public void Undo_ModifyObjectData(int l_unexcute_scrl, ICommand command)
        {
            ///<summary>
            /// This code is to undo the modification action which the user has performed
            /// </summary>

            #region Undoing the modification
            try
            {
                SuspensionCoordinatesRear _scrl_forUndo = (SuspensionCoordinatesRear)command;

                ICommand cmd = Assy_List_SCRL[l_unexcute_scrl];
                Assy_List_SCRL[l_unexcute_scrl]._RedocommandsSCRL.Push(cmd);

                Assy_List_SCRL[l_unexcute_scrl] = _scrl_forUndo;

                PopulateDataTable(l_unexcute_scrl);

                SuspensionCoordinatesRearGUI.DisplaySCRLItem(Assy_List_SCRL[l_unexcute_scrl]);

                #region Calling Undo method for Opposite Suspension if symmetric
                if (Assy_List_SCRL[l_unexcute_scrl].RearSymmetry == true && IsUndoRedoCalledByRight == false)
                {
                    SuspensionCoordinatesRearRight.IsUndoRedoCalledByLeft_IdentifierMethod(true);// This method sets the IsUndoRedoCalledByLeft variable to true and prevents an infinte loop

                    UndoRedo undoRedo = new UndoRedo();
                    undoRedo.Identifier(SuspensionCoordinatesRearRight.Assy_List_SCRR[l_unexcute_scrl]._UndocommandsSCRR, SuspensionCoordinatesRearRight.Assy_List_SCRR[l_unexcute_scrl]._RedocommandsSCRR,
                                        l_unexcute_scrl + 1, SuspensionCoordinatesRearRight.Assy_List_SCRR[l_unexcute_scrl].SCRRIsModified);
                    undoRedo.Undo(1);
                    SuspensionCoordinatesRearRight.IsUndoRedoCalledByLeft_IdentifierMethod(false);//This method sets the value of IsUndoRedoCalledByLeft to false so that the Right Suspension coordinate can also be Undone
                }
                #endregion

                Kinematics_Software_New.EditRearCAD(l_unexcute_scrl);

                Kinematics_Software_New.SCRL_ModifyInVehicle(l_unexcute_scrl, Assy_List_SCRL[l_unexcute_scrl]);
            }
            catch (Exception) { }
            #endregion
        }
        public void ModifyObjectData(int l_modify_SCFL, object modify_scfl_list, bool redo_Identifier)
        {
            ///<summary>
            ///In this section of the code, the Suspension is bring modified and it is placed under the method called ModifyObjectData because it is an Undoable operation
            ///</summary>

            #region Redo the Modification
            SuspensionCoordinatesFront _scfl_forRedo = (SuspensionCoordinatesFront)modify_scfl_list;

            ICommand cmd = Assy_List_SCFL[l_modify_SCFL];
            Assy_List_SCFL[l_modify_SCFL]._UndocommandsSCFL.Push(cmd);

            Assy_List_SCFL[l_modify_SCFL] = _scfl_forRedo;

            PopulateDataTable(l_modify_SCFL);

            Assy_List_SCFL[l_modify_SCFL].SCFLIsModified = true;

            SuspensionCoordinatesFrontGUI.DisplaySCFLItem(Assy_List_SCFL[l_modify_SCFL]);

            #region Calling Redo method for Opposite Suspension if symmetric
            if (Assy_List_SCFL[l_modify_SCFL].FrontSymmetry == true && IsUndoRedoCalledByRight == false)
            {
                SuspensionCoordinatesFrontRight.IsUndoRedoCalledByLeft_IdentifierMethod(true);// This method sets the IsUndoRedoCalledByLeft variable to true and prevents an infinte loop

