public static void UpdateOperatinHistoryMacroLocation(string ipAddress, ushort portNo, short macroLocation, int value)
{
short ret = -20;
ushort focasLibHandle = 0;
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
return;
}
FocasData.WriteMacro(focasLibHandle, macroLocation, value);
FocasLib.cnc_freelibhndl(focasLibHandle);
}
public static int ReadOperatinHistoryDPrintLocation(string ipAddress, ushort portNo, short macroLocation)
{
short ret = -20;
ushort focasLibHandle = 0;
int dprintValue = 0;
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
return(dprintValue);
}
dprintValue = FocasData.ReadMacro(focasLibHandle, macroLocation);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(dprintValue);
}
public static short ReadRunningProgramNumber(string ipAddress, ushort portNo, out short mainProgram)
{
ushort focasLibHandle = 0;
short ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
return(mainProgram = 0);
}
FocasLibBase.ODBPRO odbpro = new FocasLibBase.ODBPRO();
FocasLib.cnc_rdprgnum(focasLibHandle, odbpro);
mainProgram = odbpro.mdata;
FocasLib.cnc_freelibhndl(focasLibHandle);
return(odbpro.data);
}
public static short cnc_freelibhndl(ushort handle)
{
return(FocasLib.cnc_freelibhndl(handle));
}
public static string DownloadProgram(string ipAddress, ushort portNo, int programNo, out bool result, string folderPath, bool isProgramFolderSupports)
{
result = false;
short ret = -20;
int bufsize = 1280;
int dataLength = 0;
ushort focasLibHandle = 0;
string programDownloaded = string.Empty;
string programNoStr = "";
if (isProgramFolderSupports)
{
programNoStr = "O" + programNo;
}
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret + "Not able to connect to CNC machine. Please check the network connection and try again");
return(string.Empty);
}
int count = 0;
ret = short.MinValue;
while (ret != 0 && count < 60)
{
//ret = FocasLib.cnc_upstart3(focasLibHandle, 0, programNo, programNo);
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upstart4(focasLibHandle, 0, Path.GetDirectoryName(folderPath).Replace("\\", "/") + "/" + programNoStr);
}
else
{
ret = FocasLib.cnc_upstart3(focasLibHandle, 0, programNo, programNo);
}
count++;
if (ret == -1)
{
Thread.Sleep(1000);
ret = FocasLib.cnc_upend4(focasLibHandle);
}
}
if (ret == -1)
{
Logger.WriteDebugLog("CNC is busy. Please try after some time.");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(string.Empty);
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upstart3() failed. return value is = " + ret);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(string.Empty);
}
StringBuilder programStr = new StringBuilder(bufsize * 10);
bool endFound = false;
do
{
char[] buf = new char[bufsize + 1];
dataLength = bufsize;
//ret = FocasLib.cnc_upload3(focasLibHandle, ref dataLength, buf);
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upload4(focasLibHandle, ref dataLength, buf);
}
else
{
ret = FocasLib.cnc_upload3(focasLibHandle, ref dataLength, buf);
}
if (ret == 10) // if buffer is empty retry
{
Thread.Sleep(400);
continue;
}
if (ret == -2) //if buffer is in reset mode Write protected on CNC side
{
Logger.WriteErrorLog("Reset or stop request. The data to read is nothing. cnc_upload3() failed. return value is = " + ret);
break;
}
if (ret == 7) //if buffer is in reset mode Write protected on CNC side
{
Logger.WriteErrorLog("Write protected on CNC side.. cnc_upload3() failed. return value is = " + ret);
break;
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
char[] tempBuf = new char[dataLength];
Array.Copy(buf, tempBuf, dataLength);
programStr.Append(tempBuf);
if (buf[dataLength - 1] == '%')
{
result = endFound = true;
break;
}
Thread.Sleep(600);
