/// <summary>
/// Adds a new frame to the model.
/// </summary>
public Frame AddFrame(FrameSection section, Node n1, Node n2)
{
Frame n = new Frame(section, n1, n2);
Frames.Add(n);
return n;
}
/// <summary>
/// Divides the given frame so that it is shorter than the given length.
/// </summary>
public void DivideFrame(Frame f, double maxFrameSize)
{
int n = (int)Math.Ceiling(f.Length / maxFrameSize);
DivideFrame(f, n);
}
/// <summary>
/// Divides the given frame into given number of pieces.
/// </summary>
public void DivideFrame(Frame f, int n)
{
Node n1 = f.NodeI;
Node n2 = f.NodeJ;
double xStep = (n2.X - n1.X) / (double)n;
double zStep = (n2.Z - n1.Z) / (double)n;
Node[] nodes = new Node[n + 1];
nodes[0] = n1;
nodes[nodes.Length - 1] = n2;
double x = n1.X + xStep;
double z = n1.Z + zStep;
for (int i = 0; i < n - 1; i++)
{
nodes[i + 1] = AddNode(x, z);
x += xStep;
z += zStep;
}
Frames.Remove(f);
for (int i = 0; i < n; i++)
{
Frame newFrame = AddFrame(f.Section, nodes[i], nodes[i + 1]);
// Transfer loads
// Uniform loads
foreach (FrameLoad masterLoad in f.Loads.FindAll((e) => e is FrameUniformLoad))
{
FrameUniformLoad masterUniformLoad = masterLoad as FrameUniformLoad;
newFrame.AddUniformLoad(masterUniformLoad.AnalysisCase, masterUniformLoad.FX, masterUniformLoad.FZ);
}
// Trapezoidal loads
foreach (FrameLoad masterLoad in f.Loads.FindAll((e) => e is FrameTrapezoidalLoad))
{
FrameTrapezoidalLoad masterTrapezoidalLoad = masterLoad as FrameTrapezoidalLoad;
double mxi = masterTrapezoidalLoad.FXI;
double mzi = masterTrapezoidalLoad.FZI;
double mxj = masterTrapezoidalLoad.FXJ;
double mzj = masterTrapezoidalLoad.FZJ;
double xTotal = f.Length;
double xStart = newFrame.NodeI.DistanceTo(f.NodeI);
double xEnd = newFrame.NodeJ.DistanceTo(f.NodeI);
double fxi = xStart / xTotal * (mxj - mxi) + mxi;
double fzi = xStart / xTotal * (mzj - mzi) + mzi;
double fxj = xEnd / xTotal * (mxj - mxi) + mxi;
double fzj = xEnd / xTotal * (mzj - mzi) + mzi;
newFrame.AddTrapezoidalLoad(masterTrapezoidalLoad.AnalysisCase, fxi, fzi, fxj, fzj);
}
}
}
/// <summary>
/// Adds a new frame uniform load.
/// </summary>
public void AddFrameUniformLoad(AnalysisCase analysisCase, Frame frame, double fx, double fz)
{
frame.AddUniformLoad(analysisCase, fx, fz);
}
/// <summary>
/// Adds a new frame trapezoidal load.
/// </summary>
public void AddFrameTrapezoidalLoad(AnalysisCase analysisCase, Frame frame, double fxi, double fzi, double fxj, double fzj)
{
frame.AddTrapezoidalLoad(analysisCase, fxi, fzi, fxj, fzj);
}
/// <summary>
/// Adds frame self weight load.
