public Primitive(Primitive _p)
{
id = Guid.NewGuid().ToString();
type = _p.type;
edges = _p.edges;
nodes = _p.nodes;
CopyNodesAndEdges();
}
// Algorithms from http://www.geometrictools.com/Documentation/MinimalCycleBasis.pdf
// The Minimal Cycle Basis for a Planar Graph by David Eberly
/// <summary>
/// Attempts to find minimal cycles
/// </summary>
public static void ExtractPrimitive(Node _n0, ref List<Node> _nodes, ref List<Edge> _edges, ref List<Primitive> _primitives)
{
List<Node> visited = new List<Node>();
List<Node> sequence = new List<Node>();
EdgeGraphUtility.CheckAdjacentNodes(ref _nodes, ref _edges);
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
return;
}
sequence.Add(_n0);
Node _n1 = GetClockwiseMostAdjacent(null, _n0, ref _nodes);
Node prev = _n0;
Node curr = _n1;
while (curr != null && curr != _n0 && !visited.Contains(curr))
{
sequence.Add(curr);
visited.Add(curr);
Node next = GetCounterClockwiseMostAdjacent(prev, curr, ref _nodes);
prev = curr;
curr = next;
}
if (curr == null)
{
// Filament found, not necessarily rooted at prev
ExtractFilament(prev, EdgeGraphUtility.GetNode(prev.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
else if (curr == _n0)
{
// Minimal cycle found
Primitive primitive = new Primitive(Primitive.PrimitiveType.MinimalCycle);
primitive.nodes.AddRange(sequence);
for (int i = 0; i < sequence.Count; i++)
{
Node n1;
Node n2;
if (i == sequence.Count - 1)
{
n1 = sequence[i];
n2 = sequence[0];
}
else
{
n1 = sequence[i];
n2 = sequence[i + 1];
}
Edge e = EdgeGraphUtility.FindEdgeByNodes(n1, n2, _edges);
if (e != null)
{
primitive.edges.Add(e);
e.isPartOfCycle = true;
}
}
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
if (_n0.adjacents.Count == 1)
{
// Remove the filament rooted at v0
ExtractFilament(_n0, EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
if (_n1.adjacents.Count == 1)
{
// Remove the filament rooted at v1
ExtractFilament(_n1, EdgeGraphUtility.GetNode(_n1.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
_primitives.Add(primitive);
}
else // curr was visited earlier
{
// A cycle has been found, but is not guaranteed to be a minimal cycle.
// This implies v0 is part of a filament
// Locate the starting point for the filament by traversing from v0 away from the initial v1
while (_n0.adjacents.Count == 2)
{
if (_n0.adjacents[0] != _n1.ID)
{
_n1 = _n0;
_n0 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
else
{
_n1 = _n0;
_n0 = EdgeGraphUtility.GetNode(_n0.adjacents[1], ref _nodes);
}
}
ExtractFilament(_n0, _n1, ref _nodes, ref _edges, ref _primitives);
}
}
/// <summary>
/// Extracts filament consisting of nodes and edges
/// </summary>
public static void ExtractFilament(Node _n0, Node _n1, ref List<Node> _nodes, ref List<Edge> _edges, ref List<Primitive> _primitives)
{
Edge e = EdgeGraphUtility.FindEdgeByNodes(_n0, _n1, _edges);
if (e != null && e.isPartOfCycle)
{
if (_n0.adjacents.Count >= 3)
{
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
_n0 = _n1;
if (_n0.adjacents.Count == 1) _n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
while (_n0.adjacents.Count == 1)
{
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
Edge ee = EdgeGraphUtility.FindEdgeByNodes(_n0, _n1, _edges);
if (ee != null && e.isPartOfCycle)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
}
else
break;
}
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
}
}
else
{
Primitive primitive = new Primitive(Primitive.PrimitiveType.Filament);
if (_n0.adjacents.Count >= 3)
{
primitive.nodes.Add(_n0);
primitive.edges.Add(e);
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
_n0 = _n1;
if (_n0.adjacents.Count == 1) _n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
while (_n0.adjacents.Count == 1)
{
primitive.nodes.Add(_n0);
