/// <summary>
/// Test Command: ReadChassisLogWithTimestamp. Test case verifies:
/// The command returns completion code success for WcsAdmin;
/// Bad Request for WcsOperator and WcsUser
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
// [TFS WorkItem:2577] ReadChassisLogWithTimestamp: Verify all users from are able to execute the command
public bool ReadChassisLogWithTimestampByAllUsers()
{
CmTestLog.Start();
bool testPassed = true;
// Loop through different user types and ReadChassisLogWithTimestamp
foreach (WCSSecurityRole roleId in Enum.GetValues(typeof(WCSSecurityRole)))
{
ChassisLogResponse chassisLog;
// Use different user context
this.TestChannelContext = this.ListTestChannelContexts[(int)roleId];
CmTestLog.Info(string.Format("Trying to ReadChassisLogWithTimestamp with user type {0} ", roleId.ToString()));
chassisLog = this.TestChannelContext.ReadChassisLogWithTimestamp(DateTime.MinValue, DateTime.Now);
if (chassisLog.completionCode != CompletionCode.Success && (roleId == WCSSecurityRole.WcsCmAdmin || roleId == WCSSecurityRole.WcsCmOperator || roleId == WCSSecurityRole.WcsCmUser))
{
CmTestLog.Failure(string.Format("Cannot Get Read ChassisLogs WithTimestamp With User {0}", roleId.ToString()));
CmTestLog.End(false);
return(false);
}
else
{
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, chassisLog.completionCode, "Received ReadChassisLogWithTimestamp for user " + roleId.ToString());
}
}
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Sets blade state. If state is set to ON, set the blade to on; otherwise, set the blade to off.
/// If bladeId is specified, change blade state to that specific blade; otherwise, the change
/// will be made to all blades.
/// </summary>
protected bool SetBladeState(PowerState state, int bladeId = -1, [CallerMemberName]
string testName = null)
{
try
{
var message = string.Format("Set {0} to {1} state", state,
bladeId > 0 ? string.Format("Blade {0}", bladeId) : "all blades");
CmTestLog.Info(string.Concat("Trying to ", message), testName);
ChassisResponse response;
if (bladeId > 0)
{
response = state == PowerState.ON
? this.Channel.SetBladeOn(bladeId)
: this.Channel.SetBladeOff(bladeId);
}
else
{
response = state == PowerState.ON
? this.Channel.SetAllBladesOn()
: this.Channel.SetAllBladesOff();
}
var result = ChassisManagerTestHelper.AreEqual(CompletionCode.Success,
response.completionCode, message, testName);
Thread.Sleep(TimeSpan.FromSeconds(CmConstants.BladePowerOnSeconds));
return(result);
}
catch (Exception e)
{
CmTestLog.Exception(e, testName);
return(false);
}
}
/// <summary>
/// Test Command: ReadChassisLogWithTimestamp. The test case verifies:
/// The command returns completion code success;
/// Verifies all the entries with in the time stamp
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool ReadChassisLogWithTimestamp()
{
CmTestLog.Start();
bool testPassed = true;
ChassisLogResponse cmLogReponse = null;
ChassisLogResponse CMLogReponseWithTime = null;
CmTestLog.Info("!!!!!!!!! Starting execution of ReadChassisLogWithTimestampTest !!!!!!!!!");
cmLogReponse = this.Channel.ReadChassisLog();
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, cmLogReponse.completionCode, "Received for read chassis log");
// Make sure log entries should not be more than 50
testPassed &= ChassisManagerTestHelper.IsTrue(cmLogReponse.logEntries.Count <= CmConstants.LogEntries, string.Format("Received {0} log entries", cmLogReponse.logEntries.Count));
DateTime invalidStart = DateTime.Now.AddDays(1);
DateTime invalidEnd = DateTime.Now.AddDays(2);
CMLogReponseWithTime = this.Channel.ReadChassisLogWithTimestamp(invalidStart, invalidEnd);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, CMLogReponseWithTime.completionCode, "Received success for ReadChassisLogWithTimestamp");
testPassed &= ChassisManagerTestHelper.IsTrue(CMLogReponseWithTime.logEntries.Count == 0, "Received zero entries for invalid timestamp");
//need to clear the chassis log so the response is not too big
ChassisResponse response = this.Channel.ClearChassisLog();
//Add couple more calls
this.Channel.SetChassisAttentionLEDOn();
this.Channel.SetChassisAttentionLEDOff();
cmLogReponse = this.Channel.ReadChassisLog();
DateTime start = DateTime.Now.AddDays(-1);
DateTime end = DateTime.Now.AddDays(1);
CMLogReponseWithTime = this.Channel.ReadChassisLogWithTimestamp(start, end);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, CMLogReponseWithTime.completionCode, "Received success for ReadChassisLogWithTimestamp");
testPassed &= ChassisManagerTestHelper.IsTrue(cmLogReponse.logEntries[1].eventTime > start, "Log entires start time");
testPassed &= ChassisManagerTestHelper.IsTrue(cmLogReponse.logEntries[cmLogReponse.logEntries.Count - 1].eventTime < end, "Log entires end time");
int logSize = CMLogReponseWithTime.logEntries.Count;
if (!CMLogReponseWithTime.logEntries[logSize - 1].eventDescription.Contains("SetChassisAttentionLEDOn"))
{
CmTestLog.Failure("!!!Failed to read the CM logs with a time range.");
return(false);
}
//This will require that the CM doesn't receive any other user commands.