                UndoRedo undoRedo = new UndoRedo();
                undoRedo.Identifier(SuspensionCoordinatesFrontRight.Assy_List_SCFR[l_modify_SCFL]._UndocommandsSCFR, SuspensionCoordinatesFrontRight.Assy_List_SCFR[l_modify_SCFL]._RedocommandsSCFR,
                                    l_modify_SCFL + 1, SuspensionCoordinatesFrontRight.Assy_List_SCFR[l_modify_SCFL].SCFRIsModified);
                undoRedo.Redo(1);
                SuspensionCoordinatesFrontRight.IsUndoRedoCalledByLeft_IdentifierMethod(false);//This method sets the value of IsUndoRedoCalledByLeft to false so that the Right Suspension coordinate can also be Undone
            }
            #endregion

            Kinematics_Software_New.EditFrontCAD(l_modify_SCFL);

            Kinematics_Software_New.SCFL_ModifyInVehicle(l_modify_SCFL, Assy_List_SCFL[l_modify_SCFL]);


            #endregion
        }
        /// <summary>
        ///
        /// </summary>
        /// <param name="l_modify_scrl"></param>
        /// <param name="modify_scrl_list"></param>
        /// <param name="redo_Identifier"></param>
        public void ModifyObjectData(int l_modify_scrl, object modify_scrl_list, bool redo_Identifier)
        {
            ///<summary>
            ///In this section of the code, the Suspension is bring modified and it is placed under the method called ModifyObjectData because it is an Undoable operation
            ///</summary>

            #region Redoing the modification
            SuspensionCoordinatesRear _scrl_forRedo = (SuspensionCoordinatesRear)modify_scrl_list;

            ICommand cmd = Assy_List_SCRL[l_modify_scrl];
            Assy_List_SCRL[l_modify_scrl]._UndocommandsSCRL.Push(cmd);

            Assy_List_SCRL[l_modify_scrl] = _scrl_forRedo;

            PopulateDataTable(l_modify_scrl);

            Assy_List_SCRL[l_modify_scrl].SCRLIsModified = true;

            SuspensionCoordinatesRearGUI.DisplaySCRLItem(Assy_List_SCRL[l_modify_scrl]);

            #region Calling Redo method for Opposite Suspension if symmetric
            if (Assy_List_SCRL[l_modify_scrl].RearSymmetry == true && IsUndoRedoCalledByRight == false)
            {
                SuspensionCoordinatesRearRight.IsUndoRedoCalledByLeft_IdentifierMethod(true);
                UndoRedo undoRedo = new UndoRedo();
                undoRedo.Identifier(SuspensionCoordinatesRearRight.Assy_List_SCRR[l_modify_scrl]._UndocommandsSCRR, SuspensionCoordinatesRearRight.Assy_List_SCRR[l_modify_scrl]._RedocommandsSCRR,
                                    l_modify_scrl + 1, SuspensionCoordinatesRearRight.Assy_List_SCRR[l_modify_scrl].SCRRIsModified);
                undoRedo.Redo(1);
                SuspensionCoordinatesRearRight.IsUndoRedoCalledByLeft_IdentifierMethod(false);
            }
            #endregion

            Kinematics_Software_New.EditRearCAD(l_modify_scrl);

            Kinematics_Software_New.SCRL_ModifyInVehicle(l_modify_scrl, Assy_List_SCRL[l_modify_scrl]);


            #endregion
        }
        public void ModifyObjectData(int l_modify_scrr, object modify_scrr_list, bool redo_Identifier)
        {
            ///<summary>
            ///In this section of the code, the Suspension is bring modified and it is placed under the method called ModifyObjectData because it is an Undoable operation
            ///</summary>

            #region Redoing the modification
            SuspensionCoordinatesRearRight _scrr_forRedo = (SuspensionCoordinatesRearRight)modify_scrr_list;

            ICommand cmd = Assy_List_SCRR[l_modify_scrr];
            Assy_List_SCRR[l_modify_scrr]._UndocommandsSCRR.Push(cmd);

            Assy_List_SCRR[l_modify_scrr] = _scrr_forRedo;

            PopulateDataTable(l_modify_scrr);

