/// <summary>
/// 三相电流（A）
/// </summary>
public float[] Current_All(byte[] address, SerialPort sp)
{
float[] tmp = new float[3];
byte[] _current = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Current_All.ToString());
sp.Write(_current, 0, _current.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
tmp[0] = Utilities.bcd_to_dec(_rcvBuf[14]);
tmp[0] = tmp[0] + Utilities.bcd_to_dec(_rcvBuf[15]) * 100;
tmp[0] = tmp[0] + Utilities.bcd_to_dec(_rcvBuf[16]) * 10000;
tmp[0] /= 10;
tmp[1] = Utilities.bcd_to_dec(_rcvBuf[17]);
tmp[1] = tmp[1] + Utilities.bcd_to_dec(_rcvBuf[18]) * 100;
tmp[1] = tmp[1] + Utilities.bcd_to_dec(_rcvBuf[19]) * 10000;
tmp[1] /= 10;
tmp[2] = Utilities.bcd_to_dec(_rcvBuf[20]);
tmp[2] = tmp[2] + Utilities.bcd_to_dec(_rcvBuf[21]) * 100;
tmp[2] = tmp[2] + Utilities.bcd_to_dec(_rcvBuf[22]) * 10000;
tmp[2] /= 10;
}
return(tmp);
}
/// <summary>
/// 通信波特率
/// </summary>
public int Device_BaudRate(byte[] address, SerialPort sp)
{
int tmp = 3;
byte[] _baudRate = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Device_BaudRate.ToString());
sp.Write(_baudRate, 0, _baudRate.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
tmp = Utilities.bcd_to_dec(_rcvBuf[10]);
}
return(tmp);
}
/// <summary>
/// 剩余电流最大相
/// </summary>
public float Residual_Phase(byte[] address, SerialPort sp)
{
int tmp = 0;
byte[] _residual = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Residual_Phase.ToString());
sp.Write(_residual, 0, _residual.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
tmp = _rcvBuf[14];
}
return(tmp);
}
/// <summary>
/// 额定极限不驱动时间（ms）
/// </summary>
public int Rated_Not_Driving_Time(byte[] address, SerialPort sp)
{
int tmp = 0;
byte[] _residual = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Rated_Not_Driving_Time.ToString());
sp.Write(_residual, 0, _residual.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
tmp = Utilities.bcd_to_dec(_rcvBuf[14]);
tmp = tmp + Utilities.bcd_to_dec(_rcvBuf[15]) * 100;
}
return(tmp);
}
/// <summary>
/// 写通信波特率
/// </summary>
public bool Write_Device_BaudRate(byte[] address, SerialPort sp, int baudrate)
{
byte tmp = 0;
if (baudrate == 600)
{
tmp = 1;
}
else if (baudrate == 1200)
{
tmp = 2;
}
else if (baudrate == 2400)
{
tmp = 3;
}
else if (baudrate == 4800)
{
tmp = 4;
}
else if (baudrate == 9600)
{
tmp = 5;
}
else if (baudrate == 19200)
{
tmp = 6;
}
byte[] _baudRate = CommandMsg.changeBaudRate(address, (byte)CommandMsg.ControlCode.ChangeBaudRate, (byte)CommandMsg.DataFieldLength.ChangeBaudRate, tmp);
sp.Write(_baudRate, 0, _baudRate.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
if (_rcvBuf[8] == 0x97)
{
return(true);
}
else
{
return(false);
}
}
else
{
return(false);
}
}
/// <summary>
/// 读设备号
/// </summary>
public int[] Read_Device_Number(byte[] address, SerialPort sp)
{
int[] tmp = new int[6];
byte[] _deviceNumber = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Device_Number.ToString());
sp.Write(_deviceNumber, 0, _deviceNumber.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
for (int i = 0; i < 6; i++)
{
tmp[i] = Utilities.bcd_to_dec(_rcvBuf[14 + i]);
}
}
return(tmp);
}
/// <summary>
/// 读通讯地址
/// </summary>
public int[] Read_Device_Address(SerialPort sp)
{
int[] tmp = new int[6];
byte[] _readAddr = CommandMsg.readAddress((byte)CommandMsg.ControlCode.ReadAddr, (byte)CommandMsg.DataFieldLength.ReadAddr);
sp.Write(_readAddr, 0, _readAddr.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