if (!CMLogReponseWithTime.logEntries[0].eventDescription.Contains("ReadChassisLog"))
{
CmTestLog.Failure("!!!Failed to read the CM logs with a time range.");
return(false);
}
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Test Command: ClearChassisLog
/// Test case verifies: Completion code success
/// Verifies Log entries count after clear chassis log and read chassislog
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool ClearChassisLog()
{
CmTestLog.Start();
bool testPassed = true;
ChassisLogResponse cmLogsResponse;
ChassisResponse cmResponse;
CmTestLog.Info(" !!!!!! Started running of clearchassislogtest !!!!!! ");
cmResponse = this.Channel.ClearChassisLog();
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, cmResponse.completionCode, "Received for clear chassis log");
CmTestLog.Info("Verifying log entries after clear the chassis logs");
cmLogsResponse = this.Channel.ReadChassisLog();
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, cmResponse.completionCode, "Received for read chassis log");
testPassed &= ChassisManagerTestHelper.AreEqual(CmConstants.LogCount, cmLogsResponse.logEntries.Count, "Received for log entries count");
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Test Command: ReadBladeLogWithTimestamp. The test case verifies:
/// The command returns completion code success;
/// The command succeeds even after all logs are cleared.
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool ReadBladeLogWithTimestampTest()
{
CmTestLog.Start();
// get all server blade locations
int[] serverLocations;
if (!GetBladeLocations(blade => blade.bladeType.Equals(CmConstants.ServerBladeType),
out serverLocations) || serverLocations.Length == 0)
{
CmTestLog.Failure("Cannot find any server blade");
CmTestLog.End(false);
return(false);
}
// pick up a random server blade
var bladeId = serverLocations.RandomOrDefault();
CmTestLog.Info(string.Format("Pick up a random server blade# {0} for test", bladeId));
bool testPassed = true;
ChassisResponse response;
// read logs from the blade
CmTestLog.Info("Trying to read blade log with timestamp from Blade# " + bladeId);
response = this.Channel.ReadBladeLogWithTimestamp(bladeId, DateTime.MinValue, DateTime.Now);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, response.completionCode, "Logs read from Blade# " + bladeId);
// clear the logs and read again
CmTestLog.Info("Trying to clear the logs on Blade# " + bladeId);
response = this.Channel.ClearBladeLog(bladeId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, response.completionCode, "Logs cleared on Blade# " + bladeId);
CmTestLog.Info("Trying to read logs again from Blade# " + bladeId);
response = this.Channel.ReadBladeLogWithTimestamp(bladeId, DateTime.MinValue, DateTime.Now);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, response.completionCode, "Logs read from Blade# " + bladeId);
// end of the test
CmTestLog.End(testPassed);
return(testPassed);
}
protected bool GetAllBladesInfo(out GetAllBladesInfoResponse allBladesInfoResponse,
[CallerMemberName]
string testName = null)
{
// if the blade info has already been cached
// just return it.
if (this.allBladesInfo != null)
{
allBladesInfoResponse = this.allBladesInfo;
return(true);
}
try
{
CmTestLog.Info("Trying to get the information for all blades", testName);
if (!this.SetPowerState(PowerState.ON) || !this.SetBladeState(PowerState.ON))
{
allBladesInfoResponse = null;
return(false);
}
allBladesInfoResponse = this.Channel.GetAllBladesInfo();
if (CompletionCode.Success != allBladesInfoResponse.completionCode)
{
CmTestLog.Failure("Failed to get all blades info", testName);
return(false);
}
CmTestLog.Success("Get all blades info successfully", testName);
this.allBladesInfo = allBladesInfoResponse; // save it
return(true);
}
catch (Exception e)
{
CmTestLog.Exception(e, testName);
allBladesInfoResponse = null;
return(false);
}
}
/// <summary>
/// Test Command: ClearChassisLog. Test case verifies:
/// The command returns completion code success for WcsAdmin;
/// Bad Request for WcsOperator and WcsUser
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
// [TFS WorkItem:2585] ClearChassisLog: Verify ONLY users from WcsCmAdmin are able to execute the command
public bool ClearChassisLogByAllUsers()
{
CmTestLog.Start();
bool testPassed = true;
// Loop through different user types and ReadChassisLogWithTimestamp
foreach (WCSSecurityRole roleId in Enum.GetValues(typeof(WCSSecurityRole)))
{
try
{
// Use different user context
this.TestChannelContext = this.ListTestChannelContexts[(int)roleId];
CmTestLog.Info(string.Format("Trying to ClearChassisLog with user type {0} ", roleId.ToString()));
ChassisResponse clearChassisLog = this.TestChannelContext.ClearChassisLog();
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, clearChassisLog.completionCode, "Received ClearChassisLog for user " + roleId.ToString());
