public static SMBIOSStructure BeginParseSMBIOS()
{
byte *memPtr = SMBIOS.SearchEntryPointTable();
EntryPointTable entry = new EntryPointTable();
//We dont return an address since we need to use a pointer that
//its inside the table
entry.Parse(memPtr);
//entry.GetTableAddress();
SMBIOSStructure smbiosStructure = SMBIOS.ParseStructures(entry);
smbiosStructure.EntryPointTable = entry;
return(smbiosStructure);
}
//We go byte by byte MANUALLY to parse the table.
//The field that is assigned is autodocumented
//We use the BitConverter for words and qwords (2 bytes and 8 bytes, respectively);
public override byte *Parse()
{
byte *newAddress = BeginningAddress;
int i;
int j;
//Begin the header parse
this.Type = BeginningAddress[0];
this.Length = BeginningAddress[1];
byte[] tmp = new byte[2];
tmp[0] = BeginningAddress[2];
tmp[1] = BeginningAddress[3];
this.Handle = BitConverter.ToUInt16(tmp, 0);
//Create a new byte array in which we will do the parsing
//This array will contain the formatted section of the table
byte[] parseArray = new byte[Convert.ToInt32(this.Length)];
for (int k = 0; k < this.Length; k++)
{
//Copy the formatted section byte to byte
parseArray[k] = BeginningAddress[k];
}
//Start parsing the formatted section using the previously created array
//We do a 'best effort parse' which means that we parse until we go out of bounds of the array
//Then we finish with an exception
//This has two main advantages:
//1. No need to check for versions since we do the parsing in function of the length
//2. The parsing is quite robust since we do using the length parameter (which we assume it is
//always right)
//TODO: method for this try
try
{
VendorID = parseArray[4];
VersionID = parseArray[5];
tmp[0] = parseArray[6];
tmp[1] = parseArray[7];
StartingAddressSegment = BitConverter.ToUInt16(tmp, 0);
ReleaseDateID = parseArray[8];
ROMSize = parseArray[9];
tmp = new byte[8];
for (int k = 0; k < 8; k++)
{
//Since we left in 10...
tmp[k] = parseArray[k + 10];
}
Characteristics = BitConverter.ToUInt64(tmp, 0);
//Begin to parse the optional characteristics
//Since it is an optional field, we need to calculate its size first
//Formula: Length - 12h == Length - 18
//var size = Length - 18;
// I dont know if the specification is incorrect but i count 22 bytes, not 18 (you must
// count the system bios bytes and firmware (since they are 22 bytes).
// Might be a misintrepretation of the specification
var size = Length - 22;
// If there is no optional characteristic, skip
if (size > 0)
{
OptionalCharacteristics = new byte[size];
//We start whre we left (18)
for (int k = 0; k < size; k++)
{
OptionalCharacteristics[k] = parseArray[k + 18];
}
}
SystemBiosMajorRelease = parseArray[size + 18];
SystemBiosMinorRelease = parseArray[size + 19];
EmbeddedControllerFirmwareMajorRelease = parseArray[size + 20];
EmbeddedControllerFirmwareMinorRelease = parseArray[size + 21];
//This will not work in bochs since its version is 2.4
size += 2;
tmp = new byte[2];
tmp[0] = parseArray[size + 22];
tmp[1] = parseArray[size + 23];
ExtendedBiosROMSize = BitConverter.ToUInt16(tmp, 0);
}
catch (IndexOutOfRangeException ex) { }
//We have finished parsing the formatted area so we need to recompute the pointer
//We start now the unformatted area
//NOTE: we cannot sum this.Length directly. Gives IL2CPU error.
newAddress = BeginningAddress + Convert.ToInt32(this.Length);
//Parse the first string
int[] tmpArray = new int[3];
tmpArray[0] = VendorID;
tmpArray[1] = ReleaseDateID;
tmpArray[2] = VersionID;
//TODO: method for this
for (int q = 0; q < 3; q++)
{
for (int w = 1; w < 3 - q; w++)
{
if (tmpArray[w - 1] > tmpArray[w])
{
var tmp2 = tmpArray[w - 1];
tmpArray[w - 1] = tmpArray[w];
tmpArray[w] = tmp2;
}
}
}
//Array of strings from the formatted section
string[] stringArray = SMBIOS.ParseStrings(newAddress);
int iteration = -1;
foreach (int t in tmpArray)
{
if (t == 255 | t == 0)
{
continue;
}
//We increment the index first so the first string is 0
//The numbers doesn't have to be correlative i.e
//Doesn;'t have to be 1,2,3 it could be 1,2,15
//Thus, we cannot use t to index the array
iteration++;
if (t == VendorID)
{
Vendor = stringArray[iteration];
}
else if (t == ReleaseDateID)
{
ReleaseDate = stringArray[iteration];
}
else if (t == VersionID)
{
Version = stringArray[iteration];
}
else
{
continue;
}
}
//We need to recompute the pointer after parsing.
