public override void OnMouseDown(int Button, int Shift, int X, int Y)
{
if (Button == 2)
{
return;
}
INewLineFeedback pLineFeed;
if (m_point_From == null)
{
m_point_From = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//拖拽效果
m_pFeedback = new NewLineFeedbackClass();
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.Start(m_point_From);
if (m_pFeedback != null)
{
m_pFeedback.Display = m_hookHelper.ActiveView.ScreenDisplay;
}
}
else if (m_point_To == null)
{
m_point_To = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//添加拖拽点
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.AddPoint(m_point_To);
}
else if (m_point_Center == null)
{
m_point_Center = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//添加拖拽点
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.AddPoint(m_point_Center);
pLineFeed.Stop();
ESRI.ArcGIS.Geometry.ICircularArc circularArc = new ESRI.ArcGIS.Geometry.CircularArcClass();
circularArc.PutCoords(m_point_Center, m_point_From, m_point_To, ESRI.ArcGIS.Geometry.esriArcOrientation.esriArcClockwise);
DrawCircleByCenterAndRadius(m_pCurrentLayer, circularArc, m_hookHelper.ActiveView.ScreenDisplay);
//画完后清空
m_point_From = null;
m_point_To = null;
m_point_Center = null;
}
}
public override void OnMouseDown(int Button, int Shift, int X, int Y)
{
if (Button == 2) return;
INewLineFeedback pLineFeed;
if (m_point_From == null)
{
m_point_From = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//��קЧ��
m_pFeedback = new NewLineFeedbackClass();
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.Start(m_point_From);
if (m_pFeedback != null)
m_pFeedback.Display = m_hookHelper.ActiveView.ScreenDisplay;
}
else if (m_point_To == null)
{
m_point_To = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//�����ק��
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.AddPoint(m_point_To);
}
else if (m_point_Center == null)
{
m_point_Center = m_hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(X, Y);
//�����ק��
pLineFeed = (INewLineFeedback)m_pFeedback;
pLineFeed.AddPoint(m_point_Center);
pLineFeed.Stop();
ESRI.ArcGIS.Geometry.ICircularArc circularArc = new ESRI.ArcGIS.Geometry.CircularArcClass();
circularArc.PutCoords(m_point_Center, m_point_From, m_point_To, ESRI.ArcGIS.Geometry.esriArcOrientation.esriArcClockwise);
DrawCircleByCenterAndRadius(m_pCurrentLayer, circularArc, m_hookHelper.ActiveView.ScreenDisplay);
//��������
m_point_From = null;
m_point_To = null;
m_point_Center = null;
}
}
protected override void OnClick()
{
IEditor pEd = (IEditor)ArcMap.Editor;
IEditor2 pEd2 = (IEditor2)ArcMap.Editor;
IEditProperties pEdProps1 = pEd as IEditProperties;
IEditProperties2 pEdProps2 = pEd as IEditProperties2;
IEditSketch2 pSketch2 = ArcMap.Editor as IEditSketch2;
ISegmentCollection pSegColl = pSketch2.Geometry as ISegmentCollection;
double dLineDirection = 0;
ISketchTool sketchTool = ArcMap.Application.CurrentTool.Command as ISketchTool;
if (sketchTool.Constraint == esriSketchConstraint.esriConstraintAngle)
{
dLineDirection = sketchTool.AngleConstraint;
}
else
{
ILine pRubberBandLine = new LineClass();
pRubberBandLine.PutCoords(pSketch2.LastPoint, pEd2.Location);
dLineDirection = pRubberBandLine.Angle;
}
IAngularConverter pAngConv = new AngularConverterClass();
pAngConv.SetAngle(dLineDirection, esriDirectionType.esriDTPolar, esriDirectionUnits.esriDURadians);