}
catch (Exception ex)
{
// Check error is due to permission HTTP 400 bad request
if (ex.Message.Contains("400") && roleId == WCSSecurityRole.WcsCmUser)
{
ChassisManagerTestHelper.IsTrue(true, "ClearChassisLog returned Bad Request for user " + roleId.ToString());
}
else
{
ChassisManagerTestHelper.IsTrue(false, "Exception: " + ex.Message);
testPassed = false;
}
}
}
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Test Command: ReadChassisLog
/// The test case verifies: All users can execute command
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool ReadChassisLogTest()
{
CmTestLog.Start();
bool allPassed = true;
string currentApi = "ReadChassisLog";
try
{
// Verify all users can execute command : WorkItem(2580)
bool userPassed;
foreach (WCSSecurityRole TestUser in Enum.GetValues(typeof(WCSSecurityRole)))
{
CmTestLog.Info("Calling " + currentApi + " for user type " + TestUser);
userPassed = true;
VerifyReadChassisLog(ref userPassed, TestUser);
ChassisManagerTestHelper.IsTrue(userPassed,
currentApi + ": Command executed for user " + TestUser);
allPassed &= userPassed;
}
ChassisManagerTestHelper.IsTrue(allPassed,
currentApi + ": All users can execute the command");
}
catch (Exception ex)
{
ChassisManagerTestHelper.IsTrue(false, ex.Message);
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Chassis Manager service started");
allPassed = false;
}
CmTestLog.End(allPassed);
return(allPassed);
}
/// <summary>
/// Basic validation test to set NextBoot test
/// </summary>
protected Boolean SetNextBootTest()
{
CmTestLog.Start();
bool testPassed = true;
bool isServer = false;
int bladeIndex = 1;
string failureMessage;
EmptyLocations = GetEmptyLocations();
JbodLocations = GetJbodLocations();
CmTestLog.Info("!!!!!!!!! Starting execution of SetNextBootTest.");
//Make sure blade is reacheable
//Loop through servers listing and find first Blad to test
while (!isServer && bladeIndex <= CmConstants.Population)
{
if (!JbodLocations.Contains(bladeIndex) && !EmptyLocations.Contains(bladeIndex))
{
isServer = true;
}
else
{
bladeIndex++;
}
}
if (bladeIndex > CmConstants.Population)
{
failureMessage = "!!!Failed to find a server blade to run the test.";
CmTestLog.Failure(failureMessage);
return(false);
}
Channel.SetPowerOn(bladeIndex);
Thread.Sleep(50000);
BootResponse bBootType;
int index = 1;
foreach (BladeBootType testedBootType in Enum.GetValues(typeof(BladeBootType)))
{
//Doing the same setting twice to make sure we are handling this properly.
if (testedBootType.ToString() != BladeBootType.Unknown.ToString())
{
//set to persistent.
bBootType = Channel.SetNextBoot(bladeIndex, testedBootType, false, false, 0);
if (bBootType.completionCode != CompletionCode.Success)
{
failureMessage = string.Format("!!!Failed to set non persistant boot type to: {0}",
testedBootType);
CmTestLog.Failure(failureMessage);
testPassed = false;
}
bBootType = Channel.GetNextBoot(bladeIndex);
if (testedBootType.ToString() != bBootType.nextBoot.ToString())
{
failureMessage = "!!!The Non persistent boot type did not match what it was set to.";
CmTestLog.Failure(failureMessage);
testPassed = false;
}
//set to non persistent.
bBootType = Channel.SetNextBoot(bladeIndex, testedBootType, false, true, 1);
if (bBootType.completionCode != CompletionCode.Success)
{
failureMessage = string.Format("!!!Failed to set Persistent boot type to: {0}", testedBootType);
CmTestLog.Failure(failureMessage);
testPassed = false;
}
//Make sure if no restart happens it keeps its value.
bBootType = Channel.GetNextBoot(bladeIndex);
if (testedBootType.ToString() != bBootType.nextBoot.ToString())
{
failureMessage = "!!!The boot type did not match what it was set to.";
CmTestLog.Failure(failureMessage);
testPassed = false;
}
//Make sure it loses its value after restart
Channel.SetBladeActivePowerCycle(bladeIndex, 0);
Thread.Sleep(60000);
bBootType = Channel.GetNextBoot(bladeIndex);
if (testedBootType.ToString() != BladeBootType.ForcePxe.ToString() &&
testedBootType.ToString() != bBootType.nextBoot.ToString())
{
failureMessage =
string.Format(
"!!!The boot type did not match what it was set to before power cycle. {0} vs {1} this is round# {2}",
testedBootType, bBootType.nextBoot, index);
CmTestLog.Failure(failureMessage);
testPassed = false;
}
}
}
Channel.SetNextBoot(bladeIndex, BladeBootType.NoOverride, false, true, 0);
CmTestLog.Info("!!!!!!!!! Successfully finished execution of SetNextBoot tests.");
// end of the test
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Test Command: SetNextBoot, GetNextBoot. The test case verifies:
/// The command returns a success completion code on server blades;
/// The command works with all blade types (except unknown type);
/// When set to non-persistent, the blade will lose its next boot value after restart.
