public static TestPass ParseTestWttFileWithReruns(string fileName, string singleRerunFileName, string multipleRerunFileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
{
TestPass testPass = ParseTestWttFile(fileName, cleanupFailuresAreRegressions, truncateTestNames);
TestPass singleRerunTestPass = File.Exists(singleRerunFileName) ? ParseTestWttFile(singleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
TestPass multipleRerunTestPass = File.Exists(multipleRerunFileName) ? ParseTestWttFile(multipleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
List <TestResult> rerunTestResults = new List <TestResult>();
if (singleRerunTestPass != null)
{
rerunTestResults.AddRange(singleRerunTestPass.TestResults);
}
if (multipleRerunTestPass != null)
{
rerunTestResults.AddRange(multipleRerunTestPass.TestResults);
}
// For each failed test result, we'll check to see whether the test passed at least once upon rerun.
// If so, we'll set PassedOnRerun to true to flag the fact that this is an unreliable test
// rather than a genuine test failure.
foreach (TestResult failedTestResult in testPass.TestResults.Where(r => !r.Passed))
{
failedTestResult.RerunResults.AddRange(rerunTestResults.Where(r => r.Name == failedTestResult.Name));
if (rerunTestResults.Where(r => r.Name == failedTestResult.Name && r.Passed).Count() > 0)
{
failedTestResult.PassedOnRerun = true;
}
}
return(testPass);
}
public Dictionary <string, string> GetSubResultsJsonByMethodName(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath)
{
Dictionary <string, string> subResultsJsonByMethod = new Dictionary <string, string>();
TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
foreach (var result in testPass.TestResults)
{
var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
if (!result.Passed)
{
// If the test failed but then passed on rerun, then we'll add metadata to report the results of each run.
// Otherwise, we'll mark down the failure information.
if (result.PassedOnRerun)
{
JsonSerializableTestResults serializableResults = new JsonSerializableTestResults();
serializableResults.blobPrefix = helixResultsContainerUri;
serializableResults.blobSuffix = helixResultsContainerRsas;
List <string> errorList = new List <string>();
errorList.Add(result.Details);
foreach (TestResult rerunResult in result.RerunResults)
{
errorList.Add(rerunResult.Details);
}
serializableResults.errors = errorList.Distinct().Where(s => s != null).ToArray();
var reason = new XElement("reason");
List <JsonSerializableTestResult> serializableResultList = new List <JsonSerializableTestResult>();
serializableResultList.Add(ConvertToSerializableResult(result, serializableResults.errors));
foreach (TestResult rerunResult in result.RerunResults)
{
serializableResultList.Add(ConvertToSerializableResult(rerunResult, serializableResults.errors));
}
serializableResults.results = serializableResultList.ToArray();
using (MemoryStream stream = new MemoryStream())
{
DataContractJsonSerializer serializer = new DataContractJsonSerializer(typeof(JsonSerializableTestResults));
serializer.WriteObject(stream, serializableResults);
stream.Position = 0;
using (StreamReader streamReader = new StreamReader(stream))
{
subResultsJsonByMethod.Add(methodName, streamReader.ReadToEnd());
}
}
}
}
}
return(subResultsJsonByMethod);
}
public static void OutputFailedTestQuery(string wttInputPath)
{
var testPass = TestPass.ParseTestWttFile(wttInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
List <string> failedTestNames = new List <string>();
foreach (var result in testPass.TestResults)
{
if (!result.Passed)
{
failedTestNames.Add(result.Name);
}
}
if (failedTestNames.Count > 0)
{
string failedTestSelectQuery = "(@Name='";
for (int i = 0; i < failedTestNames.Count; i++)
{
failedTestSelectQuery += failedTestNames[i];
if (i < failedTestNames.Count - 1)
{
failedTestSelectQuery += "' or @Name='";
}
}
failedTestSelectQuery += "')";
Console.WriteLine(failedTestSelectQuery);
}
else
{
Console.WriteLine("");
}
}
public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath)
{
TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
var results = testPass.TestResults;
int resultCount = results.Count;
int passedCount = results.Where(r => r.Passed).Count();
int passedOnRerunCount = results.Where(r => r.PassedOnRerun).Count();
int failedCount = resultCount - passedCount;
var root = new XElement("assemblies");
var assembly = new XElement("assembly");
assembly.SetAttributeValue("name", "MUXControls.Test.dll");
assembly.SetAttributeValue("test-framework", "TAEF");
assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-mm-dd"));
// This doesn't need to be completely accurate since it's not exposed anywhere.