} while (endFound == false);
if (ret == 7)
{
FocasLib.cnc_freelibhndl(focasLibHandle);
return(string.Empty);
}
//ret = FocasLib.cnc_upend3(focasLibHandle);
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upend4(focasLibHandle);
}
else
{
ret = FocasLib.cnc_upend3(focasLibHandle);
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upend3() failed. return value is = " + ret);
}
if (string.IsNullOrEmpty(Convert.ToString(programStr)))
{
Logger.WriteDebugLog("program is empty.");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(string.Empty);
}
programStr.Replace("\r", "").Replace("\n", "\r\n");
result = true;
FocasLib.cnc_freelibhndl(focasLibHandle);
return(programStr.ToString());
}
//to download use below functions
//cnc_upstart3,cnc_upload3, cnc_upend3
public static bool DownloadOperationHistory(string ipAddress, ushort portNo, string file)
{
short ret = -20;
int bufsize = 1280;
int dataLength = 0;
int programNo = 0;
ushort focasLibHandle = 0;
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
Logger.WriteErrorLog("Not able to connect to CNC machine. Please check the network connection and try again");
return(false);
}
int count = 0;
ret = short.MinValue;
while (ret != 0 && count < 20)
{
ret = FocasLib.cnc_upstart3(focasLibHandle, 7, programNo, programNo);
count++;
if (ret == -1)
{
Thread.Sleep(400);
}
}
if (ret == -1)
{
Logger.WriteErrorLog("CNC is busy. Please try after some time.");
//return false;
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upstart3() failed. return value is = " + ret);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(false);
}
StringBuilder programStr = new StringBuilder(bufsize * 10);
bool endFound = false;
do
{
char[] buf = new char[bufsize + 1];
dataLength = bufsize;
ret = FocasLib.cnc_upload3(focasLibHandle, ref dataLength, buf);
if (ret == 10) // if buffer is empty retry
{
Thread.Sleep(400);
continue;
}
if (ret == -2) //if buffer is in reset mode
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
if (ret == -16)
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upload3() failed.return value is = " + ret);
break;
}
continue;
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
char[] tempBuf = new char[dataLength];
Array.Copy(buf, tempBuf, dataLength);
programStr.Append(tempBuf);
if (buf[dataLength - 1] == '%')
{
endFound = true;
break;
}
Thread.Sleep(100);
} while (endFound == false);
ret = FocasLib.cnc_upend3(focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upend3() failed. return value is = " + ret);
//return false;
}
if (string.IsNullOrEmpty(Convert.ToString(programStr)))
{
Logger.WriteDebugLog("program is empty.");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(false);
}
programStr.Replace("\r", "").Replace("\n", "\r\n");
try
{
File.WriteAllText(file, programStr.ToString());
}
catch (Exception ex)
{
Logger.WriteDebugLog(ex.ToString());
}
FocasLib.cnc_freelibhndl(focasLibHandle);
return(true);
}
public static bool DeletePrograms(string ipAddress, ushort portNo, string programNumber, string folderPath, bool isProgramFolderSupports, bool showMsg = true)
{
short tempProgramNo = 0;
string tempProgramNoStr = "";
if (isProgramFolderSupports == false)
{
short.TryParse(programNumber.TrimStart(new char[] { 'O', ' ' }), out tempProgramNo);
if (tempProgramNo == 0)
{
return(false);
}
}
else
{
tempProgramNoStr = programNumber;
}
bool isdeleted = false;
focas_ret ret;
int ret1 = -1;
ushort focasLibHandle = 0;
ret1 = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret1 != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret1);
Logger.WriteErrorLog("Not able to connect to CNC machine. Please check the network connection and try again");