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool SetGetNextBootTest()
{
CmTestLog.Start();
// get all server blade locations
int[] serverLocations;
if (!GetBladeLocations(blade => blade.bladeType.Equals(CmConstants.ServerBladeType),
out serverLocations) || serverLocations.Length == 0)
{
CmTestLog.Failure("Cannot find any server blade");
CmTestLog.End(false);
return(false);
}
// pick up a random server blade
int bladeId = serverLocations.RandomOrDefault();
CmTestLog.Info(string.Format("Pick up a random server blade# {0} for test", bladeId));
// make sure the blade is powered on
if (!SetPowerState(PowerState.ON, bladeId))
{
CmTestLog.Failure("Cannot power on Blade# " + bladeId);
CmTestLog.End(false);
return(false);
}
bool allPassed = true;
foreach (BladeBootType bootType in Enum.GetValues(typeof(BladeBootType)))
{
if (bootType == BladeBootType.Unknown)
{
continue;
}
//// set next boot to persistent
CmTestLog.Info(string.Format("Trying to set next boot to Type {0} with persistent", bootType));
BootResponse response = Channel.SetNextBoot(bladeId, bootType, false, true, 0);
allPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, response.completionCode,
"Set persistent boot type");
// get next boot and verify
CmTestLog.Info("Trying to get the next boot");
response = Channel.GetNextBoot(bladeId);
allPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success,
response.completionCode, "Get next boot value");
allPassed &= ChassisManagerTestHelper.AreEqual(bootType, response.nextBoot,
"The boot type matches what it was set to");
//// set to non persistent
CmTestLog.Info(string.Format("Trying to set next boot to Type {0} with non-persistent", bootType));
response = Channel.SetNextBoot(bladeId, bootType, false, false, 1);
allPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, response.completionCode,
"Set non-persistent boot type");
// get next boot and verify
CmTestLog.Info("Trying to get the next boot");
response = Channel.GetNextBoot(bladeId);
allPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success,
response.completionCode, "Get next boot value");
allPassed &= ChassisManagerTestHelper.AreEqual(bootType, response.nextBoot,
"The boot type matches what it was set to");
// make sure it loses its value after restart
if (!(bootType == BladeBootType.ForcePxe || bootType == BladeBootType.NoOverride))
{
CmTestLog.Info("Trying to restart the blade and get next boot value again");
Channel.SetBladeActivePowerCycle(bladeId, 0);
Thread.Sleep(TimeSpan.FromMinutes(1));
response = Channel.GetNextBoot(bladeId);
allPassed &= ChassisManagerTestHelper.IsTrue(bootType == response.nextBoot,
"The blade loses its next boot value after power cycle");
}
}
// end of the test
CmTestLog.End(allPassed);
return(allPassed);
}
/// <summary>
/// Basic validation test to set NextBoot test
/// </summary>
protected Boolean SetNextBootToJbodTest()
{
CmTestLog.Start();
bool testPassed = true;
bool isJBodServer = false;
int bladeIndex = 1;
string failureMessage;
EmptyLocations = GetEmptyLocations();
JbodLocations = GetJbodLocations();
CmTestLog.Info("!!!!!!!!! Starting execution of SetNextBootTest.");
//Find first Jbod Server
while (!isJBodServer && bladeIndex <= CmConstants.Population)
{
if (JbodLocations.Contains(bladeIndex))
{
isJBodServer = true;
}
else
{
bladeIndex++;
}
}
if (bladeIndex > CmConstants.Population)
{
failureMessage = "!!!Failed to find a server blade to run the test.";
CmTestLog.Failure(failureMessage);
return(false);
}
Channel.SetPowerOn(bladeIndex);
Thread.Sleep(50000);
BootResponse bBootType;
foreach (BladeBootType testedBootType in Enum.GetValues(typeof(BladeBootType)))
{
//Doing the same setting twice to make sure we are handling this properly.
if (testedBootType.ToString() != BladeBootType.Unknown.ToString())
{
//set to persistent.
bBootType = Channel.SetNextBoot(bladeIndex, testedBootType, false, false, 0);
if (bBootType.completionCode == CompletionCode.Success &&
bBootType.completionCode != CompletionCode.CommandNotValidForBlade)
{
failureMessage = string.Format("Test failed, successfully set nextboot to JBOD type to: {0}",
testedBootType);
CmTestLog.Failure(failureMessage);
testPassed = false;
}
bBootType = Channel.GetNextBoot(bladeIndex);
if (bBootType.completionCode == CompletionCode.Success &&
bBootType.completionCode != CompletionCode.CommandNotValidForBlade)
{
failureMessage = string.Format("Test failed, successfully GET nextboot to JBOD type to: {0}",
testedBootType);
CmTestLog.Failure(failureMessage);
testPassed = false;
}
}
}
// end of the test
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Basic validation test to set NextBoot test
/// </summary>
protected Boolean SetNextBootByAllUserTest()
{
CmTestLog.Start();
bool testPassed = true;
bool isServer = false;
int bladeIndex = 1;
string failureMessage = string.Empty;
EmptyLocations = GetEmptyLocations();
JbodLocations = GetJbodLocations();
CmTestLog.Info("!!!!!!!!! Starting execution of SetNextBootTest.");
//Make sure blade is reacheable
//Loop through servers listing and find first Blad to test
while (!isServer && bladeIndex <= CmConstants.Population)
{
if (!JbodLocations.Contains(bladeIndex) && !EmptyLocations.Contains(bladeIndex))
{
isServer = true;
}
else
{
bladeIndex++;
}
}
