start_pos + i++] = 0x00;
datagram[cemi_start_pos + i] = 0x00;
return(datagram);
}
protected byte[] CreateActionDatagram(string destinationAddress, bool b_bit, byte[] data)
{
try
{
var dataLength = KnxHelper.GetDataLength(b_bit, data);
// HEADER
var datagram = new byte[10];
datagram[00] = 0x06;
datagram[01] = 0x10;
datagram[02] = 0x04;
datagram[03] = 0x20;
var totalLength = BitConverter.GetBytes(dataLength + 20);
datagram[04] = totalLength[1];
datagram[05] = totalLength[0];
datagram[06] = 0x04;
datagram[07] = ChannelId;
datagram[08] = IncrementSequenceNumber();
datagram[09] = 0x00;
return(CreateActionDatagramCommon(destinationAddress, b_bit, data, datagram));
}
catch
{
DecrementSingleSequenceNumber();
return(null);
}
}
private void ProcessDatagram(byte[] datagram)
{
try
{
switch (KnxHelper.GetServiceType(datagram))
{
case KnxHelper.SERVICE_TYPE.CONNECT_RESPONSE:
ProcessConnectResponse(datagram);
break;
case KnxHelper.SERVICE_TYPE.CONNECTIONSTATE_RESPONSE:
ProcessConnectionStateResponse(datagram);
break;
case KnxHelper.SERVICE_TYPE.DISCONNECT_REQUEST:
ProcessDisconnectRequest(datagram);
break;
case KnxHelper.SERVICE_TYPE.TUNNELLING_REQUEST:
ProcessDatagramHeaders(datagram);
break;
}
}
catch (Exception e)
{
Logger.Log("ProcessDatagram: Exception ({0})", e.Message);
ErrorLog.Exception("ProcessDatagram:", e);
}
}
public int Connect(String address, int target_port, int src_port, string myAddress)
{
Logger.Log("Connect({0},{1},{2},{3})", address, target_port, src_port, myAddress);
if (client != null)
{
if (client.ServerStatus == SocketStatus.SOCKET_STATUS_CONNECTED)
{
DisconnectRequest();
client.DisableUDPServer();
client = null;
}
}
SocketErrorCodes error = SocketErrorCodes.SOCKET_INVALID_STATE;
try
{
this.myAddress = KnxHelper.GetAddress(myAddress);
remoteEndpoint = get_IPEndpoint(address, target_port);
if (src_port <= 0)
{
src_port = target_port;
}
localEndpoint = get_IPEndpoint(getLocalIP(), src_port);
client = new UDPServer(remoteEndpoint, src_port, buffersz, EthernetAdapterType.EthernetLANAdapter);
InitialParametersClass.ReadInInitialParameters(1);
error = client.EnableUDPServer();
if (error == SocketErrorCodes.SOCKET_OK)
{
// start recieveing
//error = client.ReceiveDataAsync(udpReceiver);
//if (error == SocketErrorCodes.SOCKET_OPERATION_PENDING)
//{
error = ConnectRequest();
if (error != SocketErrorCodes.SOCKET_OK)
{
client.DisableUDPServer();
client = null;
}
else
{
udpReadTimer.Reset();
stateRequestTimer.Reset(stateRequestTimerInterval);
}
}
}
catch (System.Exception e)
{
Logger.Log("Connect: Exception ({0})", e.Message);
return(-1);
}
Logger.Log("Connect: ({0})", error);
return(Convert.ToInt32(error));
}
protected byte[] CreateActionDatagramCommon(string destinationAddress, bool b_bit, byte[] data, byte[] header)
{
int i;
var dataLength = KnxHelper.GetDataLength(b_bit, data);
// HEADER
var datagram = new byte[dataLength + 10 + header.Length];
for (i = 0; i < header.Length; i++)
{
datagram[i] = header[i];
}
// CEMI (start at position 6)
// +--------+--------+--------+--------+----------------+----------------+--------+----------------+
// | Msg |Add.Info| Ctrl 1 | Ctrl 2 | Source Address | Dest. Address | Data | APDU |
// | Code | Length | | | | | Length | |
// +--------+--------+--------+--------+----------------+----------------+--------+----------------+
// 1 byte 1 byte 1 byte 1 byte 2 bytes 2 bytes 1 byte 2 bytes
//
// Message Code = 0x11 - a L_Data.req primitive
// COMMON EMI MESSAGE CODES FOR DATA LINK LAYER PRIMITIVES
// FROM NETWORK LAYER TO DATA LINK LAYER
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | Data Link Layer Primitive | Message Code | Data Link Layer Service | Service Description | Common EMI Frame |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Raw.req | 0x10 | | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | | | | Primitive used for | Sample Common |
// | L_Data.req | 0x11 | Data Service | transmitting a data | EMI frame |
// | | | | frame | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Poll_Data.req | 0x13 | Poll Data Service | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Raw.req | 0x10 | | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// FROM DATA LINK LAYER TO NETWORK LAYER
// +---------------------------+--------------+-------------------------+---------------------+
