private void AddTargetWaitWip(WipProfile profile,
List <JobState> jobList,
FabStep step,
string prodVer,
int exCludeStepCnt,
AoEquipment inputEqp,
decimal allowRunDonwTime
)
{
FabAoEquipment eqp = inputEqp.ToFabAoEquipment();
decimal tact = GetAverageTactTime(step, prodVer);
if (exCludeStepCnt > 0) //자신의 Wait 제외시
{
WipStep ws = new WipStep(step, tact, 0);
profile.AddWipStep(ws);
}
else
{
decimal stepWaitQty = GetCurrenStepWaitWipQty(eqp, step, prodVer, allowRunDonwTime);
WipStep ws = new WipStep(step, tact, stepWaitQty);
profile.AddWipStep(ws);
}
}
public static decimal GetAllowRunDownWip(AoEquipment aeqp, string productID, string productVersion, string ownerType, FabStep step, decimal remainRundown)
{
var job = InFlowMaster.GetJobState(productID, ownerType);
if (job == null)
{
return(0m);
}
//Wip Profile
WipProfile iflow = job.CreateWipProfile(step, productVersion, 0, aeqp.Target.Preset as FabWeightPreset, aeqp, remainRundown, false);
iflow.CalcProfile();
var qty = job.GetInflowWip(iflow, remainRundown);
////자신 + 직전
////자신의 대기재공중 Load가능한 수량
//qty += job.GetCurrenStepWaitWipQty(aeqp, step, productVersion, remainRundown);
////자신의 직전의 Run중 Load가능한 수량
//DateTime targetTime = aeqp.NowDT.AddHours((double)-remainRundown);
//qty += job.GetPrevStepRunWipQty(aeqp, step, productVersion, targetTime);
return(qty);
}
public decimal GetInflowWip(WipProfile profile, decimal flowHours)
{
if (profile == null || profile.LastContPt == null)
{
return(0);
}
decimal inFlowQty = (int)profile.ArriveWithin(flowHours);
return(inFlowQty);
}
public bool ConsumeWithin(WipProfile otherFlow, decimal hr, int additionalEqps)
{
// -- hr 시간동안 유입량과 유출량
decimal inQty = LastContPt != null ? LastContPt.Y : 0;
decimal inQty2 = otherFlow.LastContPt != null ? otherFlow.LastContPt.Y : 0;
decimal loadedEqpCount = otherFlow.LoadedEqpCount + LoadedEqpCount + additionalEqps;
decimal outQty = OutRate * loadedEqpCount * hr;
return(inQty + inQty2 <= outQty);
}
public void CalcWipProfile(FabStep step, FabWeightPreset wp, AoEquipment inputEqp)
{
StepRouteInfo info = GetStepRouteInfo(step);
if (info == null)
{
return;
}
foreach (var prodVer in info.VersionList)
{
string key = GetWipProfileKey(step, prodVer);
WipProfile wipProfile = CreateWipProfile(step, prodVer, 0, wp, inputEqp, 0, false);
_wipProfile[key] = wipProfile;
}
}
//CHECK : jung (버전별 프로파일 확인여부)
public static decimal GetInflowQty(string productID, string productVer, string ownerType, FabStep step, AoEquipment aeqp, decimal inflowHour, int excludeStepCnt)
{
var job = InFlowMaster.GetJobState(productID, ownerType);
if (job == null || step == null)
{
return(0);
}
WipProfile profile = job.GetWipProfile(step, productVer);
if (profile == null)
{
profile = job.CreateWipProfile(step, productVer, excludeStepCnt, aeqp.Target.Preset as FabWeightPreset, aeqp, inflowHour);
profile.CalcProfile();
}
return(job.GetInflowWip(profile, inflowHour));
}
public WipProfile CreateWipProfile(
FabStep step,
string productVersion,
int exCludeStepCnt,
FabWeightPreset wp,
AoEquipment inputEqp,
decimal allowRundonwTime,
bool excludePreRun = false
)
{
decimal percent = 1;
List <JobState> jobList = new List <JobState>(1);
jobList.Add(this);
string prodVer = GetProductVersion(step, productVersion);
int loadedEqpCount = GetLoadedEqpCount(step, prodVer, false);
WipProfile profile = new WipProfile(this.ProductID, step, loadedEqpCount, wp);
AddTargetWaitWip(profile, jobList, step, prodVer, exCludeStepCnt, inputEqp, allowRundonwTime);
int stepCount = 1;
FabStep firstStep = step;
foreach (FabStep rStep in GetPrevSteps(step))
{
//if (step.IsCFShop)
// prodVer = Constants.NULL_ID;
//else
// prodVer = GetProductVersion(rStep, prodVer);
decimal qtyRun = 0, qtyWait = 0, tatRun = 0, tatWait = 0, tact = 0;
bool isExclude = stepCount <= exCludeStepCnt;
if (isExclude == false)
{
if (stepCount == 1 && excludePreRun)
{
qtyRun = 0;
}
else
{
qtyRun = GetStepWips(jobList, rStep, WipType.Run, prodVer);
}
qtyWait = GetStepWips(jobList, rStep, WipType.Wait, prodVer);
}
tatRun = GetAverageFlowTime(jobList, rStep, prodVer);
tatWait = GetAverageWaitTAT(jobList, rStep, prodVer);
tact = GetAverageTactTime(jobList, rStep, prodVer);
int eqpCount = GetLoadedEqpCount(jobList, rStep, prodVer, false);
if (eqpCount > 1)
{
tact /= eqpCount;
}
if (rStep.HasStepTime == false)
{
StepTat tat = rStep.GetTat(this.ProductID, true);
if (tat != null)
{
tatRun = (decimal)tat.RunTat * 60;
tatWait = (decimal)tat.WaitTat * 60;
tact = (decimal)(tat.TAT * 60) / SeeplanConfiguration.Instance.LotUnitSize;
}
}
decimal stayTime = 0;
if (qtyWait > 0)
{
stayTime = GetStayWaitTime(jobList, rStep, prodVer);
}
WipStep wipStep = new WipStep(rStep, tact, tatRun, tatWait, percent * qtyRun, percent * qtyWait, stayTime);
profile.AddWipStep(wipStep);
firstStep = step;
stepCount++;
}
WipStep inPlanWipStep = new WipStep();
inPlanWipStep.AddReleaePlan(this, firstStep, inputEqp);
if (inPlanWipStep.Pts.Count > 0)
{
profile.AddWipStep(inPlanWipStep);
}
return(profile);
}