if (bladeIndex > CmConstants.Population)
{
failureMessage = "!!!Failed to find a server blade to run the test.";
CmTestLog.Failure(failureMessage);
return(false);
}
Channel.SetPowerOn(bladeIndex);
Thread.Sleep(50000);
int index = 1;
foreach (WCSSecurityRole roleId in Enum.GetValues(typeof(WCSSecurityRole)))
{
try
{
if (!GetSetNextBoots(testPassed, bladeIndex, failureMessage, index, roleId))
{
failureMessage = string.Format("Failed to set Persistent boot type by user type: {0}", roleId);
CmTestLog.Failure(failureMessage);
testPassed = false;
break;
}
}
catch (Exception e)
{
// Check if we got 401 error
// Check error is due to permission HTTP 401 unauthorize
if (!e.Message.Contains("401"))
{
// Test failed, http response should contain http 401 error
CmTestLog.Failure("We are expecting 401 error, but we received 400 instead.");
}
}
}
CmTestLog.Info("!!!!!!!!! Successfully finished execution of SetNextBoot tests.");
// end of the test
CmTestLog.End(testPassed);
return(testPassed);
}
/// <summary>
/// Starts or stops the CM service
/// </summary>
/// <example>
/// Example 1: start the CM service
/// StartStopCmService("start");
/// Example 2: stop the CM service
/// StartStopCmService("stop");
/// </example>
/// <param name="startStopService"></param>
/// <param name="testName"></param>
/// <param name="retryStartStop"></param>
/// <returns></returns>
protected bool StartStopCmService(string startStopService, [CallerMemberName] string testName = null,
bool retryStartStop = true)
{
bool startStopSuccess = true;
try
{
string cmServiceName = "chassismanager";
startStopService = startStopService.ToLower();
if (startStopService == "start")
{
CmTestLog.Info(string.Format("Trying to start Chassis Manager service on {0}", this.defaultCMName));
}
else if (startStopService == "stop")
{
CmTestLog.Info(string.Format("Trying to stop Chassis Manager service on {0}", this.defaultCMName));
}
else
{
CmTestLog.Failure("startStopService action not defined to 'start' or 'stop' service");
return(false);
}
// Initialize object to specify all settings for WMI connection
ConnectionOptions serviceConnectOptions = new ConnectionOptions();
serviceConnectOptions.Username = string.Format("{0}\\{1}", this.defaultCMName, this.defaultAdminUserName);
serviceConnectOptions.Password = this.defaultAdminPassword;
// Initialize object to represent scope of management operations
ManagementScope serviceScope = new ManagementScope(string.Format("{0}{1}{2}", @"\\", this.defaultCMName, @"\root\cimv2"));
serviceScope.Options = serviceConnectOptions;
// Define WMI query to execute on CM
SelectQuery query = new SelectQuery(string.Format("select * from Win32_service where name = '{0}'", cmServiceName));
using (ManagementObjectSearcher serviceSearcher = new ManagementObjectSearcher(serviceScope, query))
{
ManagementObjectCollection serviceCollection = serviceSearcher.Get();
foreach (ManagementObject service in serviceCollection)
{
if (startStopService == "start")
{
if (service["Started"].Equals(true))
{
CmTestLog.Success("Chassis Manager service already started");
startStopSuccess &= true;
continue;
}
else if (service.GetPropertyValue("State").ToString() == "Stopped")
{
// Start the service
CmTestLog.Info(string.Format("Trying to start Chassis Manager service ..."));
service.InvokeMethod("StartService", null);
CmTestLog.Info(string.Format("Chassis Manager service is starting. Sleeping for {0} seconds",
CmConstants.CmServiceStartStopSeconds));
Thread.Sleep(TimeSpan.FromSeconds(CmConstants.CmServiceStartStopSeconds));
startStopSuccess &= true;
continue;
}
else
{
CmTestLog.Info("Chassis Manager service not in start or stop state");
startStopSuccess &= false;
}
}
else if (startStopService == "stop")
{
if (service["Started"].Equals(true))
{
// Stop the service
CmTestLog.Info(string.Format("Trying to stop Chassis Manager service ..."));
service.InvokeMethod("StopService", null);
CmTestLog.Info(string.Format("Stopping Chassis Manager service. Sleeping for {0} seconds",
CmConstants.CmServiceStartStopSeconds));
Thread.Sleep(TimeSpan.FromSeconds(CmConstants.CmServiceStartStopSeconds));
startStopSuccess &= true;
continue;
}
else if (service.GetPropertyValue("State").ToString() == "Stopped")
{
CmTestLog.Success("Chassis Manager service already stopped");
startStopSuccess &= true;
continue;
}
else
{
CmTestLog.Info("Chassis Manager service not in start or stop state");
startStopSuccess &= false;
}
}
else
{
CmTestLog.Failure("startStopService action not defined to 'start' or 'stop' service");
return(false);
}
}
}
}
catch (COMException ce)
{
//if we fail for RPC server not being available we need to try one more time
if (ce.Message.Contains("0x800706BA") && retryStartStop == true)
{
CmTestLog.Info("startStopCmService failed with COMException 0x800706BA. Retrying...");
startStopSuccess = StartStopCmService(startStopService, null, false);
}
else
{
throw new Exception("Unexpected COMException occurred or retry failed", ce);
}
}
catch (Exception e)
{
CmTestLog.Failure("Start or Stop chassis manager service has failed with an exception.");
CmTestLog.Exception(e, testName);
return(false);
}
return(startStopSuccess);
}
/// <summary>
/// Configures App.Config of Chassis Manager service by taking as input key value pairs from dictionary.