for (int i = 0; i < 6; i++)
{
tmp[i] = Utilities.bcd_to_dec(_rcvBuf[10 + i]);
}
}
return(tmp);
}
/// <summary>
/// C相电压（V）
/// </summary>
public float Voltage_C(byte[] address, SerialPort sp)
{
int tmp = 0;
byte[] _voltage = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Voltage_C.ToString());
sp.Write(_voltage, 0, _voltage.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
tmp = Utilities.bcd_to_dec(_rcvBuf[14]);
tmp = tmp + Utilities.bcd_to_dec(_rcvBuf[15]) * 100;
tmp /= 10;
}
return(tmp);
}
private void get_residualLimit()
{
Dictionary <string, string> dict = DID();
CommandMsg dlt = new CommandMsg();
byte[] _ResidualLimit = dlt.readData(_address, (byte)CommandMsg.ControlCode.ReadData, dict["剩余电流超限事件"]);
serialPort1.Write(_ResidualLimit, 0, _ResidualLimit.Length);
if (receive_frame(ref _rcvBuf) == true)
{
fill_datatable_ResidualLimit(ref _rcvBuf);
}
else
{
stalabMBStatus.Text = "剩余电流超限事件读取错误";
}
}
private void get_trip()
{
Dictionary <string, string> dict = DID();
CommandMsg dlt = new CommandMsg();
byte[] _Trip = dlt.readData(_address, (byte)CommandMsg.ControlCode.ReadData, dict["跳闸事件记录"]);
serialPort1.Write(_Trip, 0, _Trip.Length);
if (receive_frame(ref _rcvBuf) == true)
{
fill_datatable_Trip(ref _rcvBuf);
}
else
{
stalabMBStatus.Text = "跳闸事件记录读取错误";
}
}
/// <summary>
/// 额定剩余电流动作值参数组
/// </summary>
public int[] Rated_Residual_Parameter_Group(byte[] address, SerialPort sp)
{
int[] tmp = new int[8];
byte[] _ratedResidual = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Rated_Residual_Parameter_Group.ToString());
sp.Write(_ratedResidual, 0, _ratedResidual.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
for (int i = 0; i < 8; i++)
{
tmp[i] = Utilities.bcd_to_dec(_rcvBuf[14 + i * 2]);
tmp[i] = tmp[i] + Utilities.bcd_to_dec(_rcvBuf[15 + i * 2]) * 100;
}
}
return(tmp);
}
public int[] Residual_All(byte[] address, SerialPort sp)
{
int[] tmp = new int[2];
byte[] _residual = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Residual_All.ToString());
sp.Write(_residual, 0, _residual.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
//剩余电流最大相
tmp[0] = _rcvBuf[14];
//剩余电流值
tmp[1] = Utilities.bcd_to_dec(_rcvBuf[15]);
tmp[1] = tmp[1] + Utilities.bcd_to_dec(_rcvBuf[16]) * 100;
}
return(tmp);
}
private void btnOpen_Click(object sender, EventArgs e)
{
lock (_lock)
{
try
{
Dictionary <string, string> dict = DID();
CommandMsg dlt = new CommandMsg();
byte[] _cmdOpen = dlt.controlCommand(_address, (byte)CommandMsg.ControlCode.Control, (byte)CommandMsg.DataFieldLength.Control, dict["跳闸"]);
serialPort1.Write(_cmdOpen, 0, _cmdOpen.Length);
receive_frame(ref _rcvBuf);
}
catch (Exception ex)
{
offline_process(ex.Message);
}
}
}
/// <summary>
/// 写通讯地址
/// </summary>
public bool Write_Device_Address(byte[] address, SerialPort sp)
{
byte[] _writeAddr = CommandMsg.writeAddress(Utilities.dec_to_bcd(address), (byte)CommandMsg.ControlCode.WriteAddr, (byte)CommandMsg.DataFieldLength.WriteAddr);
sp.Write(_writeAddr, 0, _writeAddr.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
if (_rcvBuf[8] == 0x95)
{
return(true);
}
else
{
return(false);
}
}
else
{
return(false);
}
}
/// <summary>
/// 写设备号
/// </summary>
public bool Write_Device_Number(byte[] address, SerialPort sp, byte[] data)
{
byte[] _deviceNumber = CommandMsg.writeData(address, (byte)CommandMsg.ControlCode.WriteData, (byte)CommandMsg.DataFieldLength.WriteData + 6, MBREG.Device_Number.ToString(), data);