            Assy_List_SCRR[l_modify_scrr].SCRRIsModified = true;

            SuspensionCoordinatesRearRightGUI.DisplaySCRRItem(Assy_List_SCRR[l_modify_scrr]);

            #region Calling Redo method for Opposite Suspension if symmetric
            if (Assy_List_SCRR[l_modify_scrr].RearSymmetry == true && IsUndoRedoCalledByLeft == false)
            {
                SuspensionCoordinatesRear.IsUndoRedoCalledByRight_IdentifierMethod(true);// This method sets the IsUndoRedoCalledByRight variable to true and prevents an infinte loop
                UndoRedo undoRedo = new UndoRedo();
                undoRedo.Identifier(SuspensionCoordinatesRear.Assy_List_SCRL[l_modify_scrr]._UndocommandsSCRL, SuspensionCoordinatesRear.Assy_List_SCRL[l_modify_scrr]._RedocommandsSCRL,
                                    l_modify_scrr + 1, SuspensionCoordinatesRear.Assy_List_SCRL[l_modify_scrr].SCRLIsModified);
                undoRedo.Redo(1);
                SuspensionCoordinatesRear.IsUndoRedoCalledByRight_IdentifierMethod(false);// This method sets the IsUndoRedoCalledByRight variable to false and allows the left suspenson coordinate to be undone
            }
            #endregion

            Kinematics_Software_New.EditRearCAD(l_modify_scrr);

            Kinematics_Software_New.SCRR_ModifyInVehicle(l_modify_scrr, Assy_List_SCRR[l_modify_scrr]);


            #endregion
        }
Exemple #5
0
        public void Undo_ModifyObjectData(int l_unexcute_scfr, ICommand command)
        {
            ///<summary>
            /// This code is to undo the modification action which the user has performed
            /// </summary>
            #region Undoing the modification
            try
            {
                SuspensionCoordinatesFrontRight _scfr_forUndo = (SuspensionCoordinatesFrontRight)command;

                ICommand cmd = Assy_List_SCFR[l_unexcute_scfr];
                Assy_List_SCFR[l_unexcute_scfr]._RedocommandsSCFR.Push(cmd);

                Assy_List_SCFR[l_unexcute_scfr] = _scfr_forUndo;

                PopulateDataTable(l_unexcute_scfr);

                SuspensionCoordinatesFrontRightGUI.DisplaySCFRItem(Assy_List_SCFR[l_unexcute_scfr]);

                #region Calling Undo method for Opposite Suspension if symmetric
                if (SuspensionCoordinatesFrontRight.Assy_List_SCFR[l_unexcute_scfr].FrontSymmetry == true && IsUndoRedoCalledByLeft == false)
                {
                    SuspensionCoordinatesFront.IsUndoRedoCalledByRight_IdentifierMethod(true);// This method sets the IsUndoRedoCalledByRight variable to true and prevents an infinte loop

                    UndoRedo undoRedo = new UndoRedo();
                    undoRedo.Identifier(SuspensionCoordinatesFront.Assy_List_SCFL[l_unexcute_scfr]._UndocommandsSCFL, SuspensionCoordinatesFront.Assy_List_SCFL[l_unexcute_scfr]._RedocommandsSCFL,
                                        l_unexcute_scfr + 1, SuspensionCoordinatesFront.Assy_List_SCFL[l_unexcute_scfr].SCFLIsModified);
                    undoRedo.Undo(1);
                    SuspensionCoordinatesFront.IsUndoRedoCalledByRight_IdentifierMethod(false);// This method sets the IsUndoRedoCalledByRight variable to false and allows the left suspenson coordinate to be undone
                }
                #endregion

                Kinematics_Software_New.EditFrontCAD(l_unexcute_scfr);

                Kinematics_Software_New.SCFR_ModifyInVehicle(l_unexcute_scfr, Assy_List_SCFR[l_unexcute_scfr]);
            }
            catch (Exception) { }
            #endregion
        }