return(SMBIOS.RecomputePointer(newAddress, stringArray));
}
public override unsafe byte *Parse()
{
byte *currentAddress;
//We need a function to do parse a word
//Parse the header
Type = beginningAddress[0];
Length = beginningAddress[1];
byte[] tmp = new byte[2];
tmp[0] = beginningAddress[2];
tmp[1] = beginningAddress[3];
Handle = BitConverter.ToUInt16(tmp, 0);
//Create the array in which we will do the parsing
//Se biosInfo.cs comment
//byte[] parseArray = new byte[Convert.ToInt32(this.Length)];
byte[] parseArray = new byte[this.Length];
for (int i = 0; i < this.Length; i++)
{
parseArray[i] = beginningAddress[i];
}
//Parse using parseArray
try
{
SocketDesignationID = parseArray[4];
ProcessorType = parseArray[5];
ProcessorFamily = parseArray[6];
ProcessorManufacturerID = parseArray[7];
tmp = new byte[8];
for (int i = 0; i < 8; i++)
{
tmp[i] = parseArray[i + 8];
}
ProcessorID = BitConverter.ToUInt64(tmp, 0);
//Processor id is the result of doing the CPUID instruction in x86
//Processor ID (in x86) its compound of two parts
//The first DWORD is the EAX part when the EAX part is put to 1
//The second DWORD is the EDX part.
//Store the EAX part of ProcessorID (since in x86 its as doing a CPUID instruction)
tmp = new byte[4];
for (int i = 0; i < 4; i++)
{
tmp[i] = parseArray[i + 8];
}
CPUIDEAX = BitConverter.ToUInt32(tmp, 0);
//Store the EDX part of ProcessorID
tmp = new byte[4];
for (int i = 4; i < 8; i++)
{
tmp[i - 4] = parseArray[i + 8];
}
CPUIDEDX = BitConverter.ToUInt32(tmp, 0);
ProcessorVersionID = parseArray[16];
Voltage = parseArray[17];
tmp = new byte[2];
tmp[0] = parseArray[18];
tmp[1] = parseArray[19];
ExternalClock = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[20];
tmp[1] = parseArray[21];
MaxSpeed = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[22];
tmp[1] = parseArray[23];
CurrentSpeed = BitConverter.ToUInt16(tmp, 0);
Status = parseArray[24];
ProcessorUpgrade = parseArray[25];
tmp = new byte[2];
tmp[0] = parseArray[26];
tmp[1] = parseArray[27];
L1HandleCache = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[28];
tmp[1] = parseArray[29];
L2HandleCache = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[30];
tmp[1] = parseArray[31];
L3HandleCache = BitConverter.ToUInt16(tmp, 0);
SerialNumberID = parseArray[32];
AssetTagID = parseArray[33];
PartNumberID = parseArray[34];
CoreCount = parseArray[35];
CoreEnabled = parseArray[36];
ThreadCount = parseArray[37];
tmp = new byte[2];
tmp[0] = parseArray[38];
tmp[1] = parseArray[39];
ProcessorCharacteristics = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[40];
tmp[1] = parseArray[41];
ProcessorFamily2 = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[42];
tmp[1] = parseArray[43];
CoreCount2 = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[44];
tmp[1] = parseArray[45];
CoreEnabled2 = BitConverter.ToUInt16(tmp, 0);
tmp = new byte[2];
tmp[0] = parseArray[46];
tmp[1] = parseArray[47];
ThreadCount2 = BitConverter.ToUInt16(tmp, 0);
}
catch (IndexOutOfRangeException ex)
{
}
currentAddress = beginningAddress + Convert.ToInt32(Length);
var stringArray = SMBIOS.ParseStrings(currentAddress);
StoreStrings(stringArray);
return(SMBIOS.RecomputePointer(currentAddress, stringArray));
}