public EdgeSource(int[] attr_in, Hare.Geometry.Point PtZ0, Hare.Geometry.Point _PtZ, Vector[] _Tangents)
{
attr = attr_in;
Tangent = _Tangents;
Z_Norm = _PtZ - PtZ0;
Z_Range = Z_Norm.Length();
Z_dot = Z_Range * Z_Range;//Hare_math.Dot(Z_Norm, Z_Norm);
Z_Norm /= Z_Range;
Z_Range_2 = Z_Range / 2;
Z_mid = (PtZ0 + _PtZ) / 2;
Vector Bisector = (Tangent[0] + Tangent[1]) / 2;
Bisector.Normalize();
double BisectAngle = Math.Acos(Hare_math.Dot(Tangent[0], Bisector));
if (BisectAngle == 0)
{
BisectAngle = 1E-12;
}
v = new double[2] {
Math.PI / (2 * BisectAngle), Math.PI / (Utilities.Numerics.PiX2 - 2 * BisectAngle)
};
v_4pi = new double[2] {
v[0] / (4 * Math.PI), v[1] / (4 * Math.PI)
};
v_2pi = new double[2] {
v[0] / (2 * Math.PI), v[1] / (2 * Math.PI)
};
Normal[0] = Hare_math.Cross(_Tangents[0], Z_Norm);
Normal[1] = Hare_math.Cross(_Tangents[1], Z_Norm * -1);
if (Hare_math.Dot(Normal[0], Bisector) > 0)
{
Normal[0] *= -1;
Normal[1] *= -1;
}
////////////////////////////
//VisCheck//
Rhino.Geometry.Point3d pt = new Rhino.Geometry.Point3d(Z_mid.x, Z_mid.y, Z_mid.z);
Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Normal[0].x, Normal[0].y, Normal[0].z));
Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Normal[1].x, Normal[1].y, Normal[1].z));
//Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Tangent[0].x, Tangent[0].y, Tangent[0].z));
//Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Tangent[1].x, Tangent[1].y, Tangent[1].z));
//////Rhino.RhinoDoc.ActiveDoc.Objects.AddPoint(new Rhino.Geometry.Point3d(Z_mid.x, Z_mid.y, Z_mid.z));
}
public EdgeSource(int[] attr_in, Hare.Geometry.Point PtZ0, Hare.Geometry.Point _PtZ, Vector[] _Tangents)
{
attr = attr_in;
Tangent = _Tangents;
Z_Norm = _PtZ - PtZ0;
Z_Range = Z_Norm.Length();
Z_dot = Z_Range * Z_Range;//Hare_math.Dot(Z_Norm, Z_Norm);
Z_Norm /= Z_Range;
Z_Range_2 = Z_Range / 2;
Z_mid = (PtZ0 + _PtZ) / 2;
Vector Bisector = (Tangent[0] + Tangent[1]) / 2;
Bisector.Normalize();
double BisectAngle = Math.Acos(Hare_math.Dot(Tangent[0], Bisector));
if (BisectAngle == 0)
{
BisectAngle = 1E-12;
}
v = new double[2] {
Math.PI / (2 * BisectAngle), Math.PI / (Utilities.Numerics.PiX2 - 2 * BisectAngle)
};
v_4pi = new double[2] {
v[0] / (4 * Math.PI), v[1] / (4 * Math.PI)
};
v_2pi = new double[2] {
v[0] / (2 * Math.PI), v[1] / (2 * Math.PI)
};
Normal[0] = Hare_math.Cross(_Tangents[0], Z_Norm);
Normal[1] = Hare_math.Cross(_Tangents[1], Z_Norm * -1);
if (Hare_math.Dot(Normal[0], Bisector) > 0)
{
Normal[0] *= -1;
Normal[1] *= -1;
}
}
private bool Check_Validity(Point p, int rec_id, int rnd, out double dist)
{
Hare.Geometry.Vector d = RecMain.Origin(rec_id) - p;
dist = d.Length();
d.Normalize();
Ray R = new Ray(Source.H_Origin(), d, 0, rnd);
double x1 = 0, x2 = 0;
double t;
int x3 = 0;
Point x4;
while (true)
{
if (Room.shoot(R, out x1, out x2, out x3, out x4, out t))
{
return(t >= dist);
}
else
{
return(true);
}
}
}
public EdgeSource(int[] attr_in, Hare.Geometry.Point PtZ0, Hare.Geometry.Point _PtZ, Vector[] _Tangents)
{
attr = attr_in;
Tangent = _Tangents;
Z_Norm = _PtZ - PtZ0;
Z_Range = Z_Norm.Length();
Z_dot = Z_Range * Z_Range;//Hare_math.Dot(Z_Norm, Z_Norm);
Z_Norm/= Z_Range;
Z_Range_2 = Z_Range / 2;
Z_mid = (PtZ0 + _PtZ) / 2;
Vector Bisector = (Tangent[0] + Tangent[1])/2;
Bisector.Normalize();
double BisectAngle = Math.Acos(Hare_math.Dot(Tangent[0], Bisector));
if (BisectAngle == 0) BisectAngle = 1E-12;
v = new double[2] { Math.PI / (2 * BisectAngle), Math.PI / (Utilities.Numerics.PiX2 - 2 * BisectAngle) };
v_4pi = new double[2] { v[0] / (4 * Math.PI), v[1] / (4 * Math.PI) };
v_2pi = new double[2] { v[0] / (2 * Math.PI), v[1] / (2 * Math.PI) };
Normal[0] = Hare_math.Cross(_Tangents[0], Z_Norm);
Normal[1] = Hare_math.Cross(_Tangents[1], Z_Norm*-1);
if(Hare_math.Dot(Normal[0], Bisector) > 0)
{
Normal[0] *= -1;
Normal[1] *= -1;
}
////////////////////////////
//VisCheck//
Rhino.Geometry.Point3d pt = new Rhino.Geometry.Point3d(Z_mid.x, Z_mid.y, Z_mid.z);
Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Normal[0].x, Normal[0].y, Normal[0].z));
Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Normal[1].x, Normal[1].y, Normal[1].z));
//Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Tangent[0].x, Tangent[0].y, Tangent[0].z));
//Rhino.RhinoDoc.ActiveDoc.Objects.AddLine(pt, pt + new Rhino.Geometry.Point3d(Tangent[1].x, Tangent[1].y, Tangent[1].z));
//////Rhino.RhinoDoc.ActiveDoc.Objects.AddPoint(new Rhino.Geometry.Point3d(Z_mid.x, Z_mid.y, Z_mid.z));
}