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
Edge _e = EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
if (_e != null) primitive.edges.Add(_e);
_n0 = _n1;
}
primitive.nodes.Add(_n0);
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
}
_primitives.Add(primitive);
}
}
void ProcessSubPrimitives(Primitive p)
{
if (p.subEdges == null || p.subEdges.Count <= 0) return;
// Copy local lists from primitive's sub nodes and edges
List<Node> _nodes = new List<Node>();
List<Edge> _edges = new List<Edge>();
EdgeGraphUtility.CopyNodesAndEdges(p.subNodes, p.subEdges, out _nodes, out _edges);
EdgeGraphUtility.CheckAdjacentNodes(ref _nodes, ref _edges);
//subPrimitives = new List<Primitive>();
List<Primitive> _subPrimitives = new List<Primitive>();
// Extract primitives inside main primitives
try
{
MinimalCycle.Extract(ref _nodes, ref _edges, ref _subPrimitives);
}
catch (Exception e)
{
Debug.LogWarning("Graph::GeneratePrimitiveSubPrimitives() - Error while extracting primitives: " + e.Message);
return;
}
_subPrimitives.ForEach((sp) =>
{
sp.Process();
});
for (int i = _subPrimitives.Count - 1; i >= 0; i--)
{
if (!_subPrimitives[i].EvaluationResult)
_subPrimitives.RemoveAt(i);
}
_subPrimitives.ForEach((sp) =>
{
sp.parent = p.ID;
GameObject subGraphObj = new GameObject("SubGraph");
subGraphObj.transform.SetParent(transform);
subGraphObj.transform.localPosition = Vector3.zero;
subGraphObj.transform.localScale = Vector3.one;
Graph subGraph = subGraphObj.AddComponent<Graph>();
subGraph.GraphID = Guid.NewGuid().GetHashCode();
subGraphObj.name += subGraph.GraphID;
subGraph.nodes = new List<Node>();
foreach (var node in sp.nodes)
{
subGraph.nodes.Add(node);
}
subGraph.edges = new List<Edge>();
foreach (var edge in sp.edges)
{
edge.Width = 0f;
subGraph.edges.Add(edge);
}
subGraph.ProcessMinimalCycles();
subGraph.mainPrimitives[0].parent = p.ID;
subGraphs.Add(subGraph);
//subPrimitives.Add(subGraph.mainPrimitives[0]);
FacadeBuilder builder = GetComponent<FacadeBuilder>();
if (builder != null)
{
FacadeBuilder subBuilder = subGraph.gameObject.AddComponent<FacadeBuilder>();
subBuilder.inSet = builder.inSet;
subBuilder.facadeStretchPrefab = builder.facadeStretchPrefab;
subBuilder.facadePrefabs = builder.facadePrefabs;
subBuilder.roofMiddleMaterial = builder.roofMiddleMaterial;
subBuilder.roofSideMaterial = builder.roofSideMaterial;
subBuilder.roofHeight = builder.roofHeight;
subBuilder.roofMiddleAddHeight = builder.roofMiddleAddHeight;
subBuilder.roofAccentWidth = builder.roofAccentWidth;
}
FootprintPlacer placer = GetComponent<FootprintPlacer>();
if (placer != null)
{
FootprintPlacer _placer = subGraph.gameObject.AddComponent<FootprintPlacer>();
_placer.footprintPrefabsOnEdge = placer.footprintPrefabsOnEdge;
_placer.footprintPrefabsInside = placer.footprintPrefabsInside;
_placer.UpdateData();
}
});
}
void GenerateSubEdges(int seed, Primitive p)
{
p.Generate(seed);
}
void ClearSubPrimitives(Primitive p)
{
//for (int i = 0; i < subPrimitives.Count; i++)
//{
// if (subPrimitives[i].parent == p.ID)
// {
// subPrimitives[i].subNodes = new List<Node>();
// subPrimitives[i].subEdges = new List<Edge>();
// subPrimitives.RemoveAt(i);
// i--;
// }
//}
for (int i = 0; i < subGraphs.Count; i++)
{
if (subGraphs[i] == null)
{
subGraphs.RemoveAt(i);
i--;
continue;
}
if (subGraphs[i].mainPrimitives[0].parent == p.ID)
{
DestroyImmediate(subGraphs[i].gameObject);
subGraphs.RemoveAt(i);
i--;
}
}
}
// Algorithms from http://www.geometrictools.com/Documentation/MinimalCycleBasis.pdf
// The Minimal Cycle Basis for a Planar Graph by David Eberly
/// <summary>
/// Attempts to find minimal cycles
/// </summary>
public static void ExtractPrimitive(Node _n0, ref List <Node> _nodes, ref List <Edge> _edges, ref List <Primitive> _primitives)