/// </summary>
public void AddFrameSelfWeight(AnalysisCase analysisCase, Frame frame)
{
frame.AddUniformLoad(analysisCase, 0, -frame.WeightPerLength);
}
private void DrawInternalForce(Frame f, float forceI, float forceJ, float scale)
{
float x1 = (float)f.NodeI.X;
float y1 = (float)f.NodeI.Z;
float x2 = (float)f.NodeJ.X;
float y2 = (float)f.NodeJ.Z;
float orientation = (float)f.Angle;
float loadOrientation = orientation + (float)Math.PI / 2;
float textAngle = orientation * 180 / (float)Math.PI + 90;
int fillAlpha = (int)((1 - mFillTransparency) * 255);
Color negativeColor = Color.FromArgb(fillAlpha, NegativeForceColor);
Color positiveColor = Color.FromArgb(fillAlpha, PositiveForceColor);
float loadx1 = x1 + (float)(forceI * scale * Math.Cos(loadOrientation));
float loady1 = y1 + (float)(forceI * scale * Math.Sin(loadOrientation));
float loadx2 = x2 + (float)(forceJ * scale * Math.Cos(loadOrientation));
float loady2 = y2 + (float)(forceJ * scale * Math.Sin(loadOrientation));
if ((Math.Abs(forceI - forceJ) < float.Epsilon) || (Math.Sign(forceI) * Math.Sign(forceJ) > 0))
{
SimpleCAD.Polygon poly = new SimpleCAD.Polygon(new PointF[] { new PointF(x1, y1), new PointF(x2, y2), new PointF(loadx2, loady2), new PointF(loadx1, loady1) });
poly.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
poly.FillStyle = new SimpleCAD.FillStyle(forceI < 0 ? negativeColor : positiveColor);
Model.Add(poly);
}
else
{
float xmid = Math.Abs(forceI) / Math.Abs(forceI - forceJ) * (x2 - x1) + x1;
float ymid = Math.Abs(forceI) / Math.Abs(forceI - forceJ) * (y2 - y1) + y1;
SimpleCAD.Polygon polyI = new SimpleCAD.Polygon(new PointF[] { new PointF(x1, y1), new PointF(xmid, ymid), new PointF(loadx1, loady1) });
polyI.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
polyI.FillStyle = new SimpleCAD.FillStyle(forceI < 0 ? negativeColor : positiveColor);
Model.Add(polyI);
SimpleCAD.Polygon polyJ = new SimpleCAD.Polygon(new PointF[] { new PointF(xmid, ymid), new PointF(x2, y2), new PointF(loadx2, loady2) });
polyJ.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
polyJ.FillStyle = new SimpleCAD.FillStyle(forceJ < 0 ? negativeColor : positiveColor);
Model.Add(polyJ);
}
SimpleCAD.Line line1 = new SimpleCAD.Line(x1, y1, loadx1, loady1);
line1.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line1);
SimpleCAD.Line line2 = new SimpleCAD.Line(x2, y2, loadx2, loady2);
line2.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line2);
SimpleCAD.Line line3 = new SimpleCAD.Line(loadx1, loady1, loadx2, loady2);
line3.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line3);
SimpleCAD.Line line4 = new SimpleCAD.Line(x1, y1, x2, y2);
line4.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line4);
SimpleCAD.Text textI = new SimpleCAD.Text(loadx1, loady1, forceI.ToString("0.0"), TextSize);
textI.HorizontalAlignment = StringAlignment.Near;
textI.VerticalAlignment = StringAlignment.Center;
textI.Rotation = textAngle;
textI.FontFamily = Font.Name;
textI.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(textI);
SimpleCAD.Text textJ = new SimpleCAD.Text(loadx2, loady2, forceJ.ToString("0.0"), TextSize);
textJ.HorizontalAlignment = StringAlignment.Near;
textJ.VerticalAlignment = StringAlignment.Center;
textJ.Rotation = textAngle;
textJ.FontFamily = Font.Name;
textJ.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(textJ);
}