int iSegCnt = pSegColl.SegmentCount;
dlgSpiralParameters SpiralEntryDialog = new dlgSpiralParameters();
string sBearing = pAngConv.GetString(pEdProps2.DirectionType, pEdProps2.DirectionUnits, pEdProps2.AngularUnitPrecision);
SpiralEntryDialog.txtDirection.Text = sBearing;
//Display the dialog
DialogResult pDialogResult = SpiralEntryDialog.ShowDialog();
esriCurveDensifyMethod DensifyMethod = esriCurveDensifyMethod.esriCurveDensifyByAngle; //default
double dDensifyParameter = 2 * Math.PI / 180; //2 degrees //default
if (SpiralEntryDialog.optCustomDensification.Checked)
{
DensifyMethod = (esriCurveDensifyMethod)SpiralEntryDialog.cboDensificationType.SelectedIndex;
if (DensifyMethod == esriCurveDensifyMethod.esriCurveDensifyByAngle)
{
dDensifyParameter = Convert.ToDouble(SpiralEntryDialog.numAngleDensification.Value) * Math.PI / 180;
}
else
{
if (!Double.TryParse(SpiralEntryDialog.txtDensifyValue.Text, out dDensifyParameter))
{
dDensifyParameter = 2;
}
}
}
if (pDialogResult != DialogResult.OK)
{
return;
}
if (SpiralEntryDialog.txtStartRadius.Text.ToLower().Trim() == "infinity" && SpiralEntryDialog.txtEndRadius.Text.ToLower().Trim() == "infinity")
{
return;
}
double dSpiralRadius1 = Double.MaxValue; //default to infinity
double dFromCurvature = 0;
if (SpiralEntryDialog.txtStartRadius.Text.ToLower() != "infinity")
{
if (Double.TryParse(SpiralEntryDialog.txtStartRadius.Text, out dSpiralRadius1))
{
dFromCurvature = 1 / dSpiralRadius1;
}
else
{
return;
}
}
double dSpiralRadius2 = Double.MaxValue; //default to infinity
double dToCurvature = 0;
if (SpiralEntryDialog.txtEndRadius.Text.ToLower() != "infinity")
{
if (Double.TryParse(SpiralEntryDialog.txtEndRadius.Text, out dSpiralRadius2))
{
dToCurvature = 1 / dSpiralRadius2;
}
else
{
return;
}
}
bool bIsCCW = (dSpiralRadius1 > dSpiralRadius2) ? SpiralEntryDialog.optRight.Checked : SpiralEntryDialog.optLeft.Checked;
bool bSpecialCaseCircularArc = (dSpiralRadius1 == dSpiralRadius2);
if (!pAngConv.SetString(SpiralEntryDialog.txtDirection.Text, pEdProps2.DirectionType, pEdProps2.DirectionUnits))
{
return;
}
double dNorthAzimuthRadians = pAngConv.GetAngle(esriDirectionType.esriDTNorthAzimuth, esriDirectionUnits.esriDURadians);
IVector3D pVec = new Vector3DClass();
pVec.PolarSet(dNorthAzimuthRadians, 0, 500);
IPoint pTangentPoint = new PointClass();
pTangentPoint.PutCoords(pSketch2.LastPoint.X + pVec.XComponent, pSketch2.LastPoint.Y + pVec.YComponent);
//double dStreamingTol = pEdProps1.StreamTolerance;
//if (dStreamingTol == 0)
// dStreamingTol = 0.001 * 5000; //metric
//double dSpiralOffsetGeometryPrecision = 0.001 * 250; //metric 0.25 m
IPolyline6 theSpiralPolyLine = null;
double dExitTangent = 0;
if (SpiralEntryDialog.cboPathLengthParameter.SelectedIndex == 0)
{
double dSpiralArcLength;
if (!Double.TryParse(SpiralEntryDialog.txtPathLengthParameter.Text, out dSpiralArcLength))
{
return;
}
if (bSpecialCaseCircularArc)
{
ILine pInTangentLine = new LineClass();
pInTangentLine.PutCoords(pSketch2.LastPoint, pTangentPoint);
ISegment pTangentSegment = (ISegment)pInTangentLine;
IConstructCircularArc2 pCircArcConstr = new ESRI.ArcGIS.Geometry.CircularArcClass() as IConstructCircularArc2;
pCircArcConstr.ConstructTangentRadiusArc(pTangentSegment, false, bIsCCW, dSpiralRadius1, dSpiralArcLength);