return(false);
}
if (isProgramFolderSupports == true)
{
string fileName = folderPath + tempProgramNoStr;
ret1 = FocasLib.cnc_pdf_del(focasLibHandle, fileName);
}
else
{
ret1 = FocasLib.cnc_delete(focasLibHandle, tempProgramNo);
}
if (ret1 != 0 && ret1 != 5)
{
Logger.WriteErrorLog("Not able to delete program. Return value = " + ret1);
}
Enum.TryParse <focas_ret>(ret1.ToString(), out ret);
switch (ret)
{
case focas_ret.EW_OK:
if (showMsg)
{
Logger.WriteDebugLog("PROGRAM " + programNumber + " has been deleted.");
// MessageBox.Show("Program " + programNumber + " has been deleted.");
}
isdeleted = true;
break;
case focas_ret.EW_DATA:
Logger.WriteDebugLog("PROGRAM " + programNumber + " doesn't exist.");
//MessageBox.Show("PROGRAM " + programNumber + " doesn't exist.");
break;
case focas_ret.EW_PROT:
Logger.WriteDebugLog("Program " + programNumber + " is PROTECTED.");
break;
case focas_ret.EW_BUSY:
Logger.WriteDebugLog("CNC is busy. Program " + programNumber + " delete REJECTED.");
break;
case focas_ret.EW_PASSWD:
Logger.WriteDebugLog("Specified program number cannot be deleted because the data is protected.");
break;
//case focas_ret.DEL_FAILED:
// break;
}
FocasLib.cnc_freelibhndl(focasLibHandle);
return(isdeleted);
}
public static short DownloadProgram(string ipAddress, ushort portNo, string programNoToDownload, string destSystemFolder, string CNCfolderPath, bool isProgramFolderSupports)
{
int programNo = 0;
string programNoStr = "";
if (isProgramFolderSupports == false)
{
programNo = Convert.ToInt32(programNoToDownload.Replace(" ", "").TrimStart(new char[] { 'O' }));
}
else
{
programNoStr = programNoToDownload;
}
short ret = -20;
int bufsize = 1280;
int dataLength = 0;
ushort focasLibHandle = 0;
string programDownloaded = string.Empty;
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
return(2);
}
int count = 0;
ret = short.MinValue;
while (ret != 0 && count < 100)
{
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upstart4(focasLibHandle, 0, CNCfolderPath + programNoStr);
}
else
{
ret = FocasLib.cnc_upstart3(focasLibHandle, 0, programNo, programNo);
}
count++;
if (ret == -1)
{
Thread.Sleep(200);
}
}
if (ret == -1)
{
Logger.WriteErrorLog("CNC is busy. Please try after some time.");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(3);
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upstart3/4() failed. return value is = " + ret);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(2);
}
StringBuilder programStr = new StringBuilder(bufsize * 10);
bool endFound = false;
do
{
char[] buf = new char[bufsize + 1];
dataLength = bufsize;
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upload4(focasLibHandle, ref dataLength, buf);
}
else
{
ret = FocasLib.cnc_upload3(focasLibHandle, ref dataLength, buf);
}
if (ret == 10) // if buffer is empty retry
{
Thread.Sleep(400);
continue;
}
if (ret == -2) //if buffer is in reset mode Write protected on CNC side
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
if (ret == 7) //if buffer is in reset mode Write protected on CNC side
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upload3() failed. return value is = " + ret);
break;
}
char[] tempBuf = new char[dataLength];
Array.Copy(buf, tempBuf, dataLength);
programStr.Append(tempBuf);
if (buf[dataLength - 1] == '%')
{
endFound = true;
break;
}
Thread.Sleep(100);
} while (endFound == false);
if (ret == 7)
{
FocasLib.cnc_freelibhndl(focasLibHandle);
return(2);
}
if (isProgramFolderSupports)
{
ret = FocasLib.cnc_upend4(focasLibHandle);
}
else
{
ret = FocasLib.cnc_upend3(focasLibHandle);
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_upend34() failed. return value is = " + ret);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(2);