// | Data Link Layer Primitive | Message Code | Data Link Layer Service | Service Description |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Poll_Data.con | 0x25 | Poll Data Service | |
// +---------------------------+--------------+-------------------------+---------------------+
// | | | | Primitive used for |
// | L_Data.ind | 0x29 | Data Service | receiving a data |
// | | | | frame |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Busmon.ind | 0x2B | Bus Monitor Service | |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Raw.ind | 0x2D | | |
// +---------------------------+--------------+-------------------------+---------------------+
// | | | | Primitive used for |
// | | | | local confirmation |
// | L_Data.con | 0x2E | Data Service | that a frame was |
// | | | | sent (does not mean |
// | | | | successful receive) |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Raw.con | 0x2F | | |
// +---------------------------+--------------+-------------------------+---------------------+
// Add.Info Length = 0x00 - no additional info
// Control Field 1 = see the bit structure above
// Control Field 2 = see the bit structure above
// Source Address = 0x0000 - filled in by router/gateway with its source address which is
// part of the KNX subnet
// Dest. Address = KNX group or individual address (2 byte)
// Data Length = Number of bytes of data in the APDU excluding the TPCI/APCI bits
// APDU = Application Protocol Data Unit - the actual payload including transport
// protocol control information (TPCI), application protocol control
// information (APCI) and data passed as an argument from higher layers of
// the KNX communication stack
//
datagram[i++] =
ActionMessageCode != 0x00
? ActionMessageCode
: (byte)0x11;
datagram[i++] = 0x00;
datagram[i++] = 0xAC;
datagram[i++] =
KnxHelper.IsAddressIndividual(destinationAddress)
? (byte)0x50
: (byte)0xF0;
datagram[i++] = myAddress[0]; // Source address
datagram[i++] = myAddress[1];
var dst_address = KnxHelper.GetAddress(destinationAddress);
datagram[i++] = dst_address[0];
datagram[i++] = dst_address[1];
datagram[i++] = (byte)dataLength;
datagram[i++] = 0x00;
datagram[i] = 0x80;
KnxHelper.WriteData(datagram, b_bit, data, i);
return(datagram);
}
protected void ProcessCEMI(KnxDatagram datagram, byte[] cemi)
{
try
{
// CEMI
// +--------+--------+--------+--------+----------------+----------------+--------+----------------+
// | Msg |Add.Info| Ctrl 1 | Ctrl 2 | Source Address | Dest. Address | Data | APDU |
// | Code | Length | | | | | Length | |
// +--------+--------+--------+--------+----------------+----------------+--------+----------------+
// 1 byte 1 byte 1 byte 1 byte 2 bytes 2 bytes 1 byte 2 bytes
//
// Message Code = 0x11 - a L_Data.req primitive
// COMMON EMI MESSAGE CODES FOR DATA LINK LAYER PRIMITIVES
// FROM NETWORK LAYER TO DATA LINK LAYER
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | Data Link Layer Primitive | Message Code | Data Link Layer Service | Service Description | Common EMI Frame |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Raw.req | 0x10 | | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | | | | Primitive used for | Sample Common |
// | L_Data.req | 0x11 | Data Service | transmitting a data | EMI frame |
// | | | | frame | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Poll_Data.req | 0x13 | Poll Data Service | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// | L_Raw.req | 0x10 | | | |
// +---------------------------+--------------+-------------------------+---------------------+------------------+
// FROM DATA LINK LAYER TO NETWORK LAYER
// +---------------------------+--------------+-------------------------+---------------------+
// | Data Link Layer Primitive | Message Code | Data Link Layer Service | Service Description |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Poll_Data.con | 0x25 | Poll Data Service | |
// +---------------------------+--------------+-------------------------+---------------------+
// | | | | Primitive used for |
// | L_Data.ind | 0x29 | Data Service | receiving a data |
// | | | | frame |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Busmon.ind | 0x2B | Bus Monitor Service | |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Raw.ind | 0x2D | | |