sp.Write(_deviceNumber, 0, _deviceNumber.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
if (_rcvBuf[8] == 0x94)
{
return(true);
}
else
{
return(false);
}
}
else
{
return(false);
}
}
/// <summary>
/// 控制字4
/// </summary>
public string[] Control_Word_4(byte[] address, SerialPort sp)
{
string[] tmp = new string[3];
byte[] _status = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Control_Word4.ToString());
sp.Write(_status, 0, _status.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
if ((_rcvBuf[14] & 0x80) == 0x80)
{
tmp[0] = "有";
}
else
{
tmp[0] = "无";
}
//额定剩余电流动作值
if ((_rcvBuf[14] & 0xF0) == 0)
{
tmp[0] = "档位1";
}
else if ((_rcvBuf[14] & 0xF0) == 0x10)
{
tmp[0] = "档位2";
}
else if ((_rcvBuf[14] & 0xF0) == 0x20)
{
tmp[0] = "档位3";
}
else if ((_rcvBuf[14] & 0xF0) == 0x30)
{
tmp[0] = "档位4";
}
else if ((_rcvBuf[14] & 0xF0) == 0x40)
{
tmp[0] = "档位5";
}
else if ((_rcvBuf[14] & 0xF0) == 0x50)
{
tmp[0] = "档位6";
}
else if ((_rcvBuf[14] & 0xF0) == 0x60)
{
tmp[0] = "档位7";
}
else if ((_rcvBuf[14] & 0xF0) == 0x70)
{
tmp[0] = "档位8";
}
else if ((_rcvBuf[14] & 0xF0) == 0xF0)
{
tmp[0] = "连续可调";
}
else
{
tmp[0] = "保留";
}
//额定极限不驱动时间
if ((_rcvBuf[14] & 0x0C) == 0)
{
tmp[1] = "档位1";
}
else if ((_rcvBuf[14] & 0x0C) == 0x04)
{
tmp[1] = "档位2";
}
else if ((_rcvBuf[14] & 0x0C) == 0x08)
{
tmp[1] = "档位3";
}
else
{
tmp[1] = "连续可调";
}
//剩余电流报警时间
if ((_rcvBuf[14] & 0x03) == 0)
{
tmp[12] = "关闭";
}
else if ((_rcvBuf[14] & 0x0C) == 0x01)
{
tmp[12] = "启用24小时";
}
else if ((_rcvBuf[14] & 0x0C) == 0x02)
{
tmp[12] = "长期启用";
}
else
{
tmp[12] = "保留";
}
}
return(tmp);
}
/// <summary>
/// 运行状态字1
/// </summary>
public string[] Running_Status_1(byte[] address, SerialPort sp)
{
string[] tmp = new string[3];
byte[] _status = CommandMsg.readData(address, (byte)CommandMsg.ControlCode.ReadData, MBREG.Running_Status1.ToString());
sp.Write(_status, 0, _status.Length);
if (CommandMsg.receive_frame(ref _rcvBuf, sp) == true)
{
if ((_rcvBuf[14] & 0x80) == 0x80)
{
tmp[0] = "有";
}
else
{
tmp[0] = "无";
}
if ((_rcvBuf[14] & 0x60) == 0x60)
{
tmp[1] = "跳闸";
}
else if ((_rcvBuf[14] & 0x60) == 0x00)
{
tmp[1] = "合闸";
}
else if ((_rcvBuf[14] & 0x60) == 0x40)
{
tmp[1] = "重合闸";
}
else
{
tmp[1] = "保留";
}
if ((_rcvBuf[14] & 0x1F) == 0x00)
{
tmp[2] = "正常运行";
}
else if ((_rcvBuf[14] & 0x1F) == 0x02)
{
tmp[2] = "剩余电流";
}
else if ((_rcvBuf[14] & 0x1F) == 0x04)
{
tmp[2] = "断零";
}
else if ((_rcvBuf[14] & 0x1F) == 0x05)
{
tmp[2] = "过载";
}
else if ((_rcvBuf[14] & 0x1F) == 0x06)
{
tmp[2] = "短路短延时";
}
else if ((_rcvBuf[14] & 0x1F) == 0x07)
{
tmp[2] = "缺相";
}
else if ((_rcvBuf[14] & 0x1F) == 0x08)
{
tmp[2] = "欠压";
}
else if ((_rcvBuf[14] & 0x1F) == 0x09)
{
tmp[2] = "过压";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0A)
{
tmp[2] = "接地";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0B)
{
tmp[2] = "停电";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0C)
{
tmp[2] = "定时试验";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0D)
{
tmp[2] = "远程";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0E)
{
tmp[2] = "按键试验";
}
else if ((_rcvBuf[14] & 0x1F) == 0x0F)
{
tmp[2] = "闭锁";
}
else if ((_rcvBuf[14] & 0x1F) == 0x12)
{
tmp[2] = "手动";
}
else if ((_rcvBuf[14] & 0x1F) == 0x10)
{
tmp[2] = "互感器故障";
}
else if ((_rcvBuf[14] & 0x1F) == 0x11)
{
tmp[2] = "合闸失败";
}
else if ((_rcvBuf[14] & 0x1F) == 0x13)
{
tmp[2] = "设置更改";
}
else if ((_rcvBuf[14] & 0x1F) == 0x16)
{
tmp[2] = "瞬动";
}
else if ((_rcvBuf[14] & 0x1F) == 0x17)
{
tmp[2] = "分闸失败";
}
else
{
tmp[2] = "保留";
}
}
return(tmp);
}