// If we need accurate an start time we can probably calculate it from the te.wtl file, but for
// now this is fine.
assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
assembly.SetAttributeValue("total", resultCount);
assembly.SetAttributeValue("passed", passedCount);
assembly.SetAttributeValue("failed", failedCount);
assembly.SetAttributeValue("skipped", passedOnRerunCount);
assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.SetAttributeValue("errors", 0);
root.Add(assembly);
var collection = new XElement("collection");
collection.SetAttributeValue("total", resultCount);
collection.SetAttributeValue("passed", passedCount);
collection.SetAttributeValue("failed", failedCount);
collection.SetAttributeValue("skipped", passedOnRerunCount);
collection.SetAttributeValue("name", "Test collection");
collection.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.Add(collection);
foreach (var result in results)
{
var test = new XElement("test");
test.SetAttributeValue("name", testNamePrefix + "." + result.Name);
var className = result.Name.Substring(0, result.Name.LastIndexOf('.'));
var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
test.SetAttributeValue("type", className);
test.SetAttributeValue("method", methodName);
test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
string resultString = string.Empty;
if (result.Passed)
{
resultString = "Pass";
}
else if (result.PassedOnRerun)
{
resultString = "Skip";
}
else
{
resultString = "Fail";
}
test.SetAttributeValue("result", resultString);
if (!result.Passed)
{
// If the test failed but then passed on rerun, then we'll add metadata to report the results of each run.
// Otherwise, we'll mark down the failure information.
if (result.PassedOnRerun)
{
// We'll save the subresults to a JSON text file that we'll upload to the helix results container -
// this allows it to be as long as we want, whereas the reason field in Azure DevOps has a 4000 character limit.
string subResultsFileName = methodName + "_subresults.json";
string subResultsFilePath = Path.Combine(Path.GetDirectoryName(wttInputPath), subResultsFileName);
var reason = new XElement("reason");
reason.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
test.Add(reason);
}
else
{
var failure = new XElement("failure");
failure.SetAttributeValue("exception-type", "Exception");
var message = new XElement("message");
StringBuilder errorMessage = new StringBuilder();
errorMessage.AppendLine("Log: " + GetUploadedFileUrl(result.SourceWttFile, helixResultsContainerUri, helixResultsContainerRsas));
errorMessage.AppendLine();
if (result.Screenshots.Any())
{
errorMessage.AppendLine("Screenshots:");
foreach (var screenshot in result.Screenshots)
{
errorMessage.AppendLine(GetUploadedFileUrl(screenshot, helixResultsContainerUri, helixResultsContainerRsas));
errorMessage.AppendLine();
}
}
errorMessage.AppendLine("Error Log: ");
errorMessage.AppendLine(result.Details);
message.Add(new XCData(errorMessage.ToString()));
failure.Add(message);
test.Add(failure);
}
}
collection.Add(test);
}
File.WriteAllText(xunitOutputPath, root.ToString());
}
public static TestPass ParseTestWttFile(string fileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
{
using (var stream = File.OpenRead(fileName))
{
var doc = XDocument.Load(stream);
var testResults = new List <TestResult>();
var testExecutionTimeMap = new Dictionary <string, List <double> >();
TestResult currentResult = null;
long frequency = 0;
long startTime = 0;
long stopTime = 0;
bool inTestCleanup = false;
bool shouldLogToTestDetails = false;
long testPassStartTime = 0;
long testPassStopTime = 0;
Func <XElement, bool> isScopeData = (elt) =>
{
return
(elt.Element("Data") != null &&
elt.Element("Data").Element("WexContext") != null &&
(
elt.Element("Data").Element("WexContext").Value == "Cleanup" ||
elt.Element("Data").Element("WexContext").Value == "TestScope" ||
elt.Element("Data").Element("WexContext").Value == "TestScope" ||
elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
elt.Element("Data").Element("WexContext").Value == "ModuleScope"
));
};
Func <XElement, bool> isModuleOrClassScopeStart = (elt) =>
{
return
(elt.Name == "Msg" &&
elt.Element("Data") != null &&
elt.Element("Data").Element("StartGroup") != null &&
elt.Element("Data").Element("WexContext") != null &&
(elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
elt.Element("Data").Element("WexContext").Value == "ModuleScope"));
};
Func <XElement, bool> isModuleScopeEnd = (elt) =>
{
return
(elt.Name == "Msg" &&
elt.Element("Data") != null &&
elt.Element("Data").Element("EndGroup") != null &&
elt.Element("Data").Element("WexContext") != null &&
elt.Element("Data").Element("WexContext").Value == "ModuleScope");
};
Func <XElement, bool> isClassScopeEnd = (elt) =>
{
return
(elt.Name == "Msg" &&
elt.Element("Data") != null &&
elt.Element("Data").Element("EndGroup") != null &&
elt.Element("Data").Element("WexContext") != null &&
elt.Element("Data").Element("WexContext").Value == "ClassScope");
};
int testsExecuting = 0;
foreach (XElement element in doc.Root.Elements())
{
// Capturing the frequency data to record accurate
// timing data.