/// keys in dictionary are the keys in App.Config and values are the value in App.Config that
/// are to be changed for each key. ConfigureAppConfig backs up the original App.Config and should be
/// restored using cleanUp parameter after testing with ConfigureAppConfig is complete.
/// </summary>
/// <example>
/// Example 1: Change Value of Key "NumFans" in CM service App.Config to "5"
/// ConfigureAppConfig(new Dictionary<string, string>() {{"NumFans", "5"}}, false);
/// Example 2: Restore original CM service App. Config
/// ConfigureAppConfig(null, true);
/// </example>
/// <remarks>
/// ConfigureAppConfig does not restart the CM service after configuring App.Config. Use method RestartCmService.
/// </remarks>
/// <param name="appConfigKeyValuePairs"></param>
/// <param name="cleanUp"></param>
/// <param name="testName"></param>
/// <returns></returns>
protected bool ConfigureAppConfig(Dictionary <string, string> appConfigKeyValuePairs, bool cleanUp,
[CallerMemberName]
string testName = null)
{
bool configurationSuccess = true;
try
{
string configFilePath = string.Format("{0}{1}{2}", @"\\", this.defaultCMName, @"\c$\ChassisManager\Microsoft.GFS.WCS.ChassisManager.exe.config");
string backupConfigFilePath = string.Format("{0}{1}{2}", @"\\", this.defaultCMName, @"\c$\ChassisManager\Microsoft.GFS.WCS.ChassisManager.exe.config.backup");
string modifiedConfigFilePath = string.Format("{0}modifiedConfig.config", Path.Combine(Directory.GetCurrentDirectory(), "TestData"));
IntPtr token = IntPtr.Zero;
// Impersonate remote user in order to copy/modify files
bool successLogon = LogonUser(this.defaultAdminUserName, this.defaultCMName, this.defaultAdminPassword,
(int)DwLogonType.NewCredentials, (int)DwLogonProvider.WinNT50, ref token);
if (successLogon)
{
CmTestLog.Info("LogonUser: User successfully created");
// Impersonate user
using (WindowsImpersonationContext context = WindowsIdentity.Impersonate(token))
{
if (!cleanUp)
{
// Verify input KeyValue pairs is not empty
if (appConfigKeyValuePairs.Count < 1)
{
CmTestLog.Failure("Requested App Config Key Value Pairs is empty");
return(false);
}
// Delete modified file path if it already exists
if (File.Exists(modifiedConfigFilePath))
{
File.Delete(modifiedConfigFilePath);
CmTestLog.Info("Temporary App.Config already exists. Deleting...");
}
// Delete backup file path if it already exists
if (File.Exists(backupConfigFilePath))
{
File.Delete(backupConfigFilePath);
CmTestLog.Info("Backup App.Config already exists. Deleting...");
}
// Copy original App.Config to temporary path and backup original
File.Copy(configFilePath, modifiedConfigFilePath);
File.Move(configFilePath, backupConfigFilePath);
// Initialize App.Config in config object to prep for modification
ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap();
fileMap.ExeConfigFilename = modifiedConfigFilePath;
Configuration config = ConfigurationManager.OpenMappedExeConfiguration(fileMap, ConfigurationUserLevel.None);
// Modify KeyValue pairs in App.Config to requested input KeyValue pairs
foreach (KeyValuePair <string, string> xmlKeyValue in appConfigKeyValuePairs)
{
if (config.AppSettings.Settings.AllKeys.Contains(xmlKeyValue.Key))
{
config.AppSettings.Settings[xmlKeyValue.Key].Value = xmlKeyValue.Value;
CmTestLog.Success(string.Format(string.Format("Changed key:{0} to new value:{1} in App.Config",
xmlKeyValue.Key, xmlKeyValue.Value)));
configurationSuccess &= true;
}
else
{
CmTestLog.Failure(string.Format("Could not find key:{0} in App.Config", xmlKeyValue.Key));
configurationSuccess = false;
}
}
// Save modified App.Config
config.Save();
System.Configuration.ConfigurationManager.RefreshSection("appSettings");
// Copy over modified App.Config to original file path
if (!File.Exists(configFilePath))
{
File.Copy(modifiedConfigFilePath, configFilePath);
}
else
{
CmTestLog.Failure("App.Config cannot be renamed, and so, cannot be replaced by modified App.Config");
return(false);
}
File.Delete(modifiedConfigFilePath);
}
else
{
// Revert back to original App.Config using backup file during CleanUp
CmTestLog.Info("configureAppConfig CleanUp: Replacing modified App.Config with original App.Config");
if (!File.Exists(backupConfigFilePath))
{
CmTestLog.Failure("Backup App.Config does not exist");
return(false);
}
else
{
if (File.Exists(configFilePath))
{
CmTestLog.Info("Modified App.Config file exists - deleting");
File.Delete(configFilePath);
}
File.Move(backupConfigFilePath, configFilePath);
}
CmTestLog.Success("configureAppConfig: Clean up successful");
}
// Revert back to original user
context.Undo();
}
}
else
{
CmTestLog.Failure("UserLogon: User failed to be created");
return(false);
}
}
catch (Exception e)
{
CmTestLog.Exception(e, testName);
return(false);
}
return(configurationSuccess);
}
/// <summary>
/// Test Command: ReadBladeLog, ClearBladeLog. The test case verifies:
/// The command returns completion code success on server blades;
/// ReadBladeLog succeeds even after all logs are cleared.
