private void create_extended_B()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).Reverse().ToList();
foreach (G.Edge e in emptyEdges)
{
G.Corner sc = e.StartCorner;
G.Corner ec = e.EndCorner;
bool c1 = sc.Angle > Math.PI;
bool c2 = ec.Angle > Math.PI;
if (c1 && c2)
{
continue;
}
if (!c1 && !c2)
{
continue;
}
if (c1) //startCorner >> math.pi
{
G.Edge otherEdge = ec.getOtherEdge(e);
define_B(otherEdge, e);
}
else if (c2) //endCorner >> math.pi
{
G.Edge otherEdge = sc.getOtherEdge(e);
define_B(e, otherEdge);
}
}
}
private void create_valid_D()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).Reverse().ToList();
foreach (G.Edge e in emptyEdges)
{
G.Corner sc = e.StartCorner;
G.Corner ec = e.EndCorner;
G.Edge side1Edge = sc.getOtherEdge(e);
G.Edge side2Edge = ec.getOtherEdge(e);
bool c1 = !setCorners.Keys.Contains(sc);
bool c2 = !setCorners.Keys.Contains(ec);
bool c3 = sc.Angle < Math.PI;
bool c4 = ec.Angle < Math.PI;
bool c5 = setEdges.Keys.Contains(side1Edge);
bool c6 = setEdges.Keys.Contains(side2Edge);
if (c1 && c2 && c3 && c4 && c5 && c6)
{
define_simple_D(e, side1Edge, side2Edge);
}
}
}
private void create_oversized_D()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).Reverse().ToList();
foreach (G.Edge e in emptyEdges)
{
G.Corner sc = e.StartCorner;
G.Corner ec = e.EndCorner;
G.Edge side1Edge = sc.getOtherEdge(e);
G.Edge side2Edge = ec.getOtherEdge(e);
bool c1 = !setCorners.Keys.Contains(sc);
bool c2 = !setCorners.Keys.Contains(ec);
bool c3 = sc.Angle < Math.PI;
bool c4 = ec.Angle < Math.PI;
bool c5 = setEdges.Keys.Contains(side1Edge);
bool c6 = setEdges.Keys.Contains(side2Edge);
if (c1 && c2 && c3 && c4)
{
if (!c5 && !c6)
{
if (side1Edge.Line.Length() < _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
if (side2Edge.Line.Length() < _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
define_simple_D(e, side1Edge, side2Edge);
}
}
}
else if (!c5)
{
if (side1Edge.Line.Length() < _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
define_simple_D(e, side1Edge, side2Edge);
}
}
else if (!c6)
{
if (side2Edge.Line.Length() < _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
define_simple_D(e, side1Edge, side2Edge);
}
}
}
}
}
private void create_trimmed_short_A()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).ToList();
foreach (G.Edge e in emptyEdges)
{
if (setEdges.Keys.Contains(e))
{
continue;
}
if (narrow_denier(e))
{
continue;
}
G.Edge temp = null;
G.Line main = e.edgeOffset(_V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1);
main = trimLine_baseline(main, main.Copy(), _V_.X_CONCRETE_COVER_2, e, ref temp);
bool startTrimmed = false;
G.Edge startTrimmerEdge = null;
if (e.StartCorner.Angle > Math.PI)
{
G.Line extended = main.extendStart(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.End, _V_.X_CONCRETE_COVER_2, e, ref startTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
startTrimmed = true;
}
main = trimmed;
}
bool endTrimmed = false;
G.Edge endTrimmerEdge = null;
if (e.EndCorner.Angle > Math.PI)
{
G.Line extended = main.extendEnd(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.Start, _V_.X_CONCRETE_COVER_2, e, ref endTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
endTrimmed = true;
}
main = trimmed;
}
if (main.Length() <= _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
if (startTrimmed && endTrimmed)
{
bool got_D = define_D(e, startTrimmerEdge, endTrimmerEdge);
if (got_D == false)
{
G.Vector v1 = main.getOffsetVector();
G.Vector v2 = startTrimmerEdge.Line.getCoolVector(v1);
G.Vector v3 = endTrimmerEdge.Line.getCoolVector(v1);
G.Point side1Point = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.05, v2);
G.Point side2Point = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.05, v3);
G.Line side1 = new G.Line(side1Point, main.Start);
G.Line side2 = new G.Line(main.End, side2Point);
if (denier(side1) && denier(side2))
{
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge side1TrimmerEdge = null;
G.Line side1Main = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref side1TrimmerEdge);
G.Point AP2 = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v3);
G.Line b_line2 = new G.Line(main.End, AP2);
G.Edge side2TrimmerEdge = null;
G.Line side2Main = trimLine_basepoint(b_line2, main.End, _V_.X_CONCRETE_COVER_2, e, ref side2TrimmerEdge);
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
define_D(startTrimmerEdge, side1TrimmerEdge, e);
define_D(endTrimmerEdge, e, side2TrimmerEdge);
}
else if (denier(side1))
{
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
B_vs_C_handler(main.End, side2Point, main.Start, e, null);
define_D(startTrimmerEdge, sideTrimmerEdge, e);
}
else if (denier(side2))
{
G.Point AP = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.End, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.End, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
define_D(endTrimmerEdge, e, sideTrimmerEdge);
B_vs_C_handler(main.Start, main.End, side1Point, e, null);
}
}
}
else if (startTrimmed)
{
bool got_B = define_B(e, startTrimmerEdge);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = startTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 2, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
bool got_D = define_D(startTrimmerEdge, sideTrimmerEdge, e);
if (got_D)
{
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
}
}
else
{
G.Corner ec = e.EndCorner;
if (ec.Angle < Math.PI)
{
G.Edge otherEdge = ec.getOtherEdge(e);
define_D(e, startTrimmerEdge, otherEdge);
}
}
}
}
else if (endTrimmed)
{
bool got_B = define_B(endTrimmerEdge, e);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = endTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 2, v2);
G.Line b_line = new G.Line(main.End, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.End, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
bool got_D = define_D(endTrimmerEdge, e, sideTrimmerEdge);
if (got_D)
{
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
}
}
else
{
G.Corner sc = e.StartCorner;
if (sc.Angle < Math.PI)
{
G.Edge otherEdge = sc.getOtherEdge(e);
define_D(e, otherEdge, endTrimmerEdge);
}
}
}
}
}
}
}