if (element.Name == "RTI")
{
frequency = Int64.Parse(element.Attribute("Frequency").Value);
}
// It's possible for a test to launch another test. If that happens, we won't modify the
// current result. Instead, we'll continue operating like normal and expect that we get two
// EndTests nodes before our next StartTests. We'll check that we've actually got a stop time
// before creating a new result. This will result in the two results being squashed
// into one result of the outer test that ran the inner one.
if (element.Name == "StartTest")
{
testsExecuting++;
if (testsExecuting == 1)
{
string testName = element.Attribute("Title").Value;
if (truncateTestNames)
{
const string xamlNativePrefix = "Windows::UI::Xaml::Tests::";
const string xamlManagedPrefix = "Windows.UI.Xaml.Tests.";
if (testName.StartsWith(xamlNativePrefix))
{
testName = testName.Substring(xamlNativePrefix.Length);
}
else if (testName.StartsWith(xamlManagedPrefix))
{
testName = testName.Substring(xamlManagedPrefix.Length);
}
}
currentResult = new TestResult()
{
Name = testName, SourceWttFile = fileName, Passed = true, CleanupPassed = true
};
testResults.Add(currentResult);
startTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
inTestCleanup = false;
shouldLogToTestDetails = true;
stopTime = 0;
}
}
else if (currentResult != null && element.Name == "EndTest")
{
testsExecuting--;
// If any inner test fails, we'll still fail the outer
currentResult.Passed &= element.Attribute("Result").Value == "Pass";
// Only gather execution data if this is the outer test we ran initially
if (testsExecuting == 0)
{
stopTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
if (!testExecutionTimeMap.Keys.Contains(currentResult.Name))
{
testExecutionTimeMap[currentResult.Name] = new List <double>();
}
testExecutionTimeMap[currentResult.Name].Add((double)(stopTime - startTime) / frequency);
currentResult.ExecutionTime = TimeSpan.FromSeconds(testExecutionTimeMap[currentResult.Name].Average());
startTime = 0;
inTestCleanup = true;
}
}
else if (currentResult != null &&
(isModuleOrClassScopeStart(element) || isModuleScopeEnd(element) || isClassScopeEnd(element)))
{
shouldLogToTestDetails = false;
inTestCleanup = false;
}
// Log-appending methods.
if (currentResult != null && element.Name == "Error")
{
if (shouldLogToTestDetails)
{
currentResult.Details += "\r\n[Error]: " + element.Attribute("UserText").Value;
if (element.Attribute("File") != null && element.Attribute("File").Value != "")
{
currentResult.Details += (" [File " + element.Attribute("File").Value);
if (element.Attribute("Line") != null)
{
currentResult.Details += " Line: " + element.Attribute("Line").Value;
}
currentResult.Details += "]";
}
}
// The test cleanup errors will often come after the test claimed to have
// 'passed'. We treat them as errors as well.
if (inTestCleanup)
{
currentResult.CleanupPassed = false;
currentResult.Passed = false;
// In stress mode runs, this test will run n times before cleanup is run. If the cleanup
// fails, we want to fail every test.