/// </summary>
/// <returns>True if all check-points pass; false, otherwise.</returns>
public bool ReadClearBladeLogTest()
{
CmTestLog.Start();
ChassisLogResponse readLogResponse;
BladeResponse clearLogResponse;
bool testPassed = true;
int[] serverLocations, jbodLocations;
if (!this.GetBladeLocations(blade => blade.bladeType.Equals(CmConstants.ServerBladeType), out serverLocations) ||
!this.GetBladeLocations(blade => blade.bladeType.Equals(CmConstants.JbodBladeType), out jbodLocations))
{
CmTestLog.Failure("Cannot find a server/ Jbod blade to execute automation against");
CmTestLog.End(false);
return(false);
}
if (serverLocations == null || serverLocations.Length == 0)
{
CmTestLog.Warning("There are no server blades to execute the test against.");
}
else
{
int bladeId = serverLocations.RandomOrDefault();
CmTestLog.Success("Found server blade at location: " + bladeId);
CmTestLog.Info("Power on Blade# " + bladeId);
var powerOnResponse = this.Channel.SetPowerOn(bladeId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, powerOnResponse.completionCode, string.Format("Blade# {0} is powered on", bladeId));
CmTestLog.Info("Read logs from Blade# " + bladeId);
readLogResponse = this.Channel.ReadBladeLog(bladeId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, readLogResponse.completionCode, "Received Read logs from Blade# " + bladeId);
CmTestLog.Info("Clear logs on Blade# " + bladeId + " and read again");
clearLogResponse = this.Channel.ClearBladeLog(bladeId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, clearLogResponse.completionCode, "Logs on Blade# " + bladeId + " is cleared");
readLogResponse = this.Channel.ReadBladeLog(bladeId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, readLogResponse.completionCode, "Read logs from Blade# " + bladeId);
}
// [TFS WorkItem: 2730] ReadBladeLog: Verify command is not valid to run on JBOD blade
if (jbodLocations == null || jbodLocations.Length == 0)
{
CmTestLog.Warning("There are no JBODs to execute the test against.");
}
else
{
int JbodId = jbodLocations.RandomOrDefault();
CmTestLog.Success("Found JBOD blade at location " + JbodId);
CmTestLog.Info("Power on Blade# " + JbodId);
var powerOnResponse = this.Channel.SetPowerOn(JbodId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, powerOnResponse.completionCode, string.Format("JBOD at location# {0} is powered on", JbodId));
CmTestLog.Info("Trying to read logs for JBOD");
readLogResponse = this.Channel.ReadBladeLog(JbodId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.CommandNotValidForBlade, readLogResponse.completionCode, "Received CommandNotValidForBlade to Read logs for JBOD# " + JbodId);
// [TFS WorkItem: 2731] ClearBladeLog: Verify command is not valid to run on JBOD blade
CmTestLog.Info("Trying to clear logs for JBOD");
clearLogResponse = this.Channel.ClearBladeLog(JbodId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.CommandNotValidForBlade, clearLogResponse.completionCode, "Received CommandNotValidForBlade to clear logs for JBOD# " + JbodId);
}
this.EmptyLocations = this.GetEmptyLocations();
if (EmptyLocations == null || EmptyLocations.Length == 0)
{
CmTestLog.Warning("There are no Empty slots to execute the test against.");
}
else
{
int slotId = EmptyLocations.RandomOrDefault();
CmTestLog.Success("Found empty slot at location " + slotId);
CmTestLog.Info("Trying to read logs for Empty location");
readLogResponse = this.Channel.ReadBladeLog(slotId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Timeout, readLogResponse.completionCode, "Received Timeout to Read logs for emoty slot# " + slotId);
// [TFS WorkItem: 2731] ClearBladeLog: Verify command is not valid to run on JBOD blade
CmTestLog.Info("Trying to clear logs for empty slot");
clearLogResponse = this.Channel.ClearBladeLog(slotId);
testPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Timeout, clearLogResponse.completionCode, "Received Timeout to clear logs for empty slot# " + slotId);
}
CmTestLog.End(testPassed);
return(true);
}
private void VerifyReadChassisLog(ref bool chassisPassed, WCSSecurityRole user)
{
string currentApi = "ReadChassisLog";
string logParentDirectory = @"\\" + defaultCMName + @"\c$\";
string[] userLogPaths = new string[] { null, null };
ChassisLogResponse chassisLog = new ChassisLogResponse();
CmTestLog.Info("TestChannelContext user " + (int)user);
this.TestChannelContext = this.ListTestChannelContexts[(int)user];
chassisLog = this.TestChannelContext.ReadChassisLog();
chassisPassed &= ChassisManagerTestHelper.AreEqual(CompletionCode.Success, chassisLog.completionCode,
currentApi + ": Completion Code success for user " + user.ToString());
if (StartStopCmService("stop"))
{
CmTestLog.Success(currentApi + ": Stopped Chassis Manager Service");
}
else
{
CmTestLog.Failure(currentApi +
": Unable to stop Chassis Manager Service. Will not check log entry contents");
chassisPassed = false;
return;
}
// Check Log entries are populated in ChassisLogResponse and not greater than 50 entries