private void DrawInternalForce(Frame f, float minForceI, float minForceJ, float maxForceI, float maxForceJ, float scale)
{
float x1 = (float)f.NodeI.X;
float y1 = (float)f.NodeI.Z;
float x2 = (float)f.NodeJ.X;
float y2 = (float)f.NodeJ.Z;
float orientation = (float)f.Angle;
float loadOrientation = orientation + (float)Math.PI / 2;
float textAngle = orientation * 180 / (float)Math.PI + 90;
int fillAlpha = (int)((1 - mFillTransparency) * 255);
Color negativeColor = Color.FromArgb(fillAlpha, NegativeForceColor);
Color positiveColor = Color.FromArgb(fillAlpha, PositiveForceColor);
Color envelopeColor = Color.FromArgb(fillAlpha, EnvelopeForceColor);
float minLoadx1 = x1 + (float)(minForceI * scale * Math.Cos(loadOrientation));
float minLoady1 = y1 + (float)(minForceI * scale * Math.Sin(loadOrientation));
float minLoadx2 = x2 + (float)(minForceJ * scale * Math.Cos(loadOrientation));
float minLoady2 = y2 + (float)(minForceJ * scale * Math.Sin(loadOrientation));
float maxLoadx1 = x1 + (float)(maxForceI * scale * Math.Cos(loadOrientation));
float maxLoady1 = y1 + (float)(maxForceI * scale * Math.Sin(loadOrientation));
float maxLoadx2 = x2 + (float)(maxForceJ * scale * Math.Cos(loadOrientation));
float maxLoady2 = y2 + (float)(maxForceJ * scale * Math.Sin(loadOrientation));
SimpleCAD.Polygon range = new SimpleCAD.Polygon(new PointF[] { new PointF(minLoadx1, minLoady1), new PointF(minLoadx2, minLoady2), new PointF(maxLoadx2, maxLoady2), new PointF(maxLoadx1, maxLoady1) });
range.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
range.FillStyle = new SimpleCAD.FillStyle(envelopeColor);
Model.Add(range);
if (minForceI < 0 && maxForceI < 0 && minForceI < 0 && minForceJ < 0)
{
SimpleCAD.Polygon poly = new SimpleCAD.Polygon(new PointF[] { new PointF(maxLoadx1, maxLoady1), new PointF(maxLoadx2, maxLoady2), new PointF(x2, y2), new PointF(x1, y1) });
poly.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
poly.FillStyle = new SimpleCAD.FillStyle(negativeColor);
Model.Add(poly);
}
else if (minForceI > 0 && maxForceI > 0 && minForceI > 0 && minForceJ > 0)
{
SimpleCAD.Polygon poly = new SimpleCAD.Polygon(new PointF[] { new PointF(minLoadx1, minLoady1), new PointF(minLoadx2, minLoady2), new PointF(x2, y2), new PointF(x1, y1) });
poly.OutlineStyle = new SimpleCAD.OutlineStyle(Color.Transparent);
poly.FillStyle = new SimpleCAD.FillStyle(positiveColor);
Model.Add(poly);
}
SimpleCAD.Line line1 = new SimpleCAD.Line(minLoadx1, minLoady1, minLoadx2, minLoady2);
line1.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line1);
SimpleCAD.Line line2 = new SimpleCAD.Line(maxLoadx1, maxLoady1, maxLoadx2, maxLoady2);
line2.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line2);
SimpleCAD.Line line3 = new SimpleCAD.Line(x1, y1, x2, y2);
line3.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line3);
SimpleCAD.Line line4 = new SimpleCAD.Line(minLoadx1, minLoady1, x1, y1);
line4.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line4);
SimpleCAD.Line line5 = new SimpleCAD.Line(minLoadx2, minLoady2, x2, y2);
line5.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line5);
SimpleCAD.Line line6 = new SimpleCAD.Line(maxLoadx1, maxLoady1, x1, y1);
line6.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line6);
SimpleCAD.Line line7 = new SimpleCAD.Line(maxLoadx2, maxLoady2, x2, y2);
line7.OutlineStyle = new SimpleCAD.OutlineStyle(DimensionColor);
Model.Add(line7);
}