if (cleanupFailuresAreRegressions)
{
foreach (var result in testResults.Where(res => res.Name == currentResult.Name))
{
result.Passed = false;
result.CleanupPassed = false;
}
}
}
}
if (currentResult != null && element.Name == "Warn")
{
if (shouldLogToTestDetails)
{
currentResult.Details += "\r\n[Warn]: " + element.Attribute("UserText").Value;
}
if (element.Attribute("File") != null && element.Attribute("File").Value != "")
{
currentResult.Details += (" [File " + element.Attribute("File").Value);
if (element.Attribute("Line") != null)
{
currentResult.Details += " Line: " + element.Attribute("Line").Value;
}
currentResult.Details += "]";
}
}
if (currentResult != null && element.Name == "Msg")
{
var dataElement = element.Element("Data");
if (dataElement != null)
{
var supportingInfo = dataElement.Element("SupportingInfo");
if (supportingInfo != null)
{
var screenshots = supportingInfo.Elements("Item")
.Where(item => GetAttributeValue(item, "Name") == "Screenshot")
.Select(item => GetAttributeValue(item, "Value"));
foreach (var screenshot in screenshots)
{
string fileNameSuffix = string.Empty;
if (fileName.Contains("_rerun_multiple"))
{
fileNameSuffix = "_rerun_multiple";
}
else if (fileName.Contains("_rerun"))
{
fileNameSuffix = "_rerun";
}
currentResult.Screenshots.Add(screenshot.Replace(".jpg", fileNameSuffix + ".jpg"));
}
}
}
}
}
testPassStartTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
testPassStopTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").Last().Attribute("TimeStamp").Value);
var testPassTime = TimeSpan.FromSeconds((double)(testPassStopTime - testPassStartTime) / frequency);
foreach (TestResult testResult in testResults)
{
if (testResult.Details != null)
{
testResult.Details = testResult.Details.Trim();
}
}
var testpass = new TestPass
{
TestPassExecutionTime = testPassTime,
TestResults = testResults
};
return(testpass);
}
}
public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath, int requiredPassRateThreshold)
{
TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
var results = testPass.TestResults;
int resultCount = results.Count;
int passedCount = results.Where(r => r.Passed).Count();
// Since we re-run tests on failure, we'll mark every test that failed at least once as "skipped" rather than "failed".
// If the test failed sufficiently often enough for it to count as a failed test (determined by a property on the
// Azure DevOps job), we'll later mark it as failed during test results processing.
int failedCount = results.Where(r => !r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
int skippedCount = results.Where(r => !r.Passed && r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
var root = new XElement("assemblies");
var assembly = new XElement("assembly");
assembly.SetAttributeValue("name", "MUXControls.Test.dll");
assembly.SetAttributeValue("test-framework", "TAEF");
assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-MM-dd"));
// This doesn't need to be completely accurate since it's not exposed anywhere.
// If we need accurate an start time we can probably calculate it from the te.wtl file, but for
// now this is fine.
assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
assembly.SetAttributeValue("total", resultCount);
assembly.SetAttributeValue("passed", passedCount);
assembly.SetAttributeValue("failed", failedCount);
assembly.SetAttributeValue("skipped", skippedCount);
assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.SetAttributeValue("errors", 0);
root.Add(assembly);
var collection = new XElement("collection");
collection.SetAttributeValue("total", resultCount);
collection.SetAttributeValue("passed", passedCount);
collection.SetAttributeValue("failed", failedCount);
collection.SetAttributeValue("skipped", skippedCount);
collection.SetAttributeValue("name", "Test collection");
collection.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.Add(collection);
foreach (var result in results)
{
var test = new XElement("test");
test.SetAttributeValue("name", testNamePrefix + "." + result.Name);
var className = GetTestClassName(result.Name);
var methodName = GetTestMethodName(result.Name);
test.SetAttributeValue("type", className);
test.SetAttributeValue("method", methodName);
test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
string resultString = string.Empty;
if (result.Passed)
{
resultString = "Pass";
}
else if (result.PassedOrUnreliable(requiredPassRateThreshold))
{
resultString = "Skip";
}
else
{
resultString = "Fail";
}
test.SetAttributeValue("result", resultString);
if (!result.Passed)
{
// If a test failed, we'll have rerun it multiple times.
// We'll save the subresults to a JSON text file that we'll upload to the helix results container -
// this allows it to be as long as we want, whereas the reason field in Azure DevOps has a 4000 character limit.
string subResultsFileName = methodName + "_subresults.json";
string subResultsFilePath = Path.Combine(Path.GetDirectoryName(wttInputPath), subResultsFileName);
if (result.PassedOrUnreliable(requiredPassRateThreshold))
{
var reason = new XElement("reason");
reason.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
test.Add(reason);
}
else
{
var failure = new XElement("failure");
var message = new XElement("message");
message.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
failure.Add(message);
test.Add(failure);
}
}
collection.Add(test);
}
File.WriteAllText(xunitOutputPath, root.ToString());
}
public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath)
{
TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
var results = testPass.TestResults;
int resultCount = results.Count;
int passedCount = results.Where(r => r.Passed).Count();
int passedOnRerunCount = results.Where(r => r.PassedOnRerun).Count();
int failedCount = resultCount - passedCount;
var root = new XElement("assemblies");
var assembly = new XElement("assembly");
assembly.SetAttributeValue("name", "MUXControls.Test.dll");
assembly.SetAttributeValue("test-framework", "TAEF");
assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-mm-dd"));
// This doesn't need to be completely accurate since it's not exposed anywhere.