// +---------------------------+--------------+-------------------------+---------------------+
// | | | | Primitive used for |
// | | | | local confirmation |
// | L_Data.con | 0x2E | Data Service | that a frame was |
// | | | | sent (does not mean |
// | | | | successful receive) |
// +---------------------------+--------------+-------------------------+---------------------+
// | L_Raw.con | 0x2F | | |
// +---------------------------+--------------+-------------------------+---------------------+
// Add.Info Length = 0x00 - no additional info
// Control Field 1 = see the bit structure above
// Control Field 2 = see the bit structure above
// Source Address = 0x0000 - filled in by router/gateway with its source address which is
// part of the KNX subnet
// Dest. Address = KNX group or individual address (2 byte)
// Data Length = Number of bytes of data in the APDU excluding the TPCI/APCI bits
// APDU = Application Protocol Data Unit - the actual payload including transport
// protocol control information (TPCI), application protocol control
// information (APCI) and data passed as an argument from higher layers of
// the KNX communication stack
//
datagram.message_code = cemi[0];
datagram.aditional_info_length = cemi[1];
if (datagram.aditional_info_length > 0)
{
datagram.aditional_info = new byte[datagram.aditional_info_length];
for (var i = 0; i < datagram.aditional_info_length; i++)
{
datagram.aditional_info[i] = cemi[2 + i];
}
}
datagram.control_field_1 = cemi[2 + datagram.aditional_info_length];
datagram.control_field_2 = cemi[3 + datagram.aditional_info_length];
datagram.source_address = KnxHelper.GetIndividualAddress(new[] { cemi[4 + datagram.aditional_info_length], cemi[5 + datagram.aditional_info_length] });
datagram.destination_address =
KnxHelper.GetKnxDestinationAddressType(datagram.control_field_2).Equals(KnxHelper.KnxDestinationAddressType.INDIVIDUAL)
? KnxHelper.GetIndividualAddress(new[] { cemi[6 + datagram.aditional_info_length], cemi[7 + datagram.aditional_info_length] })
: KnxHelper.GetGroupAddress(new[] { cemi[6 + datagram.aditional_info_length], cemi[7 + datagram.aditional_info_length] },
true);
datagram.data_length = cemi[8 + datagram.aditional_info_length];
datagram.apdu = new byte[datagram.data_length + 1];
for (var i = 0; i < datagram.apdu.Length; i++)
{
datagram.apdu[i] = cemi[9 + i + datagram.aditional_info_length];
}
datagram.data = KnxHelper.GetData(datagram.data_length, datagram.apdu);
Logger.Log("-----------------------------------------------------------------------------------------------------");
Logger.Log(BitConverter.ToString(cemi));
Logger.Log("Event Header Length: " + datagram.header_length);
Logger.Log("Event Protocol Version: " + datagram.protocol_version.ToString("x"));
Logger.Log("Event Service Type: 0x" + BitConverter.ToString(datagram.service_type).Replace("-", string.Empty));
Logger.Log("Event Total Length: " + datagram.total_length);
Logger.Log("Event Message Code: " + datagram.message_code.ToString("x"));
Logger.Log("Event Aditional Info Length: " + datagram.aditional_info_length);
if (datagram.aditional_info_length > 0)
{
Logger.Log("Event Aditional Info: 0x" + BitConverter.ToString(datagram.aditional_info).Replace("-", string.Empty));
}
Logger.Log("Event Control Field 1: " + Convert.ToString(datagram.control_field_1, 2));
Logger.Log("Event Control Field 2: " + Convert.ToString(datagram.control_field_2, 2));
Logger.Log("Event Source Address: " + datagram.source_address);
Logger.Log("Event Destination Address: " + datagram.destination_address);
Logger.Log("Event Data Length: " + datagram.data_length);
Logger.Log("Event APDU: 0x" + BitConverter.ToString(datagram.apdu).Replace("-", string.Empty));
Logger.Log("-----------------------------------------------------------------------------------------------------");
if (datagram.message_code != 0x29)
{
return;
}
var type = datagram.apdu[1] >> 4;
switch (type)
{
case 8:
BuildAndExecuteKnxRx(datagram);
Logger.Log("{0}", datagram.source_address);
break;
case 4:
BuildAndExecuteKnxRx(datagram);
Logger.Log("Device {0} status {1}", datagram.source_address, datagram.destination_address);
break;
}
}
catch (Exception e)
{
Logger.Log("ProcessCEMI: {0}", e.Message);
}
}