if (chassisLog.logEntries.Count < 1)
{
CmTestLog.Failure(currentApi + ": Command does not return Log Entries");
chassisPassed = false;
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Stopped Chassis Manager Service");
return;
}
else if (chassisLog.logEntries.Count > 50)
{
CmTestLog.Failure(currentApi + ": Command returns more than 50 Log Entries");
chassisPassed = false;
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Stopped Chassis Manager Service");
return;
}
else
{
CmTestLog.Success(currentApi + ": Command returns between 1 and 50 Log Entries");
}
IntPtr token = IntPtr.Zero;
// Impersonate remote user
bool successLogon = LogonUser(defaultAdminUserName, defaultCMName, defaultAdminPassword,
(int)DwLogonType.NewCredentials, (int)DwLogonProvider.WinNT50, ref token);
if (successLogon)
{
using (WindowsImpersonationContext context = WindowsIdentity.Impersonate(token))
{
// Verify that User Logs exist to compare log entries with ChassisLogResponse
if (!Directory.Exists(logParentDirectory))
{
CmTestLog.Failure(currentApi + ": Directory to User Log files does not exist");
chassisPassed = false;
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Stopped Chassis Manager Service");
return;
}
foreach (string filePath in Directory.GetFiles(logParentDirectory))
{
Match fileMatch00 = Regex.Match(filePath, @"ChassisManagerUserLog00\.svclog");
Match fileMatch01 = Regex.Match(filePath, @"ChassisManagerUserLog01\.svclog");
if (fileMatch00.Success)
{
userLogPaths[0] = filePath;
}
else if (fileMatch01.Success)
{
userLogPaths[1] = filePath;
}
}
if (userLogPaths[0] == null && userLogPaths[1] == null)
{
CmTestLog.Failure(currentApi + ": Could not find user logs");
chassisPassed = false;
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Started Chassis Manager Service");
return;
}
// Compare and match log entries in ChassisLogResponse to User Logs in Chassis Manager
int entryCount = 0;
bool allEntriesPassed = true;
foreach (LogEntry entry in chassisLog.logEntries)
{
if (entry.eventDescription == null && entry.eventTime == null)
{
CmTestLog.Failure(currentApi +
string.Format(": Log Entry {0} returns no data for either eventDescription or eventTime or both", entryCount));
allEntriesPassed = false;
entryCount++;
continue;
}
// Find log entry in either UserLog00 or UserLog01
int userLogCount = 0;
bool userLogEntryFound = false;
string propertyValue;
foreach (string userLogPath in userLogPaths)
{
if (userLogPath == null)
{
CmTestLog.Info(currentApi + string.Format(": User Log {0} does not exist", userLogCount));
userLogCount++;
continue;
}
XmlReaderSettings xmlSettings = new XmlReaderSettings();
xmlSettings.ConformanceLevel = ConformanceLevel.Fragment;
XmlReader userLogReader = XmlReader.Create(userLogPath, xmlSettings);
try
{
while (!userLogEntryFound)
{
while (userLogReader.Read())
{
if (userLogReader.Name == "ApplicationData")
{
break;
}
}
if (userLogReader.Name != "ApplicationData")
{
userLogReader.Close();
break;
}
// Read User Log Entry and condition both strings for comparison
propertyValue = userLogReader.ReadElementContentAsString();
propertyValue = propertyValue.Replace(@"\", "");
propertyValue = propertyValue.Replace(@"(", "");
propertyValue = propertyValue.Replace(@")", "");
entry.eventDescription = entry.eventDescription.Replace(@"\", "");
entry.eventDescription = entry.eventDescription.Replace(@"(", "");
entry.eventDescription = entry.eventDescription.Replace(@")", "");
Match eventTimeMatch = Regex.Match(propertyValue,
entry.eventTime.ToString("yyyy-MM-dd HH:mm:ss.fff"));
Match eventDescriptionMatch = Regex.Match(propertyValue, entry.eventDescription);
if (eventTimeMatch.Success && eventDescriptionMatch.Success)
{
CmTestLog.Success(currentApi +
string.Format(": Found eventTime match and eventDescription match for entry {0} in user log {1}", entryCount, userLogCount));
userLogEntryFound = true;
}
}
}
catch (Exception exc)
{
if (exc.Message.Contains(@"Not enough )'s"))
{
CmTestLog.Info(currentApi + string.Format(": Entry {0} throwing exception 'Not enough )'s' in User Log {1}", entryCount, userLogCount));
userLogCount++;
continue;
}
else
{
throw new Exception(exc.Message);
}
}
if (!userLogEntryFound)
{
CmTestLog.Info(currentApi + string.Format(": User Log {0} does not contain entry {1}", userLogCount, entryCount));
userLogReader.Close();
userLogCount++;
continue;
}
userLogReader.Close();
userLogCount++;
}
if (!userLogEntryFound)
{
CmTestLog.Failure(currentApi + string.Format(": Entry {0} was not found in either user logs", entryCount));
allEntriesPassed = false;
entryCount++;
continue;
}
chassisPassed &= allEntriesPassed;
entryCount++;
}
ChassisManagerTestHelper.IsTrue(allEntriesPassed,
currentApi + string.Format(": All Log Entries passed", entryCount));
// Revert back to original user
context.Undo();
}
}
else
{
CmTestLog.Failure("UserLogon: User failed to be created");
chassisPassed = false;
}
ChassisManagerTestHelper.IsTrue(StartStopCmService("start"),
currentApi + ": Started Chassis Manager Service");
}