// If we need accurate an start time we can probably calculate it from the te.wtl file, but for
// now this is fine.
assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
assembly.SetAttributeValue("total", resultCount);
assembly.SetAttributeValue("passed", passedCount);
assembly.SetAttributeValue("failed", failedCount);
assembly.SetAttributeValue("skipped", passedOnRerunCount);
assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.SetAttributeValue("errors", 0);
root.Add(assembly);
var collection = new XElement("collection");
collection.SetAttributeValue("total", resultCount);
collection.SetAttributeValue("passed", passedCount);
collection.SetAttributeValue("failed", failedCount);
collection.SetAttributeValue("skipped", passedOnRerunCount);
collection.SetAttributeValue("name", "Test collection");
collection.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
assembly.Add(collection);
foreach (var result in results)
{
var test = new XElement("test");
test.SetAttributeValue("name", testNamePrefix + "." + result.Name);
var className = result.Name.Substring(0, result.Name.LastIndexOf('.'));
var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
test.SetAttributeValue("type", className);
test.SetAttributeValue("method", methodName);
test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
string resultString = string.Empty;
if (result.Passed)
{
resultString = "Pass";
}
else if (result.PassedOnRerun)
{
resultString = "Skip";
}
else
{
resultString = "Fail";
}
test.SetAttributeValue("result", resultString);
if (!result.Passed)
{
// If the test failed but then passed on rerun, then we'll add metadata to report the results of each run.
// Otherwise, we'll mark down the failure information.
if (result.PassedOnRerun)
{
JsonSerializableTestResults serializableResults = new JsonSerializableTestResults();
serializableResults.blobPrefix = helixResultsContainerUri;
serializableResults.blobSuffix = helixResultsContainerRsas;
List <string> errorList = new List <string>();
errorList.Add(result.Details);
foreach (TestResult rerunResult in result.RerunResults)
{
errorList.Add(rerunResult.Details);
}
serializableResults.errors = errorList.Distinct().Where(s => s != null).ToArray();
var reason = new XElement("reason");
List <JsonSerializableTestResult> serializableResultList = new List <JsonSerializableTestResult>();
serializableResultList.Add(ConvertToSerializableResult(result, serializableResults.errors));
foreach (TestResult rerunResult in result.RerunResults)
{
serializableResultList.Add(ConvertToSerializableResult(rerunResult, serializableResults.errors));
}
serializableResults.results = serializableResultList.ToArray();
MemoryStream stream = new MemoryStream();
DataContractJsonSerializer serializer = new DataContractJsonSerializer(typeof(JsonSerializableTestResults));
serializer.WriteObject(stream, serializableResults);
stream.Position = 0;
StreamReader streamReader = new StreamReader(stream);
reason.Add(new XCData(streamReader.ReadToEnd()));
test.Add(reason);
}
else
{
var failure = new XElement("failure");
failure.SetAttributeValue("exception-type", "Exception");
var message = new XElement("message");
StringBuilder errorMessage = new StringBuilder();
errorMessage.AppendLine("Log: " + GetUploadedFileUrl(result.SourceWttFile, helixResultsContainerUri, helixResultsContainerRsas));
errorMessage.AppendLine();
if (result.Screenshots.Any())
{
errorMessage.AppendLine("Screenshots:");
foreach (var screenshot in result.Screenshots)
{
errorMessage.AppendLine(GetUploadedFileUrl(screenshot, helixResultsContainerUri, helixResultsContainerRsas));
errorMessage.AppendLine();
}
}
errorMessage.AppendLine("Error Log: ");
errorMessage.AppendLine(result.Details);
message.Add(new XCData(errorMessage.ToString()));
failure.Add(message);
test.Add(failure);
}
}
collection.Add(test);
}
File.WriteAllText(xunitOutputPath, root.ToString());
}