}
if (string.IsNullOrEmpty(Convert.ToString(programStr)))
{
Logger.WriteDebugLog("program is empty.");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(6);
}
programStr.Replace("\r", "").Replace("\n", "\r\n");
// string comments = FindProgramComment(programStr.ToString());
programNoToDownload = string.Format("{0}", isProgramFolderSupports ? programNoStr : "O" + programNo.ToString());
int status = 0;
string version = GetVersion(destSystemFolder, programNoToDownload, programStr, out status);
if (status == 1)
{
Logger.WriteDebugLog(version);
version = string.Empty;
return(0);
}
if (version.ToLower().IndexOf("ERROR") >= 0)
{
Logger.WriteDebugLog("Code Error");
FocasLib.cnc_freelibhndl(focasLibHandle);
return(7);
}
try
{
File.WriteAllText(version, programStr.ToString());
}
catch (Exception ex)
{
Logger.WriteDebugLog(ex.ToString());
}
if (File.Exists(version))
{
programDownloaded = Path.GetFileNameWithoutExtension(version);
Logger.WriteDebugLog(string.Format("Program {0} downloaded/saved successfully.", programDownloaded));
}
FocasLib.cnc_freelibhndl(focasLibHandle);
return(0);
}
//to sent to cnc
//cnc_dwnstart3, cnc_download3, cnc_dwnend3
public static bool UploadProgramHytech(string ipAddress, ushort portNo, string programContentToSend, string folderPath, bool isProgramFolderSupports)
{
short ret = -20;
int len, n;
ushort focasLibHandle = 0;
ret = FocasLib.cnc_allclibhndl3(ipAddress, portNo, 10, out focasLibHandle);
if (ret != 0)
{
Logger.WriteErrorLog("cnc_allclibhndl3() failed. return value is = " + ret);
return(false);
}
int count = 0;
ret = short.MinValue;
while (ret != 0 && count < 100)
{
if (isProgramFolderSupports == false)
{
ret = FocasLib.cnc_dwnstart3(focasLibHandle, 0);
}
else
{
ret = FocasLib.cnc_dwnstart4(focasLibHandle, 0, folderPath);
}
count++;
if (ret == -1)
{
Thread.Sleep(200);
}
}
if (ret == -1)
{
if (isProgramFolderSupports == false)
{
FocasLib.cnc_dwnend(focasLibHandle);
}
else
{
FocasLib.cnc_dwnend4(focasLibHandle);
}
FocasLib.cnc_freelibhndl(focasLibHandle);
Logger.WriteErrorLog("CNC is busy. Please try after some time.");
return(false);
}
if (ret != 0)
{
Logger.WriteErrorLog("cnc_dwnstart3() failed. return value is = " + ret);
FocasLib.cnc_freelibhndl(focasLibHandle);
return(false);
}
if (ret == FocasLib.EW_OK)
{
len = programContentToSend.Length;
while (len > 0)
{
n = programContentToSend.Length;
if (isProgramFolderSupports == false)
{
ret = FocasLib.cnc_download3(focasLibHandle, ref n, programContentToSend);
}
else
{
ret = FocasLib.cnc_download4(focasLibHandle, ref n, programContentToSend);
}
if (ret == 10) //if buffer is empty
{
continue;
}
if (ret == -2) // if buffer in reset mode
{
break;
}
if (ret != FocasLib.EW_OK)
{
Logger.WriteErrorLog("cnc_download3() failed. return value is = " + ret);
break;
}
if (ret == FocasLib.EW_OK)
{
//program += n;
//len -= n;
programContentToSend = programContentToSend.Substring(n, len - n);
len -= n;
}
}
//Thread.Sleep(4000);
if (isProgramFolderSupports == false)
{
ret = FocasLib.cnc_dwnend(focasLibHandle);
}
else
{
ret = FocasLib.cnc_dwnend4(focasLibHandle);
}
if (ret != FocasLib.EW_OK)
{
FocasLibBase.ODBERR a = new FocasLibBase.ODBERR();
FocasLib.cnc_getdtailerr(focasLibHandle, a);
Logger.WriteErrorLog("cnc_dwnend() failed. return value is = " + ret + " ; Error code : " + a.err_no);
FocasLib.cnc_freelibhndl(focasLibHandle);
if (ret != 7)
{
Logger.WriteErrorLog("cnc_dwnend() failed. return value is = " + ret + " ; Error code : " + a.err_no);
}
if (ret == 7)
{
Logger.WriteErrorLog("Upload program failed because write protected on CNC side.");
}
return(false);
}
FocasLib.cnc_freelibhndl(focasLibHandle);
}
return(true);
}