{
List <Node> visited = new List <Node>();
List <Node> sequence = new List <Node>();
EdgeGraphUtility.CheckAdjacentNodes(ref _nodes, ref _edges);
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
return;
}
sequence.Add(_n0);
Node _n1 = GetClockwiseMostAdjacent(null, _n0, ref _nodes);
Node prev = _n0;
Node curr = _n1;
while (curr != null && curr != _n0 && !visited.Contains(curr))
{
sequence.Add(curr);
visited.Add(curr);
Node next = GetCounterClockwiseMostAdjacent(prev, curr, ref _nodes);
prev = curr;
curr = next;
}
if (curr == null)
{
// Filament found, not necessarily rooted at prev
ExtractFilament(prev, EdgeGraphUtility.GetNode(prev.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
else if (curr == _n0)
{
// Minimal cycle found
Primitive primitive = new Primitive(Primitive.PrimitiveType.MinimalCycle);
primitive.nodes.AddRange(sequence);
for (int i = 0; i < sequence.Count; i++)
{
Node n1;
Node n2;
if (i == sequence.Count - 1)
{
n1 = sequence[i];
n2 = sequence[0];
}
else
{
n1 = sequence[i];
n2 = sequence[i + 1];
}
Edge e = EdgeGraphUtility.FindEdgeByNodes(n1, n2, _edges);
if (e != null)
{
primitive.edges.Add(e);
e.isPartOfCycle = true;
}
}
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
if (_n0.adjacents.Count == 1)
{
// Remove the filament rooted at v0
ExtractFilament(_n0, EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
if (_n1.adjacents.Count == 1)
{
// Remove the filament rooted at v1
ExtractFilament(_n1, EdgeGraphUtility.GetNode(_n1.adjacents[0], ref _nodes), ref _nodes, ref _edges, ref _primitives);
}
_primitives.Add(primitive);
}
else // curr was visited earlier
{
// A cycle has been found, but is not guaranteed to be a minimal cycle.
// This implies v0 is part of a filament
// Locate the starting point for the filament by traversing from v0 away from the initial v1
while (_n0.adjacents.Count == 2)
{
if (_n0.adjacents[0] != _n1.ID)
{
_n1 = _n0;
_n0 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
else
{
_n1 = _n0;
_n0 = EdgeGraphUtility.GetNode(_n0.adjacents[1], ref _nodes);
}
}
ExtractFilament(_n0, _n1, ref _nodes, ref _edges, ref _primitives);
}
}
/// <summary>
/// Extracts filament consisting of nodes and edges
/// </summary>
public static void ExtractFilament(Node _n0, Node _n1, ref List <Node> _nodes, ref List <Edge> _edges, ref List <Primitive> _primitives)
{
Edge e = EdgeGraphUtility.FindEdgeByNodes(_n0, _n1, _edges);
if (e != null && e.isPartOfCycle)
{
if (_n0.adjacents.Count >= 3)
{
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
_n0 = _n1;
if (_n0.adjacents.Count == 1)
{
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
}
while (_n0.adjacents.Count == 1)
{
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
Edge ee = EdgeGraphUtility.FindEdgeByNodes(_n0, _n1, _edges);
if (ee != null && e.isPartOfCycle)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
}
else
{
break;
}
}
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
}
}
else
{
Primitive primitive = new Primitive(Primitive.PrimitiveType.Filament);
if (_n0.adjacents.Count >= 3)
{
primitive.nodes.Add(_n0);
primitive.edges.Add(e);
EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
_n0 = _n1;
if (_n0.adjacents.Count == 1)
{
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
}
}
while (_n0.adjacents.Count == 1)
{
primitive.nodes.Add(_n0);
_n1 = EdgeGraphUtility.GetNode(_n0.adjacents[0], ref _nodes);
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
Edge _e = EdgeGraphUtility.RemoveEdgeAndCleanAdjacents(_n0, _n1, ref _nodes, ref _edges);
if (_e != null)
{
primitive.edges.Add(_e);
}
_n0 = _n1;
}
primitive.nodes.Add(_n0);
if (_n0.adjacents.Count == 0)
{
EdgeGraphUtility.RemoveNodeAndCleanAdjacents(_n0, ref _nodes, ref _edges);
}
_primitives.Add(primitive);
}
}