ICircularArc pArcSegment = pCircArcConstr as ICircularArc;
//Get chord Line from tangent curve constructor
ILine pChordLine = new LineClass();
pChordLine.PutCoords(pArcSegment.FromPoint, pArcSegment.ToPoint);
double dPolarRadians = pChordLine.Angle; //to get the chord azimuth
pCircArcConstr.ConstructBearingRadiusArc(pSketch2.LastPoint, dPolarRadians, bIsCCW, dSpiralRadius1, dSpiralArcLength);
dExitTangent = pArcSegment.ToAngle + Math.PI / 2;
ISegmentCollection segCollection = new PolylineClass() as ISegmentCollection;
object obj = Type.Missing;
segCollection.AddSegment((ISegment)pArcSegment, ref obj, ref obj);
theSpiralPolyLine = segCollection as IPolyline6;
}
else
{
theSpiralPolyLine = ConstructSpiralbyLength(pSketch2.LastPoint, pTangentPoint, dFromCurvature, dToCurvature, bIsCCW, dSpiralArcLength,
DensifyMethod, dDensifyParameter, out dExitTangent);
}
}
if (SpiralEntryDialog.cboPathLengthParameter.SelectedIndex == 1)
{
if (!pAngConv.SetString(SpiralEntryDialog.txtPathLengthParameter.Text, esriDirectionType.esriDTPolar, pEdProps2.DirectionUnits))
{
return;
}
double dSpiralDeltaAngle = pAngConv.GetAngle(esriDirectionType.esriDTPolar, esriDirectionUnits.esriDURadians);
if (bSpecialCaseCircularArc)
{
ILine pInTangentLine = new LineClass();
pInTangentLine.PutCoords(pSketch2.LastPoint, pTangentPoint);
ISegment pTangentSegment = (ISegment)pInTangentLine;
IConstructCircularArc2 pCircArcConstr = new ESRI.ArcGIS.Geometry.CircularArcClass() as IConstructCircularArc2;
pCircArcConstr.ConstructTangentRadiusAngle(pTangentSegment, false, bIsCCW, dSpiralRadius1, dSpiralDeltaAngle);
ICircularArc pArcSegment = pCircArcConstr as ICircularArc;
//Get chord Line from tangent curve constructor
ILine pChordLine = new LineClass();
pChordLine.PutCoords(pArcSegment.FromPoint, pArcSegment.ToPoint);
double dPolarRadians = pChordLine.Angle; //to get the chord azimuth
pCircArcConstr.ConstructBearingRadiusAngle(pSketch2.LastPoint, dPolarRadians, bIsCCW, dSpiralRadius1, dSpiralDeltaAngle);
dExitTangent = pArcSegment.ToAngle + Math.PI / 2;
ISegmentCollection segCollection = new PolylineClass() as ISegmentCollection;
object obj = Type.Missing;
segCollection.AddSegment((ISegment)pArcSegment, ref obj, ref obj);
theSpiralPolyLine = segCollection as IPolyline6;
}
else
{
theSpiralPolyLine = ConstructSpiralbyDeltaAngle(pSketch2.LastPoint, pTangentPoint, dFromCurvature, dToCurvature, bIsCCW, dSpiralDeltaAngle,
DensifyMethod, dDensifyParameter, out dExitTangent);
}
}
if (theSpiralPolyLine == null)
{
MessageBox.Show("A spiral could not be created with the entered parameters.");
return;
}
ISegmentCollection pSpiralSegCollection = theSpiralPolyLine as ISegmentCollection;
//Start a sketch operation and insert the new envelope into the sketch
ISketchOperation2 sketchOp = new SketchOperationClass();
sketchOp.Start(ArcMap.Editor);
sketchOp.MenuString = "Add Spiral";
pSegColl.AddSegmentCollection(pSpiralSegCollection);
IGeometry geom = pSegColl as IGeometry;
pSketch2.Geometry = geom;
//set the angle constraint to the exit tangent of the spiral
sketchTool.Constraint = esriSketchConstraint.esriConstraintAngle;
sketchTool.AngleConstraint = dExitTangent;
sketchOp.Finish(ArcMap.Document.ActiveView.Extent, esriSketchOperationType.esriSketchOperationGeneral, null);
}
